Used Electromagnet for sale (339)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: Gbodpfx Afsz Ipdcsusu All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity: 25,000 l/h. Year of manufacture: 2014 Equipped with 2 density meters, 4 electromagnetic flowmeters, and 3 flow control valves for measuring and controlling the fat content in milk and cream. - Including original documentation. - Can be operated via Profibus central system - Can run stand-alone with SCADA system Sattline; we are currently working on integrating a control screen in the control panel to make stand-alone operation easier. Gbodpfx Afewf Iq Usuou - Excellent condition.

Condition: new, Year of construction: 2026, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,600 mm, feed length X-axis: 560 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 200 kg, grinding height: 400 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 1 m/min, grinding wheel diameter: 200 mm, distance table to spindle center: 450 mm, table speed: 25,000 mm/min, table length: 520 mm, table load: 200 kg, type of input current: three-phase, table width: 250 mm, grinding wheel width: 20 mm, spindle speed (max.): 2,850 rpm, spindle speed (min.): 2,850 rpm, overall weight: 950 kg, distance stand to spindle center: 300 mm, table height: 700 mm, grinding spindle motor power: 1,500 W, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 1 m/min, travel distance X-axis: 560 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rotational speed (min.): 2,850 rpm, grinding spindle speed: 2,850 rpm, distance table to quill: 450 mm, warranty duration: 12 months, grinding wheel speed: 2,850 rpm, input voltage: 400 V, disc diameter: 200 mm, control cabinet length: 600 mm, control cabinet width: 400 mm, control cabinet height: 1,200 mm, space requirement height: 2,500 mm, space requirement length: 3,000 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, Special Offer – 5% Discount Available! SURFACE GRINDING MACHINE SGA-2550AHD WITH PLC CONTROL The SGA-2550AHD Surface Grinding Machine is a professional machine designed for precision grinding of flat surfaces in tool rooms, production facilities, and metalworking workshops. Equipped with a modern PLC control system, an electromagnetic chuck, and high-quality components, it delivers outstanding grinding accuracy, excellent repeatability, and reliable performance. Its rigid machine construction minimizes vibration, ensuring exceptional surface finish quality and long-term stability. The SGA-2550AHD is ideal for machining tool steel, structural steel, cast iron, and other materials requiring precision surface grinding. Main Features • PLC control system • Electromagnetic chuck • High grinding accuracy and repeatability • Heavy-duty machine construction • Professional coolant system • Simple operation and programming • Excellent surface finish • CE certified Precision Grinding The machine is equipped with a 250 × 520 mm working table and a 250 × 500 mm electromagnetic chuck, providing secure workpiece clamping and high machining precision for both single-piece and production work. PLC Control System The integrated PLC control system enables quick parameter adjustment, improves productivity, and ensures consistent machining quality. It is suitable for both individual jobs and serial production. Standard Equipment • Coolant tank • Electromagnetic chuck • Balancing arbor • Wheel flange • Wheel extractor • Leveling wedges and bolts • Tool box with service tools • Standard grinding wheel • Working lamp • Wheel dresser stand Included Optional Equipment • Full machine enclosure • Magnetic separator • Dust collection system • 2-axis digital readout (DRO) • Built-in electromagnetic chuck controller • Wheel balancing stand • Diamond dresser Technical Specifications • Model: SGA-2550AHD • Working table size: 250 × 520 mm • Electromagnetic chuck: 250 × 500 mm • Control system: PLC Applications Gbodpozd U Eysfx Afusu • Tool rooms • Manufacturing plants • Metalworking workshops • Tool steel grinding • Structural steel machining • Cast iron machining • Precision engineering and component production Safety The machine is equipped with all required safety systems in accordance with European standards. The robust construction, protective guards, and CE certification ensure safe, reliable, and long-lasting operation. Transport & Delivery We offer professional transport and delivery throughout Europe using specialized heavy machinery logistics. Every machine is carefully loaded, securely protected, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping outside Europe is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery, supplying high-quality equipment to customers throughout Europe. We provide expert technical advice, machine configuration, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Gbedpsz E A Nmsfx Afusu Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: used, This listing is introducing 8 No Envair Mobile Isolators of different specifications currently held in our stock The units are in full working condition and ready for immediate use Envair Mobile Isolator Envair Technology is a UK-based manufacturer specializing in clean air and containment solutions for the healthcare, biotechnology, and pharmaceutical industries. Their product range includes a variety of isolators designed to provide controlled environments for handling hazardous substances, ensuring both operator and product safety. Applications Envair isolators are widely used in a variety of applications including Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage developmen Key Features of Envair Isolators Positive and Negative Pressure Models: Envair offers both positive pressure isolators protect the product from contamination and negative pressure isolators to protect the operator from hazardous substances Compliance with GMP Standards: Many Envair isolators meet EU GMP Grade A and ISO 5 classifications, ensuring sterile, controlled environments. Customizable Designs: Envair provides bespoke solutions tailored to specific client needs, including unique dimensions and technical requirements. Advanced Containment Technology: Isolators are equipped with automated pressure decay leak tests, electromagnetic interlocks for transfer chambers, and integrated decontamination systems. User-Friendly Controls: Most units include intuitive touchscreen interfaces and PLC-based systems for simple and efficient operation. Growing Need for Containment with HPAPIs Demand for personalised medicines containing High Potent Active Pharmaceutical Ingredients (HPAPIs)—particularly in newer super-potent oncology, cardiovascular, and diabetes treatments—is increasing rapidly. These medicines often require shorter turnaround times, forcing pharmaceutical process manufacturers to develop faster, more agile workflows. In such high-risk, high-value settings, a GMP-compliant environment is not optional—it’s critical. It’s easy to overlook the fact that the people developing, manufacturing, and dispensing these complex drugs are at risk of exposure to harmful, sometimes lethal, compounds. Their safety is paramount, given the essential role they play in maintaining a reliable supply of advanced therapeutics. Expertise in HPAPI Handling for CMOs & CDMOs Envair has specialist expertise in helping Contract Manufacturing Organisations (CMOs) and Contract Development and Manufacturing Organisations (CDMOs) safely handle HPAPIs—even within existing non-contained facilities. Their isolator systems are designed, manufactured, and installed to meet rigorous containment performance levels below 1μg/m³ (OEB 5). Each system is custom-engineered for the specific site and process step—whether it’s weighing, mixing, milling, spray drying, or packaging. Applications Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage development Gbjdpsxv Dhbsfx Afuou

