Used Dtf Speedline A2 Dtf Printer for sale (4,609)

Condition: used, Linear drive, linear gear, lifting gear, spindle drive, electrohydraulic actuator for valves, valve drive, actuator, servomotor, adjusting cylinder -Voltage: 380 V -Power: 0.25 kW -Stroke: 200 mm, F (daN) 80 -Piston: Ø 75 mm -Take: Ø 16 mm Lhedpfjd Naw Eox Amtsi -Dimensions: 600/130/H140 mm -Weight: 6.2 kg

Condition: used, Small character inkjet printer -Machine: has not been checked and is sold as a spare parts carrier -Dimensions: 500/600/H1750 mm Lodeb A H Ivspfx Amtehi -Weight: 40 kg

Condition: used, Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder Lsdpfx Aefuw Npomtehi -Manufacturer: Jumo, single and multi-color dot pens -Type: PS1d-44/ -Dimensions: 265/145/H145 mm -Weight: 3 kg

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Ljdpozhlr Eofx Amtehi Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: like new (used), Year of construction: 2021, operating hours: 500 h, 1050 including holder for 2 heads Ledpsrz N Imjfx Amtehi The Thermo-Inkjet 1050 was designed as a low-maintenance, easy-to-use industrial printer and produces high-resolution text, logos and graphics as well as 100% error-free readable barcodes.

Condition: good (used), functionality: fully functional, machine/vehicle number: D30423, operating hours: 3,136 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 240 V, input current: 7 A, input frequency: 50 Hz, feed length X-axis: 355 mm, feed length Y-axis: 355 mm, feed length Z-axis: 254 mm, The machine is being sold due to a restructuring of our machine park and is immediately ready for use. The scope of delivery also includes various residual materials, so the printer can be used immediately after commissioning. We will gladly provide further information about the accessories and included materials upon request. Ljdpfxjzh Naye Amtohi

Year of construction: 2023, condition: ready for operation (used), A Flashforge 3D printer including the associated filament drying and storage unit is available. 1) Industrial FFF-3D printer Flashforge Creator 4A with HT extruder, build volume dimensions X/Y/Z: 400mm/350mm/500mm, layer height range: 0.05mm-0.4mm, printing accuracy: +/-0.2mm, max. printing speed: 200mm/s, max. extruder temperature HS/HT: 360°C/320°C, machine dimensions X/Y/Z: approx. 850mm/700mm/1000mm, weight: approx. 100kg, operating hours: approx. 5600h. 2) Mobile Flashforge filament drying and storage station, max. drying temperature: 120°C, drying chamber dimensions X/Y/Z: 500mm/375mm/200mm, machine dimensions X/Y/Z: approx. 840mm/675mm/600mm, weight: approx. 70kg. Including F extruder, HS extruder, 2x HT extruders and a tool set. The mainboard was replaced at approx. 4378 operating hours. Documentation available. An on-site inspection is possible. Lhsdozhw R Hepfx Amtsi

Condition: good (used), German RepRap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical specifications: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition modeling (FDM/FFF) Dimensions: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s XY precision: +/- 0.05 mm Max. volume: 500 × 400 × 450 mm Power: 230 V AC, 50 Hz, 10 A, 2.3 kW Other features: Touchscreen Condition: used Scope of delivery: (See pictures) + Filament spools (PETG) and printing accessories Lhodpozg Tz Esfx Amtoi Only PC (WIN 7) available! Screen and input devices not included! A license for the current software required to operate the printer must be purchased separately by the customer (approx. 200 euros for Simplify3D)! (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture: 2021 Technical data: Build volume: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900 mm x 950 mm x 1950 mm Printing system: Dual extruder equipped with automatic cleaning system Filament diameter: 1.75 mm Lodpfxszg Tzls Amtshi Printing materials: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: Soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic swapping system Print head temperature (max.): 500°C Heated bed temperature (max.): 180°C Build chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in technical data and specifications excepted!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, HP Indigo Press 7800 The machine is in excellent condition, still installed, and currently in operation. It can be inspected under production conditions by appointment. According to the current owner, there are no outstanding technical issues, and the machine is fully up to date. Lhjdpfx Aezacdwjmtsi Machine details: Manufacturer: HP Indigo Model: HP Indigo Press 7800 Serial number: IL 47000146 Year of manufacture: February 2015 Impression counter: approx. 19.7 million impressions, as of June 2025 Number of authorized colors: 7 Number of installed colors: 7 White ink authorized: Yes Machine still in production: Yes Availability: immediately, but not urgent Configuration and features: • 7-color configuration • White ink authorized • Thick substrate kit • One-Shot technology • Inline spectrophotometer • OFIR kit • Spare Ink Tank S3 • Chiller unit • UPS system • HP service contract • HP Production Pro for Indigo IN100T Digital Front End Hardware • HP Indigo Z4 G4 2133 V2 Control PC • HP Software Version 16.2.2 Technical and optical condition: The machine is reported to be in very good condition. According to the seller, there are currently no outstanding technical issues. The machine is fully maintained and up to date. In 2023, the entire material path was renewed/replaced, from the feeder to the stacker. This is a very important value factor, as the material transport section is one of the most relevant areas for stable and reliable production.

