Used Ecotax Fb 700 C for sale (59,727)

Condition: new, * IMMEDIATE AVAILABILITY * Including lowering loading platform / high tarpaulin 155cm / manual hydraulics / braked Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 1,300kg • Unladen weight: approx. 375 kg • Payload: approx. 925 kg • Internal dimensions: 272 x 162 x 155 cm (L x W x H) • Overall external dimensions: 434 x 228 x 210cm (L x W x H) • Loading edge height: approx. 48 cm • Tyres: 165R13C steel rims • Brakes: yes • Jockey wheel: yes, 45mm with clamp • 100km/h package: available at extra charge • incl. Vehicle documents Body/Build: • Floor: multiplex wooden floor • Side walls: aluminium, anodized, 3-sided • Side wall height: 10cm • Chassis: low-loader, lowering function, AL-KO rubber suspension axles • Tipping function: lowering • Hydraulics: hand pump • Ramp angle: approx. 6° • Wheel chocks: not included • Brake mechanism & overrun device: AL-KO • Frame/chassis: welded, hot-dip galvanized steel frame • Lashing rings: 8 recessed side lashing points • Winch: available at extra charge • Supports: rear support • Ramps: rear drive-over end sections • Lighting connector: 13-pin • Type approval: COC documents Standard Equipment: • Multiplex wooden floor – extremely robust • Fixed side walls 10mm • Mounting sleeves at all corners for e.g. tarpaulin frame • Very sturdy welded steel frame • Fully hot-dip galvanized frame • Numerous cross beams for high point load resistance • Hydraulically lowering platform • Mechanical safety lock for swivel axle during driving • Rear drive-over end section • Additional continuous longitudinal struts welded in • Front storage box • 8 lashing points inside the loading platform • Swivelling number plate holder at the back for easier loading • AL-KO overrun device and handbrake • AL-KO coupling head • Very robust reinforced V-drawbar • Automatic reverse function • 13-pin connector • Reversing lights • Large safety lighting • Integrated rear fog light • Rear lighting recessed into the frame • Center jockey wheel with clamp • Registration documents: COC Special Equipment Included in Price: • Original Vezeko tarpaulin and frame, 155 cm high - Color: black (other colors available on request) • Tarpaulin system assembly Optional Accessories – please enquire: • 100km/h approval with shock absorbers • Anti-theft device • Spare wheel • High tarpaulin • Additional lashing rings • Reversing lights • Lashing straps • and more Iedpfxjyalxwj Ab Noib New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Vehicle registration document can be sent in advance, or temporary plates (Germany) can be provided. - Export license plate incl. customs documentation possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available from us! We have been authorized dealers & repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to error, mistakes and prior sale -

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 30715522, operating pressure: 10 bar, usable tank capacity: 270 l, Submitting a bid constitutes an obligation to collect the item on time by 27/02/2026! TECHNICAL DETAILS Operating pressure: 10 bar Effective delivery rate: 570 l/min MACHINE DETAILS Connected load: 4 kW Voltage: 400 V Pressure vessel capacity: 270 l EQUIPMENT Duplex filter set WBF 63 MFO/CA (consisting of microfilter and activated carbon filter including automatic float drain) Oil-water separation system KON-C2 incl. inlet and outlet fittings Ijdpeyfn Ewefx Ab Neib 2 fully automatic vessel drain valves KN 1.230

Condition: excellent (used), Year of construction: 2007, Manufacturer: Krauss Maffei Type: KM 650-3500-700 CZ Year of manufacture: 2007 Control system: MC 4 Clamping Unit: Clamping force: 650 t Opening stroke: 1,150 mm Minimum mold installation height: 600 mm Maximum platen daylight: 1,750 mm Iedpfx Aox Uqa Dsb Neib Tie bar spacing (h x v): 1,100 x 900 mm Platen dimensions (h x v): 1,510 x 1,370 mm Centering (nozzle-ejector plate): 200 / 200 mm 1st Injection Unit: Screw diameter: 80 mm Maximum shot weight in PS: 1,400 g Shot volume: 1,543 cm³ Injection pressure: 2,205 bar 2nd Injection Unit: Screw diameter: 45 mm Shot weight in polystyrene: 278 g Shot volume: 305 cm³ Injection pressure: 2,336 bar Accessories: 2 x air valves 16-fold cascade 3 x core pullers on moving platen 3 x core pullers on fixed platen 20 x hot runner controllers Robot interface: Euromap 67 Dimensions: Total weight: 34,500 kg Overall size (L x W x H): 7.8 x 2.5 x 2.5 m Operating hours: 45,400 h Machine can also be operated as a single-component machine (1K).

