Used Elpu N 120 Mit Behälter for sale (61,293)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" Ibsdpfoykud Rex Aiqja FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Ibsdeykuhcjpfx Aiqea Other systems are immediately available from stock.

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Ibsdpfeyktrtjx Aiqoa Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Isdpfx Aisykub Aeqsba Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments Iodpfjh R Taqex Aiqjba - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) Iedpjmhhy Nofx Aiqeba - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: new, Year of construction: 2025, Multi-use, powerful, heavy and very massive segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding bench is characterized by the full segmentation over the entire working length of 1.40M. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into segments. The bending angle is from 0 to 155 degrees. Lock with the pedal, the hands are free and you can easily position the sheet metal - open and close with your foot. The folding beam is connected to 2 gas pressure dampers, so the control with the folding beam is incredibly easy. Practical tool box on segments at the rear of the machine. Technical specifications: - Max. Working width; 1400mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - weight 300 kg - segment jaws width 30,40,50,60,70 and 100mm Iedpfx Aoc Swhyjiqsba - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5700 euros wheels incl. We are looking forward to your contact!

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Ibjdpeyq Rdyjfx Aiqoa Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. Ibodpfx Asc I T Txsiqja In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1400 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm - Weight 285 kg Price: 5.700 Euro

Condition: used, ETS Solutions Type: M437A + IPA120H + GT762M / GT350M + HE762SQM-370 + THVS720-W5 Technical data: Sine force: 4,000 kgf / approx. 39.2 kN Random force: 4,000 kgf / approx. 39.2 kN Frequency range: DC to 2,500 Hz Max. continuous displacement: 51 mm Max. sine vibration speed: 2.0 m/s Max. sine acceleration: 981 m/s² / approx. 100 g The IPA120H provides a significantly higher peak power during shock testing. Shock power IPA120H / M437A: 3 ms: 12,540 kgf / approx. 123 kN 6 ms: 11,880 kgf / approx. 116.5 kN 11 ms: 9,240 kgf / approx. 90.6 kN 18 ms: 5,676 kgf / approx. 55.7 kN 30 ms: 2,688 kgf / approx. 26.4 kN Max. shock speed: 2.97 m/s Max. shock displacement: 51 mm Pulse shape: Half Sine Pre/Post Pulse: Square 20 % Vibration exciter type M437A Diameter of armature: 370 mm Effective moving mass: 34 kg Number of threaded inserts: 16 stainless steel inserts Threaded inserts standard: M10 Bolt circle: 8 x Ø 150 mm Bolt circle: 8 x Ø 300 mm Resonant frequency of armature without payload: approx. 2,250 Hz Max. static payload: 500 kg Ibedpfozu R U Eex Aiqja Weight of shaker approx.: 2470 kg Dimensions of shaker with GT slip table approx.: 2,426 × 1,082 × 1,185 mm (L × W × H) Base frame: approx. 2,130 mm length, 700 mm height Surface area of slip table: 762 × 762 mm Head expander Type: HE762SQM-370 Surface area: 762 x 762 mm Height: approx. 250 mm Weight: approx. 74 kg Usable frequency range: 5 to 2,000 Hz Resonant frequency: 1,216 Hz Power amplifier Type: IPA120H Amplifier power: 120 kW Efficiency: > 90 % Switching frequency: 112 kHz Signal-to-noise ratio: > 70 dB Dimensions approx.: 550 x 800 x 2070 mm Weight approx.: 550 kg Cooling fan Type: HP-3AV / HP-3A Motor power: 7.5 kW Air flow rate: approx. 0.73 m³/s Air pressure: approx. 0.082 kgf/cm² Compressed air supply for shaker: 6.9 bar Climate testing chamber Type: THVS720-W5 Temperature range: -70 °C to +180 °C Heating rate: 5 K/min Cooling rate: 5 K/min Humidity range: 10 % to 98 % RH Test chamber dimensions: 1400 x 1200 x 1200 mm Test chamber volume: approx. 2016 liters External dimensions: 4600 x 2350 x 2500 mm Voltage supply: 380 VAC / 50 Hz / 3 phases Power consumption: max. 45 kW Refrigerant: R449A / 4.8 kg Refrigerant: R508B / 3.2 kg Weight of climate chamber: approx. 7000 kg Water-cooled Cooling water requirement: 4.9 t/h Cooling water inlet: ≤ 18.3 °C Water pressure: 0.2 to 0.4 MPa Water connection: G2" / DN50 Mobile shaker chamber Travel distance of chamber: approx. 1050 mm The climate chamber is mounted on a rail system and designed for combination with the horizontal slip table and the vertical shaker. Chamber equipped with: 1 x vertical connection plate 2 x horizontal connection plate 1 x blind plate Thermal barrier for head expander Thermal barrier for slip table Application: Vibration testing Sine testing Random / noise testing Shock testing Temperature testing Humidity testing Climate and vibration testing Environmental Stress Screening (ESS) Condition: used Scope of supply: Shaker M437A IPA120H power amplifier GT762M / GT350M slip table HE762SQM-370 head expander HP-3AV cooling fan THVS720-W5 climate testing chamber Age-related and usage-related signs of wear Dirt, paint chips and traces of corrosion present Optical condition according to pictures Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer further questions by telephone. If you have any further questions, please do not hesitate to contact us by telephone.

