Used Durma Plate Shear for sale (13,667)

Year of construction: 1966, condition: used, machine/vehicle number: 4661, working width: 5050 mm metal sheet thickness: 10 mm power: 30 kW space needed: 2450 x 5600 x 2500 mm weight: 28000 kg Lsdpfxjb N Ercj Ammjac

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm rear stop: 1000 mm power: 15 kW space needed: 4100 x 2300 x 2100 mm Lodob N Erbopfx Ammoac weight: 8500 kg

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm rear stop: 520 mm Lajdpfx Asb H Ibusmmec power: 380 V, 6,3 kW space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Year of construction: 1963, condition: used, machine/vehicle number: 63731, working width: 1040 mm metal sheet thickness: 12 mm rear stop: von Hand bis 500 mm Lodpfeb N Ektjx Ammeac power: 380 V, 11 kW space needed: 2500 x 2150 x 1900 mm weight: 4100 kg

Condition: excellent (used), Year of construction: 1985, max. working width: 3050 mm for sheet metal (at 45 kg tensile strength) up to: 6 mm clear gap between uprights: 3400 mm cutting angle adjustable by hand: 0.5 - 3° number of hydraulic hold-downs: 18 stroke rate approx.: 9 - 17 /min gauge adjustment: 1000 mm hydraulic drive: 380 V, 7.5 kW required space incl. back gauge: 3600 x 1800 x 1580 mm Laodjxrp Thspfx Ammsc weight: 5200 kg

Condition: good (used), Year of construction: 2007, sheet width 1350 mm plate thickness 4.0 mm Lajdpfx Ajyuzcuemmjc thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, Year of construction: 1995, sheet width 6000 mm plate thickness 6 mm distance between columns 610 mm Control Elgo 87 P2 total power requirement 15 kW weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Lodpfxeyutt Ee Ammjac than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 25000 € 480 € Lodpfjwp S Swsx Ammeac 2050 mm 6 mm 30 1/min 2.3 ° 750 mm 7.5 kW 800 mm 530 mm 2355 mm 2720 mm 1630 mm 1230 mm 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection

Condition: new, Year of construction: 2026, controller manufacturer: CYBELEC CybTouch, sheet thickness aluminum (max.): 8 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 600 mm, power: 10 kW (13.60 HP), 2 in 1 = shear + press brake in one machine with control CYBELEC CybTouch 15'' shear capacity 3200 mm x 6 mm, throat 200 mm; press brake capacity 3040 mm, capacity 100 to; working hight 640 / 1240 mm, control CYBELEC CybTouch 15'', mot. back gauge 700 mm, shadow line, motor 7,5 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs same machine with capacity L = 2200 mm or L = 1400 mm Lsdpfxsd Huukj Ammjac

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Ljdov Tk Exepfx Ammsac Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Tank capacity: 150 l

Condition: good (used), Year of construction: 1975, working width: 3,700 mm, cutting angle (min.): 2 °, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 12 mm, back gauge: 1,000 mm, oil tank capacity: 500 l, overall weight: 18,400 kg, total length: 4,500 mm, Equipment: documentation/manual, finger protection, For sale: 1 used hydraulic guillotine shear Manufacturer: Darley Model: GS3660x16 Year of manufacture: 1975 Technical Data: Ljdpfx Aexfkr Ssmmjac Distance between uprights: 3860 mm Cutting angle: 2° Hold-downs: 18 pcs. Oil capacity: approx. 500 l Total power requirement: 22 kW Weight: 18,400 kg Back gauge: 1,000 mm Equipment: - electric back gauge - cutting line illumination - front finger guard - ball rollers on the support table - side gauge - support arms - movable foot switch - operating manual