Condition: used, Year of construction: 1992, Manufacturer : Norden Iijdpsx R D Exofx Ab Nsb Model : Nordenmatic 700 Year : 1992 Type: Automatic tube filling and sealing machine Capacity: 70 tubes max Filling volume: 1 - 300 ml Dosing accuracy: +/- 0.1-0.5% Tube size range: Length: 50-250 mm / Diameter: Ø 10-50 mm Empty tube feeding : automatic Cleaning + Tube orientation device with a stepper motor Sealing Module: HA - Hot Air Number of buckets: 22 units Product feed hopper + dosing pump Vulcanic Vulcatherm cooling unit (year: 2004) - 3.5 kW (10°C - 35°C) / Outlet temperature: 25°C max - min 3°C Laminar flow Machine dimensions: 135 x 190 x 210 cm Weight : 2 400 kg Spare parts sold with the machine. Choose from two formats among many available formats (additional formats can be added as an option). Full documentation available Video in operation available

Condition: like new (used), Year of construction: 2018, GM - FB330 Finishing Solution Year of Manufacture: 2018 _____ Machine Specifications and Equipment: HIGH-PRECISION FINISHING MACHINE  Max. web width 330 mm  Min. web width 50 mm  FLAT BED HOT FLOW PRESS UNIT  Speed 6000/H embossing or 10-15m/min  Web width 110mm - 330mm Iedpfxevvmnns Ab Nsib  Substrates 50-200um  Label paper 60-120 g.  UPM Vellum natural wine paper. RAFLACOAT RP48AT semi gloss paper  All other substrates must be tested by GM  Polymer (blind embossing ONLY)  Sheet thickness: 5-10mm. 7mm is standard  Backing plate, self-adhesive rubber (1-3mm). SH65  Plate size and type 304.8 x 330mm. 5-9mm magnesium  Plate pressure 30 tons  Foil feed transverse and longitudinal direction (rotating tower)  Temperature contr. 80°-130°C  Heating time 20 min.  SCREEN PRINTING UNIT  Speed 4000/h overlays or 5-15 m/min.  Web width 110mm - 330mm  Frame size 660mm x 500mm  Frame type 30mm x 30mm aluminum frame  Print area 330mm (length) x 330mm (width) MACHINE: Fully servo-driven line with web tension control. Modular design can be equipped with e.g. hot air drying and inkjet, etc. Modern single-sided housing for easy retraction and maintenance. 1. UNWINDER 2. WEB EDGE CONTROL 3. FLAT BED SHEET IMPACT UNIT 30 ton high precision flatbed unit delivers superior blind embossing and hot foil quality Servo Drive System ensures consistent pressure and embossing time at all speeds Integrated foil saving function Swivelling foil tower can be used on both sides A single module for blind embossing and/or flatbed hot foil The system uses magnesium, brass/sheet metal or polymer plates Plates can be changed while hot using a carriage system 4. SCREEN PRINTING UNIT Servo register system for print marks or optional label distance sensor Pneumatic squeegee with servo movement 5. REWINDER Rewinder for roll diameters of Ø600mm (depending on job/material) Electronic control of speed, position and torque Automatic control of the rewind tension for every speed and all rewind diameters Pneumatically replaceable rewind shaft Ø 76mm Inner and outer winding

Condition: used, Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-100-700-PPV-A -Lifting stroke: 700 mm -Piston: Ø 100 mm -Piston rod: Ø 25 mm / M20 x 1.5 -Max. Pressure: 10 bars Iiodpfxoiiwf Ns Ab Neb -Dimensions: 925/110/H165 mm -Weight: 12 kg

Condition: used, Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: FESTO -Type: CPV10-GE-FB-8 -Electrical connection Iiodscuh Ecjpfx Ab Nob -Dimensions: 195/125/H80 mm -Weight: 1.2 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams Ijdpfxod Nhimo Ab Nsib -Type: DNC-50-700-PPV-AQ -Pressure: max. 12 bar -Stroke: 700 mm -Piston diameter: 50 mm -Dimensions: 885/65/65 mm -Weight: 5.5 kg

Condition: good (used), Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, single block, double block -Manufacturer: Siemens, Simatic C1 Double Block Electronic Module -Type: 6EC1 700-3A -Quantity: 1 module available -Dimensions: 65/20/H100 mm Iisdoh Apz Uopfx Ab Nsb -Weight: 0.1 kg

Condition: good (used), Tray trolley, paint drying trolley, specialized transport trolley, transport trolley, platform trolley, carrying arm trolley -Hardware trolley: Heavy-duty paint drying trolley with 15 levels Ijder Ngp Aspfx Ab Neib -Total length: 1660 mm -Total depth: 700 mm -Total height: 2040 mm -Quantity: 1x transport trolley available -Weight: 93 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible Iijdjb Iqf Nspfx Ab Neb -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Condition: good (used), Tray trolley, paint drying trolley, specialized transport trolley, transport trolley, platform trolley, carrying arm trolley -Hardware trolley: Heavy-duty paint drying trolley with 16 levels -Total length: 1200 mm -Total depth: 700 mm -Total height: 2000 mm -Number: 9x transport trolleys available -Price: per piece Iisdpfx Abetr R Dbo Nsb -Weight: 60 kg

