Used Electronic Modules Et 200S for sale (28,195)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Kdsdpfx Aisy Hkd Hj Rjr Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Kdodpszf Hi Hefx Ai Rer Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: used, Available quantity: 4 units Ksdpfxozg Ig Ne Ai Rjdr “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: Siemens Type: SINAMICS G120D Power Module PM250D (6SL3525-0PE21-5AA1) Power: 1.5 kW, 3-phase, 380–480 V AC Rated current: approx. 3.8 A (output approx. 4.1 A, maximum approx. 8.2 A during overload) Protection class: IP65 (without control unit) Special features: Integrated Class A network filter, energy feedback (regenerative braking capability), high overload capacity (200% for 3 s, 150% for 60 s, 100% for 300 s) Weight: approx. 5.7 kg including control unit 6SL3544-0FB21-1FA0

Condition: excellent (used), CTS TSS-70/130 Temperature Shock Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Machine Type: Temperature Shock Testing Chamber / Temperature Testing Chamber Test Volume: approx. 130 liters For sale is a used temperature shock testing chamber from the manufacturer CTS. The system is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, quality assurance, and research and development. Technical Data Hot Chamber: +50 °C to +200 °C Cold Chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Cycle time: < 10 seconds Temperature adjustment rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min Cooling rate: approx. 4 K/min Temperature deviation over time: ±1 K Temperature deviation spatially: ±2 K External dimensions approx.: 2335 x 940 x 1820 mm (W x D x H) Loading dimensions approx.: 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions approx.: 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight approx.: 950 kg Power connection: 400 V 3/N / 50 Hz Power consumption: approx. 16.6 kW Rated current: approx. 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant Pre-cooling Stage: R404A, 4.0 kg Refrigerant Cooling Stage: R23, 0.6 kg / 10 bar Operating overpressure PS: 25 bar Operating Requirements Water-cooled design Cooling water connection required Compressed air connection required Operation possible only with cooling water and compressed air Cooling water inlet: 3 - 6 bar Equipment CTS Control Panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Trolley with lead screw drive Test chamber / trolley made of stainless steel Insert basket made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Kdodozf Ibkspfx Ai Rjr Scope of Supply 1x CTS TSS-70/130 Temperature Shock Testing Chamber Insert basket / test chamber equipment Existing documentation / files Operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures The device can be switched on Scope of supply as shown in the pictures. Subject to changes and errors in the technical data, as well as prior sale.

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC JTR-H hot water unit 140°C, steam 140°C/32 bar and high-pressure steam 150°C/200 bar (only with the 350 bar version). Trailer similar, but not a Dynajet, Oertzen, Falch, DIBO, etc. - Single-axle trailer with a hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, tail lights and reflectors, towing hitch for 50 mm coupling, 13" tires and ABS. Kjdefdvkzopfx Ai Redr The following hot water models are available: JTR-H 21/200 | 21 l/min. at 200 bar | Engine: Kohler KDW 702, 12.6 kW JTR-H 23/350 | 23 l/min. at 350 bar | Engine: Kohler KDW 1404, 26 kW JTR-H 20/500 | 20 l/min. at 500 bar | Engine: Kohler KDW 1404, 26 kW JTR-H 30/500 | 30 l/min. at 500 bar | Engine: Kohler KDW 2204, 37.5 kW - Dimensions: 3,370 x 1,640 x 1,540 - Unladen weight: approx. 650 kg - High-pressure pump: Comet RW/TW Premium - HD hose reel: manual with max. 30 m of 1/2" or 100 m of 3/8" hose (included) - Water supply hose reel: manual with 50 m of 3/4" hose - Water tank: 600 l - Diesel tank: 75 l - Anti-limescale pump with tank - 75 kW heating module - Options and accessories available upon request

