Used Coolant System for sale (44,473)

Year of construction: 2020, condition: used, The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the boxes, dispensing system, weight: 370kg, with documentation. An on-site inspection is possible. Lajdpfx Ahsz S Iwdjajh

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI Crane System as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,890 mm Support distance L: 5,590 mm Support distance B: 5,890 mm Beam length: 6,390 mm Overall dimensions of the system: approx. 6,590 x 6,590 mm UK crane bridge: 4,145 mm UK portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Lasdpfx Ajzgv U Uohaeh Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Rated current: 7.7 / 5.4 A FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Number of load chains: 2 Weight at 5 m lift: 65 kg Travel unit / Trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Conductor rail / Power supply Steel support and beam structure Documentation / Crane test book available Hoist test book available EC declaration of conformity (crane) available EC declaration of conformity (hoist) available Assembly and operating instructions available Accessories as shown in the pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operations Material handling Logistics Longest component: approx. 6.4 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam structure Control / Operating elements Main switch Documentation / Test book EC declarations of conformity Assembly and operating instructions Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Nikon Ljdpfsyiy Hbex Ahajah Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, KUKA Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. Lasdpfx Asy Dt D Dohaeh The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Iridex Type: IRIDEX OcuLight TX Iridex Laser Systems OcuLight TX IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, and cables. The OcuLight TX solid-state laser systems emit true green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system can result in undesirable side effects. OcuLight TX Ophthalmology: Retinal photocoagulation Laser trabeculoplasty Iridotomy Iridoplasty Laodpfx Ahozd Ut Rjaoh Otolaryngology: Stapedectomy Stapedotomy IRIDEX OcuLight TX Green 532 nm Laser Excellent efficiency with a powerful 2500 mW of laser energy provides pulse durations and pulse intervals from 10 to 3000 ms. Offers TrueCW laser pulses for maximum control and precision. Flexible range of delivery devices and a wide selection of handpieces for different surgical procedures. Optional remote control and wireless foot switch to reduce clutter and improve ergonomics and control. Quiet operation eliminates distractions. The lightweight, portable design is easily transported between treatment rooms and offices. IRIDEX OcuLight TX Green 532 nm Laser Green treatment laser: 532 nm Target laser: nominally 632 nm Cooling: On-demand whisper fan 10–3000 ms exposure duration and repetition interval Compatible with EndoProbe, LIO, OtoProbe, and SLA Power output: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW Weight: 6.4 kg Length: 15 mm Width: 30 mm Height: 30 mm Condition: used Scope of supply: (See picture) (Subject to changes and errors in technical data, information provided is without guarantee!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Item: inos iSENS laser sensors Item: inos iSENS laser sensors with control unit, cable, PC interface Laedpfx Ahezdn T Rjaeh Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Lasdpfxjzdtffo Ahajh Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Lajdszd Tlljpfx Ahajh Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Eos EOSINT P 380 Eos EOSINT plastic laser sintering system P380 The following items are included with the EOS P380 system: Build volume container Powder container Overflow container Cooler: Termo TEK thermochiller, type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8-zone process chamber heater, 250°C Each zone can be set individually, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Voltage 3/N/PE/ 400V AC Frequency 50 Hz Ljdpfezdywzex Ahasah Connected load 8 kW Fuse rating 32 A MAX. laser power 100 W Laser class (open) 4 Laser class (closed) 1 Weight 850 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, DSM Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Fastening system Condition: used Lasdpfezgabfsx Ahajh Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, BÖLLHOFF Type: 9524-640-824-5 RIVSET Punch Rivet System with Punch Rivet Pliers Operating voltage: 400V 50 Hz Rated current: 12A Main fuse: 35 A Control voltage: 24 V Signal voltage: 0-10 V with Hydac cooling unit OK-EL2S/3.0/M/400-50/1 max. permissible riveting pressure: 250 bar max. permissible riveting force: 78 kN Weight of the pliers: approx. 