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Gbedpfxez Indus Afueu Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: used, Year of construction: 2025, New demonstration machine! Price on request! The CONTROL has always defined its own class – the premium class for vertical panel saws. But even this leading position doesn't stand still. We have developed the CONTROL into the premium class's vertical cutting center, with increased automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and the new machine software ensure improved ease of operation in every detail. Saw frame: • Machine components manufactured to a precision of 1/100 mm • Solid, self-supporting, firmly welded, and torsion-resistant saw frame • Full-surface support table made of birch plywood with integrated small parts support • Auxiliary fence profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller locking during the sawing process Saw beam: • Stable, durable saw beam steel construction • Automatic saw beam locking with cutting interface detection Saw unit: • Backlash-free, smooth-running guides • Robust mounting of the motor carriage ensures high cutting accuracy • Powerful, high-torque 5.5 kW motor (7.5 HP) • More comfort thanks to largely automated operation • Laser-assisted display of the horizontal cut • Automatic motor carriage clamping • Automatic lowering and pivoting of the saw motor • Pneumatic clutch for easy switching to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control: • 12" touchscreen computer with optimal user guidance • Multilingual user guidance • Tool database guarantees high flexibility and absolute repeatability • Fully automatic sawing process • Infinitely variable feed speeds 10-25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hour counter • Network connection • UPS 24VDC for touch PC (uninterruptible power supply) Dimension setting: • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Mounting: • Wall or free-standing mounting possible Saw blade: 300 mm, scoring saw, 60 teeth Cutting range: L: 5300 x Hvert: 2240 / Hhor: 2100 x T: 80 mm, consisting of: 1.00 Cutting interface distance vertical 1000 mm 1.00 Language documentation DE 1.00 Saw motor 1-phase, 400V, 50Hz, EVO/CON 1.00 Feed speed 10-25 m/min 1.00 Scoring saw unit VSA (scoring saw infinitely adjustable) 4.00 Free-standing support, complete 1.00 Small parts support, aluminum, complete (2-part) 1.00 STRIEBIG ExpertCut CON consisting of: - Electronic positioning system EPS-X - Automatic saw beam positioning ASP - User guidance with STRIEBIG ExpertCut software license for 1 office workstation (network license) - Label printer - Network connection - Operating manual - Paper holder 1.00 UPS 24VDC for touch PC (uninterruptible power supply) 1.00 Block parts, initial license 1.00 Service: data import / label layout (remote) 1.00 Basic training STRIEBIG cutting optimization (online training) Gjdezx E T Dopfx Afuebu Storage location: Rieth