Condition: good (used), functionality: fully functional, Siemens SINAMICS G120D Power Module 6SL3525-0PE17-5AA1 with Control Unit “Function tested; item comes from the dismantling of a production line of an automotive supplier.” Kedpfxoyq Sb Hs Ai Redr Manufacturer: Siemens Type: SINAMICS G120D Power Module PM250D (6SL3525-0PE17-5AA1) Power: 0.75 kW, 3-phase, 380–500 V AC Rated current: 2.2 A, max. 4.4 A Protection class: IP65 (without control unit) Special features: Integrated class-A line filter, capable of energy regeneration, high overload capacity (200% for 3 s, 150% for 60 s, 100% for 300 s) Weight: approx. 5.7 kg Including Control Unit 6SL3544-0FB20-1FA0

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Kdjdpfx Aswcyk Uei Rsr -Manufacturer: Siemens, Simodrive 611 I/R module INT. 36/47 kW -Type: 6SN1145-1BA02-0CA1 -Dimensions: 310/200/H480 mm -Weight: 15 kg

Condition: used, Quantity: 3 units Used industrial electronics module from Straschu Industrie Elektronik for control and communication applications. Manufacturer: Straschu Industrie Elektronik Model: PME02i-MOD Device type: Communication module Application area: Industrial automation Mounting type: Control cabinet mounting Condition: Used Kdedjzd Ratspfx Ai Rer

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2795, power of the servo motor: 750 W, input voltage: 230 V, pneumatic connection: 7 bar, For sale is a high-performance Brother automated sewing unit equipped with a JAM TC 762 F automation module, offered as a complete industrial workstation. This system is specifically designed for automated pocket setting and precision sewing operations, making it highly suitable for denim, trousers, and workwear production. The integrated automation module enables accurate material positioning, clamping, and repeatable stitching cycles with minimal operator input. The unit combines a heavy-duty Brother sewing head with JAM International automation technology, delivering consistent production quality and significantly improved efficiency compared to manual processes. The machine has been used in a professional garment factory environment and was fully operational until factory shutdown. The unit has also been video recorded in full working condition on 01.04.2026. Key advantages: • Automated pocket setting and J-stitching • High repeatability and production consistency • Reduced labor dependency • Suitable for continuous industrial production • Complete workstation ready for integration • Production Capacity: Approximately 2,600 pockets per 8-hour shift. • Maximum Speed: Operates at up to 3,600 RPM. • Quick-Change System: Features a pneumatic mold change system, allowing for fast transitions between different pocket sizes and styles. • Versatile Operation: Capable of both semi-automatic and fully automatic modes, handling both pre-ironed and unironed pockets. Includes: • Brother automated sewing machine head • JAM TC 762 F automation module (material handling and positioning) • Electronic control system (TC 762 interface) • External PC workstation (monitor, keyboard, control unit) • Pneumatic system with regulators • Dual foot pedal controls • Industrial table and heavy-duty frame • Safety guards and integrated lighting • Fabric support and output handling system Technical details: Kdjdpfxoy Inyhj Ai Rjr • Manufacturer: Brother Industries, Ltd. (Japan) • Automation module: JAM International TC 762 F (Italy) • Type: Programmable automated sewing workstation • Power: 220V • Pneumatic system required • Integrated control and external PC operation Condition: • Used industrial condition • Fully operational prior to factory shutdown • Video recorded in operation (05.03.2026) • Maintained and serviced, latest maintenance 27.02.2026 • Typical signs of use consistent with production environment • Sold as-is, where-is, without warranty Typical applications: • Automated pocket setting • Denim and trouser production • Workwear manufacturing • Reinforcement stitching • Repetitive precision sewing operations Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: excellent (used), Year of construction: 2023, Schulz Schulz Electronic Power Test Cabinet with 8× Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023 For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. This system comes from a professional laboratory environment and is ideal for development, testing, burn-in, and automated test processes. Features & Functions: - 8 × independently usable laboratory power supplies SM330-AR-22 - Each unit offers precise voltage and current regulation - Sequence/automatic mode for complex test routines - Large control cabinet with: • Main switch • Start/Stop • Emergency stop • Side panels with optimal ventilation • Casters for easy transportation - Network labels present (e.g., CTSK05 #01 172.25.108.201) Kodpfx Ajzix A Hsi Redr Technical Data: Control Cabinet (SE6607X-23BA0065-1): - Input: 400 VAC (three-phase) - Maximum current: 63 A - Total output: 8 × 3.3 kW = 26.4 kW - Protection rating: IP20 Power Supplies (Delta SM330-AR-22): - Output up to approx. 330 V / 22 A - High-resolution display - Fully programmable - Industrial grade – extremely reliable Condition: used The test cabinet is in very good condition. Displays are clear, controls clean, cabinet is solid. No visible damage. Scope of delivery: (see picture) - Complete Schulz Electronic test cabinet - 8 × Delta Elektronika SM330-AR-22 power supplies - Integrated control/operation section - Casters mounted (Technical specifications and details are subject to change and error!) If you have any further questions, we will gladly assist you by phone.