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, Equipment: documentation/manual, For sale: Adkins Inline 800 powder shaker/dryer (DTF) We purchased this machine on November 19, 2024. It has operated flawlessly throughout its use and remains in perfect condition. Lhjdpfx Amozklxkotoi Reason for sale: we are reorganizing our equipment due to an expansion. Original purchase price: EUR 8,500 + VAT. Asking price: EUR 3,000 + VAT. Please feel free to contact me at any time if you have any questions. The machine can be viewed in District IX, Budapest, Hungary. More information about the machine is available on the manufacturer's website: old.aadkins.com/.../inline-800-dtf-powder-shaker.../

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, operating hours: 9,500 h, Keyence MK-G Inkjet Printer – black & white – approximately 2 years old Two Keyence MK-G Inkjet Printers in good condition are for sale. Available: 1 black printer 1 white printer Both units are approximately 2 years old, fully functional, and in good, well-maintained condition. The printers were in use until recently and can be made available immediately. Ledpfxozh I Aas Amtohi Ideal for industrial marking, product coding, and packaging printing. Available immediately. Inspection possible by appointment.

Condition: excellent (used), color A4 printers in very good condition Ledpfxezh I Ate Amtohi

Condition: ready for operation (used), Innotech ZGW F25 final assembly workstation, assembly station, workstation, workbench Hermes A4L label printer UV light Magnifier lamp PC, monitor, keyboard You are welcome to visit for an inspection. We are happy to organise affordable shipping for you! Ledpjx Hwcisfx Amtjhi You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided that a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and have a look at our other offers as well. All mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Deviations from technical data as well as errors in the item's description may occur and are reserved.

Condition: used, Year of construction: 2009, functionality: fully functional, FOREL APG 250 A2 (2009) Ljdpfxozi Srns Amtjhi Gas Press Maximum dimensions: 2500 x 4500 mm Minimum dimensions: 190 x 320 mm Maximum manual opening: 69 mm Gas flow rate: 1,500 Nl/min Compressed air: 800 Nl/min, 6 bar Power: 6 kW Thermal switch: 25 A

Condition: good (used), functionality: fully functional, Year of construction: 2014, overall weight: 41 kg, Technical Specifications: Build Volume: 30.5 L x 30.5 W x 45.7 H cm [12.0 L x 12.0 W x 18.0 H in] Layer Resolution: 100 microns [0.0039 in] Filament Diameter: 1.75 mm [0.069 in] Print Chamber: Enclosed and heated build chamber Lodpfx Aoqy E N Ssmtohi Connectivity: USB, Ethernet, Wi-Fi Condition Details: Usage Details: Used for small parts and prototypes. Printer's extruded filament readings may show inaccuracies. Overall Condition: Expected wear from use, few scratches, and dust due to infrequent use. Well-maintained. Included in the Kit: MakerBot Replicator Z18 3D Printer On-board Camera for Print Monitoring Swappable MakerBot Smart Extruder+ MakerBot Large PLA Filament (Various Sizes) Intuitive Display, Dial, Assisted Leveling Condition Note: Company-used printer, always stored in optimal conditions.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 268 h, input voltage: 240 V, input current: 12 A, input frequency: 60 Hz, power: 0.6 kW (0.82 HP), We offer this used Zaxe Z3 3D printer, manufactured in 2024. Product name: Zaxe Z3 3D Printer Input voltage: 100 - 120 V and 200 - 240 V Input current: 12 A and 7.5 A Frequency: 50 - 60 Hz Power: 600 W Printing time: 268 hours Lhsdpfx Amszhtilstei If you have any questions or require further information, please send a message or contact us by phone.