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Gbjdpox N I Aljfx Afuju Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: good (used), Year of construction: 2000, bore capacity in steel (diameter) 32.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 160 mm 4 speeds 65 - 2000 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features: - Robust column drill press (V-belt drive) - Electromagnetic feed clutch = spindle feed * with overload protection and electric cross-handle control - mushroom-head pushbutton (latching) for EMERGENCY STOP * located on the front panel - continuously variable speed control - clockwise rotation of the drill spindle - Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable - Separate coolant system, with reservoir - Operating instructions in German Gbjdpszzrfxjfx Afueu

Condition: good (used), Year of construction: 1994, For sale OERLIKON MATTISON R.P. 5 Vertical Surface Grinding Machine with Magnetic Circular Table – Ø 1100 mm – 45 kW Gbodpfxezpzyne Afuou Description: For sale, a vertical surface grinding machine with a vertical spindle and rotary table, manufactured by OERLIKON MATTISON, model R.P. 5. This is a very powerful and robust machine, ideal for quickly grinding large series, as well as for grinding flat surfaces, discs, blades, large rings, or large mechanical parts. Technical specifications: Brand: OERLIKON MATTISON Model: R.P. 5 Diameter of the magnetic circular table: ~1,100 mm (measured with a meter) Spindle power / main motor power: 44 / 45 kW (60 HP) Motor speed: 750 rpm Motor: SELIN Genova (380 V / 50 Hz / 87 A) Included equipment: Large, recessed electromagnetic circular table Separate electrical cabinet (380 V) Paper filter system / coolant separator with belt conveyor Segment grinding wheel head Control panel on the front

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving Gedpfsz N Sd Nsx Afujbu – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom. Gbedpjz N Sgdofx Afuou