279 kg Year of manufacture: 2012 The system was inspected by the manufacturer and is fully functional. Ljdpezgaabsfx Ahaeah Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Laedpfxszgci Ee Ahaoh Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, DÜRR Ledpfjzgckcox Ahajah Type: DÜRR 1K adhesive application system Dürr 1K adhesive application system with drum pump, dispenser, and heated hose (approx. 5m). Technical machine description: Condition of the system: The drum pump, feed hoses, dispensing unit, etc., are contaminated with old adhesive and must be cleaned or replaced. The system has approximately 20 operating hours. The machine was used in a research facility. Year of manufacture: 2017 Air inlet pressure: Max. 6 bar Dimensions: Approx. 1.5 x 1 x 1.5 meters 1 adhesive control unit DÜRR (110017040) 1 single drum pump (110014004) Weight: approx. 300 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, RMS RMS Control and Measurement Technology – Vibration testing system with accessories For sale is a high-quality set from RMS Control and Measurement Technology, as well as a fan from Rietschle, ideal for vibration testing, resonance tests, and material analysis. Included devices: Lajdpfx Aezikdcehaoh RMS CONTROL AND MEASUREMENT TECHNOLOGY – Vibration exciter, type SW 6011, No. 2230 30 V – 200 A 13 mm / 1.2 m/sec / 100 g Mounting frame, type SWT 6211/1, No. 6074 – stable mounting for test objects Power amplifier, type TGE 10‑1/7 – for optimal control of the vibration exciter Rietschle SKG 410‑2.01 fan – high-performance vacuum/pressure blower Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Bosch Type: XR31-3 Laodpfjzdrzrjx Ahash Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Laserline Lasdpfx Aszdqkrshajh Type: LPC03 Lascon laser system with Lascon controller LPC03 Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +/- 10% Laser power: 550 W Supply voltage 100-264V +/- 10% Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Laser class 1 Type: LDM 500-60 Lascon controller LPC03 The LPC03 has the processing power of a complete PC in a very small space. Instead of a hard drive, a removable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is therefore ideally suited for tasks in the field of measurement, control and regulation in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also provides space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180 mm Drives: none Storage medium: removable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212 mm x 80 mm x 250 mm (height x width x depth) Protection class: Front: IP40 Environment: 15°C - 40°C Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, 3D Systems Type: ProJet 3000 HD Uninspected ProJet 3D printers The ProJetTM HD 3000 prints precise plastic parts for use in functional tests, as communication models, for rapid manufacturing, rapid tooling, and other applications. With features such as a wide selection of materials, various resolution modes, and ease of use, these office-friendly 3D printers accelerate and maximize your return on investment (ROI). Printing Modes: HD - High Definition Lsdezdnnuspfx Ahaeah UHD - Ultra High Definition Net build volume (xyz) HD mode: 298 x 185 x 203 mm UHD mode: 127 x 178 x 152 mm XHD mode: n/a Resolution: HD mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness UHD mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness XHD mode: n/a Accuracy (typical): 0.1 - 0.2% of part dimensions Accuracy depends on build parameters, part geometry, part placement, and post-processor settings Email notification: No Build materials: VisiJet® EX200 build material: Durable solid material with a long service life VisiJet® SR200 build material: Cost-effective, multi-purpose material. Available in natural, blue, or gray. VisiJet® HR200 build material: Available in blue, specifically developed for investment casting applications. Support material: VisiJet® S100 support material: Non-toxic wax material for melting the supports without manual intervention Power supply: 100-127 VAC, 50/60 Hz, single-phase, 15A Dimensions (L x W x H) printer without packaging: 737 x 1215 x 1504 mm Weight: printer without packaging: 254 kg ProJet Accelerator Software: Easy setup of the print job, template and queue management Automatic part placement and processing optimization tools Extensive part file editing tools Automatic support generation Job statistics Network compatibility: 10/100 Ethernet interface Hardware requirements: 1.8 GHz with 1 GB RAM (Open GL support 64 MB video RAM) or more Operating system: Windows XP Professional, Windows Vista, Windows 7 Supported file formats: STL and SLC Ambient temperature: 18-28 °C Noise level

Condition: used, VETTER Crane Technology PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist. For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,590 mm Support distance B: 5,100 mm Beam length: 6,170 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Travel unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Steel support and beam construction Inspection book available EC declaration of conformity available Documentation available Ledpfez Sn Ddox Ahasah Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Longest component: approx. 6.2 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam construction Floor control / operating elements Main switch Inspection book EC declaration of conformity Documentation Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Laedpfszimaaox Ahajh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Lasdpfxjzixy Se Ahaoh Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2014, Nominal volumetric flow: 5087 m³/h Negative pressure: 2700 Pa Filter area: 32 m² Motor: 7.5 kW Extraction nozzle: 300 mm Dimensions: 3600 x 1590 x 2535 mm Lajdpfsz Tzp Nsx Ahaoh Weight: approx. 905 kg Storage location: Supplier

Condition: used, mileage: 160,000 km, power: 302 kW (410.61 HP), first registration: 10/2009, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: white, gearing type: automatic, emission class: euro5, suspension: steel, Palift T18 18-ton system – HMF 1460 – High-level and ground-level control – 2 extension booms – Rotator and grapple function – External planetary axles – Rockinger coupling – 2 outriggers – permissible total weight 26,000 kg – tare weight 14,100 kg – wheelbase 3,875 mm – = Further information = Suspension: Leaf spring suspension Front axle: Steered Rear axle 1: Reduction: External planetary axles Rear axle 2: Reduction: External planetary axles Unladen weight: 14,100 kg Lajdpfx Ahoz Rzw Ueaoh Payload: 11,900 kg GVWR: 26,000 kg Reference number: 32 = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, This listing is for a Siemens Immulite 1000 Automated Immunoassay System The unit is in full working condition and ready for immediate use The Siemens Immulite 1000 is a compact benchtop automated immunoassay analyser designed for routine and specialised testing. It provides random-access operation, enzyme-amplified chemiluminescence technology and throughput of up to 120 tests per hour. It supports serum and plasma samples and offers a broad assay menu. Laodpfx Aexzhmfohaoh

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed Lodoxzh E Uepfx Ahaoah

Condition: used, This listing is for 1 of 4 Liferiver EX3600 Extraction System. The unit is in full working condition and is ready for immediate release. The Liferiver EX3600 is a cutting-edge, fully automated nucleic acid extraction system designed to enhance laboratory efficiency and convenience. Here’s a detailed overview of its standout features and applications: Key Features: - Versatile Sample Volume: The EX3600 can process a wide range of sample volumes, from 20 to 200 microliters, making it suitable for diverse applications and sample types. - High Throughput: Capable of handling up to 24 samples in a single run, the EX3600 significantly boosts productivity, particularly in high-demand research environments. - User-Friendly Interface: The integrated LCD screen provides clear, real-time monitoring of the extraction process, allowing users to easily track progress and make adjustments as needed. Ljdoxxyf Iopfx Ahaoah - UV Sterilization: Equipped with a UV lamp, the system ensures sterilization of the working area, which is crucial for preventing contamination and maintaining sample integrity. - Quick Processing Time: The entire nucleic acid extraction process takes approximately 20 minutes, enabling rapid turnaround for critical experiments, such as those in diagnostics or research settings. - Magnetic Bead Technology: Featuring a magnetic bar for efficient handling of magnetic beads, the EX3600 streamlines the extraction process, reducing manual intervention and minimizing errors. Applications: - Whole Blood and Plasma: Ideal for clinical applications, particularly in genetic testing or infectious disease diagnostics. - Serum Samples: Useful in biomarker discovery and research. - Cells: Supports cellular research and analysis. - Food Samples like Milk: Perfect for food safety testing and microbiological analysis. - Fecal Samples: Essential for studies in microbiome research or gastrointestinal health. - Specialized Use: - The EX3600 is particularly effective for extracting viral RNA, making it a valuable tool in the fight against infectious diseases, including COVID-19 detection. Trained laboratory personnel can prepare samples before utilizing the automated system, ensuring consistent and reliable results.