Used Dividing Head Gears 8 Pieces for sale (53,238)

Condition: used, Year of construction: 2018, Dough dividing and forming machine Lippelt SVI-4DA Year of manufacture: 2018 Dough hopper with pre-portioner, approx. 130 kg dough capacity Head divider, 4-row Weighing piston for small and large weights Weight range, small: 50-80 g Weight range, large: 70-115 g Touchscreen control, Siemens PLC With program memory Spreading belts with adjustable spreading width Flour dusting for spreading belts Nedpfxjz A Srxs Agrjdb With oiling system for rose buns

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears Nedot Hw D Ropfx Agrodb This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor -8x recordings: SK50 -5x Diameter: Ø 22 x 500 mm -2x Diameter: Ø 27 x 500 mm -1x Diameter: Ø 32 x 500 mm Nedoc Ih Tqjpfx Agrsdb -Price/Sale: complete -Weight: 78.6 kg

Condition: reconditioned (used), functionality: fully functional, The used MIND DART DL4 rapid-feed milling machine is particularly suitable for tooling work, thanks to its tilting head and the ability to use a quill (including with automatic feed) with automatic lubrication of the guides. Equipped with independent automatic feeds, it also includes a dividing head with tailstock and related gears, dividing set, and some tools. The machine has been refurbished to meet standards and is in perfect working order. Nodpfsznvmyjx Agrodb

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm max. module 8 Ndedpfx Ast Hwxzsgrob min. module total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, Year of construction: 2015, Dough divider WP Kemper Imperator CT Year of manufacture: 2015 Nodpfx Agjz A Sngjrsdb Condition: Bakery condition Output: 800-1700 pieces per hour Weight range: 200-600g / 600-2350g Dough hopper capacity: 200 kg

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) Ndjdpjy Encwjfx Agrob - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: used, Dough divider and rounder König Industrie Rex I 6 Condition: cleaned and inspected Includes dough hopper with lubrication, laterally adjustable with ladder Ndedpfsz A Sfrex Agrob Weight range: 30–100 g Max. hourly output: 18,000 pieces Siemens touch control with program memory Includes 1 chamber drum Includes 1 set for 4-row production, 1 set for 6-row production

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Nedpfxot Hw R Dj Agrsdb Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), functionality: fully functional, Weiler center lathe, model Condor 81, with a leading and following center, and a 3-axis digital display from K&C, NEW. Technical specifications: >> Year of manufacture 1982, machine number 82 017 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5, with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approximately 1100 kg >> Spindle brake can be engaged >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: Switching between mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching the counting direction >> 1 three-jaw chuck, 160 mm, 1 set of jaws >> Mulifix size B with 1 steel holder >> Change gears >> Electronic spindle protection >> Back wall >> Coolant system >> Machine feet At an extra cost: New collet chuck and new collets from 3 to 26 mm, in 1 mm increments. Nedsz D Hx Nspfx Agrjdb About the machine: A used Weiler Condor 81 in very good condition is offered. It comes from a training center and has been well maintained. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital display from K&C makes working even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Ndsdpfx Aeza Ukiegrsb

Condition: used, Year of construction: 2026, Dough divider Altuntas AD-2400 Standard version: 50 kg hopper with safety cover Weight ranges: 100-600 g or 300-1700 g Weight adjustment via hand crank Metering piston made of food-safe plastic Hourly output: 2,400 pieces (for lower hourly output, an optional frequency converter must be ordered) Belt scraper at the discharge/end of the belt, runs in conjunction with the belt Felt belt with drag net Multi-directional swivel casters with locking mechanism Lubrication of the metering piston at the front and rear of the discharge --> Suitable for working with soft dough and prevents sticking at the dough discharge / This extends the service life of the machine Side doors with quick-release fastener Optional equipment: Large dough hopper (up to 250 kg depending on requirements) Hopper guard in cable design or retractable cover Automatic hopper lubrication Ndedpfjz A Snmsx Agrsb Frequency converter (for adjustable belt speed) Motorized weight adjustment Touchscreen control Pneumatic dough scraper (for very soft/sticky or small dough pieces) Double-piece function Special requests upon request We will gladly advise you on configuring your new dough divider!

Condition: used, Year of construction: 2010, Dough Divider and Molder Fortuna Primus K6 Year of manufacture: 2010 Condition: cleaned & inspected Operating hours: approx. 24,500 Output per row: max. 1,200 pieces Maximum total output: 7,200 pieces/hour Weight range: 35-80g Piece weight, molding speed, and molding chamber height can be adjusted manually Nsdez A Srlspfx Agrodb Pressure roller on spreader belts Flour dispenser at the dough discharge Includes piston set for 4 and 6-row production The Fortuna Primus is a proven dough divider and molder for the best artisanal quality. It is the dough expert for difficult and long-proofed doughs – from soft Berliner dough to firm pretzel dough. Even cool or doughs that tend to stick are processed gently and precisely by the Fortuna Primus. Convenient dough input via a hopper with a capacity of 20-25 kg Small amounts of dough are automatically fed to the dividing system via star wheels Thanks to the dough-friendly dividing system, the fermentation cells remain optimally preserved Best conditions for artisanal baked goods of top quality Dough pieces detach easily from the drum, even with extremely soft doughs, without prior addition of flour Easy access to all machine parts for simple cleaning and maintenance