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 670 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 470 mm, nominal power (apparent): 10 kVA, controller manufacturer: SELCA, controller model: 3045P, table width: 490 mm, table length: 900 mm, overall weight: 4,800 kg, spindle speed (max.): 9,000 rpm, input voltage: 400 V, Vertical machining center FAMUP MCX 700 Spindle speed: 9000 rpm X-axis travel: 670 mm Y-axis travel: 480 mm Z-axis travel: 470 mm Spindle-table distance min-max: 180 - 650 mm CNC: SELCA 3045P Table size: 900 x 490 mm T-slots: 3 T-slot pitch: 125 mm T-slot width: 18 mm Taper: DIN 69871 ISO 40 Tool magazine positions: 24 Max. tool diameter: 100 mm Max. tool width: 280 mm Motor power: 10 kW Power supply: 400V Machine dimensions: 2200 x 2900 x 2965 (H) mm Iisdpfx Abjycq E Uj Neb Weight: 4800 kg

Condition: like new (used), maximum load weight: 96 kg, load capacity: 77 kg, Reconditioned ATEX centrifuge, model SCA-700. Iisdpfxjrrwclo Ab Neb

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, adjusting ring cylinders -Manufacturer: Enerpac, short-stroke heavy-duty cylinder, adjusting ring cylinder type HCL 1006 Iiedpfsktm Egex Ab Nob -Pressure force 113 ton -Stroke: 150 mm -Piston: Ø 200 mm -Operating pressure: max. 700 bar -Number: 1x cylinder available -Price: per piece -Dimensions: 230/220/H290 mm -Weight: 54 kg/piece

Year of construction: 2011, condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Pallet magazine with 10 stations, automatic tool changer with 199 stations. Accessories included with the machine: Iisdpfxoku A A Ho Ab Njb Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter.

Condition: ready for operation (used), Contraves PS 700 DC Power Supply , used, good condition, 100% functional Iiedpsi D Umhofx Ab Neb

Condition: used, Year of construction: 2019, Leadwell Vertikal Flerop BC-700T Fanuc 0i-MF controller with 10.4" LCD Chip conveyor + bucket Transformer Without linear scale Pallet package CTS function Air gun / Water gun HSK63 tooling system 12000 rpm spindle CE4 20 bar high pressure pump Automatic workpiece measurement OMP-60 Auto tool length measurement NC-4 Oil skimmer Iiedox Hfx Sjpfx Ab Nsb Auto door Network connection Spindle coolant ring X axis: 1300mm Y axis: 610mm Z axis: 610mm vertical / 750mm Horizontal Distance from table top to spindle end : 110-750mm Table LXW: 1480x610mm 600mm rotary table C Axis speed: 120-800Rpm Tool storage capacity: 30pcs

Year of construction: 2000, condition: used, Drais Mannheim / Lödige CoriMix® CM Continuous Ringlayer Mixer Iisdpjh H S Hdsfx Ab Nsb Type: K-TT 700 Motor: 55 kW 1500rpm Fully Stainless execution

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Iodpfx Abex Eu Tvj Njib

Year of construction: 1999, condition: excellent (used), injection molding machine krauss-maffai 150-700 c1 year 1999 Screw diameter 55 mm In top condition, still in operation Iiedpfx Aeh S Dncjb Neb

Condition: ready for operation (used), Maho milling table for Maho milling machine MH 700 S, milling table for interchangeable pallets 500x630 mm, used, normal signs of wear, 100% functional, scope of delivery as shown in photos. ATTENTION: Please enquire separately for costs of packing and shipping! Iodpfx Absx Dw Iwe Noib

Condition: ready for operation (used), Submersible pump Overall length: 1170 mm, immersion depth: 700 mm Manufacturer unknown, type plate is unfortunately not available, used, normal signs of use, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please enquire for packing and shipping costs separately! Iedpjx Dwgaefx Ab Noib

Condition: ready for operation (used), Maho milling head (Maho milling machine MH 700 S), used, normal signs of wear, 100% fully functional, scope of delivery as per photos. NOTE: Please enquire separately for costs of packing and shipping! Iiodpfox Dw Iqex Ab Neb

Condition: good (used), Year of construction: 2004, functionality: fully functional, We offer a Clipper compressed air clipper Poly-Clip SCD 700 year 2004 in a fully functional condition. Iiedpfx Aeu Iv E Dob Njb Workshop checked. Further information on request. Cash payment or prepayment. Sale only to traders, no guarantee, no warranty.