Used Demaq Cross-Sectional Line for sale (14,413)

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Ncjdpfxjlwtzyj Akujt Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Ncsdpfx Aorn Sqhskujt Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Nodpoihf Tpofx Akuect Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Ncedpfx Akoixqg Njuot Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment Ncjdpsihf Twefx Akujt 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Njdpfowu Agcox Akuect Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: used, Year of construction: 2000, Used Rondo line. Ncsdpfx Asx Swucokujt We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Kemper Multimatic (year 2004), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, We offer this used Kemper Multimatic spiral mixer, year of construction 2004. Manufacturer: Kemper Model: Multimatic Njdpfx Akex R Ugmeujct Year of construction: 2004 year Condition: used Category ID: 1005 Type ID: 187 Machine type: Dough line for hamburgers and hot dog buns We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Rondo ZGP665.C (year 2000), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1990, condition: used, Complete NID Moulding Line To include NID M301-S-357 Starch Mogul Candy Moulding Line NID Vortex-S Starch Dryer Starch Trays Nsdpoy Uk Alofx Akuoct 6 colour capability Approximately 20,000 trays

Condition: good (used), Year of construction: 2007, Ref:11104 . 2007 Kolbus KM473 Ratiobinder Line 8,000 p/h EVA perfect binding line with gauzing. Equipped with: 18 station ZU 804 gatherer with over track feeding including 2 x hand feed AS 800 reject station for over or incomplete books Downstream delivery belt Ratiobinder KM473 - 24 clamps with ‘Co-pilot’ touch-screen monitors Milling/brushing, equalizing milling & brushing units Interchangeable gluing system comprising; Kolbus LH370 EVA hotmelt pre-melters EVA hot-melt spine glue EVA hot-melt disc side glue Gauzing unit Pile cover feeder with scoring 2 x Cover nipping/pressing stations Flat TS.Z conveyor system to (2010) Kolbus HD143.P pile trimmer with ‘Co-Pilot’ pre-setting Ncjdpfx Akoy T Ii Hjuet Specification: Book size, Max: 383 x 320 mm Max: 460 x 190 mm Min: 105 x 100 mm Book thickness : 3 -- 70 mm Mechanical speed, Max: 8,000 cycles/hr.

Condition: new, Year of construction: 2026, Ref:10804 . NEW 2026 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) LoCo friction feeder – inner text LoCo friction feeder – top Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Ncjdpfx Aot Dpwdskuet Including accessories & spare parts. (In-house compressed air supply required). Specification: Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line Application: Pharma dental sticks Year: 2023, never used, still in original packaging Nsdpjxr Hgxefx Akuect

Condition: excellent (used), Year of construction: 2012, working area X .. 370 mm working area Y .. 700 mm pressure 28.0 t plate thickness max. 12.7 mm ST Njdpfx Aksy Umdfoujct throat 310 mm height of stroke 0 - 40 mm no. of strokes max. 180 Hub/min punch diameter max. 105 mm 845 x 1420 mm work height max. 900 mm oil volume 50.0 l total power requirement 5.0 kW weight of the machine ca. 1800 kg range L-W-H 1800 x 1200 x 1500 mm New price including accessories approx. 35,000 euros Special price on request !! The machine was used continuously in a test area and as a result has very few operating hours !!! The ECCO LINE hydraulic punching machine has been specially optimized for the processing of sheet metal and profile parts. It is characterized by its The machines of the ECCO LINE series are equipped with a punching force of LINE series are equipped with 28 tons of punching force in conjunction with the proven Trumpf tool system. Tool change time approx. 15 sec (manual) Mode of operation: After installing the tool, the stops are positioned in X and Y are positioned accordingly and the material is pushed against the stops. By the hole is then punched by pressing the foot pedal Features of the machine: - Maintenance-free hydraulic drive - Stepless stroke adjustment - Compact unit - Constant punching force Features: - Robust electro-hydraulic hole punch - TRUMPF tool system with many insert tools - Stop system with digital displays * Magnetic scale integrated into the side of the machine table * Scanning head integrated in the stops * Energy guiding chains for supply line to the scanning head * Evaluation electronics * Position indicators mounted on the stops * Stake-out device for zeroing the axes * Readout accuracy /- 0.1 mm - Control panel: set-up, single and continuous stroke - Stepless stroke height adjustment - Free-moving foot switch * with many punching tools !

Condition: excellent (used), Year of construction: 2019, Wanrooe Grinding Line Year 2019 Consisting of a single shaft crusher, a conveyor elevator of approximately 4 meters with suction installation Nedjwqtuispfx Akusct

Year of construction: 2026, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Revamped 2026 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle Nsdsymav Rjpfx Akuect 7 Finished bundle storage unit 8 New Electrical control panel with operator control desk 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Bundle weight: Max. 2Tn

Condition: used, Brand: Subal Model: T20 Year of manufacture: 2010 Compliance: CE standard Integrated equipment: - Automatic dough divider-rounder - Intermediate proofing station Nedpsym Uk Aefx Akuect - Horizontal moulding machine - Optional small bun cutting up to 50 g Performance & Production: - High productivity for bakeries and industrial workshops - Automated operation for optimum time savings - Consistency and precision in moulding Ideal for: Industrial bakeries Large pastry shops Bread production facilities

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Type - CT 2612. Serial number - 98 949. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Njdpfx Aey Swi Hjkusct Capacity / Output - up to 36 fillets / minute (was only being run at 10 fillers / minute). Size of fillet - between 0.5 kg up to 4 kg. Video available on request.

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. Ncjdpfxey Rflys Akuot The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, !!! Attention: Only the conveyor system is being offered here !!! Offered here is a floor conveyor system for a wheel rim painting line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight sections) - Trolleys with mounts for automotive rims - Rotating rail: on this track, the rim rotates during the painting process to ensure an even application of paint - Conveyor motors (without control unit) Nedpsy Ui Awofx Akusct Total length: approx. 150 m Maximum part diameter: 550 mm Maximum part height: 400 mm The system is suitable for both wet paint and powder coating applications. No control system is included in the scope of delivery. The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before commissioning. Two additional systems are available as well. These versions are suitable for curing processes in an oven.

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Ncedpfsqy Em Nsx Akust Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: used, machine/vehicle number: 008047, Position 1: Brushing Machines SCM-BRAVOROBOT P1 Position 2: spraying machine SCM-BRAVOROBOT P1 Position 3: Roller Conveyors SCM-BRAVOROBOT P1 Position 4: Compressed Air Dryers SCM-BRAVOROBOT P1 Position 5: Ovens SCM-BRAVOROBOT P1 Nodpfew Idbyex Akuect

Condition: used, Norpak Magazine Sorting and Polywrapping Line, Variable Size Infeed Hopper A4 - A5, In Leaf Capability, 4 Document Feeder A4 - A5, Poly Wrap Station with Heated Sealer Bars & Cut Off, Outfeed Conveyor, 8m x 3m Foot Print, Including Extraction System. S/No. 0701047 (Selection of Polywrap & Potato Starch film) Ncedpfey Sg S Rox Akuot Location: These lots are located in Aldridge, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, 2 x "Inotec" Twin shaft paddle mixer 2.600L Type IPM 2000 all stainless steel Nedpfxoy Th Trs Akusct twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard with weighing cells 18 kW in very good condition in good working order + 2 x Outfeed conveyor belt” Type IFB 1300/800 all stainless steel comes under the discharge guards of the mixer plastic belt 0,7 kW outfeed height ± 1.200 mm in a eurobin / Dolav in very good condition in good working order + 2 x Loader for eurobins Type IHV 2000-300 all stainless steel for 200L or 300 L eurobins dimensions: (L x W x H): ± 900 x 1.300 x 4.020 mm 1,6 kW in good condition in good working order + Elevating spiral screw with infeed belt Elevating spiral screw Type IFS 5600/400 all stainless steel mobile 5,3 kW screw diameter 400 mm Loading height 800 mm Unloading height 3.200 mm dimensions: (L x W x H): ± 5.200 x 2.500 x 4.450mm in very good condition in working order + Infeed belt all stainless steel white pvc belt belt width 700 mm belt length 2.500 mm Unloading height 2.800 mm in good condition in good working order + control box Type IPL 05-02-N Total 58 kW 3x 400V -50Hz 98A Year of construction 2003 dimensions: (lxwxh) : ± 1,800 x 550 x 1,800 mm PLC control system Siemens S7-300 + Simatic panel OP270 + inspection platform The machines will be fully inspected and tested both mechanically and electrically. Parts showing visible wear will be preventively replaced in our workshop.

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition Ncodeu Icghepfx Akust *

Condition: used, Year of construction: 2017, Technical details: Ncjdevvvrpopfx Akujt operating pressure: 12 bar container volume: 200 l Total weight, approx.: 220 kg dimensions L x W x H: 1,2 x 1,1 x 1,8 m Mobile pressure blasting pot - Sand blasting system Blasting tank pressure up to 12 bar Test pressure 17.2 bar Ideally equipped with: -with remote control valve -with remote control lever -with electro-pneumatic remote control -with carbide spray nozzle incl. 10 m nozzle hose i.D. *