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Nagel Foldnak 8+ Nagel Trimmer Ndodpfx Aezwxk Hegreb Brochure capacity up to 100 pages (80 g/m² paper) Paper formats DIN A5, A4, A3, A3+, SRA3 (and any intermediate format) Brochure formats DIN A4, A5, A6 (and any intermediate format) Cover stock up to approximately 300 g/m² 2 stitching heads, 2 with magazine control No adjustment required for paper thickness Stitching head positions in mm: 30 x 50 x 80 x 50 x 30 Staple clincher (movable clinchers) Staple types: Ring staples Ri 26/6 Staples: 26/6, 26/8, 26/8S Production output up to 2,000 brochures/hour Sheet stacker, electric, adjustable lift Block stitching, on-line, up to 40 sheets Front trimmer The compression station before trimming ensures flat-lying brochures with a sharp fold; overhead conveyor belts ensure secure paper transport, even for thick booklets; adjustable belt feed ensures accurate alignment against the stop, even with booklets that are fed in at an angle; format change in 30 seconds. Brochure capacity up to 100 pages (80 g/m² paper) Brochure formats A4, A5, A6 (and any intermediate format), min 10 cm Production output up to 2,000 brochures/hour Connection: 230 V, 50 Hz, 600 W

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Ndodpozw N U Nofx Agrjb Maximum board size: 1000 x 900 mm Weight: 170 kg Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Ndedpfot Hwzpex Agrob * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 90° right 610-550 with 2x straight piece RA1282 The Gebhardt roller curve is from 2007 and in a very good (used) condition. It has an engine of the brand SEW. Supports are included in the scope of delivery. Technical data: Manufacturer: Gebhardt Type: 314.01 Position: 014.15 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Length straight frame: 1 x 300 mm + 1 x 150 mm Ndedpek Aa Rysfx Agrob Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.37 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 110kg Scope of delivery: with supports 670 mm total high Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Year of construction: 1995, functionality: fully functional, The perfect retrofit machine! Mechanically in phenomenal condition! This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please refer to the attached KLINGELNBERG inspection reports available for download. Gleason P 800 Year of manufacture: 1995 Control: SIEMENS 840 C (discontinued) Condition: Mechanically in excellent condition Functionality: Fully operational Inspection: Available under power Technical Data: Nominal workpiece diameter: 800 mm Max. workpiece diameter: 800 mm Max. workpiece diameter, special version: 1,200 mm Nominal module: 20 / 30 mm Nominal module, special version: 25 / 35 mm Drive power: 35 kW Drive power, special version: 52 kW Cutter head speed range: 20 - 200 rpm Cutter head speed range, special version: 26 - 265 rpm Additional cutter head speed range, special version: 36 - 360 rpm Cutter head swivel range: +30 / -45 degrees Cutter head dimensions (standard cutter head), diameter/length: 350 / 375 mm Min./max. center distance workpiece/tool: 50 / 600 mm Center distance workpiece/tool, special version: 50 / 800 mm Max. axial slide travel: 700 mm Max. axial slide travel, special version: 1,000 mm Max. axial slide travel, special version: 1,300 mm Lowest cutter head position above table: 450 mm Table diameter: 800 mm Table bore diameter: 245 mm Table bore depth: 875 mm Max. table speed: 15 rpm Max. table load: 10,000 kg Machine dimensions: Width A: 5,800 mm Length B: 6,900 mm Height C: 4,700 mm Nedpfsy Hfm Nox Agredb Machine weight: 22,000 kg Regarding the current KLINGELNBERG gear inspection data BEFORE grinding: "Pitch and lead are inconspicuous. One measurement shows a borderline or slightly out-of-tolerance fHα deviation in the profile. Please check whether this value is permissible according to the drawing/customer approval or if correction/rework is required. The gears were always forwarded for grinding to the RZ 1000 REISHAUER and processed accordingly. Nevertheless, overhaul of the C-axis is recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available. Estimated cost: 10,000 EUR."

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, distance table to spindle center: 755 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual. Nedpfjz Et N Rjx Agrodb

Condition: refurbished (used), Automatic dough divider and rounder Fortuna Automat A3-30 is a reliable and efficient solution for fast and precise dividing and rounding of dough. This machine processes up to 30 dough pieces per cycle, significantly improving production efficiency and ensuring consistent results. The dough weight range of 32 to 70 g allows flexibility for various bakery products. The machine is equipped with three plates and an automatic head tilting function, making operation easier and increasing productivity. Robust construction and high-quality manufacturing ensure stable operation, long service life and easy maintenance, making this machine ideal for professional use. Technical specifications: Manufacturer: Fortuna Model: Automat A3-30 Njdoy Nbakepfx Agrodb Machine type: Automatic dough divider and rounder Capacity: 30 pieces per cycle Dough weight range: 32 – 70 g Number of plates: 3 Functions: Automatic head tilting Dimensions: 80 x 70 x 145 cm Weight: 650 kg

