Used Einlagegitter Insert Grid for sale (3,067)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, C4 inserting machine Octoplus 4500, 6 stations (4 grippers + 2 friction feeders). Completely overhauled in 2022. Suitable for block thickness up to 20 mm. Price on request. Hedpfx Aboypgi Aj Nefg

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Hodpju Rwa Ijfx Ab Nsfg Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, 2-axis removal machine, inserter, servo robot, workpiece gripper, pick-and-place machine, removal robot Removal device, handling device for presses, lathes, etc. GETECHA Type GL-20S No. 13836 Year of manufacture 10/2003 Z-axis travel 1900 mm Travel distance Y-axis 250 mm Travel speed Z-axis max. 1100 mm/sec. Travel speed Y-axis max. 227 mm/sec. infinitely variable travel speed in Y- and Z-axis via SMB servomotors - precise axis movement via linear guides - epis control system - Control panel opposite Hfsdpfx Aboharwye Nog - Control for conveyor belt, gripper magnets, bead breaker cylinder, vacuum, gripper - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic - Mounted gripper with 3 lifting magnets, 3 pneumatic push-off cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours 25998 hrs. The system was used as an inserter/removal device on a press. Space requirement L x W x H 2900 x 1800 x 2000 mm Weight approx. 800 kg good condition

Condition: good (used), functionality: fully functional, For sale: 1 pair of used Leuze light grids MLD 535-RT2 M and mirror MLD 510-RT2 L Hfsdpfx Absyl S E Ue Neg

Condition: like new (used), NNP Pneumatic grid cutter Stainless pneumatic cutter, ideal for fruit and veg, mobile frame Hfodjhpqwhjpfx Ab Njg

Condition: used, Manual Socket Inserter Hfsdpouxt Ahjfx Ab Neg

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Manufacturer: Budde Condition: used Hedpsmxf Uvsfx Ab Nsfg drive type: motorized -king shaft total length outside: ca. 1500 mm total length inside: ca. 1850 mm total width incl. motor: ca. 900 mm total width without motor: ca. 560 mm conveying width: approx. 540 mm Material: steel, plastic Color: light gray Including feet (height adjustable) and motor gear (north 0.55 KW) Discharger/ Infeed/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 45° 610-550 with inclined inlet 45° RA1279 The Gebhardt roller curve is from 2007 and in a good (used) condition. It has an engine of the brand SEW. Supports and side guides are not included in the scope of delivery. These are optionally available. Technical data: Hfodpfsk Aa Rrox Ab Neg Manufacturer: Gebhardt Type: 314.01 Position: 010.05.1 Built: 2007 Condition: very good (used) Engine: fully functional Angle: 45° Nominal/outer width (NB):610mm Usable width (NUB): 550 mm Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2.00/1.15 Funding speed: 0.35 m/sec Drive: Head drive Rolls: Type: G6/50 sliding bearing with conical plastic molded part Weight: 45 kg Scope of delivery: without supports and side guide (if necessary please enquiries) Optional Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2005, condition: used, Book mark inserting machine Hsdpfx Absyid Rbo Nofg Sigloch LEH 1 Year: 2005 Description: - Right hand infeed - Scissor - Delivery to the left Book block format (max): 350 x 240 x 70 mm Book block format (min): 10 x 65 x 3 mm Max. mechanical speed: 20 mtr/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), Frama Inserting Machine, Type DI380 Hedpfx Abjyir Hts Nofg Processes 3000 pieces/hour (folding and inserting) Folding types: C-fold, Z-fold, single-fold, double-fold Sealing: Yes Paper input capacity: 325 Insert input capacity: 100 Envelope input capacity: 100

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003497 - Manufacturer Code: 2-083-01-0116 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service. Please contact us. Hjdoymd Udepfx Ab Njfg

Condition: excellent (used), The Rational CombiMaster Plus CM 61 is a premium electric combi oven built for professional kitchens demanding performance, precision, and durability. Renowned for its reliability and control. This unit delivers consistent cooking results across steaming, roasting, baking, and combination modes, all within a compact and efficient footprint. Key Features Manufacturer: Rational Model: CombiMaster Plus CM 61 Type: 6-Grid Electric Combi Oven Capacity: 6 × 1/1 GN trays Construction: Full stainless-steel body and chamber Control type: Manual rotary dials with digital temperature and timer displays Cooking modes: Steaming (30°C – 130°C) Convection (30°C – 300°C) Combination (steam + convection) Integrated core temperature probe for accurate cooking control Automatic cleaning and rinse system Double-glazed door with heat-reflective glass for energy efficiency Integrated drain and water inlet system Mounted on stainless-steel Rational stand with GN tray runners Specifications Power: Electric, 3-phase Tray capacity: 6 × 1/1 GN Temperature range: 30°C – 300°C Oven dimensions Height: 780 mm Width: 900 mm Depth: 770 mm Stand dimensions H: 700 mm W: 335 mm D: 285 mm Hjdjxph H Uepfx Ab Nofg Condition Used – good condition Fully tested and operational Clean stainless-steel finish inside and out Supplied with matching Rational stand Item does not come with documentation for sale within EU.

Condition: good (used), total length: 13,000 mm, total height: 2,500 mm, 13 linear meters shelf rack SSI Schäfer R3000 incl. mesh shelves Used equipment, very good condition, see pictures Height: 2.5 m Depth: 80 cm Mesh length: 1.28 m Load capacity/shelf: 250 kg Hjdpfxory Ucco Ab Nsfg Negotiable price: €1,790 net ex-stock Offer includes: + 11 pcs. pre-assembled frames, approx. 2.5 m high, 80 cm deep + 40 pcs. shelves, 800 mm deep, 1280 mm long, 250 kg load capacity + 3 pcs. cross bracing for 1280 mm shelves Goods in stock. Transport and assembly available on request. Inspection possible anytime by appointment. Further information available upon request. Constantly more than 5,000 linear meters of pallet racking from various manufacturers in stock. (Technical data, information, prices, and prior sale subject to change and error! See our terms and conditions, all prices excluding VAT ex-stock.)

