Used Faulty Recirculation Thermostat for sale (792)

Year of construction: 2026, condition: new, functionality: fully functional, Wood/gas-fired pizza oven with rotating stone, Ø150 cm: MARANA FORNI RotoForno SUeGIU series – RAL 130 brushed Mixed wood/gas fuel MARANA Forni gas system Laedpfxozt Rhcj Acfsf Capacity: 18 pizzas Ø290 or 13 pizzas Ø330 mm Cooking surface Ø1500 mm Rotating and liftable SUeGIU stone Micro-perforated stone surface High-density refractory stone Stone density: 3200 kg/m³ Thermal recovery: 40 to 100 °C Dome cladding RAL 130 brushed included RAL color to be specified Smooth black granite finish included Mouth width: 600 mm Stone height: 1200 mm Smoke outlet: Ø200 mm Right (DX) or left (SX) opening Thermostat with 5 flame levels Removable C-shaped door included C-shaped door used during heating Backup Patch console included Rotation maintained via Patch console Front support cover panels included Dimensions vary by approximately ±2% Dimensions: 2200 x 2200 x 2050 mm Weight: 2170 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Reverse Osmosis Plant for ethylene glycol recovery, with a 12 m³ raw-water storage and homogenisation tank, nominal feed flow rate of 4 m³/h at 4 bar and filter backwash flow rate of 11 m³/h at 1.5 bar. Includes an automatic downflow multimedia filter with anthracite and sand beds supported on gravel, designed to remove suspended particles and protect the membranes. Compact skid-mounted reverse osmosis unit with two-stage filtration using replaceable 20- and 5-micron cartridges, a variable-speed high-pressure pump and a two-stage (1+1) × 6 reverse osmosis membrane configuration. Equipped with 8-inch DOW spiral-wound aromatic polyamide membranes installed in GRP pressure vessels rated up to 1,000 psi. Nominal recovery rate: 90%, equivalent to a theoretical permeate production of approximately 3.6 m³/h under design conditions. Low- and high-pressure piping and interconnections manufactured from AISI 316L stainless steel. Includes recirculation, front and side permeate collection, a CIP chemical cleaning system, membrane flushing, a GRP solution-preparation tank, a 25-micron mesh microfilter and a delivery pump for cleaning solutions and permeate water. Automated control system based on a Siemens S7-200 PLC, providing measurement and control of flow rates, temperature, pressures, pressure drops, operating times, pumping, backwashing, flushing and process alarms. Operator panel with a 6-inch colour touchscreen for parameter display and configuration, start/stop control, filter washing, alarm monitoring and trend graphs. Includes a 2 m³ reverse osmosis reject-water tank for subsequent transfer to the evaporator. Serial No.: MPP51525. Ledpfszvddcex Acfjaf

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm Ledszuygqepfx Acfeaf • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, mileage: 41,000 km, power: 115 kW (156.36 HP), first registration: 07/2023, fuel type: gasoline, next inspection (TÜV): 07/2028, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, Special equipment: Galvanized controls, Parking Assistant Package, Driving Assistant System: Parking Assistant, Driving Assistant System: Parking Assistance System (side), Driving Assistant System: Reversing Assistant, Driving Assistant System: Reversing Assistance System with Emergency Braking Function (Active PDC), Sun protection glazing (darkened rear) Additional equipment: Lasdpfx Aezlvivjcfof Storage Package, Airbag on passenger side can be deactivated, Airbag driver/passenger side, Equipment Package: Connected Professional, Service System: Remote Services, Exterior features: High-gloss Shadow Line, Exterior mirrors electrically adjustable and heated, Exterior mirrors in vehicle color, Turn signal integrated into exterior mirror, BMW Live Cockpit Plus, Service System: Intelligent Emergency Call including TeleServices, Service System: BMW Intelligent Personal Assistant, BMW Curved Display, On-board computer, DAB tuner (digital radio reception), Roof rails high-gloss Shadow Line, Anti-theft wheel bolts, Through-loading system (rear center armrest), Dynamic brake lights, Dynamic Traction Control (DTC), First aid kit, Driving Assistant System: Speed limit recognition with speed limit assistant, Driving Assistant System: Driving Experience Control, Remote unlocking of tailgate, Velour floor mats, Footwell lighting (front), Luggage compartment partition (net), Luggage compartment lighting, Speed limiter (Speed Limit Device), Rear lights LED, Interior trim: Interior trim Quartz Silver matte, Body: 5-door, Automatic climate control 3-zone with automatic recirculation control, Head airbag system rear, Head airbag system front, Rear headrests foldable, Steering wheel (sports/leather) with multi-function, Light alloy wheels, Model revision, Engine 2.0 Ltr. - 115 kW, Gasoline particulate filter (OPF), Park Distance Control (PDC) front and rear, Parking brake electric, Low emission according to emission standard Euro 6d, Turn signals LED, Side airbag rear, Side airbag front, Seat cover / upholstery: Fabric Hevelius, Mirror package, Exterior mirrors electrically foldable, Exterior mirrors with curb-assist function, right, Interior mirror with automatic anti-dazzle function, Start/Stop system (function), Solid paint, Warning triangle, Widescreen Display, Heat-insulating tinted glass, Windshield (version: climate comfort)