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 151515, input voltage: 400 V, GERNEP Rollfeed 8-480 labeller. Up to 8,000 bottles/hour. Year of manufacture: 2015. Supported formats: 0.5L, 1L, 1.5L, 2L. The equipment was purchased from the bankruptcy of a Belgian company specializing in production lines. The machine appears to be as new—everything indicates it was set up for production, but it never left the plant that prepared it for operation. Label counters show just 9,000 units. The machine has no damages, the computer switches on and displays all system messages. In the attached photos, the system date is not set, which is why the current messages show a 2009 date. However, the machine was manufactured in 2015. Additionally, included is a full pallet of spare parts and plates for labelling 1L bottles. Ndodpfx Agjx Hph Derob This is truly an excellent offer—the machine is practically new, the price is very attractive and non-negotiable! The video shows an identical machine in operation.

Condition: like new (used), functionality: fully functional, machine/vehicle number: ST 1005-8/2 1/1, Year of construction: 2021, lifting height: 8,000 mm, chain length: 9,000 mm, load capacity: 500 kg, lifting speed: 133 mm/s, fine lifting speed: 33 mm/s, type of input current: three-phase, The overhead crane is in like-new condition and has been used very little. The chain is well-maintained and greased. Manufactured and calculated by Ralf Brinkmann GmbH. Transport within Switzerland and export can be arranged; the buyer bears the costs. Technical data: Load capacity: max. 500 kg Runway type: IPE runway beam Runway length (fixed): 12,000 mm Runway length (movable): approx. 9,595 m of which 4,615 mm (extending from the building) System consisting of: 12.00 m IPE runway beam for attachment to the existing concrete ceiling (2 pieces of 6,000 mm each with connecting elements) - Mounting plate on top - 9.59 m IPE runway beam, for movement on the "ceiling rail". intended for attachment via the following travel units. Additionally, it has two counter-pressure rollers, at the rear. Eyelet for attaching the hand trolley to be able to retract the telescopic rail, at the rear end Ndedpozn H Twsfx Agreb of the telescopic rail. 2x hand travel unit for manual movement of the telescopic rail 4x set of end stops (stoppers) designed as bolted angles 2x C-rail system / cable management system for supplying power to the electric chain hoist / electric travel unit (no ideal control!) 1x hand trolley, for retracting the telescopic rail. 1x STAHL Crane Systems electric chain hoist ST 1005-8/2 1/1 Manufactured according to the rules of the EC Machine Directive, Device Safety Act, and BGV. Lifting mechanism operating mode according to DIN EN 13001-2: HD1 Motor classification (FEM/ISO): M4 Load-bearing component classification (FEM/ISO): M5 Protection type EN 60529: IP55 Designed for operation in an indoor environment, ambient temperature -20 to +40°C Lifting mechanism load capacity 500 kg Lifting height 8.00 m Lifting speed 2.00 / 8.00 m/min Power (nominal) 0.20 / 0.80 kW Design data, see product information / motor data sheet Duty cycle 20 / 40 % Load chain galvanized Travel unit electric travel unit, short overall height Travel speed 5.0 / 20.0 m/min Power 0.07 / 0.32 kW Duty cycle 20 / 40 % Flange width 200 mm Electrical system Contactor control Operating voltage 400 V Control voltage 48 V System frequency 50 Hz Control unit STH incl. 6.80 m control cable Paint finish Hoist - Topcoat polyurethane 80 µm Topcoat lifting mechanism in RAL 7021 color, black gray Topcoat control box and fan cover in color RAL 6018, yellow-green Note: Overload protection and emergency lowering by slip clutch (must not be operated under normal conditions) Equipment - Travel switch on both sides - Lifting end switch for upper hook position - Guide for cable-mounted power supply, 505 mm - Radio remote control with emergency control unit STH (transmitter Quadrix, receiver FSE308 with integrated horn (91 dB) and signal light, charger, replacement battery, belt clip, adhesive symbols) Documentation: - Installation declaration according to Directive 2006/42/EC for machinery - Test book - Load capacity labeling according to UVV standards - Operating manual for cranes Currently, the crane is disassembled and stored in a hall in Switzerland, near the German border.

Condition: good (used), rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm Njdpowc Sgzofx Agrodb -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm -Weight: 69 kg

Condition: used, Year of construction: 1994, Dough divider and rounder WP Multimatic MUC 5 Year of manufacture: 1994 Ndedpfx Agjz A Shmjrob Condition: Dough dividing chamber refurbished, ready for immediate use Type: MUC 5, 5-row model Weight setting via handwheel Weight range: 30 to 90 g Includes 1 chamber drum, selection based on availability Capacity: 600 to 2000 pieces/hour per row (depending on dough type and weight) Individual pistons can be locked for, for example, 4-row operation.

Condition: used, Hohner universal stitching head 52/8 - 6er ring eyelet - for round wire No. 24 - 26 - with various accessories acc. pictures Njdpfx Agjfc Rx Teredb condition as shown in the photo