Used Elumatec Double Miter Saw for sale (16,009)

Condition: used, Technical specifications: Max. blade diameter: 300 mm Cutting range: 45° Pneumatic clamping Blade guard Pneumatic blade lifting Ksdszht Sajpfx Ah Ajdp Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 1.5 kW

Condition: used, Year of construction: 2023, DOUBLE GLASS STRIP CUTTING SAW TRF 527 VIS CE 1 unit DOUBLE GLASS STRIP CUTTING SAW TRF 527 VIS CETRF 527 VIS: Double miter saw for simultaneously cutting two glass strips positioned one above the other. The right saw unit is fixed, and the left unit can be adjusted. The set cutting length can be read from a digital display. Both units have supports that enable the simultaneous cutting of 2 glass strips. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify the loading and unloading of the machine. STANDARD EQUIPMENT:• Fixed unit on the right• Digital display• Pressure monitoring system• 2 carbide-tipped saw blades• Electrical system with motor brake, undervoltage release, motor protection switch• Pressure monitoring system• Tool set• Safety devices with horizontal clamping devices, swiveling• Two-hand operation• Belt drive• Pneumatic unit lift• Center supportTECHNICAL DATA:• Motor power 2 x 1.2 kW• Saw blade diameter Ø 220 mm• Max. cutting height without support 80 mm• Max. cutting width at 90 degrees 55 mm• Max. cutting width at 45 degrees 40 mm• Max. cutting length 2800 mm (optional 4000 mm)• Min. cutting length 158 mm• Weight 217 kg• Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 unit Maximum cutting length• 4000 mm Star stop 4 positions 1 unit Set of 2 mechanical stops for adjusting up to 4 intermediate angles Additional center support 1 unit Adaptations for rebated profiles 1 unit Adaptations for rebated profiles according to drawing: - Attachment to the clamping devices to compensate for the profile inclination - Extensions to the rear stops of the units and the center support The sketch below (in green) shows a beveled presser that follows the inclined profile and thus presses it against the extension (drawn in red) on the stop. Location: Garbsen Kdjdpoxnlgcjfx Ah Aop

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Very good condition. Available immediately. Kedpfx Ahod N Rb Do Aodp

Condition: good (used), Year of construction: 2000, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 500 mm, Double mitre saw Pertici 500F2K, Kdodpfx Aozfmkwsh Aep capable of double cuts, saw blade diameter 500 mm, positioning via machine control, horizontal and vertical clamping units, seal holder.

Condition: used, Year of construction: 1991, machine/vehicle number: DS11, functionality: fully functional, power: 9 kW (12.24 HP), saw blade diameter: 370 mm, Equipment: saw blade guard, Manufacturer: Bäuerle Type: DS11 Year of manufacture: 1991 Power: 2 x 4.5 kW Saw blade diameter: 370 mm Kdjdpjy Tphkofx Ah Asp Length measuring system (automatic): Shortest dimension: 225 mm Longest dimension: approx. 1900 mm

Condition: used, Bacci Morta-saw machine with 2 benches and 2 tips Kdjdpfxszg Hz Sj Ah Asp

Year of construction: 2023, condition: new, functionality: fully functional, Description Double mitre saw RAPID DGL 200 M Working length: 5,100 mm Kdjdpfotdgitjx Ah Aop Working height: 160 mm Can be swiveled: yes Aluminum spraying device available Short dimension stop available Socket for external extraction available Vertical clamping device available Roller conveyor traveling (feed on the right) Rapid DGL 200 M double mitre saw ----- with saw blade diameter 500 mm, manual length adjustment with digital length display digital length display, pneumatic angle adjustment 45° and 90°, Simple operation and top quality ----- For precise and low-burr cutting of aluminum, plastic and wooden profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely stable machine bed - Complete grip of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- Perfect dimensional and angular accuracy guaranteed. ----- To achieve this, we use precise and efficient movement technology: Ball bushing guides for length adjustment, spring suspension of the swivel units for convenient and safe angle adjustment between 45° and 90°. The length and angle of this two-head mitre saw are adjusted manually. Greater ease of use and increased performance can be achieved with the aid of a digital length display and pneumatic swivel device. A wide range of profile systems can be processed with 500 mm saw blades. can be processed. Technical data ----- Drive: 2 x 2.2kW three-phase 400 volt motors Swivel range: manual 45° to 90 Saw blade: 500 mm diameter Cutting lengths: 5,100 mm, Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Air pressure: 7 bar Dimensions: 5250/1420/1900mm weight: 1.260kg

