Used Dunkes Hdsr 75 for sale (6,752)

Condition: used, Year of construction: 2017, functionality: fully functional, power: 250 kW (339.91 HP), Electric drive: 250 kW Including control cabinet Fsdpfjyuvr Rex Accjgc

Condition: excellent (used), Year of construction: 2020, operating hours: 1,743 h, functionality: fully functional, power: 257 kW (349.42 HP), Mobile shredder LINDNER URRACO 75. Foldable discharge conveyor, overband magnet, radio remote control. Fgsdpfx Acoydmgdecoc Service new in February 2026.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Fgedevf E Avjpfx Accjc Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2024, front tire size: 0%, rear tire size: 0%, We are selling a used Reform Metrac H 75 from year 2024 with approximately 830 operating hours and around 4,000 kilometers. Price does not include front mulcher, which can be purchased separately. Further details available upon request by email or phone. Storage location: 93095 Hagelstadt. Fedpfx Acsyq Axpocegc

Condition: used, mileage: 179,837 km, power: 118 kW (160.44 HP), first registration: 10/2012, fuel type: diesel, empty load weight: 4,940 kg, maximum load weight: 2,550 kg, overall weight: 7,490 kg, wheelbase: 3,690 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,450 mm, Year of construction: 2012, construction height: 3,310 mm, Equipment: ABS, onboard computer, tail-lift, The Iveco EuroCargo ML 75 E 16 P is a reliable used box truck, ideal for transporting goods. This vehicle, first registered in October 2012, has a mileage of 179,837 km and is equipped with an efficient Euro 5 diesel engine that delivers 160 hp with a displacement of 3,920 ccm. The emission class complies with the Euro 5 standard, and thanks to the green environmental badge, driving in environmental zones is no problem. Fgjdpezbyvmofx Accjc The truck features an automatic transmission, which increases driving comfort, as well as air suspension, which ensures a stable ride. With a height of 3,310 mm, a width of 2,300 mm, and a length of 7,450 mm, the cargo area offers sufficient space for various types of transport. The tailgate significantly facilitates the loading and unloading of goods. The registration as a used vehicle allows for a maximum total weight of 7,490 kg. Externally, the truck is presented in a striking yellow metallic paint. The vehicle has two doors and offers space for two seats. The previous owner carefully maintained the commercial vehicle, and the main inspection is valid until November 2024. This model is particularly interesting for commercial customers looking for a reliable and versatile transport solution. Sale is only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 135 h, power: 55 kW (74.78 HP), motor manufacturer: Perkins, fuel type: diesel, first registration: 12/2022, color: red, overall weight: 3,350 kg, total height: 2,450 mm, total length: 3,500 mm, total width: 1,980 mm, machine/vehicle number: VBLA4T40020750413, Equipment: air conditioning, cabin, front power take-off, hydraulics, power shift gear, Compact, maneuverable – yet powerful and extensively equipped: Lindner Lintrac 75 LS – Financing options available. Engine: PERKINS Syncro 55 kW, 75 hp, 350 Nm 4 cylinders, 3600 cm³ Turbo-diesel engine Emission stage 5 Fsdpozb N Hnefx Accogc Transmission: 15/16-speed ZF Steyr Power2 power shift transmission, 40 km/h Power take-off: load-sensing rear power take-off, 430/540/750/1000 rpm; front hydraulics with power take-off Top link with quick coupler, additional lift cylinder Hydraulics: Bosch Rexroth high-performance pump, separate oil circuit Design fenders instead of rubber fenders, DAB+ radio, USB, Bluetooth Subject to prior sale – all information is non-binding. The accuracy and completeness of the information provided here are not guaranteed. Any warranty and/or liability is excluded. Deviations from the description above cannot be ruled out. We would like to point out that the subject of the purchase agreement will be exclusively the motor vehicle in its actual condition.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 07/2027, year of last overhaul: 2026, total length: 1,175 mm, total width: 800 mm, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, electrical fuse: 32 A, Kemper SPL 75 spiral mixer Proven technology ... already successfully used in many applications! Manual control Flour dust hood Stainless steel bowl and spiral Very robust design The dough machine is mobile Only available from us with DGUV V3 certification Fgsdpfx Aceyak Tgscec Connection: 400V, 32A-CEE plug Used machine, refurbished & SAB tested With warranty + spare parts service Come and visit us!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, total width: 650 mm, total length: 730 mm, total height: 1,560 mm, empty load weight: 350 kg, input frequency: 50 Hz, overall weight: 350 kg, electrical fuse: 16 A, power: 4 kW (5.44 HP), TOP Planetary Mixer Fomko PL 75 LH Fsdpfx Ajyakiboccogc 2 power levels with stepless adjustment robust technology mixer 1 stainless steel bowl, 75 liters 1 whisk, 1 flat beater, 1 kneading arm DGUV V3 certified – available only from us Connection: 400V, 16A-CEE plug Dimensions: 730 x 650 x 1560 mm (W x D x H) Used machine Visit our large showroom!