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,550 mm, total width: 2,250 mm, total height: 2,530 mm, overall weight: 5,200 kg, Special Offer – 5% Discount Available! Surface Grinding Machine SGC512AHD – Moving Column Type The MTP SGC512AHD Surface Grinding Machine is a heavy-duty precision grinder designed for machining large flat surfaces in tool rooms, production facilities, and metalworking workshops. Its moving column design, rigid cast-iron construction, and Mitsubishi PLC touchscreen control ensure high accuracy, excellent stability, and reliable performance. Hardened and precision-ground guideways with Durcite-B coated sliding surfaces reduce friction and provide smooth, accurate movement. The hydraulic table drive guarantees stable operation, while the precision spindle produces an excellent surface finish. Main Features • Mitsubishi PLC touchscreen control • Electronic handwheel • Moving column construction • Hardened and ground guideways • Durcite-B guideway coating • High grinding accuracy • Hydraulic table drive • Heavy-duty cast-iron construction • CE certified Standard Equipment • PLC touchscreen control • Electronic handwheel • Grinding wheel • Wheel flange • LED work light • Electromagnetic chuck • Balancing stand • Balancing arbor • Safety guards • Demagnetizer • Coolant system • Diamond dresser • Machine feet • Central lubrication • Tool kit Included Equipment • Magnetic separator with paper filter • Full machine enclosure • Parallel dressing device • Dust extraction system • 2-axis digital readout (DRO) • Integrated magnetic chuck controller • 6 kW frequency inverter • Diamond dresser • Additional wheel flange Technical Specifications • Model: SGC512AHD • Brand: MTP • Table size: 500 × 1200 mm • Magnetic chuck: 500 × 1200 mm • Longitudinal travel: 1140 mm • Cross travel: 540 mm • Maximum spindle-to-table distance: 570 mm • Maximum workpiece weight: 800 kg • Grinding wheel: 350 × 20–40 × 127 mm • Hydraulic table speed: 5–25 m/min • Spindle motor: 5.5 kW • Spindle speed: 1440 rpm • Hydraulic motor: 2.2 kW • Vertical feed motor: 0.75 kW • Machine dimensions: 3550 × 2250 × 2530 mm • Machine weight: approx. 5200 kg Applications • Tool rooms • Manufacturing plants • Metalworking workshops • Precision grinding of tool steel, structural steel and cast iron • Production of precision machine components Transport & Delivery We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected for transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Gedpey Hr Uysfx Afuebu Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide technical advice, spare parts, and comprehensive after-sales support. Contact us for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: used, mileage: 95,000 km, Year of construction: 2019, Three-axle truck, 26-ton GVWR, 4200 mm wheelbase, equipped with a Mazzocchia MAC2NB series compactor, 11,000 kg payload capacity, ZF manual transmission, Telma electromagnetic retarder, onboard weighing system, rear-view camera, Euro 6 compliant. Gjdsww Ipuepfx Afuebu Please note that the vehicle description is indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the accuracy of the data.

Condition: excellent (used), Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven When highly diverse products or product components with equally diverse dwell times need to be processed independently in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven Data Manufacturer: Sat Gjdpfeim Ik Sox Afuebu Model: B 2599 A Type: 1000T Type: Drawer Oven External Dimensions of the Oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable Volume in Each Drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum Operating Temperature: 130 °C Temperature homogeneity in the usable volume, under stabilized conditions: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel framework, on which the outer cladding made of unalloyed steel is mounted and painted in RAL 1013 (pearl white). The oven's inner casing is made of aluminized steel sheet. Insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of rock wool. Floor: Like the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable load height of 120 mm. Maintenance Doors: 2-wing maintenance door on the back of the oven. Secured with screws. This door provides complete access to the interior of the oven. Part Handling: Parts are handled via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a sealing strip on the drawer bottom to reduce heat loss when opened. Each drawer has a usable load capacity of 120 kg with load distribution over the entire surface. Peak loads of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured by electromagnets and controlled by the Siemens system. A timer is provided in the control cabinet to control the minimum preheating time for each drawer. A timer is provided in the control cabinet to control the maximum preheating time for each drawer. A temperature indicator is provided for each drawer. These indicators will be located on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Circulation capacity: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Rotating Device Gunter Seibold Rotating Device for HTS Coils – Steplessly Adjustable Drive (Type S05082) Description: Professional rotating device designed for accommodating and rotating HTS coils with a winding core. Developed to ensure even distribution of two-component resin during the curing process. Ideal for development, laboratory, or manufacturing environments working with high-temperature superconductor coils. The winding form is electrically heated, with power supplied directly to the form (not included in the scope of delivery). The machine stands out for its precise control, user-friendly operation, and maintenance-friendly design. Technical Features Solid Machine Base: Welded square tube construction with leveling screws and floor anchors Drive: Three-phase planetary gear motor (11 kW, 400 V, 50 Hz, 3 phases) Steplessly adjustable speed (0.2 – 100 min⁻¹) Soft-start & soft-stop via frequency inverter (4-quadrant controller) Electromagnetic spring-applied brake (safe stop in case of power failure) Selectable clockwise/counterclockwise rotation Gbedpfx Afozil R Rouju Control Panel: 5.7" touch panel for configuring speed, direction, ramps, time, or total rotations Emergency stop button, ergonomically integrated 2 programmable analog inputs Electrics & Control Cabinet: Control system integrated in the machine base 400 V / 230 V supply, 24 V DC control voltage Circuit breakers, RCD 30 mA Sockets: 8× 230 V / 16 A, 2× 400 V / 16 A CEE, 1× 400 V / 32 A CEE Control cabinet with climate control unit Complete grounding & static discharge of the main shaft Adjustable workplace lamp, tiltable and height-adjustable Specifications Feature / Value Max. coil diameter: 1,500 mm Coil passage: 1,700 mm Center height above floor: 1,100 mm Max. load on faceplate: 500 kg Faceplate Ø 600 mm, 4 T-slots (DIN 650) Speed range: 0.2 – 100 min⁻¹ (stepless) Torque: 775 – 539 Nm Operating voltage: 400 V / 50 Hz Control voltage: 24 V DC Connected load: 11 kW Connection current: 32 A Color scheme (according to RAL): Base machine: Blue (RAL 5010) Moving parts: Yellow (RAL 1021) Control panel / cabinet: Light grey (RAL 7035 / 5010) Weight: approx. 1,800–2,000 kg Condition: used Scope of delivery: (see picture) (Subject to change and error in the technical data and information!) We are happy to answer further questions for you by phone.