Condition: used, Stratasys Objet Objet30 Prime V3 + Cleaning Glovebox Technical specifications: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Model materials: Transparent, rigid (VeroClear) Rigid, opaque, white (VeroWhitePlus) Rigid, opaque, blue (VeroBlue) Rigid, opaque, black (VeroBlack) Rigid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: used Scope of delivery: (See pictures) (Subject to changes and errors in the technical data and information!) Ljdpfx Aozgcqcomtohi We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: used, maximum load weight: 27,100 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2001, next inspection (TÜV): 11/2026, loading space volume: 60 m³, Equipment: ABS, Spitzer SK 2760 CAL | 60 m³ Silo Semi-Trailer | BPW | Speedline VIN: 6S11457 CHASSIS / COMPONENTS * 3 x BPW EcoPlus axles * Air suspension * Disc brakes * WABCO Trailer EBS 4S/2M+1 * NATO connector * Raise/lower valve * JOST / haacon support jacks * 3 x storage boxes * Fire extinguisher box * Speedline aluminum rims BODY * Spitzer silo for dust and granular goods * Type: SK 2760 CAL * Volume: 60 m³ * Operating pressure: 2.00 bar * Test pressure: 3.00 bar * Next external inspection: 03/2027 * Next internal inspection: TIRES * Axle 1: 385/65 R22.5, remaining tread approx. 30% / 30% * Axle 2: 385/65 R22.5, remaining tread approx. 60% / 50% * Axle 3: 385/65 R22.5, remaining tread approx. 10% / 10% WEIGHTS * Permissible total weight: 34,000 kg * Tare weight: 6,900 kg * Payload: 27,100 kg OTHER * German vehicle * MOT: 11/2026 * Inspection report: Lsdpezhdbrefx Amtjhi New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing & spelling errors, changes, prior sale and errors reserved! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for our customers. A particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly assist you with loading your purchased vehicles. Organization of special transport We will gladly assist you with organizing special transport. Day passes / export license plates We will gladly assist you in obtaining export license plates/short-term license plates. Handling customs formalities We will gladly assist you with handling customs matters.

Condition: like new (used), functionality: fully functional, machine/vehicle number: 08812-00-6627, Year of construction: 2021, total length: 1,300 mm, total height: 1,920 mm, total width: 1,740 mm, type of input current: AC, overall weight: 550 kg, input voltage: 230 V, input current: 32 A, shaft length: 1 mm, path measurement accuracy: 1 mm, temperature: 420 °C, input frequency: 60 Hz, sheet thickness aluminum (max.): 1 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, positioning accuracy: 0.011 mm, wall thickness: 1 mm, electrical fuse: 32 A, table width: 1,000 mm, table length: 1,000 mm, repeat accuracy: 0.011 mm, workpiece weight (max.): 50 kg, feed length X-axis: 1,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,000 mm, power: 4 kW (5.44 HP), travel speed (max.): 12,000 mm/min, space requirement length: 1,300 mm, space requirement height: 1,920 mm, noise level: 55 dB, operating temperature: 60 °C, space requirement width: 1,740 mm, Equipment: CE marking, We are offering our CreatBot F1000 industrial FDM 3D printer, which was meticulously utilized for prototyping large-scale engineering parts. This machine has spent its operational life in near-laboratory conditions - housed in a dedicated, dust-free cleanroom with internal air ventilation. It is in fully operational, working condition and has been heavily upgraded for enhanced print stability, superior surface finishes, and maximum reliability. This unit features hardware and software optimizations that make it perform significantly better than a stock factory model: - Upgraded Print Head ($500 Value): Swapped with the newer, more advanced print head from the CreatBot D1000 model for superior extrusion control. - Upgraded Software: Flashed with the updated CreatBot D1000 software suite for smoother operation and better motion profiling. - Premium PEI Build Plates ($550+ Value): Includes two (2) custom 1000x1000 mm steel sheets finished with a single-sided golden textured PEI powder coating (replaces the original metal squares). These provide an ultra-smooth first layer and incredible print adhesion. - Advanced Thermoregulation: Custom canvas insulation panels added to the doors. This ensures an even internal chamber temperature, reduces warping on large prints, and significantly lowers power consumption. - Low-Friction Filament Rollers: Custom-engineered rollers dramatically reduce filament drag and physical strain, virtually eliminating the risk of filament breakage mid-print. Lsdpfx Ajzhr Rhomtehi - Fully Rebuilt Filament Drying Compartment: Completely re-engineered for flawless material storage. Features a separate digital controller, high-precision temperature sensor, the original heating element/fan, and an additional external fan for perfectly even heat distribution. You can easily set and maintain any achievable drying temperature. - Precision Z-Offset Tool: Comes with a specialized micrometer calibration tool to check and perfectly dial in the Z-axis nozzle distance before launching massive print jobs. - Materials Printed: Primarily used to print PETG, with a small amount of ABS and PLA. - Recent Major Maintenance: This machine has been frequently serviced. All X, Y, and Z axis tension belts were replaced very recently and have minimal operating hours on them. - Testing: The printer is fully operational and can be tested upon request prior to collection. What’s Included in the Sale: The upgraded CreatBot F1000 3D printer unit - 2x Custom 1000x1000mm Golden Textured PEI Build Sheets - Special Z-offset micrometer calibration tool - Massive Spare Parts Package: All original OEM items that were upgraded are included in the sale, alongside a large stash of extra printing heads, various nozzle sizes, spare filament, and more. Delivery Terms: EXW (Ex Works) Logistical arrangements and shipping costs are entirely the responsibility of the buyer. However, we will happily pack and secure the printer safely for freight transit on our end to ensure it leaves our facility in perfect condition.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer Ljdpfx Ajyvhwiemtohi - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: used, Year of construction: 2020, machine/vehicle number: 3771695093, Xerox Primelink C9070 This is a Xerox Primelink C9070 production copier in very good condition. Counter: 274K (166K B&W / 107K color) Lsdewhprfjpfx Amtjhi Technical specifications: Power supply: 220-240 V, 50-60 Hz CM SOLUTIONS is now one of the leading French and European companies in the purchase, sale, and refurbishment of used office equipment. By integrating transparency, expertise, and ethics into every level of our business, we offer our customers high-performance products at competitive prices. Why do our customers choose CM Solutions? - 30 years of international experience in over 50 countries - 20 brands of machines: Ricoh, Kyocera, Xerox, Toshiba, Canon, Konica Minolta… - A large stock of 2000 copiers available immediately - A team of qualified technicians Do not hesitate to contact us for more information.

