Used Cts Climate Chamber for sale (6,058)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Cgedpfxsy Hkd Hj Ad Nst Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Climate Test Chamber Type: CS-70/1000-5 Water-cooled condenser Year of manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for the simulation of various environmental conditions and is typically used in industrial, research, and quality assurance settings. It allows for precise testing under extreme temperature and humidity conditions, such as: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test chamber (1000 liters) and high-performance control system, it supports both rapid temperature changes and constant long-term tests. The system is water-cooled, ensuring stable and efficient operation. Technical data: Model: CS-70/1000-5 Test space volume: approx. 1000 liters Control system: - Multi-touch controller with integrated program generator - Programmable test sequences Side pipe / cable ports: - 1x port NW 50 - 1x port NW 125 Temperature range: - –70 °C to +180 °C - Change rate: up to 5 K/min - Temperature stability: ±0.3 K Climatic data (humidity): - Humidity range: 10% to 98% r. h. - Dew point range: –10 °C to +94 °C Dimensions: - External (HxWxD): approx. 1950 × 1270 × 2245 mm - Internal (HxWxD): approx. 900 × 1000 × 1100 mm Electrical data: - Connection: 400 V / 3/N / 50 Hz - Power: 17.6 kW - Rated current: 28.5 A Refrigeration system: - R452A – 5.1 kg – GWP 2140 - R23 – 2.1 kg – GWP 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar - Protection rating: IP 22 Cgsdpfxjy Hkc Ao Ad Njt Weight: approx. 900 kg For your safety as a buyer, please note the following: The following procedures are carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. Documented test run Condition: used The unit can be fully inspected as depicted in the photos. Display: STOP / manual mode Scope of delivery: - CTS climate test chamber CS-70/1000-5 - Delivery as shown in the photos Inspection by appointment is possible. Loading by forklift can be organized. (Subject to changes and errors in technical data!) We are happy to answer any further questions by phone.

Condition: excellent (used), CTS Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version With observation window, test specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in detail as shown in the images. Current display: manual operation / stop. Operating hours according to display: Technical Data: - Temperature range: -70 °C to +180 °C - Humidity range: 10% to 98% RH - Dew point range: -10 °C to +94 °C - Test chamber volume: 600 liters - Temperature change rate according to IEC 60068-3-5: - Heating: 6.0 K/min - Cooling: 7.0 K/min - Electrical connection: 400 V 3/N 50 Hz - Nominal power: 14.6 kW - Nominal current: 22.0 A - Protection class: IP 22 - Refrigerants: R404A / R23 - Pre-cooling stage: R404A – 4.5 kg - Cooling stage: R23 – 2.1 kg / 14.5 bar - CO2 equivalent: 17.65 t / 31.08 t - GWP: 3922 / 14800 - Operating overpressure PS: 25 bar - Test pressure PT: 27.5 bar Features / Equipment: - Observation window in the door - Stainless steel test chamber - LED test chamber lighting - CTS LCD control panel with digital controller - Test specimen protection / temperature limiter - Water-cooled refrigeration unit - Automatic water top-up / deionized water inlet - Test chamber and condensate drain - Volt-free contact - Digital outputs - RS232 interface - Ethernet interface - Lateral cable ports Cable ports according to installation plan: - 1x port NW 50 - 2x port NW 125 Test chamber dimensions according to installation plan: - approx. 850 x 850 x 830 mm External dimensions according to installation plan: - approx. 1900 x 1120 x 1875 mm Weight / Mass according to documentation: approx. 750 kg Scope of delivery: - CTS climate test chamber CS-70/600-5 - Including available documentation / test certificates - Delivery includes everything shown in the images Buyer assurance: - The unit can be viewed by appointment. - Loading by forklift can be arranged. - For any questions, please do not hesitate to contact us. Cgsdpfx Adjy Hkblj Njt Buyer safety information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used (Changes and errors in the technical data reserved!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: C-70/600 CTS Climate Test Chamber C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industry. The equipment is in used condition and can be inspected fully as per the images provided. Current display shows manual operation / stop, actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7% r.h., and water reservoir actual value 11.0 l. Technical Data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration unit for low temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Specifications: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Cgodpoy Hkazjfx Ad Not Specimen protection / temperature limiter Water connection / deionized water inlet Test chamber and condensate drain Tubing ports on the side of the chamber RS232 interface as per documentation Digital outputs for specimen control Test chamber dimensions (as per documentation): approx. 850 x 850 x 830 mm External dimensions (as per documentation): approx. 1900 x 1115 x 1850 mm Weight (as per documentation): approx. 600 kg Scope of delivery: CTS Climate Test Chamber C-70/600 including available documentation / operating manuals Scope of delivery as shown in the images For your safety as the buyer: The equipment can be inspected by appointment. Forklift loading can be arranged. Additional assurance for you as a buyer: The following measures are undertaken on all chambers offered: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Subject to changes and errors in technical specifications and details!