Condition: excellent (used), Condition: Very good condition with relatively low usage. The machine was used in a correctional facility and was rarely operated. Metallkraft precision surface grinding machine FSM 2550 Robust surface grinding machine with CNC-controlled vertical feed and electromagnetic clamping plate for precision surface grinding operations. Gbodpfoz Hly Rox Afuju Grinding table clamping area (L x W): 500 x 250 mm Distance spindle / table: max. 500 mm Workpiece weight: max. 190 kg Feed rate X-axis: 5 - 25 m/min Spindle speed: 2,900 min-1 Grinding wheel (D/dxB): Ø 180 / 31.75 x 13 mm Connection voltage: 400V / 50Hz Motor power spindle: 1.5 kW Motor power hydraulic pump: 0.75 kW Footprint: 2,250 x 1,400 mm Dimensions (L x W x H): 2340 x 1500 x 1800 mm Weight (net): approx. 1,385 kg

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be Gbodpfjz E Ilmox Afuju of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: as good as new (ex-display), functionality: fully functional, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 300 mm, total length: 6,689 mm, total width: 1,766 mm, total height: 3,055 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Further technical data Vertical cutting height: 2,150 mm / 2,150 mm (with lowering function) Horizontal cutting height: 2,100 mm Width: 1,766 mm (free-standing) / 1,383 mm (wall-mounted) Cutting length: 5,300 mm / 3,000 mm / 5,000 mm (with lowering function) Saw frame Self-supporting, torsion-resistant, welded frame with latticework reinforcement on 4 solid machine feet Automatically deflecting timber support wall TRK1 with integrated small parts timber shelf Panel lowering device (PAV) with 2 panel lowering units for board materials up to max. 160 kg (80 kg per unit) Length stop profile above central support up to zero cut position Continuous length stop profile above roller support with flip stop Precise 17-fold roller support, pneumatically braked Swivelling central support along the entire length, support grid made of aluminum with plastic pads Unit for wall mounting Aluminum small parts support (1 pair), can be used individually Saw beam & saw unit Stable, durable saw beam with double locking Gsdpfx Aexazapsfujbu Robustly mounted motor carriage for high cutting precision Pneumatic clamping of the motor carriage Powerful, high-torque saw motor 5.5 kW (7.5 HP) Integrated, high-performance TRK dust extraction system for external extraction unit Supersilent sound insulation Electromagnetic motor brake Paper holder Control Clear push-button control for easy operation Positioning of the panel lowering device via two-hand control User guidance via status LED indicators on panel lowering units Operating hours counter Dimension adjustment Programmable cam switch for recurring dimensions Laser-guided display of horizontal cuts Digital measurement system DMS-Y, including motorized fine adjustment Digital measurement system DMS-X, including manual fine adjustment, installation selectable above central or roller support Optional equipment 006 Striebig free-standing base support 103 Digital measurement system DMS, X-axis 104 Digital measurement system DMS, Y-axis 105 Additional digital measurement system DMS, X-axis 200 Pro Lock Easy-Fix tool clamping system at the saw blade 201 Scoring saw unit VSA 300 Additional panel lowering unit 401 Complete aluminum small parts support Including delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section Gbsdpjzka T Ajfx Afuju • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control

