Used Die Magnetprofis Pem620X520X200Ndfeb for sale (4,248)

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Blodpfjxy Nkpex Ahmsn Available immediately

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06I/9048, Offer Number: M06I/9048 Machinetype: rotating 3 - die header Blodpfx Aexcxzpehmjn Make: HILGELAND Type: HC5-40A Constr. year: 1990 diameter range: 6 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 600 Location: Germany

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001 Bedpfx Ahjwc Tdzjmoln

Condition: good (used), Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool Bsdpfx Asxupnqjhmsln -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: M08L/8623, Offer Number: M08L/8623 Machinetype: 4 die - 3 blow transfer header Info: PKO Make: ESSEBI Type: RCF 36-R Constr. year: 1993 diameter range: 3,8 - 6,5 number of dies: 4 number of stations: 4 cutting length: 52 mm Bedpfowi Swmex Ahmeln shaft length under head: 6-35 mm output - pieces/min: 250 press power: 55 to Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M14L/8732, Offer Number: M14L/8732 Machinetype: thread rolling machine - flat die Info: with washer assembly Make: HILGELAND Type: FN-6/60 Constr. year: 1990 diameter range: 6 mm shaft length under head: 80 mm max. thread length: 62 mm Blsdswi Szxjpfx Ahmen output - pieces/min: 450 Location: In our warehouse

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: M08L/8065, Offer Number: M08L/8065 Bjdpfowi S I Eox Ahmeln Machinetype: 4 die - 4 blow transfer header Info: bushing cut-off , PKO Make: MALMEDIE Type: K64 Constr. year: 1981 diameter range: 16-30 mm number of dies: 4 number of stations (incl. cut off): 5 cutting length: 235 mm shaft length under head: 180 mm output - pieces/min: 90 press power: 380 to Location: In our warehouse

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M08L/7162, Offer Number: M08L/7162 Machinetype: 2 die - 3 blow transfer header Info: bushing cut-off Make: HILGELAND Type: CF5AZ Constr. year: 1979 Bodpjwi Tavsfx Ahmeln diameter range: 8-16 mm number of dies: 2 number of stations (incl. cut off): 4 cutting length: 160 mm shaft length under head: 130 mm output - pieces/min: 100 Location: In our warehouse

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Bledpfoyaq S Ajx Ahmon Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Year of construction: 1968, condition: ready for operation (used), AUTOPLATEN BOBST SP 1260 E / AUTOMATIC FLATBED DIE-CUTTER STRIPPING / Year Of Production: 1968 / Max. Sheet Size: 1.260 x 920 mm / Min. Sheet Size: 500 x 350 mm / Maximum Speed: 5.000 Sheets Per Hour / Max. Solid Board Thickness: 1,5 mm / Max. Corrugated Board Thickness: 3 mm / Maximum Cutting Pressure: 500 Tons / Weight: 19 Tons / Main Dimensions: 6.075 x 2.840 x 2.200 mm Bsdpsx R R R Usfx Ahmjln

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 320 mm, table width: 320 mm, table length: 560 mm, TECHNICAL DETAILS Bedjya Efwjpfx Ahmeln X-axis travel: 320 mm Y-axis travel: 220 mm Z-axis travel: 320 mm Maximum workpiece dimensions: 880 mm x 550 mm x 225 mm Table dimensions: 560 mm x 320 mm MACHINE DETAILS Control: Charmilles Weight: 3,500 kg

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM 300 Year of manufacture: 2014 Die-sinking EDM machine in C-frame design (fixed table) with automatic lowering tank Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Table dimensions: 750 x 600 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg Innovative ISPG Generator (Intelligent Speed Power Generator) for maximum efficiency Maximum working current: 80 amps Surface finish up to Ra 0.08 µm AC FORM HMI with intuitive user interface & touchscreen Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Pneumatic chuck of your choice (Erowa or 3R Systems) Includes 6-position electrode changer LTC Machine dimensions: 2265 x 2110 x 2780 mm Total weight: 4,500 kg The machine will be cleaned, overhauled and extensively tested prior to sale to ensure the highest quality and reliability. We are also happy to offer you additional services: - Transport Bsdpex Sv E Hefx Ahmsln - Commissioning - Training - Accessories such as clamping devices

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot consistency. Blodpfxsy E Tynj Ahmjn Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC suitable for DAW 50F and W50Zn

Condition: new, Outer dimensions (width x height): 80 x 80 mm Bjdpfx Asy N S Irehmeln Overall length: 6050 mm Divided into: 2x25/30/35/40/45/50/3x100/11x500 mm Permissible load: 200 t/m Material 42CrMo4, hardened (plasma deep-nitrided: hardness approx. 700 HV, 58 - 63 HRC, depth 0.4 - 0.5 mm), ground