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 026702200004, Double-head automatic saw Blade diameter: 420 mm Barcode printer Kdodoy Sac Njpfx Ah Ajp

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width Kdsdexrzfvopfx Ah Ajp b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm

Condition: excellent (used), Year of construction: 2017, Very good technical condition. Ready for operation. The machine is designed for cutting aluminum and PVC. E 580 control system. Disc diameter: 500 mm. Cutting according to external dimensions, without correction. Automatic lowering and raising of disc guards. Pneumatic adjustment of the cutting angle from 45 to 90 degrees. Kedjzgu Efjpfx Ah Aedp Printer.

Condition: used, Year of construction: 1990, cutting diameter 500 mm Kdjdpfx Ahjv U Dluj Asp cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Condition: good (used), For sale: a professional, very heavy-duty, and stable twin-blade hydraulic saw from the renowned Turkish manufacturer RULMAK, model RM.HCD.1. The machine is designed for continuous operation in demanding sawmill environments – ideal for quickly cutting thick timbers, blocks, and producing pallet components or garden furniture elements. ⚙️ Key Features of the Machine: Smooth feed rate adjustment via a frequency inverter: Ensures precise and rapid adjustment of the feed rate (controlled from the control panel) to the hardness and dimensions of the wood being processed. Extremely powerful main motors (2 x 75 kW): A total of 150 kW of power guarantees that the machine will not slow down even under maximum load and when working with hard, wet, or frozen material. Ksdpfxszdwhko Ah Ajdp Substantial weight (5500 kg): The very heavy, stable frame made of thick-walled steel effectively dampens all vibrations, which translates into perfect quality of the cut material and a longer service life of the bearings and blades. 📊 Full Technical Specifications: Manufacturer: RULMAK Model: RM.HCD.1 Year of manufacture: 2007 Design: Twin-blade (upper blade + lower blade) Power supply: 400 V / 50 Hz

Condition: reconditioned (used), functionality: fully functional, Effective cutting length: 4000 mm Blade diameter: 450 mm Pneumatic tilting of the cutting heads Tilting angle: 90-45° Kodpfxezgh Umo Ah Aodp

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 1425131305, Lightly used, in very good condition. Kjdezdpz Njpfx Ah Ajdp

Condition: new, Year of construction: 2024, machine/vehicle number: MR005970, Perfect cutting 200mm high! In double miter and with a fixed zero point. When the machine is mitered, the saw blade continues to enter the material at the same point. Technical specifications: - Fixed zero point: Yes - Miter angle: 45-90-25 ° - Tiltable: Yes - Tilt angle: 60-90-30 ° Kdsdpfx Ajvzl Scsh Aop - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm - Weight: 310 kg - Saw blade speed: 2800 /min - Motor power: 7 hp - Serial number: 2024/95/5

Condition: used, Year of construction: 1999, functionality: unexamined, input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 300 mm, saw blade bore: 30 mm, Double saw with OMGA feeder Kjdpszcv Iujfx Ah Aedp

Condition: excellent (used), functionality: fully functional, Motor power 2.2 kW Manual feed of the aggregates Blade diameter 330 mm 3000 rpm Kdedpfey N Ribsx Ah Asp Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Cutting process started by foot pedal Safety switch Width 900 mm, height 1500 mm

Condition: new, 0 4000,5000 mm Kdjdpfx Asxmk Amsh Aop Working height 120 mm 0 ja

Condition: good (used), functionality: fully functional, OMGA Radial 700 radial saw Cutting width at 90°: max. 700 mm Cutting height: 125 mm Kdsdpozdy E Eefx Ah Ajp Saw blade diameter: 400 mm Cutting angle adjustment in 3 positions Motor power: 3 kW Machine dimensions: 125 x 130 x 152 cm

