Used Cold Press for sale (14,384)

Condition: used, Technical details: pressure: 0,9 t daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm Lhodpsu Nfw Sjfx Amzjn weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation *

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Ledpfx Amjy Hkd Hezjhn Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, I am selling a tetno machine, connected, can be tested. Nominal force: 4000 kN Ram stroke: 1000 mm Passage between columns: 3100 mm Table clamping area: 3100 x 6000 mm Electric motor power: 15 kW Machine dimensions lxwxh: 6000 x 4150 x 4170 mm Press weight: 43800 kg Lodpfxexwlvpj Amzehn Can send a video of the machine, via whatsapp application

Year of construction: 1999, condition: used, Year of manufacture: 1999 Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Dimensions 2300*900mm Lhsdpfewnhicox Amzsn Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, pressing force: 300 t, DURENDUS 300 T Workshop Press – Single-Column Press – 1,600 mm clear width, 550 mm stroke The machine shown here was already manufactured and delivered for a customer order. We can produce this machine for you very quickly – and we are happy to take into account individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly to the specific project. * Tabletop with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Twist-resistant cylinder with manual stroke adjustment * V-profile straightening bolster in combination with the tabletop * LED lighting * Foot switch * Cooling ===== Technical Data + Information: ==== General Information * Design: Workshop press * Press force: 300 t (optionally adjustable) * Total weight: approx. 3,200 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,800 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram Ljdpfx Aey H Df Rsmzshn * Crossmember usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 330 mm * Piston rod: Ø 205 mm * Height adjustment: via chain mechanism ==== Speeds * No-load speed: 9.3 mm/s * Return speed: 15.2 mm/s ==== Hydraulics & Drive * Pump output: 48 l/min * Motor power: 22 kW * Hydraulic tank: 90 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connection power: approx. 23 kW ==== Equipment * Height-adjustable crossmembers with pin locking * Chain mechanism for table adjustment * Pressure gauge for pressure indication * Emergency stop switch * CE certification * Two-layer paint finish according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety regulation NR 12, which is based on these. Our great strength lies in special machine construction and press automation. We distribute custom-made hydraulic presses at surprisingly affordable prices. Leading European manufacturers' components are mainly used for the presses' hydraulics.

Condition: new, Year of construction: 2026, pressing force: 180 t, DURENDUS 180 T Workshop Press – Single-Column Press – 1,400 mm clear width, 400 mm stroke The machine shown here has already been built and delivered for a customer order. We can supply you with this machine from stock or manufacture it new – and are happy to take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The options listed are based on realized customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly for the specific project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral displacement of the press ram (900 mm) Bending tool Twist-proof cylinder with manual stroke adjustment V-profile straightening bolster in combination with the tabletop LED lighting Foot switch Cooling ===== Technical Data + Information: ==== General Information Type: Workshop press Press force: 180 t (optionally adjustable) Total weight: approx. 1,700 kg Overall dimensions (W × D × H): 1,900 × 900 × 2,700 mm ==== Working Area Lhsdpfx Asy H A T Tomzjn Clear width: 1,400 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Cross member usable width: 1,400 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 240 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 8.1 mm/s Return speed: 11.8 mm/s ==== Hydraulics & Drive Pump capacity: 22 l/min Motor power: 7.5 kW Hydraulic tank: 42 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 8 kW ==== Equipment Height-adjustable cross members with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, expelling, assembly operations, straightening operations, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the national Brazilian safety directive NR 12, which is based on these. Our great strength lies in the design and manufacture of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 120 t, DURENDUS 120 T Workshop Press – Single-Column Press – 1,250 mm clear width, 400 mm stroke The machine shown here has already been built and delivered to a customer. We can supply you with this machine from our stock or manufacture it new – and we will gladly consider individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the specific application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly to the project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral displacement of the press ram (900 mm) Bending tool Torsion-proof cylinder with manual stroke adjustment V-profile straightening bolster in combination with a tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Type: Workshop press Press force: 120 t (optionally adjustable) Total weight: approx. 1,300 kg Lhjdpfx Amoy Hqwgszon Overall dimensions (W × D × H): 1,800 × 900 × 2,550 mm ==== Working area Clear width: 1,250 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 200 mm Piston rod: Ø 125 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 7.7 mm/s Return speed: 12.6 mm/s ==== Hydraulics & Drive Pump output: 14.5 l/min Motor power: 4 kW Hydraulic tank: 29 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 4.5 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, extracting, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength is special machine construction and press automation. We distribute tailor-made hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 7,300 h, stroke length: 400 mm, operating speed: 140 mm/s, reverse speed: 180 mm/s, oil tank capacity: 350 l, overall weight: 14,800 kg, total length: 6,350 mm, total width: 3,590 mm, total height: 3,220 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, pressing force: 175 t, clearance between the columns: 3,550 mm, distance table to ram: 720 mm, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, EHT VarioPress 175-40, approx. 7300 operating hours, original EHT tooling, straight bending tool 420 mm x 4000 mm, split, forming pad 220 mm x 4000 mm, split, 2 sets of dies, split, pneumatic tool clamping system, top and bottom, automatic crowning, 2 x adjustable material support arms, table/punch distance, min.: 320 mm, table/punch distance, max.: 720 mm, Ledpfx Ame Aa Nz Sjzshn 3 stop fingers, manually adjustable, 2 sets of upper tools, 1 x forming pad 220 mm, 1 x straight tool 420 mm, original operating manual and electrical diagrams available, annual maintenance and safety inspection carried out, last maintenance in 2025.