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm Lodspxmxcjpfx Ammjac - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Lajdpfxshhc Ixo Ammjc Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.809, Offer 25079 Technical specifications: - Max. working width 3100 mm - Max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1° 30' - Cutting gap adjustment via hand lever Lsdpfx Asv Nkdmjmmjac - Number of hydraulic hold-down clamps: 14 - Motorized backgauge - Electric foot switch - Front angle stop - Stroke rate 15 per minute - Drive 380 V / 22 kW - Table height 800 mm - Space required including backgauge, without front support arms - Approx. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 9605075, Offer 22537 Technical data: - max. working width 4040 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.5 - 3° - Cutting gap adjustment, hydraulic - Number of hydraulic clamping cylinders 22 pcs - Motorized backstop with positioning control 10 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 15 strokes/min - Hydraulic drive 400 V / 7.5 kW - Pneumatic connection 6 bar - Table height 770 mm - Space requirement approx. W 5100 x H 2250 x D 2150 mm - Weight approx. 9000 kg - includes: - Electronic foot switch Lajdpfx Amjimq A Iemec - Cutting line illumination - Sheet metal lifting system, pneumatically assisted

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Technical data: - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm Lajdsvmmruopfx Ammjc - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min - drive 400 V / 45 kW - table height 700 mm - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch - cutting line lighting

Condition: good (used), Year of construction: 1988, machine/vehicle number: 211, Offer 25176 Technical specifications: - Maximum working width 2040 mm - Maximum cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-down clamps: 11 - Motorized backgauge 10 - 700 mm - Front angle stop Lajdpfxowlqxzj Ammec - Stroke rate depending on cutting angle and cutting length: 7 - 17 per minute - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including backgauge, without front support arms - Approx. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - With: - Electric foot switch - Cutting line illumination

Condition: good (used), Year of construction: 1998, machine/vehicle number: 98095307, Offer 24271 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0.5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 18 pcs. - mot. Rear fence with positioning control 10 - 1000 mm - Front angle fence - Stroke rate depending on cutting angle and cutting length 9 - 17 per/min - Pneumatic connection 6 bar - Hydraulic drive 400 V / 15 kW - Table height 770 mm - Space requirement incl. back gauge, - approx. W 4050 x H 1600 x D 2450 mm - Weight approx. 5500 kg - with: - E-foot switch Lodpfx Ast Tw Uismmeac - Cutting line lighting - Sheet support - Rear guard with protective grille

Condition: good (used), Year of construction: 2009, machine/vehicle number: 150042, Offer 25328 Technical Data: - Max. cutting width: 3200 mm Lajdpfxsxl Rype Ammoc - Max. cutting capacity at 45 Kp/mm²: 12 mm - Frame throat depth: 175 mm - Cutting angle: 1.48° - Manual blade gap adjustment - Number of hold-downs: 13 units - Strokes per minute: up to 10 1/min - Front squaring arm approx.: 1100 mm - 2 front support arms approx.: 1100 mm each - Motorized back gauge with positioning control up to: 1000 mm - Rear area safety with light barrier - Cutting line illumination - Working height: 860 mm - Electric foot pedal - Drive: 400 V / 19.5 kW - Space requirements (approx.): W 4150 x H 2150 x D 2300 mm - Weight (approx.): 8.5 t

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° Lsdpfsx A Tpnex Ammeac - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2708, Offer 23478 Technical data: - max. working width 3030 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustment - Cutting gap adjustment Lajdpfeq R T U Djx Ammsc - Number of hydraulic hold-down devices 17 pcs - Motorized backgauge with positioning control ELGO 10 - 950 mm - Back gauge with safety guard - front angle fence + 2 support arms - max. stroke rate at max. cutting length 13 per/min - Hydraulic drive 400 V / 11 kW - Table height mm - Space requirement incl. back gauge, without front support arms, without safety guard - approx. W 3800 x H 1840 x D 2350 mm - Weight approx. 7500 kg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1172, Offer 23443 Technical data: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30 ° - Cutting gap adjustment by hand - Projection 200 mm Ljdpfx Amorckh Sjmsac - Manual backgauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirement incl. backgauge - approx. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3219, Offer 24295 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - throat 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-down devices 16 pcs - Motorized back gauge with positioning control 20 - 1000 mm Ljdeu Upafopfx Ammoac - Front angle fence + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 per/min - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space requirement incl. back gauge, without front support arms - approx. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - electric foot - switch - cutting line lighting - - cutting length preselection - Rear guard with light barrier

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW Lsdpfx Aeyv N I Aommeac weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: new, sheet width 1350 mm 3 mm sheet thickness for stainless steel 1,5 mm rear stop 600 mm total power requirement 3 kW weight of the machine ca. 1150 kg dimensions 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity Laodpfx Amjyv Nt Sjmec frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity