Used Eba 5560 for sale (1,274)

Condition: excellent (used), Catalog number: 8058 TECHNICAL DATA - max. log diameter approx. 750mm - main engine 55kW ADVANTAGES – German-made – for debarking logs – used debarker, very good condition – machine equipped with a feeder and an outfeed – video showing the machine in operation *This is a courtesy listing – the machine is located at a sawmill 15 km from the company's headquarters. Net price: 105,000 PLN Isdpfxjzpwryj Ai Tstk Net price: 25,000 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: used, mileage: 772,514 km, power: 346 kW (470.43 HP), first registration: 12/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Cab: GX (wide, long, extra-high) * Cab mounting: Comfort * Roof spoiler: Transport position, adjustable * Glass sunroof: Electric * Side flaps: Foldable, right and left * Windshield: Laminated safety glass (VSG), tinted * Windshield washer system: Windshield * Sun visor: Electric for windshield, mechanical for door side windows * Interior color: Moon Grey * Interior styling: Analog color ambiance * Upper bunk: With slatted base, fabric underlay, 70 mm mattress * Lower bunk: With slatted base, fabric underlay, 70 mm mattress * Storage compartment: Rear, left and right, accessible from outside and inside * Refrigerator: Pull-out, central area, rear * Air conditioning: Climatronic, electric auxiliary heater * Water auxiliary heater: 4 kW * Seats: Driver and passenger comfort seat, air-suspended, with lumbar support, shoulder adjustment, seat heating, armrests * Multifunction steering wheel: Height and tilt adjustable * Digital tachograph: Digital, with remote communication (DSRC), CONTINENTAL * Connectivity: Connectivity board module, remote download for tachograph, Toll Collect preparation * FleetBoard ----Safety & Assistance Systems* Electronic Stability Program (ESP) * Anti-Slip Regulation (ASR) * Adaptive Cruise Control (ACC) Stop and Go, distance-regulated * ECO modes for speed control * Emergency Braking Assist (EBA), non-switchable * Cruise control function MAN EfficientCruise, terrain-dependent * Lane Departure Warning (LDW) * Turning assistant * Full braking assistant * High-performance engine brake MAN EVBec, step-adjustable * Retarder, speed-dependent, step-adjustable * Disc brakes on front and rear axles * Rollaway prevention MAN EasyStart * Brake pad thickness display, with brake pad wear warning ----Lights and Signals * Headlights: H7 * Daytime running lights: LED * Fog lights: H7 * Cornering lights: H7 * Headlight range adjustment: Automatic * Work lights: Halogen, white, rear, bottom, outside * Horn: Two-tone, electric ----Interfaces and Superstructures* Fifth wheel coupling: JOST JSK 42 MK 2 inch, automatic lubrication, extended handle * Fifth wheel trailer brake connection: 2 lines, behind cab * Fifth wheel trailer socket: 24 V, 15-pole * Spiral cable: Electric, for trailer socket ABS, behind cab * Interface for vehicle data (FMS) ----* Engine: Diesel engine MAN D2676 LF79, 346 kW (470 hp), 2,400 Nm torque, Euro 6d Isdpfszaic Hjx Ai Tetk * Transmission: MAN TipMatic 14.30 OD, with Retarder 35 * Permissible total weight: 18,000 kg (National), 19,000 kg (Technical/Technical Plus) * Total weight of vehicle train: 40,000 kg (National), 44,000 kg (Technical/Technical Plus) ----Chassis and Axles* Front axle: 8,500 kg, non-driven, angled, steered, non-liftable * Rear axle: 13,000 kg, HY axle without through-drive, straight, non-steered, non-liftable * Suspension: Air/Air (LL) on front and rear axles * Axle ratio: i=2.53 * Differential locks: Driven rear axles * Front axle rims: Steel, 1-piece, 10-hole 11.75x22.5 * Rear axle rims: Steel, 1-piece, 10-hole 9.00x22.5 -----* Tire dimension front axle: 355/50R22.5 * Tire dimension rear axle: 295/55R22.5 * Fuel tank: 960 liters * AdBlue tank: 80 liters * Technical total weight: 19,000 kg * Unladen weight: 8,104 kg * Permissible trailer load: 26,470 kg * Overall length: 5,995 mm * Wheelbase: 3,600 mm ----Vehicle number/Vehicle: 11995----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed.-----We are happy to assist you with all formalities related to the pur

Condition: ready for operation (used), Year of construction: 2019, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, For sale: a Felder Format4 Tempora F600 edge banding machine in very good condition. The machine comes from a professional interior design workshop and has always been carefully maintained and used. The Tempora F600 is known as a very reliable industrial edge banding machine with a high processing speed (10/18 m) and excellent finishing quality. The machine is in full working order and can be put into use immediately. Specifications: Brand: Felder Model: Format4 Tempora F600 Year of construction: 2019 Features include: Smartouch touchscreen control Program settings with memory Anti-glue adhesion fluid Pre-milling unit For panels with a thickness up to 60mm Radius milling cutter, top and bottom Corner rounding unit Isdpfey R I Rfsx Ai Tstk Radius scraper unit Flat scraper unit Glue remover fluid Polishing unit Automatic feed Suitable for processing: ABS edge banding PVC edge banding Veneer edge banding Solid edge strips Condition: The machine is in good technical and optical condition and has always been periodically maintained and cleaned in a professional workshop. Delivery: The machine can be picked up in the condition as shown in the photos. Inspection: Inspection is possible by appointment in Rijnsburg. Transport: To be arranged by the buyer. Available from mid-July. Asking price: €26,490,- excluding VAT.

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Rotor motor: 75 kW Itodsw Emhfspfx Ai Tsk Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm Ijdpfxox S Hmze Ai Tstk - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: not inspected (used), Used Segem debarking machine for sale. Information available upon request. Itsdpfx Aezr Ev Soi Tsk

Condition: excellent (used), Year of construction: 2000, Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2000 Isdpfxszbyvaj Ai Tjtk • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, Used Automatic Edgebander for sale! Manufacturer: SCM Model: K1000 Year of manufacture: 2007 Status: dismantled and ready for transportation immediately! Location: Lithuania Equipment and technical specifications Edgeband thickness max 8 mm Panel thickness max 50 mm Thickness of coiled edgeband max 3 mm Workpiece length min 65 mm Ijdoya Tv Repfx Ai Tjtk Feedrate max 18 m/min

Condition: used, Year of construction: 2014, 35/75 m/min dimensions of saw-band 3350x27x0,9 mm capacity 90 degrees: round 260 mm capacity 90 degrees: flat 300x260 mm capacity 45 degrees: round 200 mm capacity 45 degrees: flat 180x180 mm 130 mm 120x120 mm 25 mm 90 mm min. dia. 5 mm work height max. 750 mm total power requirement 1,1/1,8 kW dimensions 1900x1500x1860 mm Iodpfx Aey Ty Eyoi Tjtk weight of the machine ca. 900 kg weight 660 kg

Condition: used, Year of construction: 2004, - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Edge banding machine Manufacturer: Brandt Type: KDF 560 Year of manufacture: 2004 Technical data - Voltage: 400 V / 50 Hz / 3 phases - Connected load: 13.2 kW - Fuse rating: 35 A Equipment - Automatic unit adjustment via the PC control system - Control: Brandt Power Control PC20+ - Suitable for thin and thick edges (ABS, PVC, veneer, and solid wood edges) - Edge thickness: approx. 0.4 to 8 mm - Workpiece height: approx. 8 to 50 mm - Feed speed: 14 m/min Installed units - Pre-milling unit - Glue application unit (hot melt) - Pressure zone with pressure rollers - Cut-off saw - Edge trimming/radius milling unit (top and bottom) - Corner rounding unit - Radius scraping blade - Glue scraping blade - Polishing units Iodpfx Aszux T Aei Tstk Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Year of construction: 2016, condition: good (used), For inquiries: Ijdpfowkf Twex Ai Tstk Zoltán Utasi +36 30 205 7380 • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: used, machine/vehicle number: 008519, Type of edging: Thin edge, Thick edge Gluing System: PUR, Laser Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Isdpfxjzruyto Ai Tjtk Operating Units: 12 nr

Condition: good (used), Year of construction: 2012, overall weight: 3,000 kg, year of last overhaul: 2025, Equipment: CE marking, - HOMAG KAL211 EDITION 2264 Year of manufacture: 2012 OVERVIEW OF AGGREGATE CONFIGURATION: - Control: powerControl PC22 Iedpfjyz Dbbsx Ai Tjtk - Top pressure with composite V-belt - Feed rate: 18 - 25 m/min - Workpiece thickness: 60 mm instead of 40 mm - Total length: 7845 mm - Electronic height adjustment FPR/L260+EDITION+FSQ - Quick-clamp system for application unit QA/PU - Separator spraying unit above/below - Jointing milling unit - Gluing station A20 with Quickmelt application unit - Magazine 2 manual, 2 rolls - Preparation for Lasertec activation unit - End trimming unit HL84 chamfer/straight - Automation package chamfer/radius AMB/EDITION2264/74 - Pre-milling unit BF10 1.5 kW - Contour milling unit FK11 manual - Profile scraper PN10 - Finishing unit - Glue joint scraper - Buffing unit - Drying box with nitrogen

Condition: used, Year of construction: 1996, Brandt edge banding machine in good, used condition. KTV51 - Year of manufacture 1996 The machine was purchased used and only used occasionally. The machine is being sold as part of the closure of our carpentry business. Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. Ijdozpflnjpfx Ai Tetk An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our premises in Stemwede.

Condition: used, Year of construction: 2014, For inquiries: Itsdpfsx Huhcex Ai Tjk Zoltán Utasi +36 30 205 7380 • motorized pressure bridge adjustment • Electrical system for stepless feed 400 V / 50 Hz, 2.2 kW • “Control PPC 221 – with 8.4'' VGA color display” High-performance control with very simple operation • Edging pre-milling unit 1802, 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for pre-milling the panel edge • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation For pre-milling unit 1801 / 1802 • Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation For pre-milling unit 1801 / 1802 • Edge feeding unit 1903 SYNCHRO automatic transport of rolls and strip material • Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) • Pressure unit 1913 pneumatic first roller driven, 2 additional pressure rollers with pneumatic individual control • Cut-off unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically swivelable 0/10° • Multifunction milling unit 1827 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) • Vertical tracing rollers manual manual adjustment of the vertical tracing roller by 0.1 mm for milling edge overhang, e.g. for plastic edges • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, left-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Cutter, diamond Ø 56 / 60 mm, Z = 2, R = 2.0 mm, right-hand rotation Diamond-coated, solid tool with CM technology (LEUCO system) with integrated chip extraction, patented ProLock-E • Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12,000 rpm), for edge thickness up to 3 mm • Cutter, diamond Ø 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profiling unit 1832 • Scraper unit 1929 pneumatic including pneumatic adjustment (separately for top and bottom) • HW reversible knives for scraper holder 1929 / 1927 R = 2.0 mm (2 pcs required) • Flat scraper unit 1964 Removing glue residue for a clean glue joint. • Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) For final cleaning and edge polishing. With 2 textile discs, swivel range 0–5°

Condition: used, The machine was in operation until the very end. Itodpfjzqzvxsx Ai Tek

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: Currently still in production Equipment and technical data: Glue pot Pressure zone Cut-off saw Combination milling (radius 2 mm), flush trimming Workpiece thickness: 8 - 50 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm Edge thickness: 0.4 - 3.0/5.0 mm Maximum edge height = workpiece height + 4 mm (2+2) Electrical connection: 400V, 50 Hz, 3-phase Total connected load: 3.2 kW Ijdpfxoynpc Ne Ai Tetk Feed speed: 8.0 m/min Pneumatic connection: 6 bar Net weight: 550 kg Optional retrofits for the machine: Radius scraper Flat scraper Buffing unit Location: NRW Availability: Approx. December 2025

Condition: excellent (used), SCM K560 HP Edge Bander Liquids Pre-milling cutters, Roller glue application, Replaceable tank Features a glue drain Pneumatic pre-trimming guillotine, Ijdezlta Sopfx Ai Tetk Liquids Finished edge trimming knives Top-and-bottom milling unit (multi-cutter R1-R2), Corner rounding unit, Profile edge trimming cutter (multi R1-R2), Liquids Flat edge trimming cutter, Polishing unit The machine has CNC control Max. workpiece height 60mm Max. veneer thickness in roll 3mm, Feed rate 12 and 18 m/min Inspection and testing possible on-site

