Used Eht Variopress 225-20 for sale (30,102)

Condition: good (used), functionality: fully functional, Year of construction: 1996, Sheet width: 3050 mm Sheet thickness: 10 mm Control: Elgo 87 P2 Blade strokes: 11 - 31 strokes/min Cutting angle adjustment: 1 - 4° Number of hold-downs: 16 pcs Pressure per hold-down: 900 kg Main motor power: 11 kW Hsdpoy H Inpjfx Ap Henn Table width: 700 mm Table height: 800 mm Dimensions (LxWxH): 4000 x 2220 x 1830 mm Weight: 6300 kg Accessories/Equipment: – digital length stop 10–1000 mm – upper and lower blade, two-piece, each 1550 mm – 1 set of spare blades – including low cart at the discharge side

Condition: used, main engine 75 Kw, lower and upper gear drive 4 Kw each, entrance 420x420 mm, 2 blades 50 mm each Hnjdpfx Apstpizpe Hsn

Condition: new, empty load weight: 300 kg, maximum load weight: 450 kg, overall weight: 750 kg, loading space length: 2,250 mm, loading space width: 1,170 mm, loading space height: 1,200 mm, Plywood box trailer Roadstar C220 from manufacturer Cheval Liberté / Debon. The box trailer comes equipped with plywood side walls, a single-wing door, support stands, jockey wheel, lashing points, robust frame, and a V-drawbar. We also offer useful trailer accessories such as lashing rails, lashing straps, and additional lashing points. The body is splash-water protected. Technical Data: Internal dimensions (LxWxH): approx. 225x117x120 cm Overall external dimensions (LxWxH): approx. 348x163x173 cm Hjdpsy Efqfofx Ap Henn Gross weight: 750 kg unbraked Unladen weight: approx. 300 kg Payload: approx. 450 kg Loading platform height: approx. 50 cm 100 km/h version: available at extra cost Tyres: 155/70R13

Condition: used, Year of construction: 2002, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Oil volume: 300 l Control: CYBELEC DNC 1200 PS Eco Total power requirement: 15 kW Hjdpfx Aexfh R Eep Honn Machine weight approx.: 10,700 kg Dimensions (LxWxH): 4200x2200x3200 mm Accessories/Equipment: – 2 bending aids in front of the machine – Parking right/left for bending aids – 3 backgauge fingers – CYBELEC DNC 1200 PS Eco control

Condition: good (used), Year of construction: 1993, Pressure 150 t folding length 3550 mm column width 3050 mm Control Cybelec DNC 880S stroke 700 mm throat 350 mm machine weight approx. 15.000 kg machine height 3.900 mm Accessories/equipment: Hnedpfsgz S S Sex Ap Hsn - Bending aid in front of the machine - Parking space for bending aid - 3 pieces stop fingers

Condition: good (used), Year of construction: 1995, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, oil tank capacity: 200 l, total length: 4,500 mm, total width: 2,200 mm, total height: 3,000 mm, controller manufacturer: CYBELEC, controller model: CybTouch 15, working width: 3,550 mm, bending force (max.): 125 t, distance between stands: 3,050 mm, control type: CNC control, type of crowning: manual, Equipment/Accessories: - Manual crowning - 3 x manual backgauge fingers Hedpfxsywr D Ae Ap Hjnn - Pneumatic die shifting - Pneumatic upper tool clamping - Foot switch - Cybelec CybTouch 15 (new 2025) - Set of upper and lower tools

Condition: ready for operation (used), Description WE OFFER AND NICE LOW USED HIGHT FREQUENCY INDUCTION HEATING MACHINE Hedpfx Ajxw N Ngep Honn FULL DATA IS ON ATTACHED PHOTOS. PRODUCED BY UK-

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. For sale due to new acquisition. Specifications: - 250 t pressing force Hedpfx Apsy D Sy Rj Henn - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Condition: used, Year of construction: 2025, operating hours: 400 h, functionality: fully functional, operating pressure: 1,000 bar, empty load weight: 3,500 kg, fuel: diesel, overall weight: 3,500 kg, HAMMELMANN AQUAJET 20 200 KW ENGINE 1000 BAR / 110 LITERS OR CONVERSION TO 2800 BAR / 40 LITERS YEAR 2024 Hnjdsx Exmajpfx Ap Hen Tel. 6 E-mail: m z ol m a r @ o p . p l

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 2550 mm distance between columns 2050 mm control CYBELEC ModEva 10 S total power requirement 25 kW weight of the machine ca. 11.000 kg Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each Hodey D T S Ijpfx Ap Hjnn - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm - Die shift CNC-controlled, infinitely variable - CNC crowning device in the table (table width min. 110 mm) without tool clamping - SICK V4000 safety device - 2 x bending aids, max. 1500 N - 2 x 2 support rails for bending aid with 14 mm T-slot and scale - 2 x table extensions for bending aid - Parking position on right and left, short

Condition: used, Year of construction: 2013, sheet width 3050 mm plate thickness 10 mm cutting angle 1-4 ° back stop - adjustable 10 - 1000 mm 13 Stück 25 mm 60 mm quantity of oil 240 l 24 1/min. total power requirement 15 kW weight of the machine ca. 6300 kg dimensions of the machine ca. 4100x3800x2000 mm Hnsdpfx Aey Dh Nujp Hon