Condition: excellent (used), Year of construction: 2011, S016230 Fgedpfxozcnu Te Accoc PROD. ATLASCOPCO TYPE GA75VSD S/N API658180 YEAR 2011 POWER (kW) 75 CAPACITY (m3/min) 14.68 PRESSURE (bar) 13 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER yes COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: reconditioned (used), Totally renovated Cambio 75 debarker with 5 knives airten rotor and brand new hydraulic dampers Fedponcfrzefx Accsgc

Condition: used, Technical data for the connection plate: Manufacturer: META Type: META CLIP Fjdpfxorntl Ue Accsgc The scope of delivery includes: 01x connection plate, used Design: single Material color: sendzimir galvanized Total height: approx. 75 mm Total width: approx. 55 mm Material thickness: approx. 1.5 mm Weight per unit approx. 0.060 kg Currently available in stock: approx. 300 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, Technical Data for the Base Plate: Racking System: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x Base plate, new Fgjdpfsx Eldlex Accjc Model designation: FT 911 Suitable for frame profile width: 75 mm Material color: RAL 5010 Gentian Blue Material thickness: approx. 6.00 mm Total width: 165 mm Total depth: 80 mm Number of bolt holes: 2 pcs Hole diameter: 13 mm Weight: approx. 0.64 kg | per piece Including the following fastening material: 02x Hexagon bolts M10 x 30 mm 02x Nuts M10 04x Washers M10 Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any additional transport or shipping of this item incurs extra costs, which can be individually requested from us depending on the delivery location and scope of delivery.

Condition: good (used), Year of construction: 2024, Refrigerant dryer, OMEGA AIR, RDP 75 – used: Price ex works: €750.00 (net)! Manufacturer: OMEGA AIR Type: RDP 75 Fgedpfxozbydwe Accec Year of manufacture: 2024 Nominal flow rate: 75 m³/h Max. operating pressure: 16 bar Ambient temperature during operation: 1 °C to 45 °C Max. air inlet temperature: 55 °C Ph~V-Hz: 1~230-50/230-60 | 0.40 kW Protection class: IP20 Contains fluorinated greenhouse gases Refrigerant: R513a | 0.39 kg | CO₂ equivalent 0.22 t Operating hours: unknown Condition: good Available: from approximately August 2026

Condition: excellent (used), WEG 75 kW engine in good working order, bearings replaced Fjdpfjwiwfijx Accsgc in perfect condition

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Knetspirale kneading tool Spiral for Kemper Spiral Fgodpfx Acocdh Hfecec Model: SP 75 stainless steel More Knetspiralen upon request!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 5100 € 98.43 € 1050 mm 2 mm 75 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor Fgjdpfx Acey Dvlkocsc lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls

Condition: used, Year of construction: 2021, gebraucht 2021 9502 Türkei 2200 € 1 1050 mm 2 mm 75 mm 1930 mm 700 mm 1160 mm 300 kg MINT CONDITION 3 rolls Fsdpswiquqefx Accsgc asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning, including intensive and large-scale projects. The main advantage of this unit is its minimal reliance on new-generation electronics. It is one of the most powerful machines available on the market and is in excellent condition. Fgedpfxowg R Edj Accsc Cold Jet Aero 75 DX Dry Ice Blasting Machine, Complete with the Following Equipment: - COLD JET AERO 75 DX DRY ICE (only 12 operating hours) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) One of the best machines worldwide. No electronics inside, making it highly reliable and affordable to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold include a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. New Cold Jet machines are also available through us. Contact us for more details. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, mileage: 170,943 km, power: 140 kW (190.35 HP), first registration: 10/2021, fuel type: diesel, empty load weight: 5,040 kg, maximum load weight: 2,450 kg, overall weight: 7,490 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, loading space volume: 37 m³, loading space length: 6,175 mm, loading space width: 2,482 mm, loading space height: 2,427 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, Iveco ML 75-190 E6 Sliding Tarp - Sliding tarp - Side boards - Dimensions (LxWxH, interior) 6.17 x 2.48 x 2.42 m - Automatic transmission Fedpfxszafdgs Accjgc - Engine brake - Air conditioning - Adaptive cruise control - Lane keeping assist - Payload: 2,450 kg - EURO 6 - Leaf/air suspension - Tail lift - Tires: 205/75R17.5 Very good condition! German vehicle! Export price. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will generally find the export price in our listings, as this is independent of the intended place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information should be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typographical errors, and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Year of construction: 2024, operating hours: 390 h, condition: used, Power: 54 kW (74 HP) Lifting capacity: 2.500 kg Rental currency: EUR Fedpfewmv Idex Accsgc Please contact KEY-TEC Sales for more information

Condition: new, power: 55 kW (74.78 HP), mast type: telescopic, Year of construction: 2023, Empty weight: 5.485 kg Fjdpfxox Evk Ao Accegc Chassis type: articulated Make of engine: Deutz Lifting capacity: 1.600 kg Top speed: 30 km/h Rental currency: EUR Please contact KEY-TEC Sales for more information = Additional options and accessories = - Quick coupler

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 07/2027, year of last overhaul: 2026, total length: 1,200 mm, total width: 800 mm, total height: 1,340 mm, input frequency: 50 Hz, empty load weight: 540 kg, overall weight: 540 kg, type of input current: three-phase, electrical fuse: 32 A, Kemper SPL 75 spiral mixer Proven technology ... already tested many times! Manual control 2 speeds, 2 timers Stainless steel bowl and spiral Robust design Only available from us with DGUV V3 certification Connection: 400V, 32A CEE plug Used machine, refurbished & SAB tested With warranty + spare parts service Options: Delivery service Maintenance contract Service package Spare parts box for added safety! Instruction and commissioning Visit our large showroom! Fgsdpfsx Rat Ssx Accec

Condition: good (used), Year of construction: 2008, load capacity: 1,800 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, empty load weight: 3,500 kg, Electric forklift, brand Nichu, manufactured in 2008. Capacity: 1,800 kg. Lifting height: 4,700 mm. Mast height (collapsed): xxx mm. Equipped with FREELIFT and SIDE SHIFT. Battery included, with charger. Watch the video on YouTube. Fgjdpjy Uryxefx Accec

Year of construction: 2023, condition: excellent (used), functionality: fully functional, Professional electric heater Trotec TDS 75 R with 15 kW heating power – a proven heating device for construction sites and industrial halls. Robust design with transport wheels and control panel. Suitable for construction site drying, heating of industrial halls, workshops, warehouses, events, and emergency heating. IMPORTANT: 3 IDENTICAL UNITS AVAILABLE. Price 850 EUR per unit net, discount negotiable if all 3 units are purchased. All three units were manufactured in 2023 and have been used only sparingly (workshop/industrial hall operation). Connection via red CEE plug (400 V / 32 A). Technical data: - Model: TDS 75 R, Art.-No. 1.410.000.009 (V2) - Heating power: max. 15 kW - Airflow: 1,100 m³/h - Operating range: -20 °C to +45 °C - Current consumption: 21.7 A - Sound level: 57 dB(A) - Connection: 3 PE 400V 50Hz, red CEE - Weight: 19 kg/unit - Protection class: IP24 - Year of manufacture: 2023 - Serial number (example): 2023/10/00333 - Manufacturer: Trotec GmbH, D-52525 Heinsberg Fgodpfx Aezabt Roccsc Collection / Transport: Self-collection or shipping via a freight forwarder. Individual sale possible. Shipping as a package is feasible thanks to the compact design.

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding device, welding rotator, welding rotator and tilting table, welding rotator -Table: is tiltable -Maximum load: 75 kg -Clamping diameter: 300 mm -Hollow shaft: Ø 42.5 mm Fgedpsdwpdusfx Accsc -Drive: 0.1 kW -Speed: RPM -Quantity: 1x welding rotator available Price: per piece -Dimensions: 830/450/H920 mm -Weight: 174 kg