Used Dan - List - Denmark Morso for sale (5,267)

Year of construction: 2024, condition: new, machine/vehicle number: SPIN500, Co-lead Spin Dryer is a small-sized vegetable centrifuge machine that removes excess water from leafy vegetables and other fresh produce. The basket with the product is placed in the machine and once the lid is closed, the engine will start running. A magnet locks the lid during centrifuging. Suitable for dewatering leafy vegetables, fruit, and vegetable material surface after cutting. The body is made of SUS304 stainless steel, which has a delicate appearance. It is equipped with a basket for dehydration, which is more convenient to store. The machine can set the dehydration time and Lodpfx Aieiniz Djisab dehydration speed, and the operation is stable. It is suitable for all kinds of fruit and vegetable industries, and large and medium-sized industrial catering enterprises’ demand for vegetable dehydration. * Use frequency conversion centrifugal technology to complete the surface dehydration of the material; * Use frequency conversion technology and optical sensing technology to realize the draining time and speed, and turn on and off control. * Full open design, easy to install and take out during Vegetable Processing. * Driving by frequency conversion adjusting speed three or single asynchronous motor, stable running, convenient for speed adjustment

Year of construction: 2020, operating hours: 0 h, condition: new, machine/vehicle number: AEBC120, Double-walled boiling kettle. Thanks to the indirect heating system, where heating is made via glycerin heated by electric heaters – there is no need for installation to any pipes, just connect to electricity and you can start working. Indirect heating avoids direct contact of the heater with the cooked dish, which prevents it from burning. The kettle is used in many food industries – vegetable preparation, brewing, meat processing, restaurant, and fast food industry. General Features: The kettle is made from food-grade stainless steel Volume - 120l Indirect heating prevents products from burning(products are heated from all kettle sides). Maximal temperature, that can be reached in the product is +120 C degrees. Can be equipped with mixing elements; Easy to clean, can be washed with low-pressure water; Tap for product outlet; Wheels with a fixation for easy transportation. Simple controls and no need for yearly service, only change electric elements when required (because heating is done via glycerin heating elements last very long); Ledpfx Aieffwffoisab For different electrical connections and feel free to ask us;

Condition: good (used), Year of construction: 1999, Technical specifications Ø: 1100 mm Rectangular: 1300 x 1100 mm Laodpfsv Tzxvjx Aiieb

Condition: good (used), Plastic sheets, plastic laminate, spring plates, leveling plates -Manufacturer: Lista, plastic spring plates, 210 pieces Lajdpjgrvdqjfx Aiijb -Plate: 280 x 60 x 8 mm, 40 pieces -Plate: 40 x 60 x 1 mm 170 pieces -Sale: only complete set -Total weight: 11 kg

Condition: new, functionality: fully functional, cutting height (max.): 210 mm, overall weight: 1,100 kg, saw blade diameter: 600 mm, disc diameter: 120 mm, spindle diameter: 30 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, plate length: 2,800 mm, plate width: 2,070 mm, table length: 3,200 mm, Manufacturer: DANIBRUM – Romania Sliding table length: *optional 3670 – 3800 mm, 3200 mm Sliding table width: 430 mm Cutting length: 3400 mm, 3670 – 3800 mm / optional Cutting width on the right side: 1300 mm Maximum cutting height at 90°: 210 mm Maximum cutting height at 45°: 120 mm Blade diameter (Ø): 280 – 600 mm Blade bore diameter (Ø): 30 mm Scorer bore diameter (Ø): 20 mm Main blade speeds: 4500 rpm, 5000 rpm Scorer blade speed: 8200 rpm Scorer height adjustment: yes Ljdpfsy A Nxbsx Aiieab Scorer cutting depth: 10 mm Main blade height adjustment: electric Motor power: 5 kW, 7 kW – optional Scorer motor power: 1.1 kW Extraction hood diameter (Ø): 100 mm Overall dimensions: 3600 x 3700 x 1800 mm Model: PRISMA 5

Year of construction: 2004, condition: good (used), Extraction table for grinding/bonding work in very good condition. Lsdpfxeywh Azs Aiioab

Condition: used, functionality: fully functional, For sale are 2 industrial multiplex refrigeration units in robust design, equipped with multiple Bitzer piston compressors. The units originate from an operational site and have been professionally dismantled. Ideal for continued use, retrofit projects or export. Laedpjyxvqcsfx Aiieb Scope of delivery: - Complete multiplex system - Fitted Bitzer compressors - Control cabinet/controller Condition: - Used - Dismantled from a working installation - Age-related signs of wear - Sold without warranty

Condition: good (used), working width: 1,050 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, overall weight: 220 kg, working length: 1,050 mm, max. working width: 1050 mm for metal sheets up to: 2 mm opening width top clamping bar: 60 mm weight: 220 kg space needed: 1380 x 550 x 990 mm Ledpfx Aoui Ikrjiioab