Condition: used, Year of construction: 2005, sheet width 3050 mm plate thickness 16 mm distance between columns 3100 mm no. of strokes 16 Hub/min back stop - adjustable 10 - 1000 mm cutting angle 0,5 - 2,5 ° down holder 13 Stück oil volume 300 l total power requirement 22 kW weight 14000 kg dimensions 4100 x 2300 x 2000 mm Features: - Electro-hydraulic slide-guided sheet metal shear - With ELGO P9724 NC digital control unit * Input of target/actual values from the backgauge possible * Digital display - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Front finger guard - 1x sturdy side stop, with T-slot & mm scale - 3x front support arms - Hydraulic sheet metal hold-down - 2x emergency stop buttons at the front - Rear safety guard (protective grille) - Original operating manual * Special accessories included: - Backgauge system conveyor belt * with pneumatic sheet metal holding device Hnedpfxoyzi Nwj Ap Hjn * Conveyor belt with pneumatic scrap diverter * Return to Sender (sheet metal discharge to the operator)

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Hnsdpey Ehm Nsfx Ap Hen Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,830 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, battery manufacturer: Baden, battery voltage: 48 V, battery weight: 856 kg, fork length: 1,200 mm, tire condition: 90 %, Equipment: UVV, cabin, lighting, sideshift, new tires, very good battery 70% capacity, side shifter, half-cab (ideal for outdoor use), front windshield, additional hydraulics 1x, 3 valves Note: The forklift is in very good condition. The machine is currently located at our site in Bad Krozingen. Transport to your location can be arranged for an additional charge. Hsdpfx Ajyzz Ixjp Hsnn An invoice with VAT shown will be sent to the buyer and the stated prices are net.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 361 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Equipment: UVV, lighting, sideshift, Description & Special Features: New tyres, good battery with 70% capacity, side shifter, half-cab (ideal for outdoor use), front windscreen Hjdpsyzyxpofx Ap Hsnn Note: The forklift is in very good condition. The unit is currently located at our site in Bad Krozingen. Transport to your location can be arranged at an additional cost. An invoice with VAT shown separately will be sent to the buyer, and the listed prices are net. By placing a bid, the buyer accepts the terms and conditions of sale.

Year of construction: 1984, condition: used, 1x Wimag gantry crane Hodjyx Ercepfx Ap Hjnn Load capacity: 20,000 kg Span: 16 m (adjustable to 12 m in 500 mm increments) Outreach: 0 m Lifting height above rail: 7.5 m Hook travel: 25 m Radio remote control Cable reel suitable for 40 m

Condition: new, Year of construction: 2024, WRAVOR Horizontal bandsaws WRC 1050,1150,1225,1250,1550,2000 Hnjdpfx Apotpwgxs Hen edgers, multirip saws, mechanization etc. We are your contact for the company Wravor in Germany. We are happy to offer you the right machines.

Condition: new, functionality: fully functional, machine/vehicle number: 09550933, Year of construction: 2025, input voltage: 400 V, For sale Hoist motor NEW KBH225 B6 DH2000 Demag id nr: 09550933 for a DH2000 wire rope hoist Hnjdpfx Apsyw T Hrs Hsn NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 00128-0010-01, total width: 2,000 mm, This used Bollegraaf chain conveyor is being sold by Bollegraaf Recycling Solutions and is offered in combination with an extra-strong pre-press for large cardboard boxes and octabins. The chain conveyor is of the type Bollegraaf HBT 2250/2000. The corresponding extra-strong pre-press for large cardboard boxes and octabins is also equipped with a so-called wirbulator. Technical specifications chain belt conveyor: Manufacturer: Bollegraaf Type: HBT 2250/2000 Year of construction: 2008 Drive power: 7.5 kW Length of feed belt: 8,300 mm Length of inclined belt: 19,250 mm Length of swan neck: 2,400 mm Inclination angle: 30° Effective width: 1,960 mm Feed belt sidewall height: 500 mm Hnodpfoyu Stkox Ap Hsn Inclined belt sidewall height: 800 mm Weight: 16 t

Condition: good (used), Warming cabinet, plate warmer, stainless steel warming cabinet -Manufacturer: GGG Gastro Großküchentechnik, stainless steel warming cabinet -Interior dimensions: 1225/620/H580 mm with adjustable intermediate shelf Hedpsyvquqofx Ap Henn -Temperature range: 30°C and 90°C, continuously adjustable -Dimensions: 1400/730/H850 mm -Weight: 72 kg

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t Hnjdpfob N Evmjx Ap Hsn working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Year of construction: 1990, condition: used, pression: 250 t working width: 3550 mm clear support width: 3050 mm support throat: 300 mm rear stop: ja mm electrical connection: 400 V, ca. 26 kW weight: 20 t Hnodj Dqaqepfx Ap Hen space needed: 2100 x 3800 x 3100 mm

Condition: used, Year of construction: 1995, sheet width 6000 mm plate thickness 6 mm Hnedpfx Apjyutt Es Hsn distance between columns 610 mm Control Elgo 87 P2 total power requirement 15 kW weight of the machine ca. 22 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg Hnedpfeb Rk Ekex Ap Hjn - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

Condition: used, Year of construction: 1986, machine/vehicle number: 200485, Lg.no. 24243 Technical data: Hedpfxstqmvze Ap Honn - max. working length 4050 mm - upright clearance 3050 mm - max. pressing force 110 t - ram stroke 200 mm - throat 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t - with: - CYBELEC ModEva 10 S control unit renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: - Mot. backgauge 5 - 1000 mm - front support arms - split pointing tool, - universal die