Condition: used, machine/vehicle number: 4038, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 330 mm, saw blade bore: 32 mm, actuation type: pneumatic, rotational speed (max.): 3,800 rpm, ELU Miter saw, model MGS 73 for aluminum and plastic profiles Saw blade 330 x 3.2 x 32 mm, Z = 96 (negative tooth angle) Cutting height approx. 80 mm, Miter setting left/right +/- 45°, 2 pneumatic clamps, horizontal, 2 pneumatic clamps, vertical, Motor 2 kW (2.7 HP), 380 volts, 50 Hz, pneumatic feed system with hydraulic feed brake, 2-hand operation: left: clamping and releasing, right: saw feed, cast iron table extension on the right with stop slider and measuring scale 0 - 3,000 mm Kdedjzbr Uzepfx Ah Asp without emergency stop switch!, without motor brake! as inspected, ex works Seevetal, excluding transport, subject to prior sale.

Year of construction: 1994, condition: used, functionality: fully functional, Emmegi Norma 350 TU/4 double-head saw with dust extraction system and spare blades for cutting PVC profiles. €2,500 (excluding VAT). No delivery; must be picked up at the workshop. Kodpfjza Smnox Ah Aodp

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm Kjdpfjymd I Dsx Ah Aodp – Package depth: 1430 mm – Package height: 1830 mm – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: excellent (used), I am offering for sale a professional, industrial-grade, twin-arbor multi-blade saw from the renowned A.COSTA brand, model PUMA. The machine has been serviced and is ready for immediate operation in the most demanding sawmill or industrial woodworking environments. Its robust construction, combined with powerful drives and modern control systems, makes it a machine with exceptional performance. Key technical parameters and advantages of the machine: Powerful main motors: 2 x 55 kW – ample power reserve guaranteeing smooth and trouble-free operation without any drop in RPM, regardless of the hardness of the wood being processed. Kdsdpfszchy Ajx Ah Asp Maximum cutting height: up to 190 mm. Modern feed system: Smooth feed speed adjustment via an inverter. This allows for perfect adaptation of the operating parameters to the specific material and optimization of the cutting process. Condition of the crawler tracks: Like new – ensures perfect grip, stable and precise material guidance without slippage. Precise control: The machine features an electronic height display. Additional information: The ergonomic control panel shown in the pictures, with clear ammeter indicators for both arbors, allows for constant monitoring of the engine load. The A.COSTA PUMA is synonymous with reliability and robust construction, ensuring trouble-free operation for many years to come. Please contact me for further technical details and to arrange a viewing.

Year of construction: 2017, condition: ready for operation (used), Swivelling angles: 45°/90°/135°, max. speed: 2800rpm, working length: 5350mm, saw blades: 2 carbide-tipped saw blades 420x30mm, extraction connection: 160mm, compressed air connection: 6-8bar, power per motor: 2.2kW, length: 4200mm, weight: 900kg. Features: hydropneumatic saw feed, digital display, center support, handwheel, four pneumatic clamping cylinders, electrical control for parallel operation of machine and extraction system, fixed stop 24mm next to the fixed saw unit, adjustable via scale, with documentation. An on-site inspection is possible. Kdjdozaq D Espfx Ah Aop

Condition: excellent (used), functionality: fully functional, AUTOMATIC DOUBLE MITRE SAW model OMS SALVARANI INVINCIBILE OK 330 second hand machine working conditions : good for cutting wood, frames, pvc, aluminium, plastics and various materials oil pneumatic downstroke of the blade groups inclination of cutting blade groups + / - 45° n.02 motors . power Hp 3 each one blades diam. mm. 330 max. useful cutting length mm.3000 min. useful cutting length mm.350 max. useful cutting width 90° mm. 165 x 115 H Kjdswqdqnspfx Ah Aodp max. useful cutting width 45° mm. 115 x 115 H volt. 380/50 weigth kgs. 600 volt. 380/50