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. Laodpfxozvhlkj Acfof The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, mileage: 220,000 km, first registration: 01/2008, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 08/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,800 mm, loading space length: 3,300 mm, Equipment: ABS, central locking, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note!!! Sales are preferably made to business customers. Internal ID number: [3443] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German technical inspection) & emissions test * Nationwide delivery * Financing also possible without a down payment * Spring offer: On request and for an additional charge of only €999, increase the trailer load capacity to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * German vehicle * Immediately ready for use * Long flatbed * Large 2.4-liter diesel engine * Rear-wheel drive * 16-inch tires Special equipment: 2nd battery, radio preparation, 2 speakers, tinted glass Additional equipment: Airbag for driver, turn signal integrated into exterior mirror, tachometer, electronic differential lock (EDS), vehicle without fog lights, heating with recirculation, body/superstructure: standard flatbed, headlight range adjustment, engine 2.4 liters - 74 kW TDCi catalytic converter, flatbed width 2000 mm, flatbed length 2450 mm, production site: Otosan, wheelbase 3504 mm, mud flaps at the front, seat package 21: driver's seat (3-way adjustable) - front passenger single seat (2-way adjustable)----Would you like to lease or finance? We offer attractive deals – also possible without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 Lsdpfxszhhyxj Acfsaf 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m.----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 115,000 km, power: 77 kW (104.69 HP), first registration: 10/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Lajdpfx Asy Uqqpjcfef Contact our sales consultant quickly and easily. Attention! Sales preferably to commercial businesses. Internal ID number: [3306] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV & AU (German technical inspection and emissions test) * Nationwide delivery * Financing possible, even without a down payment * Spring offer: On request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown separately * Regularly maintained * German vehicle * Immediately ready for use * 2nd owner * Euro 6 standard * Accident-free * High + Long * Trailer hitch 2,800 kg * Air conditioning * Rear view camera * Bluetooth multimedia system * 3 seats Special equipment: Load compartment light LED, tire repair kit Additional equipment: 3rd brake light, storage compartment in the headliner of the cab, airbag driver side, anti-slip regulation (ASR), audio system: radio/CD player with multi-function display, exterior mirrors electrically adjustable and heated, turn signal integrated in exterior mirror, floor covering: vinyl in the cargo/passenger compartment, on-board computer, headlining in the passenger compartment, tachometer, electronic brake-force distribution (EBD), electronic differential lock (EDS), driver assistance system: hill start assist, generator 165 A, grab handle B-pillar, rear wing doors without glazing (opening angle 180 degrees), heater with recirculation, interior filter: pollen filter, body/structure: high-roof panel van standard, body variant: medium-height roof, radiator grille silver, load compartment partition high behind driver and front passenger, steering column (steering wheel) height/length adjustable, headlight range adjustment, truck registration, engine 2.0 Ltr. - 77 kW TDCi CAT, parking pilot system front and rear, production plant: Otosan, wheelbase 3750 mm, wheel covers, low emission according to exhaust standard Euro 6, sliding door cargo/passenger compartment right, side protection strips wide (side cladding), seat package 13: driver's seat (4-way adjustable) - front passenger double seat, fabric, seats in the cargo/passenger compartment: 1st row, 3-seater bench, steel rims 6.5x16, bumper partially painted, Trend, rear step integrated, tinted glazing, lining in the cargo/passenger compartment: half-height, second key with folding remote control ----Do you want to lease or finance? We offer attractive offers – even without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our business customers.