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Iedpfxeza Uq Ao Ai Tstk Liquids Top and bottom milling unit, R1 – R2 Profiling cylinder Corner rounding unit Flat cylinder, Polishing unit Pneumatic 3-point adjustment Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Max. part thickness: 50mm Used machine, very good condition Mileage: 62,000 meters

Condition: used, Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, working width: 900 mm, number of blades: 5, power of feed motor: 22 W, ZE 905 in good condition. Sale by customer order! Max. pass-through 90 cm. Feed speed 32 m/min. Central lubrication. Regular service always performed. Runs very smoothly and can be inspected in operation. Machine is being replaced by a new one with Variopress system! Itjdpfx Asy R Avvji Tok

Condition: used, Factory-reconditioned edge processing line for 3 mm edges Manufacturer: IMA Type: Combima Consisting of: Machine 1: Used edge processing machine from IMA, type COMBIMA Factory-reconditioned with a 12-month warranty - Working width max. 1,500 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Milling unit with 1 motor, 4.4 kW, 100 Hz - Hot melt adhesive unit with 2-roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 2 motors, 1.5 kW - Chamfering unit with 2 motors, 0.6 kW - Profile drawing blade unit - Straight drawing blade unit - Edge sanding/buffing unit - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB - 1 used rotating device for changing from longitudinal to transverse - Factory-reconditioned with a 12-month warranty - Max. panel length 2,500 mm, max. panel width 1,500 mm Machine 2: Used edge processing machine, manufacturer: IMA, type COMBIMA Isdpezuyqvefx Ai Totk Factory-reconditioned with a 12-month warranty - Working width max. 3,000 mm, edge thickness approx. 0.3 - 3 mm - Rolling needle bearing chain, drive with 3 kW motor, steplessly adjustable from 9 - 45 m/min - Motorized width adjustment with electronic setpoint and actual value display - Protective milling unit with motor 3.3 kW, 100 Hz - Double trimming unit with 2 motors, 4.4 kW, 100 Hz - Enclosed gluing unit with double roller magazine and automatic Quickmelt hot melt adhesive feed - Trimming unit with 2 motors, 0.4 kW - Pre-milling and flush milling unit with 1 upper and 1 lower motor, 0.4 kW - Chamfering unit with 2 motors, 0.4 kW - Copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear lower workpiece profiles, copy milling unit with 2 motors, 150 W - For milling off strip overhangs on front and rear upper workpiece profiles, profile drawing blade unit - Straight drawing blade - Buffing unit - Center support - Pull-out rollers 800 mm - Beckhoff control system with screen - Electronic converter 100 Hz, manufacturer: KEB - Electronic converter 200 Hz, manufacturer: KEB Delivery time after order placement approx. 4-6 months (depending on current workload and scope of desired work). Individual machine configurations are possible according to customer requirements, as the machines are disassembled down to the base frames and reassembled after replacing all wear parts.

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Iedpfx Aiju Hldms Tstk Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Year of construction 2013 CE

Condition: excellent (used), SCM K360 Edge Bander Liquids Preliminary cutters, Roller glue application, Replaceable tank Second tank included Itsdpfx Aozldikji Tsk Pneumatic preliminary guillotine, Trimming heads with optional corner rounding Pneumatically adjustable R1-R2 top-bottom milling unit, pneumatically adjustable Profile edge trimmer, pneumatically engaged Straight edge trimmer, Max. element height 60mm Max. veneer thickness in roll 3mm, Feed speed 11m/min Original mileage 48,000m Very good condition Can be inspected and tested on site

