Used Dsb Pillow Block for sale (3,512)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, spindle motor power: 28 W, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, type of input current: three-phase, feed length X-axis: 60,000 mm, feed length Y-axis: 60,000 mm, feed length Z-axis: 60,000 mm, total height: 3,100 mm, total length: 4,950 mm, total width: 5,000 mm, overall weight: 18,000 kg, spindle diameter: 63 mm, number of slots in tool magazine: 180, Equipment: documentation/manual, 5-axis vertical machining center with pallet changer, Heidenhain MillPlus CNC control, 180-position tool changer (HSK63), chip conveyor, high-pressure coolant system with 80 BAR paper filter through the spindle, Heidenhain electronic probe, BLUMM laser presetter, electronic handwheel. Ledpfx Aez Izhtsmzeru

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. * Lrsdpju Nzwuefx Amzeu

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Lrodpfxjxc Ni Re Amzju

Condition: new, new version Lrsdpfxs Abdvao Amzeu Packaging quantity: 1 Packaging unit: piece

Condition: ready for operation (used), ETEL DSB2 digital servo amplifier controller, DSB2P142-111E-000H, serial number (SN), used, in good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfx Amoi D Utyezoru

Condition: used, mileage: 177,500 km, power: 155 kW (210.74 HP), first registration: 05/2020, fuel type: diesel, overall weight: 7,200 kg, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 4,650 mm, loading space width: 2,360 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 95255A Exterior * 4x2 drive type: rear-wheel drive * 02714 Exterior mirrors electrically adjustable and heated * Long exterior mirrors, suitable for vehicle width of 2350 mm * Tinted windscreen and side windows * 79250 Urea tank (AdBlue): 20 liters * 08640 Fuel tank: 90 liters * Refrigerant compressor 170 cc * 00663 Front mud flaps * 02536 Daytime running lights Interior * 06650 Automatic climate control * 00614 Single passenger seat * 79300 Storage compartment on dashboard with USB port * 72484 Digital tachograph * 77742 A-pillar grab handle * 72619 Steering column (steering wheel) height/length adjustable * 76134 Maintenance indicator Multimedia * 79245 Audio system: digital audio system (DAB) with USB and Bluetooth hands-free system Comfort and Environment * 76128 Automatic transmission - Hi-Matic (8-speed) * Electronic brakeforce distribution * 06356 Speed limiter 90 km/h * 05925 Programmable speed limiter * Audio/telephone controls on steering wheel * 02463 Cruise control Lrsdpszi Ifkjfx Amzsu * 06536 Central locking with remote control * 06925 Particulate filter * 210EVID Low-emission according to Euro 6d standard * 76747 Comfort dashboard Safety * Brake assist * Immobilizer * Traction control (ASR) * Driver-side airbag * 04488 Electronic Stability Program (ESP) * Anti-lock Braking System (ABS) Other * 77863 Front axle load 2.7 t * 02240 Rear suspension: trapezoidal leaf springs * Front suspension: torsion bar * Twin tires on 2nd/rear axle * 08656 Bodybuilder interface * Model: C-Series * Driver assistance system: Hill Start Assist (AAS) * 72806 Driver assistance system: Advanced Emergency Braking System (AEBS) + City Brake * 72805 Driver assistance system: Lane Departure Warning System proactive (LDWS) * 210 A alternator * 210EVID Engine 3.0 liter – 154 kW diesel * 06628 Cab seating: luxury driver's seat * The vehicle bears customer advertising, which can be neutralized upon request. Miscellaneous: This offer is non-binding. Subject to change and prior sale. If a foreign currency is indicated, it is based on the current daily exchange rate. The valid currency is that of the vehicle location. ----.

Condition: used, Year of construction: 2026, Overview This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles - Product: vegetable edible oil, ambient filling temperature - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) Ljdpfx Ajzkkp Iemzeru - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Immediately available. Location: Italy.