Condition: used, mileage: 35,313 km, power: 81 kW (110.13 HP), first registration: 02/2024, fuel type: diesel, overall weight: 2,825 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 1237. PM76183 ----EQUIPMENT * Trailer coupling, fixed * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED turn signals at the front - Cornering lights, static - High beam assistant * Load compartment protection package - Side wall lining, high - Load compartment floor vinyl covering "Easy Clean" - Load compartment lighting (LED), extra bright * 2-stage unlocking for passenger compartment and load compartment (rear door flaps or rear swing door). Prevents locking of open doors. * Transmission: 6-speed manual transmission * Anti-lock braking system with electronic brake-force distribution (EBD) * Airbag, driver's side * Exterior mirrors, electrically adjustable and heated * Exterior mirror housings, black-grey plastic * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g., remaining range) and outside temperature display * Roof, flat * Roof console * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Electronic Stability Program (ESP) - Hill start assist - Safety brake assist (EBA - Emergency Brake Assist) - Traction control (TCS) * Power windows, front, electric - with quick-down/up function for driver's side * Parking brake, electronic * FordPass Connect - including live traffic information and 5G Modern WLAN hotspot - Information about the current status or location of the vehicle, as well as control of selected vehicle functions via the smartphone with the FordPass app - Current traffic information in real time (in conjunction with navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) - More information about FordPass Connect can be found at / * Windshield, heated * Grab handles, driver and front passenger side * Glove compartment with lockable lid * Interior lighting, front, with delay * Automatic climate control, front - with recirculation heating - with R-1234yf refrigerant * Headrests, front (3) Ljdpfx Acjzu Uqksfjaf * Fuel tank, 55 liters * Paint: Solid paint * Load compartment lighting (LED) * Steering wheel: Plastic steering wheel * Center console, small * Emergency Assist eCall emergency call system for sending an emergency call in the event of an accident or manual activation * Technology Package 2 - Ford audio system with 13 multifunctional display and Ford SYNC 4 - Pre-Collision Assist, camera-based - Driver drowsiness warning - Traffic sign recognition system - Wrong-way driver warning function - Lane Keeping Assist including Lane Departure Warning - Park Pilot system, front and rear - Cruise control - Intelligent speed limiter with speed limit display - Rearview camera * Particulate filter: Diesel particulate filter * Radio: Ford audio system with 13 multifunctional display and Ford SYNC 4 - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - FordPass Connect including live traffic information and 5G Modern WLAN hotspot - 13-inch TFT multifunctional display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa built-in voice assistant - 4 speakers * Tire pressure monitoring system (TPMS - Tyre Pressure Monitoring System) * Windshield wipers with rain sensor * Sliding door: Sliding door, right * Mud flaps, front and rear * Power steering * Seat belts - Seat belt pretensioners and force limiters, front - Warning system for unfastened d

Condition: used, mileage: 7,009 km, power: 96 kW (130.52 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,954 mm, next inspection (TÜV): 08/2028, color: silver, emission class: euro6, number of seats: 3, loading space volume: 14 m³, loading space length: 3,680 mm, loading space width: 2,140 mm, loading space height: 1,800 mm, working width: 2,098 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, soot filter, traction control, Automatic transmission (8-speed), air conditioning, central locking with remote control, exterior mirrors electrically adjustable and heated - long arm, exterior mirrors electrically foldable, electric windows, on-board computer, driver assistance system: hill start assist, lane keeping assist with driver drowsiness detection, emergency brake assist, traffic sign recognition, adaptive cruise control (cruise control) with distance control ACC, intelligent speed limiter, multi-function leather steering wheel with heating, parking pilot system, rear view camera, spare wheel with road tires, heated windshield, windshield wipers with rain sensor, daytime running lights, fog lights, digital