Condition: used, Year of construction: 2004, turning length 750 mm turning diameter 310 mm turning diameter over slide rest 175 mm spindle bore 32,0 mm tailstock quill taper MT 3 MK turning speeds 85 - 2200 U/min bed width 200 mm total power requirement 2.2 kW weight of the machine ca. 710 kg range L-W-H 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop (!!) Furnishing: - Spindle speed continuously adjustable in 2x switching stages - "TOS" 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key - "NEWALL" digital display, front left - MULTIFIX steel holder with inserts - Movable tailstock - live center, incl. quick-action drill chuck - digital speed display - Change gears - Foot/spindle brake * all technical data: - Turning diameter over bed 310 mm - Distance between centers 750 mm - Spindle bore 32 mm - Turning diameter over cross slide 175 mm - bed width 200 mm - Spindle mount / DIN55027 5 - Spindle taper 4.5 M - Spindle speed infinitely variable in switching stages 2 - Spindle speed stepless 85-405; 470-2200 rpm - Number of feeds 48 - Metric thread range 0.1 - 28 mm - Thread module range 0.1 - 1.75 Kedoxaa D Tspfx Ai Rsdr - Thread DP range 4 - 70 - Adjustment range cross slide 150 mm - Adjustment range top slide 95 mm - Tailstock quill diameter 40 mm - Tailstock recording 3 MK - Tailstock quill travel 100 mm - Motor power 2.2 kW - Weight 710 kg

Condition: used, PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, terminating module Simatic ET 200S -Type: 6ES7 193-4JAOO-OAAO -Number: 7x module available -Price per piece -Cardboard dimensions: 140/40/H25 mm Ksdpfoh Ahicox Ai Redr -Weight: 0.1 kg

Condition: excellent (used), Rexroth Bosch MA4/200-7301-M control unit 1070079888 GA1 robot controller modul Item condition: Used, in perfect condition R14A1_PD(BOR) More controllers - new and used - you can find in our store! International shipping costs on request! Kodpfx Aok Uumfsi Rsdr