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. Ibedpfx Aiezuwmbeqoa DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Iedpozu Hvxsfx Aiqoba

Condition: new, Siemens Teleperm M 6DS1700-8BA E1 with C79458-L442-B5, unused, 100% functional, in opened original packaging Ibedpfxszu E H No Aiqsa

Condition: new, Siemens C98043-A1210-L20 Simoreg board with accessory set C98043-A1210-D2-1 < unused > in opened original packaging, 100% functional Ibedpfxezu Etce Aiqsa

Condition: ready for operation (used), Siemens SINUMERIK 840D/DE NCU 572.2 6FC5357-0BB21-0AE0 SN: ST-M82029648, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos Ibodpjzu Ez Hjfx Aiqsa

Condition: ready for operation (used), Stöger 9278 screwdriving automation SN: SES003743 with 2 x Kistler Z90002.15 sensors SN: 5078913 + 5078912, used, in good condition, 100% fully functional, scope of delivery as per photos. Ibedpfx Aszu Hcrsiqsa

Condition: ready for operation (used), Weidmüller ICD06 control panel with 3.5" floppy disk drive, used, good condition, 100% functional Isdpfxozu Hube Aiqoba

Condition: ready for operation (used), Supfina 811-261 Tool spindle with draw tube SN:349 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Ibsdpfx Aijzu Hd Asqja

Condition: ready for operation (used), Siemens SIM encoder, communication with connecting cable for encoder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ibjdpozu Evdsfx Aiqsa

Condition: new, Siemens Teleperm M 6DS1144-8AA E2 with C79458-L436-B540, unused, 100% functional, in opened original packaging Ibedpfx Ajzu E Hijiqea

Condition: ready for operation (used), Stäubli TX90 industrial robot arm SN:F04/50Y0A1/A/01 with CS8 C complete control and operating panel,used, normal signs of wear, 100% functional, scope of delivery according to photos,ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ibjdpozu Hawjfx Aiqsa

Condition: ready for operation (used), Supfina 811-261 tool spindle with draw tube SN:241, used, normal signs of use, 100% functional, scope of delivery as per photos Ijdpfjzu Hdvex Aiqsba

Condition: ready for operation (used), Trumpf 150 AQ VIS laser focusing optic 22-43-83-00/02 with 22-43-82-00/01 and 22-27-04-00/05, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Ibsdpfx Aozu Hlgoiqja

Condition: ready for operation (used), Siemens A5E00827436-H3 SN, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Ibsdezu Enaepfx Aiqoa

Condition: ready for operation (used), Siemens SINAMICS 6SL3111-4VE21-6EC1 Combi Power Module, SN: ZVPG4370136, used, in good condition, 100% functional. Delivery as shown in the photos. Professionally fully overhauled and tested with a 12-month warranty. 100% functional, delivery as per photos. The agreed sales discounts do not apply to this item. Please request the price separately! Ibodezu Ey Aspfx Aiqoa