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Type: CS-70/1000-5 Water-cooled Condenser For sale is a high-quality climate and temperature test chamber / environmental test chamber manufactured by CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is used to simulate a wide range of environmental conditions and is typically employed in industry, research, and quality assurance. It enables precise testing under extreme temperature and humidity conditions, suitable for: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulation Thanks to the large test chamber (1000 liters) and advanced control technology, both rapid temperature changes and steady long-term tests can be performed. Csdpfx Asyxmi Aed Negt The system is water-cooled, ensuring stable and efficient operation. Technical data: Control: - Multi-touch controller with integrated program generator - Programmable test sequences - Side cable port: 50 cm / 125 cm Temperature range: - Temperature: –70°C to +180°C - Heating rate: approx. 6 K/min - Cooling rate: approx. 5 K/min - Temperature constancy: ± 0.3 K Climatic data (humidity): - Climate temperature range: +10°C to +95°C - Humidity range: 10% to 98% rH - Humidity stability: - Range I: ± 1.5% rH - Range II: ± 3% rH - Dew point range: - I: +7°C to +94°C - II: –10°C to +7°C Dimensions: - Exterior (HxWxD): 1950 x 1270 x 2245 mm - Interior (HxWxD): 900 x 1000 x 1100 mm - Test chamber volume: 1000 liters Electrical data: - Connection: 400 V, 3/N, 50 Hz - Tolerance: +6% / –10% - Connected load: approx. 16.4 kW - Rated current: approx. 26.8 A Refrigeration system: - Refrigerant: R404A & R23 - Weight: approx. 900 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented trial run. Condition: used Scope of supply: (see photo) (Technical data and specifications subject to change and error!) For further questions, you are welcome to contact us by phone.

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Codeym U Syepfx Ad Nogt Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Cgodpfxjym U Inj Ad Njt Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: excellent (used), CTS Type: TW-60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature of -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Continuously variable capacity adjustment via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404A Control system: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test sample control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.1 to 0.5 K over time - Temperature change rate (measured in supply air, including test load and heat radiation): Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C - Test load: 420 kg solar cell modules, following 100% - Heat radiation: 3000 watts permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test load, without heat radiation, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions (approx.): width 4140 mm, depth 2680 mm, height 3000 mm - Internal chamber dimensions (approx.): width 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 48.9 kW - Nominal current: 74.9 A - Protection class: IP 54 - Cooling water connections: supply/return R1 ¼", internal thread Cgjdpfx Aovb Hanod Net - Condensate drain, non-pressurized: R1", internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text Cgedsvb E Uqepfx Ad Njt - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Type: CW-60/7 Walk-in Climate Test Chamber CTS Walk-in climate chamber 7 m³ Temperature & humidity testing from -60 to 120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. This is a professional walk-in climatic and temperature test chamber designed for industrial, research, and quality assurance applications. The system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from -60°C to +120°C - Climatic testing with 10–95% relative humidity - Programmable temperature and humidity cycles - Endurance stress testing - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Particularly suitable for: - Electronics testing - Solar modules (former application) - Automotive components - Materials testing - Endurance tests Airflow management ensures very uniform temperature distribution throughout the entire 7 m³ test chamber. Technical data: Temperature: -60°C to +120°C Change rate approx. 2 K/min Humidity: 10–95% r.H. Dew point range: +5°C to +89°C Refrigerants: R404A/R23 Max. allowable pressure: 25 bar III.6 Quick Start Instructions Volume: Test volume: 7 m³ Walk-in design (walk-in) Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection: 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP54 Weight: 4,000 kg Condition: used Delivery scope: (see pictures) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone. Cgodpfx Aoylxaxsd Net

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see image) Codsylmamjpfx Ad Nogt (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Temperature Test Chamber We offer you here a CTS temperature test chamber. Water-cooled Model series: T-40/600 Including metal support bars to increase floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Nominal power: approx. 5.5 kW Nominal current: approx. 8.5 A Refrigerant: R404A Weight: 550 kg Type: T-40/600 /011232 Important information for you as a buyer! Cedpfx Adsygup Sj Nogt The following steps are carried out on all our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refilled with legally-compliant refrigerant 3. After successful inspection, the chambers undergo a test run monitored by calibrated equipment. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the data!) If you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Here we offer you a temperature test chamber. Csdoyguprjpfx Ad Njgt Water-cooled Technical specifications: Temperature operating range Temperature range in °C: -70 / +180°C Temperature change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (approx.): Height 750 mm, Width 650 mm, Depth 720 mm External dimensions (approx.): Height 1800 mm, Width 850 mm, Depth 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Nominal power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Type: TS-70/350 Important safety information for buyers: The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) Further questions can be answered by phone.