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,250 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), T-Way AD410T54 8X4 Cursor 13-540 CV, wheelbase 4250mm Vehicle variant: Concrete mixer 12-speed HiTroniX, automated Permissible total weight: 32-45 tons New vehicle, not registered Wheelbase: 1875++mm Kdsdpfjzk S H Uex Ai Ror 2-year factory warranty from initial registration White, code 50105 IC 194 T-Way AD410T54 8X4 Cursor 13-540 CV Vehicle variant: Concrete mixer Wheelbase 4250 mm, Model Year 26, 12-speed HiTroniX, automated, GVWR 32-45 tons, New vehicle, Model Year 2025 Wheelbase 1875 mm, 2-year factory warranty from initial registration White, code 50105 IC 194 SPECIAL EQUIPMENT POWERTRAIN DRIVE T.13R22.5, preparation for auxiliary drive, including switch in the dashboard and wiring along the chassis frame Multipower auxiliary drive for continuous operation, non-switchable DRIVE T.13R22.5 Preparation for power take-off, includes switch in the dashboard and wiring along the frame Multipower auxiliary power take-off for continuous operation, non-disengageable CAB EXTERIOR Headlight guards LED marker lights, left and right Transparent sun visor, installed on the outside of the cab roof Flat roof, white Headlight grilles, LED marker lights left and right Transparent sun visor installed on the outside of the cab roof Flat white roof CAB INTERIOR Leather steering wheel Warning horn behind bumper (compressed air) Electronic immobilizer and 2 vehicle keys Leather steering wheel Warning horn behind the bumper (compressed air) Electronic immobilizer, 2 vehicle keys CHASSIS 2 reinforced rear torsion bar stabilizers, D 65mm Tipper version Reinforced front stabilizer bar 13-leaf trapezoid spring, rear axle Radiator cover under the bumper for heavy off-road use 2 reinforced rear torsion bar stabilizers, diameter 65 mm Tipper version Reinforced front stabilizer bar 13-leaf trapezoid spring, rear axle Radiator cover under the bumper for heavy off-road use MAIN FEATURES Rear frame overhang: 1225 mm Rear underrun protection: tubular R58.03 Trailer version for trailer operation with continuous braking system Rear axle ratio: 4.23 Crossmember D-value: 200 kN Rear frame overhang: 1225 mm Rear underrun protection: tubular R58.03 Trailer version with continuous braking system Rear axle ratio: 4.23 Crossmember D-value: 200 kN FUEL SAVING & CONNECTIVITY Expansion module for controlling auxiliary drives Adaptive Cruise Control (ACC) Expansion module for controlling auxiliary systems Adaptive Cruise Control (ACC) SAFETY Side marker lights High-performance engine brake, for ZF transmissions or Allison automatic transmissions Side marker lights High-performance engine brake, for ZF transmissions or Allison automatic transmissions ADDITIONAL EQUIPMENT Tires 13R 22.5 Tires 13R 22.5 PACKAGES Manual air conditioning Air suspension for cab Sunscreen roller for side window, driver and passenger side Luxury driver's seat, air-suspended, heated, multi-adjustable, right armrest Lumbar support and headrest with integrated 3-point safety belt Fuel tank 290 liters Weight variant 8000/8000/26000 kg Manual air conditioning

Year of construction: 2021, condition: new, ebmpapst EC-centrifugal module, backward-curved, single-intake, with support bracket Type: K3G250-PR04-H2 Motor: M3G084-DF Phase: 1~ Nominal voltage: 230 VAC Nominal voltage range: 200 .. 277 VAC Frequency: 50/60 Hz Method of obtaining data ml Kdjdpfx Aiei D Ei Ao Rjr Speed: 3080 min-1 Power consumption: 500 W Current draw: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new and in priginal packaging with 18 pieces per pallet of the production year 10/2021. There are several pallets available. Incl. packaging ex works 53567 Buchholz (Westerwald), Germany. We will gladly organise freight. Please enquire about freight costs, stating the destination.

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module -Type: 80VD1 00PS.C02X-01 -Dimensions: 200/65/H105 mm Kdjdpsyhmx Iefx Ai Rjr -Weight: 0.9 kg.

Condition: good (used), Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100D Servo inverter module -Type: 80VD1 00PD.C022-01 -Dimensions: 200/65/H105 mm Kodpfsyhm Ngjx Ai Rsdr -Weight: 0.9 kg.

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 Kdodpfx Asxz Avbei Rer table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required. *

Condition: new, Like-new HBM AE501 clip-on electronics measuring amplifier from stock, NOS (New Old Stock). Industrial electronics module for measurement and automation technology. Manufacturer: HBM Model: AE501 Series: Clip-on electronics Device type: Measuring amplifier Condition: NOS New Old Stock / New from stock Application area: Industrial measurement technology Suitable for: Strain gauges and load cells Mounting type: DIN rail Design: Clip-on electronics module Kdedpfx Aijzfi Rye Rer Accuracy class: 0.1 Protection class: IP65 Adjustment: DIP switches and potentiometers Signal processing: analog Suitable for measuring: Force, torque, displacement and weight Industrial version: Clip IG Application area: Automation and testing technology Available quantity: 11 pieces.

