Used Dust Extraction Blower 0.6 Kw for sale (39,713)

Condition: new, Year of construction: 2026, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Fjdpfxjudaazo Accjgc Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER 300 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 45 DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 Fgjdpouc Unqsfx Accoc 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg

Year of construction: 1999, condition: good (used), DISA dust extraction, welding fume extraction, self-cleaning cartridge filters, pneumatic filters, vacuum filters for plasma, laser, sandblasting, soda blasting, shot blasting, plastics and catalysts, mineral processes and all kinds of dry dust. The filter is cleaned pneumatically with compressed air impulses during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. Highly durable filter cartridges resistant to moisture. Aluminized, antistatic, operating temperature up to 135 degrees celsius. Fan power 11 Kw Efficiency up to 8000 m3/h. Vacuum up to 4300 Pa Filtration surface 128 m2 Fgsdpfx Acohqd Tvecsc

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Fsdpfx Acerhidmocsgc Complete with , pneumatic gate valve , silencer and partial piping.

Condition: good (used), Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Motor: Besel type SKG71-2B 0.55 kW -Speed: 2810 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 170 x 50 mm -Connection input: Ø 85 mm -Connection output: 60 x 75 mm Fgjdpfx Acsuqq Rlecoc -Dimensions: 350/300/H260 mm -Weight: 11.5 kg

Year of construction: 2010, condition: used, Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm Fgedpon Srvyefx Accsc -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

Year of construction: 1994, condition: used, Pressure blower, radial fan, high pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: VEB ILKA, radial fan extraction fan -Type: IRHMF160 / 2 see photo type plate -Engine power: 3.4 kW / 2900 rpm -Volume flow: 0.242 - 0.694 m³/s -Inlet: Ø 160 mm -Connection output: 250 x 160 mm Fsdpfxeuncxie Accegc -Fan wheel: Ø 500 mm -Dimensions: 780/490/H1030mm -Weight: 88kg

Condition: used, Year of construction: 1977, Side channel compressor, side channel blower, ring blower, vacuum pump, blower Fgsdpeun Dwmefx Accjc -Manufacturer: Becker, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: Dietz 3.0 kW 2870 rpm -Speed: 2850 rpm -Flow rate: 250 m³/h -Compression pressure: 240 mbar -Dimensions: Ø 480 x 560 mm -Weight: 67 kg/piece

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 L -Engine power: 0.155 kW -Speed: 1400 rpm Fedpsuqf Ufofx Accegc -Volume output: 18.5 m³/min -Fan wheel: Ø 160 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 110 mm -Number: 3x blowers available -Price: per piece -Dimensions: 370/340/H320 mm -Weight: 8.1 kg/piece

Year of construction: 1989, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, radial fan double -Type: 2 E 10 1800 -Engine power: 11 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 62 mm Fgsdpjval Smjfx Accsc -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 1150/890/H1280 mm -Weight: 410 kg

Condition: excellent (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Exhaust fan: heat-resistant -Dust extraction fan: radial fan -Motor: 7.5 kW 1465 rpm -Connection: Inlet Ø 600 mm Fodoxlzdljpfx Accjgc -Connection: Outlet Ø 400 mm -Volume flow: m³/h -Dimensions: 1985/1570/H1780 mm -Weight: 442 kg

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 310/220/H270 mm -Weight: 8.2 kg Fodpfswk Ey Rox Accogc

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower Fgjdpfx Aeww T Ezsccsc -Manufacturer: Elektror, side channel blower side channel compressor -Type: SD-4N/S892 -Drive: 1.2 kW -Speed: 2800 rpm -Flow rate: 2.8 m³/min / 168 m³/h -Compression pressure: 180 mbar -Dimensions total: 450/360/H370 mm -Weight: 24.7 kg

Condition: used, High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan -Motor power: 1.1 kW -Speed: 2870 rpm -Volume output: m³/h -Pressure increase: Pa -Connection inlet: Ø 270 mm (without nozzle) -Connection output: 100 x 140 mm -Number: 1x fan available -Price: per piece Fjdpfx Acedz Umiscogc -Dimensions: 540/400/H775 mm -Weight: 40.5 kg