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Blsdsy Rumajpfx Ahmjn Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Bledpfx Aey Rummshmen Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 415 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, table length: 840 mm, TECHNICAL DETAILS Table size: 840 x 600 mm Dielectric fluid above table: 360 mm Maximum workpiece weight: 1,000 kg T-slots: 4 x 10 mm Distance table - quill without chuck max: 595 mm Distance table - quill without chuck min: 180 mm Travel X-axis: 565 mm Travel Y-axis: 400 mm Travel Z-axis: 415 mm Resolution X - Y - Z: 0.001 mm Resolution axis C: 0.001 Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg MACHINE DETAILS Dimensions & Weight Dimensions (H x W x D): 2760 x 1110 x 1840 mm Weight: 2,750 kg Dielectric supply Tank capacity: 400 liters Paper cartridge filters: 4 pcs Generator Dimensions (H x W x D): 1800 x 600 x 920 mm Bedoyzn Ryjpfx Ahmoln Weight: 300 kg Rated current: 60 - 120 A Connected load: 15 - 23 kVA

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M08E/9110, Offer Number: M08E/9110 Machinetype: 2 die - 3 blow transfer header Make: NAKASHIMADA Type: NP80 Constr. year: 1992 diameter range: 10 mm number of dies: 2 number of stations (incl. cut off): 4 Bodpfx Asyya Rpehmsln cutting length: 100 mm shaft length under head: 80 mm output - pieces/min: 150 press power: 60 t Location: Europe

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M14I/9096, Offer Number: M14I/9096 Machinetype: thread rolling machine - flat die Make: PELTZER-EHLERS Type: NKW-16 Constr. year: 1977 Blodpfx Ajyya Sgohmsn diameter range: 8-16 mm shaft length under head: 25-160 mm max. thread length: 80 mm output pieces/min: 100 Location: Germany

Condition: used, functionality: fully functional, overall weight: 4,500 kg, Drossert die-cutting press, working area 72 x 102 cm, 1 frame, various operating modes, single cycle, continuous operation, programmable with timer, safety mats. Bodpsyu H Ivsfx Ahmjln

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, Charmilles Roboform 350 Year of manufacture: 2007 Blodpfxoyu N Ske Ahmsn C-frame sinker EDM machine Fixed table with lowering tank Travel (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (choice of one) Maximum electrode weight: 50 kg Without electrode changer Charmilles DPControl operating interface Operation via 12" LCD color touchscreen Keyboard and hand pendant also available Machine dimensions: 1900 x 1690 x 2522 mm Total weight: 2800 kg The machine will be cleaned and serviced by us upon receipt of order. Afterwards, an EDM test will be performed. We are happy to commission the machine at your site and provide operator training. Optional: - Transport - Cooling unit - Dielectric fluid - Clamping devices

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 7/787, Max. Die-Cut Size : 230 x 230 mm Min. Die-Cut Size : 10 x 10 mm Blsdezcd Atspfx Ahmen Die-Cutting Pressure (Maximum) : 5700 Kg Max. Stack Height : 170 mm Die-Cutting Strokes max. : 11 p/min Technical data can vary according to job, consumables and possible other factors

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, GF AgieCharmilles FORM 2000 Year of manufacture: 2008 C-frame design, fixed table with lowerable container Travel ranges (X/Y/Z): 400 x 300 x 350 mm Table-to-spindle distance: 170-520 mm Max. workpiece size: L x W x H = 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and erosion (U = 0-100 RPM) Pneumatic chuck (optional: Erowa/3R Systems) ISPG generator with 60 Amperes Best achievable surface roughness Ra 0.10 µm AGIEVISION 5 control panel 15” LCD color screen, mouse or touchscreen, jog shuttle and hand control Includes CAPA electrode changer - 40 electrode positions - 4 pallet positions Bledszgt H Iopfx Ahmen Net weight of the machine: 3830 kg Machine dimensions: 1410 x 2460 x 2660 mm The machine will be cleaned, serviced, and tested by us after the order is received. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Year of construction: 2000, condition: good (used), BOBST SP 104 E Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Blsdpoyz Adnjfx Ahmjn Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: refurbished (used), Year of construction: 2023, TRANSFER HEADERS SACMA SP22 2 DIE 2 BLOW Completely overhauled - Like new semi-tubular group installed Diam. 10x100 mm. Machinetype: 2 die – 2 blow transfer header Diameter range: 10 mm. Number of dies: 2 Number of stations (incl. cut off): 3 Cutting length: 110 mm. Shaft length under head: 100 mm. Output – pieces/min: 170 Bledpfxepgw Ugo Ahmjn