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front Lodpfx Asyuzcuoiijab - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, sheet thickness steel (max.): 2 mm, warranty duration: 12 months, working length: 6,400 mm, Immediately available Thalmann TZ 200 / 6.4 m TZ Series Single Folding Machine Working length: 6400 mm 6 machine frames Sheet thickness: 2.00 mm at 400 N/mm² Equipment: VFD (vertical force drive) Continuous control shafts Manual crowning (optionally dynamic) Lodewlq Naopfx Aiisab 3D graphic control Back gauge 1250 mm Folding rails 10/10 and 17 mm Motorized back gauge, 1250 mm range with 6 fingers Electric longitudinal cutter Automatic crowning and radius adjustment Curved folding beam Hardened tools in clamping and folding beams - Hardox LED bending illumination M-Guard for remote diagnostics directly from the factory

Condition: good (used), machine/vehicle number: 0155, Year of construction: 2009, Dana 340TE17313-40 from Uniktruck Ljdpfxeyuhfio Aiisab

Condition: good (used), machine/vehicle number: 0153, Year of construction: 2014, Dana 15.7TE 32418-81 from Uniktruck Lasdpfx Aoyuhfcsiiob

Condition: good (used), machine/vehicle number: 0138, Year of construction: 2008, Dana DANA TRANSMISSION from Uniktruck Lsdpeyuhb Rofx Aiijab

Condition: good (used), machine/vehicle number: 0136, Year of construction: 2009, Dana 13.9TE10313-25 from Uniktruck Ledpfeyuhb Dsx Aiieab

Condition: good (used), machine/vehicle number: 0135, Dana TE10 from Uniktruck Laedsyuhbwepfx Aiiob

Condition: good (used), machine/vehicle number: 0134, Year of construction: 2008, Dana 13.9TE10319-25 from Uniktruck Lasdpfoyuhbqsx Aiieb

Condition: good (used), machine/vehicle number: 0130, Year of construction: 2007, Dana 13.9TE10313-20 from Uniktruck Lasdsyuhbkopfx Aiiob

Condition: good (used), machine/vehicle number: 0123, Year of construction: 1995, Dana T32.000 from Uniktruck Ledpfoyuhayex Aiisab

Condition: good (used), machine/vehicle number: 0121, Year of construction: 1998, Dana T32.000 from Uniktruck Ledoyuhatspfx Aiisab

Condition: good (used), machine/vehicle number: 0119, Year of construction: 1997, Dana T32.000 from Uniktruck Laodpfx Aisyuhameisb

Condition: good (used), machine/vehicle number: 0106, Year of construction: 2005, Dana 1204FT20213-100 from Uniktruck Lajdjyug Ucopfx Aiieb

Condition: used, Year of construction: 1971, weight max. 1000 kg workpiece length . mm Laedpfx Aeyuqdbsiiob work piece width . mm Drive elektr. dimensions of the machine ca. 4,2x2,1x2,2 m

Condition: ready for operation (used), Year of construction: 2008, total height: 2,275 mm, total width: 4,040 mm, overall weight: 13,400 kg, product length (max.): 7,033 mm, number of axes: 2, Centerless grinding machine manufactured in 2008. This DANOBAT 327 MDA features a maximum wheel width for plunge grinding of 500 mm and a peripheral wheel speed of 50 m/s. It has a grinding wheel motor power of 55 kW and a regulating wheel speed that is infinitely variable from 10 to 225 min⁻¹. If you are looking to get high-quality grinding capabilities, consider the DANOBAT 327 MDA machine we have for sale. Contact us for further details. • Gross mass: 14,500 kg (including packaging) • Opening between wheels: 3 to 200 mm (with new wheels) • Maximum wheel width for plunge grinding: 500 mm • Wheel axis height from floor: 1150 mm • Grinding wheel dimensions (OD x width x ID): 650 x 500 x 304.8 mm • Minimum grinding wheel OD: 510 mm • Peripheral wheel speed: constant 50 m/s • Regulating wheel dimensions (OD x width x ID): 350 x 500 x 203.2 mm • Minimum regulating wheel OD: 275 mm • Regulating wheel speed: stepless 10 to 225 rpm • Regulating wheel head inclination (part feed): -5° to +5° • Regulating wheel carriage swivel (taper correction): -2° to +5° • Maximum wheel profile depth: 12 mm • Maximum profile inclination (via tracer template): 30° Ljdjyvfvhopfx Aiieab • Dresser feed rate (grinding wheel): 100 to 300 mm/min • Regulating wheel dressing speed: 225 rpm • Dresser height adjustment: mm • Grinding wheel motor power: 55 kW • Regulating wheel motor torque: 8 Nm • Dresser motors (each): 0.55 kW • Grinding head lubrication pump motor: 0.37 kW • Grinding head lubrication system: 100 l capacity, 6 l/min flow, 2 MPa (20 bar) safety valve, oil FD-5 (ISO 3498) • General lubrication system: 6 l capacity, oil G-68 (ISO 3498)

Condition: used, Reportedly unused Ralph Coiden model CB460 Hykarb block heat exchanger. Approximately 39.7sqmt heat transfer area. Process side rated 5.2 bar design pressure at -40 to 165 deg.c. Service side rated 5.2 bar design pressure at -40 to 165 deg.c. Lasdpfxeym T Rho Aiisb

Condition: excellent (used), see pictures; further extensive clamping devices available! Laedpfx Aoha U U Rjiiob Please contact us if you are interested !