Condition: good (used), total length: 60,000 mm, total height: 2,500 mm, 60 linear meters SSI Schäfer R3000 shelving system incl. mesh shelves Used equipment, very good condition, see photos Height: 2.5 m Depth: 80 cm Mesh shelf length: 1.28 m Load capacity/shelf: 250 kg Asking price: €8,490 net ex stock The offer includes: + 61 pre-assembled frames, approx. 2.5 m high, 80 cm deep + 240 shelves, 800 mm deep, 1280 mm long, 250 kg load capacity Hfodpfory Ucvjx Ab Njg + 20 cross braces for 1280 mm shelves Goods are in stock. Transport and installation available on request. Viewing possible at any time by appointment. Further information available on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to change and errors in technical data, specifications and prices as well as prior sale! Please see our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: used, Year of construction: 2023, 2 units available - vintage 2018 and 2023. Working condition! Possible to purchase also feeders! Hedpfxoykvqfj Ab Njfg

Condition: excellent (used), End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool Hedpeyhcg Uofx Ab Njfg -Diameter: 80 mm -Milling height: 75 mm -Recording: SK50 -Manufacturer: Hoffmann -Type: KRE80-321 -Order No.: 229.810.00 -Weight: 7.8 kg

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 80 mm Hedjcwb Nfopfx Ab Nofg -Milling height: 75 mm -Adjustment: SK50 -Manufacturer: WIDIA -Type: 06306 Widax M30 -Number: 3x milling cutters available -Price: per piece -Dimensions: 224/100/H100 mm -Weight: 5.6 kg

Condition: ready for operation (used), Year of construction: 2001, Four loading units Pavan for lasagna sheets in industrial production lines are available. Capacity: approx. 250 trays/h, format range: 200mm/150mm, machine dimensions X/Y/Z: approx. 1800mm/850mm/1650mm, weight: approx. 325kg. An on-site inspection is possible. Hedoxl El Hepfx Ab Njfg

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Hodpfxoh Nypfs Ab Nefg

Condition: good (used), Year of construction: 2007, KERN 2500 inserting machines for handling C5 and C6/5 envelopes. The set consists of a complete working line and a second set of this type of machine for parts. Hfedpfx Abewfglws Nsg Year of production: 2007 + set of machines for parts from 2004. List of modules: - automated input module (single A4 sheets) ensures efficient paper feeding. - control module reading, grouping and folding (Grouping and Folding Station – GUF). - 2 modules for adding leaflets, each equipped with 2 feeders. - inserting module - envelope feeder and sealer module with a panel for handling applications and settings. - final conveyor belt with containers for incorrect enveloping. Both sets were used in one company. The first set was installed in 2004 and the second in 2007. The machines were used until 2020, when the company purchased new machines. At that time, the machines were renovated using components from the second set. Since 2020, the renovated machines have been used sporadically and the second set of machines was used for parts. .

Condition: good (used), The scope of delivery includes: 1x used grating Material color: hot-dip galvanized Total depth: approx. 1,110 mm (support bar direction) Total width: approx. 1,130 mm (cross bar direction) Support bar: TS30/2.00 Frame height: approx. 30 mm Mesh width: approx. 35 x 40 mm Weight per piece: approx. 22.18 kg Internal designation: GR-125 Note: - The grating may have damage, scratches, dents, and welds. Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Hedjwmb Aaspfx Ab Nefg Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: Hfedpfx Abowl U S Ss Njg 1x welded grating, used Material color: hot-dip galvanized Total depth: approx. 2,460 mm (support bar direction) Total width: approx. 1,130 mm (cross bar direction) Support bar: TS30/2.00 Frame height: approx. 30 mm Mesh width: approx. 35 x 40 mm Weight per piece: approx. 49.61 kg Internal designation: GR-126 Note: - 2 L-bracket welded on each side for locking - The grating may have damage, scratches, and dents. Your contact person in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) Hfsdpsyhqa Aofx Ab Nsg A) Motorized Roller table "RBO" with 90° conveyoring belts B) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) C) Connection system, with up-side-down turning machine (180°) "RBO" Mod. Ribaltatore D) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units (1 left+1 right) with 4x BH18 heads with 18 spindles each (36 right + 36 left) total 72 slot A: No. 2 vertical Electro-spindles ISO 30 (Kw 4.5 each) with 2 tool-holder stores 3 places each (tot. 6) slot B: No. 2 predispositions for the installation of other 2 electro-spindles No. 4 upper drilling units (4x32 = total 128 vertical spindles + 4x4= tot. 16 horizontal spindles in Y-axis) No. 2 drilling spindles stores/magazines (revolver) with 60 positions each (total 120) E) "BIESSE" RD dowels insertion machine No.2 horizontal units (1 right+1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles F) Brush-cleaning machine "WANDRES"

Condition: used, Year of construction: 1992, Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200Year 1992 - Serial-No. H-200 Hjdpsh Ax Snofx Ab Nofg 2 Feeder for CMC Inserting Machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1979, machine/vehicle number: 4015, Spiraleindrehmaschine - Spiral insertion machine Renz DPSTYear 1979 - Serial-No. 4015 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Hfodpeh Axnysfx Ab Nog On Stock Emskirchen / Nürnberg - Can be test