Condition: as good as new (ex-display), Kistler 2151B30154002 Electromechanical NC joining module List price 19.000 € net The NC joining modules NCFH Type 2151B... consist of a robust housing in which a displacement sensor as an absolute encoder and a piezoelectric push-pull force sensor are integrated. The compressive or tensile forces acting on the sensor generate a proportional electrical charge in the piezoelectric measuring element, which is converted into an analog voltage signal by the integrated charge amplifier. The drive motor is an electronically commutated AC hollow shaft servo motor controlled by a servo amplifier. Constant speed, i.e. constant traverse speed, is ensured. Standard functions such as joining on block, position and force-controlled joining as well as traversing on intermediate positions are supported. Technical data: With hollow shaft motor and compact design Integrated piezoelectric force sensor including charge amplifier and Displacement absolute encoder Measuring direction pressure / tension Measuring range 1: 30 kN Measuring range 2: 15 kN stroke: 400 mm Displacement repeatability: 0.01 mm Max. Travel speed: 300 mm/s With holding brake Item condition: new, with traces of storage Financing through our bank is also possible. komplett-konzept.leasingo.de Kdodsiuxtiepfx Ai Rer Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Siemens: Sinamics Active Line Module 6SL3130-7TE23-6AA3 -Max. Power: 36 kW -Input 3 AC 380-480 V 50/60 Hz -Output DC 600 V 60 A 36 kW -Siemens: Sinamics Double Motor Module 6SL3120-2TE21-0AA3 -Input: DC 600 V -Output: 3 AC 400 V 9 A/9 A -Dimensions: 200/490/H270 mm -Weight: 16 kg Kdjdpfx Aijdkk Uhe Rer

Condition: good (used), Year of construction: 2013, Ref. no.: 18494 Manufacturer: ENGEL Type: Victory 50-200 Spex Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications Ksdpsxzq Skefx Ai Rjdr High precision & repeatability Energy-efficient operation Compact design → space-saving Automation-ready (robot interface possible) Applications: Automotive industry Electronics Medical parts Technical plastic components 👉 Machine in good working condition. Inspection possible upon request.

Year of construction: 2015, condition: used, PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, Terminal Modules Simatic ET 200S 5 pieces -Type: 6ES7 193-4CB30-OAAO -Carton: Contents of 5 pieces each -Number: 6 boxes available Kodpshy T Iisfx Ai Rodr -Price per piece -Cardboard dimensions: 160/180/H50 mm -Weight: 0.3 kg/pc.

Condition: used, functionality: fully functional, Year of construction: 2009, machine/vehicle number: 1017, Used production line for blocks of concrete (and expanded clay). The line was used to produce concrete blocks using expanded clay. From 2023-08, the line is no longer in operation, it has been preserved. Line of blocks in order: - 2 pcs. small silos (with vibro, with pneumo flaps). - Raw material supply conveyor to the weighing hopper. - Weighing hopper. - Raw material supply conveyor from the weighing hopper to the mixer. - Mixer FK Machinery (Poland, 2022, bucket capacity 1200 l, engine power 18.5 kW). - Conveyor for feeding the mixture from the mixer to the SIGMA 1000 vibro press. - Vibro press SIGMA 1000: Type mark: PIERRE ET BERTRAND SIGMA 1000 with automatic TELEMECANIQUE control Manufacturer: ADLER S.A.S. Route de la Bourde, 60360 CREVECOEUR LE GRAND, France Serial no./year of manufacture/year of renovation - 1017/1989/2009 Area on the board (palette): 1130 mm x 550 mm (long x wide) Height of products - max 250 mm Kodpouc Tzvjfx Ai Rjdr - Production shelf. - From the production shelf, the production is transported by autoloader to the mechanism where the production is automatically reloaded from the production boards onto the pallets. Production boards are automatically returned to the vibro press. - Control board with programmer. - Electric switchboard. 2022 year of production Mold 200 x 185 x 490 with which we have been working for the last year. There are many other used Moulds. There are about 500 pieces production boards. There is no compressed air compressor. We can provide disassembly, assembly and equipment startup services.

Condition: used, Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, interface module -Manufacturer: Siemens Simatic S7 Profibus-DP ET 200S interface module -Type: 6ES7 151-1AA02-OABO -Number: 2x module available -Price per piece -Dimensions: 75/45/H120 mm -Weight: 0.1 kg/pc. Kdedpfx Aioh Dnh Eo Rjr