Condition: excellent (used), SMW Autoblock hydraulic chuck Ledpfx Aszkqfvomzeru D315mm, including soft jaws Hydraulic unit with trolley and foot pedal In good condition

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Lsdpfx Amexl S Uhjzeru

Condition: used, mileage: 640,000 km, power: 290 kW (394.29 HP), first registration: 07/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,650 mm, loading space volume: 84 m³, loading space length: 8,100 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Through-loading device in the trailer * Frigoblock EK 25 U refrigeration unit * Driving operation with generator + 380 Volt stationary operation * 2,000 kg tail lift * Medium-length cab * Automatic transmission * Constant throttle * Euro 6 * Adaptive cruise control * Lane keeping assist * Navigation system Lrsdjy Trngjpfx Amzeu * Differential lock * Fully air-suspended * Rear view camera * Spoiler * Automatic climate control * Heated seats * Aluminum floor * Loading area inside 8,100 x 2,480 x 2,200 mm * Tires front + rear 385/55 R 22.5, middle 315/70 R 22.5 * Only available as a complete unit with trailer Only available with matching trailer: * Front flap for through-loading into the truck * Drawbar pneumatically extendable * Frigoblock refrigeration unit EK 25 U * Driving operation with generator + 380 Volt stationary operation * 2,000 kg tail lift * Manufacturer: Wüllhorst * Loading area inside 7,350 x 2,480 x 2,200 mm * 18,000 kg * First registration 07/2015 * SAF axles * Disc brakes * Air-suspended The price includes the truck and the trailer as a complete unit. Several units available, model year 2015 - 2018. Special equipment: Front axle load 8.0 t, Airbag driver side, Audio-navigation system Bluetooth comfort, Exhaust to the bottom right, Exterior mirror right with maneuvering position, Battery 220 Ah, Bi-xenon headlights, Brake connection standard and DuoMatic, Compressed air connection in the cab, Compressed air tank aluminum, Compressed air unit high, Compressed air horn, Windshield tinted with band filter, Vehicle without trailer coupling, Generator 150 A, Info display 12.7 cm with additional display, Air compressor 2-cylinder, Engine PTO front with preparation for Frigoblock, Engine brake reinforced, Parameterizable special module, Reversing warning acoustic (warning signal outside), Switch tail lift, Headlight cleaning system (SRA), Fuse box, Seats in the cab: Driver's seat comfort suspension seat, Sun blind side window, Driver's door, Voltage converter 24V / 12V 10 A, Steel rims 11.75x22.5 (on trailing axle), Steel rims 11.75x22.5 (on front axle), 24V socket in the passenger footwell additionally, Preparation CB radio, Preparation cool box / refrigerator, Additional thermal insulation, Auxiliary heater (water) Additional equipment: Emission standard EURO 6, Axle configuration: 6x2, Trailer brake 2 - line, Connections left, Trailer socket 24V / 15-pole, Antos, Exterior mirrors electrically adjustable and heated, Differential lock rear axle, Driver assistance system: Lane keeping assist, Cab: Width 2.30 m, Cab: Tilting cab hydraulic, Cab: M ClassicSpace, Cab: steel-sprung, Standard, Cab floor with engine tunnel 320 mm, Suspension: Air / Air (full air suspension), Power windows, Gearbox 12-speed - Type: G 211-12, Urea tank (AdBlue): 60 liters, Lift roof manually (steel), Rear axle bevel gear 440, Body / structure: Chassis, Comfort locking system, Fuel tank: 290 liters aluminum, Steering pump unregulated, Lifting system trailing axle, Air intake from the front, Engine 10.7 liters - 290 kW R6 Diesel (OM 470), Engine compartment encapsulation, Trailing axle single-tired, Ramp mirrors, Spare wheel, Waste heat recovery, Disc brakes front and rear axle, Seat cover / upholstery: Fabric, Seats in the cab: Passenger functional seat, Splash guard front, Stabilizer front axle, Stabilizer additional, Rear axle / trailing axle, Socket cab 24V, Tachograph / EG control unit, Underride protection front, Underride protection aerodynamic

Condition: new, diameter / mm Cutting (quantity) / 0 weight / kg Standard cylinder Make: FESTO Lrsdpfx Ajy S Drnomzou Type: DSBG-125-935-KE-P-CS Material no.: 2801899 F108 p max: 10 bar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, Complete concrete block production line Manufacturer: Schlosser Control system completely renewed in 2019 Lrsdpfxey Sin Uo Amzju Production of paving stones, grass pavers, etc. Drying unit Palletizing system