Condition: good (used), Year of construction: 2004, type of input current: three-phase, input voltage: 380 V, turntable diameter: 1,650 mm, Used pallet wrapping machine Brand: SIAT Model: SW2L Gedpfx Afoz Ndqtjuebu Year: 2004 Three-phase 380V The SIAT SW2 is one of the most recognized semi-automatic rotary table pallet wrapping machines on the industrial market, manufactured by the Italian multinational SIAT (Maillis Group). It is a robust machine designed for intensive use in logistics and warehouses. Main Technical Features: - Load capacity: Accepts pallets weighing up to 2,000 kg. - Pallet dimensions: Standard rotary table diameter: 1650 mm - Maximum packaging height: 2100 mm - Reel carriage systems (depending on version): M / FM: With mechanical or electromagnetic brake to regulate film tension. PW: With motorized pre-stretch (up to 200%–300%), which significantly optimizes stretch film consumption. - Control and programming panel: Digital screen or PLC panel with the ability to save up to 10 wrapping programs. - Speed regulation of the table and carriage by frequency inverter. - Independent configuration of top, bottom, and reinforcement wraps. - Automatic height detection by means of a photocell. - Safety and transport: Progressive start/stop, stopping in the exact position, anti-entrapment safety sensor under the film carriage, and tilting column to facilitate transport. Includes: - Complete perimeter installation with masts, rails, and barriers. - All rolls of stretch film and packaging covers that you can see in the photographs.

Condition: excellent (used), functionality: fully functional, grinding length: 1,200 mm, Hidroprecis Tangential Grinding Machine model RSPB 1200, machine with electromagnetic chuck of 1200x 500mm, table stroke 1350mm, grindable surface 1200 x 600mm, maximum grindable height 575mm cross stroke 550mm, useful table support plane 1200 x 400mm, magnetic chuck height 110mm, grinding wheel motor power 10hp 1500rpm, grinding wheel diameter 400 x 127 x 50mm -400x127x100mm, machine with diamond dresser, machine in good condition, estimated weight 5500kg Gbodev Rnivopfx Afuou

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS Gedpfjxuwanjx Afuobu A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Gsdpfeyr Awbex Afuobu Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: used, Year of construction: 2020, Overview The tangential filter was manufactured in 2020 by Spanish manufacturer Sefiltra. It can be visited anytime. The structure is made of AISI-304 stainless steel; it has four wheels and a handle for its wheels and a handle for its displacement. All pipes and accessories are made of AISI-316L, Stainless Steel AISI-316L. The system is operated from the SIEMENS KTP 900 color touch screen, which is located on the front of the electrical panel. Techn. Details Capacity: depending on beer type, recently 1,000 – 1,500 litres per hour Unitary filtration surface: 10 m² Two 0.5 micron hollow fiber membranes Dimensions (LxlXh): 1.800 x 950 x 2.300 mm Weight empty: 350 Kg Operating weight: 470 Kg Equipment 1 pc Centrifugal feed pump 3.0 kW 1 pc Recirculation centrifugal pump 4,0 kW 2 pc Diaphragm HF 6043 MF 05 (KDP3358) 1 pc Modulating valve 5 pcs Pneumatic valves 1 pc 100 L CIP tank 1 pc Angle filter 500 microns 3 pc Electromagnetic flowmeters 5 pc Pressure transmitters 1 pc Temperature transmitter 1 pc Level transmitter 1 pc Liquid detector 1 pc Electrical panel with Siemens S7-1200 programmable logic controller and touch screen Siemens 7" touch screen Gbsdpoqvvpasfx Afuou