Condition: used, mileage: 490,000 km, power: 346 kW (470.43 HP), first registration: 11/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Cab: GX (wide, long, extra high) * Cab suspension: Comfort * Roof spoiler: Transport position, adjustable * Glass sunroof: Electric * Side flaps: Foldable, right and left * Windscreen: Laminated safety glass (VSG), tinted * Windscreen washer system: Windscreen * Sun blind: Electric for windscreen, manual for side door windows * Interior color: Moon Grey * Interior styling: Analog color ambiance * Upper bunk: With slatted frame, fabric underlay, 70 mm mattress * Lower bunk: With slatted frame, fabric underlay, 70 mm mattress * Storage box: Rear, left and right, accessible from outside and inside * Refrigerator: Pull-out, center area, rear * Air conditioning: Climatronic, electric parking air conditioner * Additional water heater: 4 kW * Seats: Driver and passenger comfort seats, air-suspended, with lumbar support, shoulder adjustment, seat heating, armrests * Multifunction steering wheel: Height and tilt adjustable * Tachograph: Digital, with remote communication (DSRC), CONTINENTAL * Connectivity: Connectivity board module, remote download for tachograph, Toll Collect pre-installation * FleetBoard ----Safety & Assistance Systems* Electronic Stability Program (ESP) * Traction control system (ASR) * Cruise control ACC Stop and Go, adaptive cruise control * ECO levels for speed regulation * Emergency brake assist EBA, non-switchable * Cruise control function MAN EfficientCruise, terrain-dependent regulation Iodpfx Aioy U Ttaj Tjtk * Lane Departure Warning (LDW) * Turning assistant * Full brake assist * High-performance engine brake MAN EVBec, multi-stage * Retarder, speed-dependent, multi-stage * Disc brakes on front and rear axle * Roll-off protection MAN EasyStart * Brake pad thickness display, with brake pad wear warning ----Lighting and Signals * Front headlights: H7 * Daytime running lights: LED * Fog lights: H7 * Cornering lights: H7 * Headlight range adjustment: Automatic * Work lights: Halogen, white, rear, lower, outer * Horn: Dual-tone, electric ----Interfaces and Body Equipment* Fifth wheel coupling: JOST JSK 42 MK 2 inch, automatic lubrication, extended handle * Semi-trailer brake connection: 2 lines, behind cab * Semi-trailer socket: 24 V, 15-pin * Spiral cable: Electric, for trailer ABS socket, behind cab * Interface for vehicle data (FMS) ----* Engine: MAN diesel engine D2676 LF79, 346 kW (470 hp), 2,400 Nm torque, Euro 6d * Transmission: MAN TipMatic 14.30 OD, with Retarder 35 * Permissible gross weight: 18,000 kg (national), 19,000 kg (technical/technical plus) * Gross combination weight: 40,000 kg (national), 44,000 kg (technical/technical plus) ----Chassis and Axles* Front axle: 8,500 kg, non-driven, cranked, steered, non-liftable * Rear axle: 13,000 kg, HY axle without through drive, straight, non-steered, non-liftable * Suspension: Air/air (LL) on front and rear axle * Axle ratio: i=2.53 * Differential locks: Driven rear axles * Front axle rims: Steel, 1-piece, 10-hole 11.75x22.5 * Rear axle rims: Steel, 1-piece, 10-hole 9.00x22.5 -----* Tyre size FA: 355/50R22.5 * Tyre size RA: 295/55R22.5 * Fuel tank: 960 ltr * AdBlue tank: 80 ltr. * Technical gross weight: 19,000 kg * Unladen weight: 8,104 kg * Permissible trailer load: 26,470 kg * Overall length: 5,995 mm * Wheelbase: 3,600 mm * Next safety inspection (SP) due: 05/2026 ----Vehicle number: 11851----Subject to errors and prior sale----Advertising and various decals have been digitally removed.-----We are happy to assist you with all formalities, whic

Condition: like new (used), Hebrock F4 edger well-equipped, can be inspected before purchase, PRE-MILLING cutters, glue application with a roller, has a glue dispensing system, the glue tank is replaceable pneumatic pre-trimming guillotine, pressure rollers, final trimming saw, Isdey Dcmujpfx Ai Tstk milling unit, top and bottom, R1 – R2 Profile edging R1-R2 corner rounding unit, replaceable for 1mm and 2mm flat edging, nesting 3-point pneumatic adjustment LED lighting max. veneer thickness in roll 3mm, feed rate 7 and 10 m/min, power consumption 7.08 kW, the list price of a new machine with this equipment is over 51,000 EUR Machine from 2026, showroom model, operating time 18 hours.