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises. Lhodpfxoyr I Hne Amzjn

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 80 t Stroke rate: 125 strokes/min Total power requirement: 9.5 kW Machine weight: approx. 4.4 t Stroke and ram data Stroke: 20–120 mm Ram dimensions: 560 × 355 mm Ram adjustment: 72 mm Working area Overhang: 280 mm Table Lhodpfj Aa Ntnox Amzen Table width: 710 mm Table depth: 560 mm EQUIPMENT UVV – accident prevention regulation

Condition: used, Year of construction: 1990, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: Press brake Condition: good Performance Data Lhedpfx Amj Aa Aanjzon Pressing force: 80 t Bending length: 2,505 mm Frame width: 2,200 mm Total power consumption: 7.3 kVA Machine weight: approx. 5.6 t Control System Control: AMADA-MELDAS NC 9 F Controlled axes: 7 Dimensions Space requirement: approx. 3 × 2.25 × 2.20 m EQUIPMENT Detailed machine documentation available

Condition: excellent (used), Year of construction: 2022, Make: HSM Model: V-Press 1160 max Year of manufacture: 2022 Pressing force: 594 kN Ljdpfx Asz Snzijmzjhn Voltage: 400 V Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feeding opening dimensions: 119.5 cm x 65 cm

Condition: good (used), functionality: fully functional, Year of construction: 2003, Press force: 135 t Bending length: 4100 mm Frame width: 3600 mm Control system: DELEM Rapid traverse speed: 100 mm/sec Bending speed: 10 mm/sec Lhedpfx Aozg A D Nemzsn Total power requirement: 15 kW Machine weight (approx.): 11,700 kg

Condition: excellent (used), Year of construction: 1998, Thrust (tons) 200 Table size (x-y/mm) 1400 x 800 Ram dimensions X-Y (mm) 900 x 600 Stroke (mm) 20 - 200 Slide adjustment (mm) 120 Distance to top dead center (TDC)* (mm) 600 Type of strokes fixed Strokes per minute 45 Motor power (kW) 15 Type of safety devices hydraulic overload Ljdpe Adt A Ijfx Amzohn Equipped with a Millutensil feeding straightener and a Cattaneo die.

Condition: excellent (used), Year of construction: 2005, Shinohara 75 V H Year: 2005 Counter: 21 million 5 colors Maximum format: 520 x 750 mm Maximum speed: 16,000 sheets/hour Lodpe Adzguofx Amzshn Double impression cylinder

Condition: new, for 8 - 10 mm rope Lodpfx As Abhckjmzohn Packaging quantity: 1 Packaging unit: piece

Condition: new, Cold cleaner RFX 50l, price including disposal of the container RAPID * Suitable for the small parts cleaner, art. no. 9172 473502 * This cold cleaner is a low-odor solvent mixture without the addition of emulsifiers or surfactants Lhsdpfx Ame Adan Rjzen * Slow evaporation rate * Contains corrosion inhibitors Content: 50 l Packaging: Drum

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Lodpfx Aov Al Tiemzehn Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: used, Year of construction: 2012, saw blade diameter 400 mm cutting diameter 130 mm stroke 130 mm feed stepless 0 - 1.000 mm/min Lhodpfxo Ad Rlas Amzon rapid return speed 1.550 mm/min manual operated rotary table +/- 90 ° capacity 90 degrees: flat 300 x 40 mm capacity 90 degrees: round 130 mm material feed L41NC programmable length max. 9999,9 mm traversing speed max. 50 m/min total power requirement 3,50 kW weight of the machine ca. 1,00 t dimensions of the machine ca. 3,50 x 2,00 x H2,00 m Miter cut of +/-90, L41 NC electronic length stop, infeed and outfeed conveyor

Condition: used, Year of construction: 2001, pressure 200 t table surface area 1600 x 1300 mm ram stroke 600 mm dayligth 900 mm die cushion capacity 80 t die cushion stroke 150 mm die cushion area 1200 x 750 mm distance between columns 1650 mm table height over floor 1060 mm ram surface 1600 x 1300 mm oil volume 1400 l height over floor 3500 mm rapid drop speed 400 mm/sec drawing speed 42 (80 to) mm/sec drawing speed 20 (200 to) mm/sec return speed 325 mm/sec Control Siemens total power requirement 75 kW weight of the machine ca. 20 t Machine is with cushion in table (80 t), light guards and Siemens control for presses. Lodpfoz St Izex Amzshn

Condition: used, Year of manufacture: 2023 Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes Lhjdpfjzcmrkjx Amzen - Operating hours: 0 - Drive system: CNC - Press force [ton]: 240 - Max. working width [mm]: 4100 - Column gap [mm]: 3600 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 260 - Tools included: Yes - Control type: Delem DA-69T Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2010, Blade diameter 315 mm Lhodpfx Amjz Tfalszen 2 speeds Coolant system

Condition: good (used), functionality: fully functional, Year of construction: 2006, stroke length: 200 mm, overall weight: 11,600 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 2,850 mm, input voltage: 400 V, pressing force: 170 t, clearance between the columns: 2,700 mm, distance table to ram: 350 mm, table length: 3,100 mm, type of input current: three-phase, Equipment: documentation/manual, safety light barrier, Amada HFP 170/3 CNC press brake | 2006 | AMNC-PC | Wila clamping system Machine specifications Manufacturer: Amada Model: HFP 170/3 Year of manufacture: 2006 Condition: used, in good working order Control system: Amada AMNC-PC Tool clamping system: Wila Included: 1 set of tools Dimensions: approximately 4,500 × 2,000 × 2,850 mm Machine weight: approximately 11,500 kg Location: Waanrode, Belgium Description Amada HFP 170/3 CNC press brake from 2006, equipped with AMNC-PC control system and Wila tool clamping system. Lodjz S Nuqopfx Amzshn The machine is used but still in good working order. One set of tools is included in the sale. The machine is being sold due to the purchase of a larger press brake. Transportation can be arranged upon request. Can be loaded on October 21st in Waanrode, Belgium.

Condition: good (used), Year of construction: 1990, pressing force: 3,000 t, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Control system was renewed in 2012 Total power requirement: 75 kW Lsdpo Aawtvjfx Amzjhn Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: good (used), functionality: fully functional, Price starting from EUR 3,200 The press is ideal for gluing up to 4200 x 500 x 70 mm very practical and very space-saving 15 press cylinders (membrane cylinders) Press stroke per cylinder 70 mm, pressing force per cylinder 6800 N 16 pressure plates Transport dimensions: L 4.5 x W 1.1 x H 0.5 m Ljdpfxsg Uk Eij Amzehn Weight: approx. 600 kg