Condition: excellent (used), Xerox / Fiery EX-P 6 controller for the Xerox Iridesse. Lsdoxyv Nxjpfx Amtohi Tested and in good working condition. All the equipment mentioned is not for sale/resale in Russia or any country subject to an EU embargo.

Condition: new, The new Xerox AltaLink C8235 is a color multifunction printer. Ljdpfsykbctsx Amtohi All the equipment mentioned is not for sale/resale in Russia, or any country that is under an EU embargo. New!! New!!

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, working width: 4,800 mm, Descriptive Document of the Machinery “Bendazzoli NBB186/48 CE” Serial No.: 582 Corrugated Cardboard Packaging Production Machine 1. General Description: - Machine name: Printer Slotter - Model: NBB186-48 - Manufacturer: Bendazzoli Costruzioni Meccaniche - Year of Manufacture: 2001 - Year of Mechanical Overhaul: 2025 ° Slotter overhauled to as-new condition ° Partial printing unit overhaul (new anilox cylinder and rubber roller, new compensator, new bearings, new lubrication pump, overhauled ink feed pump) ° Partial feeder overhaul (new feeder wheels, new lubrication pump, main motor completely overhauled by CEAR, new CAM bearing) ° Static unit overhauled to as-new condition Complete sandblasting and repainting of all machine assemblies. - Year of Partial Electrical Overhaul: 2025 Includes replacement of: sensors / push button panels / onboard cabling / solenoid valves / electrical junction boxes for machine groups. 2. Technical Specifications: - Dimensions: Length 4800mm; Cylinder Circumference 1860mm - Speed: Maximum rotation 5,500 cycles/hour under optimal conditions - Minimum shaft center distance: 450mm - Sound pressure level (feeding area): 85dB (A) - Sound pressure level (delivery area): 82dB (A) - Electrical characteristics: Supply 400Vac Three-phase 3P+PE Nominal Power: 70KW Power Consumption: 57KW Nominal Current: 102A Operating Current: 82A - Production speed: approximately 5,000 boxes/hour in sync mode, approximately 2,500 boxes/hour in extended mode 3. Main Components: - Cronofit Feeder Table Group with automatic positioning of side guides and bundle support gate. - Printing Unit Group with automatic print presetting - Slotter Unit Group with extending and automatic presetting (knife heads) and carton height adjustment - Static Unit Group 4. Safety: - The machine is fitted with protective guards on all moving parts, equipped with sensors to detect guard opening. - Each machine group is provided with an emergency stop mushroom button and a rope pull switch to instantly halt group movements. 5. Electrical Equipment: - Main electrical cabinet housing all control and power distribution components - Operator control desk/console complete with touch screen panel Lhodpfsyifdvsx Amtsi 6. Components not included, for possible installation: - Cable tray and optional accessories - Command and power cables between cabinet/console/machine assemblies - Network bus cables -Price Negotiable Note: Possibility to purchase a Die-Cutter and Stacker (year 2008, requires overhaul)