Condition: good (used), Year of construction: 2008, Universal machining center Machine type: DMG DMU 60 monoblock Control: Heidenhain iTNC 530 Year: 2008 Available after: sofort / now SPECIFICATIONS Travel X-Axis: 730 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis: 0,001° Amount of controlled axes: 5 Ledpjziy Iqsfx Amzeru Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger Tool capacity: 60 NC rotary table: Ø 600 Table size: 1.000 x 600 mm Max. Table Load: 500 kg Equipment Chip conveyor Internal cooling: bar paper band filter Caliper: Heidenhain TS 649 Roto Clear Tool measurement Chip rinsing pistol Oil mist separator Working mode: 4

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller model: HEIDENHAIN TNC 530, workpiece weight (max.): 4,000 kg, overall weight: 35,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, spindle nose: SK 40 (DIN 69871), number of slots in tool magazine: 60, CNC Machining centre DECKEL MAHO DMU 160 P TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: HEIDENHAIN TNC 530 Number of simultaneous axes: 5 Stroke X axis: 1600 [mm] Stroke Y axis: 1250 [mm] Stroke Z axis: 1000 [mm] Feed rate on X, Y and Z axes: 15000 [mm/min] Traversing feeds X, Y and Z axes: 60000 [mm/min] Table dimensions: Ø1500 x 1250 [mm] Lrsdpfezggmbex Amzsu Max. load on table: 4000 [Kg] Spindle type: SK 40 (DIN 69871) Min. spindle speed: 20 [rpm] Max. spindle speed 12000: [rpm] Tool changer magazin number of stations: 60 Machine weight: 35000 [Kg] INCLUDED EQUIPMENT: 1 × HEIDENHAIN part probe 1 × laser measuring system for tool setting and tool monitoring 3 × HEIDENHAIN linear glas scales on the X, Y and Z axes 1 × through-spindle coolant system 1 × chip conveyor 1 × paper-band filtration unit (paper filter system) More information upon request.

Condition: used, maximum load weight: 21,560 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 09/2013, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,100 mm, loading space volume: 71 m³, total width: 2,600 mm, total height: 3,670 mm, Year of construction: 2013, Equipment: ABS, * Trideck steering Ledpfxezxvghe Amzsru * Mercedes axles * Air suspension * Disc brakes * 2,000 kg Bär tail lift * Frigoblock refrigeration unit * Aluminum floor Price as is.

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 Ljdpfxoyztyao Amzoru table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK Ledpfxeyz Dcfs Amzeru - Swivel-Millinghead - Package for tropical climate

Year of construction: 2021, condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-100-PPVA-N3 1383337 -Stroke travel: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available -Dimensions: 320/95/H95 mm Lredpfx Amexy Imcszeu -Weight: 3.5 kg

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m Lsdpfx Amox A H Rlszsru CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) - Swivel-Millinghead - Spindle refurbished - NEW X, Y, Z guideways - NEW ball screws - NEW X-axis bellows

Condition: like new (used), Hydraulic clamping block for 20mm electrode holders H2780 tool clamp Hirschmann As new, in excellent condition Identical in construction to 3R-321.46 Miniblock Hirschmann H83.20 Lrodpjyk Uluofx Amzou

Condition: used, Year of construction: 2014, Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Ledpfx Amexalibszoru Technical data - Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) - Formats possible: 250 ml – 1,000 ml - Formats included: 330 ml and 500 ml long neck bottles - Bottle cap type: 26 mm crown caps - Execution: - Filler/capper: Modulblock 10/1-C - Labeler: LLAC-R-SQ (VAR STEP) - Additional features: - Hot foil stamper (added later) - CIP dummy bottles - Change parts for 330 ml format

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Lredpovcbtrjfx Amzeu Preferred text communication via e-mail or whatsapp.

Condition: used, weight / kg taper MK / Set of 3 clamping blocks with T-slots Length: 1000mm Ledovcd N Aopfx Amzsru Width: 80mm Height: 160mm T-slot size: 32 x 18 T-slot height: 32mm Clamping plate – clamping block – clamping table – clamping arm – T-slot plate

Condition: new, Schunk KSH 100-Z 2-jaw power clamping block, max. operating pressure 60 bar, unused in opened original packaging, 100% functional, scope of delivery as per photos. Ledpsx Eucwofx Amzeru

Condition: new, Schunk PGS100 stroke 6mm tandem power clamping block 0300670, unused in original packaging, 100% functional, scope of delivery as per photos Lrsdpfsx Eudbex Amzju