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower Fgedpfx Asun Dvieccsc -Manufacturer: VEB, side channel vacuum pump side channel compressor -Type: GR2HVX-40/290-P -Drive: VEM 1.5 kW 2840 rpm -technical data: see photo type plate -Dimensions: 400/330/H430mm -Weight: 32 kg/piece

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Meidinger, blower radial fan with support frame -Engine power: 0.55 kW Fgedpfx Ajun Dv Njccoc -Speed: 2850 rpm -Volume output: 42 m³/min -Protection class: IP 44 -Fan wheel: Ø 300 x 110 mm -Connection input: Ø 190 mm -Connection output: Ø 190 mm -Dimensions: 630/530/H560mm -Weight: 48 kg

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 Fgodsun Dwgopfx Accjc -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 165 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 108 mm -Dimensions: 370/365/H310mm -Weight: 8.2 kg

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower, dry suction -Manufacturer: Dürr-Dental, side channel vacuum pump side channel compressor for dry suction -Type: 9000.102.09 -Drive: 220 V / 370 W -Connection input: Ø 32 mm Fgjdpfx Acsupbcvecec -Connection output: Ø 32 mm -Dimensions: 310/260/H270 mm -Weight: 14.8 kg

Condition: excellent (used), High-pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower Fgsdob Uhp Rspfx Accsc -Engine power: 11 kW -Density: 1.2 kg/m³ -Volume output: 84 m³/min -Pressure increase: 3800 Pa -Connection input: Ø 275 mm -Connection output: Ø 270 x 130 mm -Dimensions: 1000/800/H700 mm -Weight: 252 kg

Condition: good (used), geared motor, electric motor Fgsdpfx Aef D Tl Hoccsc -Speed: 80/40 rpm -Power: 1.0/0.6 kW -Design: B5 -Shaft diameter: 48 x 110 mm -Brake: 23.3 Nm -Protection class: IP 44 -Price: per piece -Quantity: 2 pieces -Dimensions: 690/251/H320 mm -Weight: 55 kg

Condition: used, Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Stralfors, side channel blower with control box and filter -Type: 739641 704793-04 -Serial No: 04-BLOW-16 -Drive: Emerson Electric 250W -Speed: 2850 rpm -Individual components: see photos -Dimensions: 460/370/H310mm Fgsdpfx Acsra Rpfjcsc -Weight: 20kg

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: VEM, gear motor -Type: ZG2 BMREB 90L4-8 AF -Speed: 100/50 rpm -Power: 1/0.6 kW -Design: B5 -Shaft: Ø 32 x 80 mm -Protection class: IP 44 -Dimensions: 585/200/H250 mm -Weight: 40 kg Fgedpfx Aceuh H Hvecsc

Condition: used, Year of construction: 1996, Radial fan, centrifugal fan, centrifugal blower, chip extraction fan, fan, suction, chip blower, high performance fan -Manufacturer: Reitz, radial fan chip extraction fan type MXE 020-018030-00 -Engine: Dutchi DM 160 MX2 15 kW -Speed: 2935 rpm -Volume flow: 180 m³/min / 10800 m³/h -Connection input: Ø 245 mm Fedpfxsqvp N Dj Accegc -Connection output: Ø 390 mm -Dimensions: 1460/1160/H1500 mm -Weight: 392 kg

Condition: good (used), electric motor, three-phase motor Fgsdpfx Acscfgx Uecsc -Power: 0.6 kW -Speed: 925 rpm -Shaft: Ø 18 mm -Design: B3 -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 360/170/H240 mm -Weight: 22 kg

Condition: good (used), Geared motor, electric motor, three-phase motor, right-angle gear motor Fgodocmtn Aspfx Accec -Speed: 25 rpm -Power: 0.6 kW -Voltage: 500 VOLT Y -Design: B3 -Shaft diameter: Ø 38 mm -Protection class: IP 44 -Price: per piece -Quantity: 2 available -Dimensions: 490/250/H290 mm -Weight: 39 kg