Condition: excellent (used), CTS Temperature Test Chamber We are offering you a CTS temperature test chamber. Water-cooled CTS Temperature Test Chamber Technical specifications: Temperature operating range: Temperature range: -70°C to +180°C Cooling rate: 3.0 K/min Heating rate: 3.5 K/min Temperature stability, temporal: ≤± 0.3 K Dimensions: Test volume: 600 liters Cgedpfoygupfex Ad Njt Test chamber internal dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1120 mm, Depth approx. 1875 mm Operating data: Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Connected load: 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg Model: T-70/600 Important Information for Buyers! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) Cgodsygultspfx Ad Not External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Cgodjya Ev Nopfx Ad Not Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: used, Complete LOADING, CUTTING & DEBURRING LINE & UNLOADING, manufactured by RALC CTS CONNI OPTIONAL : AUTOMATIC ROBOTIC BUNDLING SYSTEM in squares/hexagonal bundles, with exit carriage and safety areas Model RALC LYBRA 450 + RALC SDB 100 – 5000 - Cutting range: 40-140mm - Bundle loader: 6,000mm - 12,300mm x 5Tn - Unloading: Up to 5,000mm - Optional: Automatic robotic packing system BUNDLE SPECIFICATIONS: Weight at loader: 5000 Kg Diameter max.: 600 mm Min. – max. tube length at entry: 6000 – 12300 mm Max. bending of the tubes at entry: 1.5 mm/m CUTTING Possible diameters with loader: - Rounds : 40 – 140 mm - Squares : 40x40 – 135x135 mm - Rectangles : 50x25 – 200x80 mm Max. tube weight: 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350-400-450 mm Disc holding acc. to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm Max. tube length at exit: 5000 mm DEBURRING Deburring unit Dimensions: - Rounds diameter: 20 – 102 mm - Squares: 30x30 – 70x70 mm - Rectangles: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz MITRE CUTTING With manual loading, it is also possible to make MITRE CUTTING Codpfx Aevt Tzcsd Njgt Cutting Capacity (without loader) Round tube: - At 90º: 100 – 125 – 145 mm - At 45º: 90 – 115 – 135 mm - At 30º: 80 – 95 – 110 mm Squares: - At 90º: 90 – 110 – 130 mm - At 45º: 80 – 100 – 110 mm - At 30º: 70 – 80 – 90 mm Rectangles: - At 90º: 140x70 – 160x90 – 180x110 mm - At 45º: 110x60 – 130x70 – 150x70 mm - At 30º: 80x40 – 100x50 – 110x60 mm SCOPE OF SUPPLY 1. Loader Mod. CM5FT12 for 5000 kg bundle from 5000 to 12300 mm length 2. Cutting unit Mod. LYBRA C450 with: - Micro-lubrication - Air blowing - Chips conveyor - Tilting carriage - Unloading clamp 3. Deburring unit Mod. SDB100 5000 4. Exit collecting cradle with endless slings 5. Complete electrics & hydraulics 6. Existing documentation * 7. Existing spares * *To be checked before order OPTION : Front collecting automatic portal with robot, capable of packing round, square, or rectangular tubes in hexagonal or square bundles Cutting range: 40 - 140 mm Bundle loader: 6.000 mm - 12.300 mm x 5 Tn Unloading: Up to 5.000 mm Optional: Automatic robotic packing system Bundle weight at loader: 5000 Kg Bundle diameter max.: 600 mm Tube length at entry: 6.000 – 12.300 mm Bending of the tubes at entry: Max. 1.5 mm/m CUTTING Possible diameters with loader, rounds: 40 – 140 mm CUTTING Possible dimensions with loader, squares: 40x40 – 135x135 mm CUTTING Possible dimensions with loader, rectangles: 50x25 – 200x80 mm Tube weight: Max. 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350 - 400 - 450 mm Tube length at exit: Max. 5.000 mm DEBURRING Rounds diameter: 20 – 102 mm DEBURRING Squares dimensions: 30x30 – 70x70 mm DEBURRING Rectangles dimensions: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal struts to increase the floor load-bearing capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety, please note the following information! The following steps are performed on our chambers in advance: Csdpjwfdniofx Ad Nogt 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg Codpfx Adoup T Uqe Njgt The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Cgjdpfevba Raex Ad Net Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Csdpfxsrivfce Ad Nsgt Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Codjvitmdspfx Ad Nsgt Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Cgodpfx Adju U Ixms Not Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Cjdpjihb Amsfx Ad Negt Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Cgjdovcyawepfx Ad Not Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.