radio reception (DAB+), audio navigation system with USB and Bluetooth hands-free system, auxiliary heater, heat-reflective glazing, driver airbag, passenger airbag, side airbags, anti-lock braking system (ABS), electronic stability program (ESP), seats in the cab: driver's seat with lumbar support, start/stop system, particulate filter, service history available, blind spot monitoring including cross traffic alert, steel rims, seat package 18A: driver's seat (4-way adjustable) - passenger double seat (2-way adjustable), fabric, paint: polar silver, metallic, audio/radio remote control on the steering wheel, FordPass Connect including eCall, 2nd battery, speed limiter system 120 km/h, intelligent acceleration control, cold start package, technology package 15, lane keeping assist, exterior mirrors electrically adjustable and heated, pre-collision system, seat package 13: driver's seat (4-way adjustable) - passenger double seat - fabric, driver's seat armrest, technology package 8, headlight assistant with day/night sensor, permissible total weight 3.50 t, black-grey radiator grille, radiator grille with chrome trim, turn signal integrated into the exterior mirror, storage compartment in the cab roof liner, lockable glove compartment, heater with recirculation, My Key (2nd vehicle key programmable), interior lights in the cab: front reading light, docking station (MyFord Dock), electronic brake force distribution (EBD), steering column (steering wheel) height/length adjustable, electronic traction control, driver assistance system: crosswind assist, Trend, body/superstructure: standard platform body, wheelbase 3954 mm, drive type: front-wheel drive, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Changes, errors and prior sale reserved. Delivery possible for an extra charge. Export registration can be arranged here. We will also take your old vehicle in trade. Retrofitting options include: - trailer couplings, also up to 3500 kg - auxiliary heaters - screen for reversing camera or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge. Lasdpfx Aezum Rcocfof

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lasdpozukausfx Acfsf Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Lajdpfx Acjzui U Refef Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Lsdpfezui Uwsx Acfoaf Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Huber Unichiller 060Tw water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Equipment type: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: up to 6 kW Offered is a used Huber Unichiller 060Tw with a water-cooled refrigeration unit and Pilot ONE touchscreen control. The unit is designed for the precise cooling and temperature control of external closed circuits and is suitable for applications such as process cooling, machine cooling, laboratory applications, chemical processes, and technical and industrial systems. Technical data: Temperature range: -20 to +40 °C Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Cooling capacity at +15 °C: 6.0 kW Cooling capacity at 0 °C: 5.0 kW Cooling capacity at -10 °C: 3.1 kW Cooling capacity at -20 °C: 1.7 kW Power connection: 460 V / 3 phases / 60 Hz Max. current draw according to nameplate: 6.7 A Refrigerant: R507 Refrigerant charge: 1.2 kg Max. pressure: 25 bar CFC- and HCFC-free Circulating pump: C3 Max. flow rate: 122 l/min Max. delivery pressure: 5.6 bar Pump connection: G1 1/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption: approx. 70 to 330 l/h, depending on the inlet temperature Min. fill volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Control: Huber Pilot ONE controller 5.7" color touchscreen Graphical temperature display Program and ramp functions Digital level indicator Multilingual user interface Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Dimensions: Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Ljdpszui Uqjfx Acfoaf Net weight: approx. 213 kg Equipment: Water-cooled refrigeration unit C3 circulating pump Pilot ONE touchscreen controller Stainless steel housing Stainless steel circulating pump Atmospherically open expansion tank Copper-brazed evaporator Digital level gauge Main switch Ethernet, USB, and RS232 interfaces Pt100 connection Cooling water and process connections Castors Connection hoses as shown in the pictures Shipping data: Dimensions: approx. 600 × 600 × 1450 mm Weight: approx. 213 kg net Shipping by freight forwarder possible. Scope of delivery: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures. Condition: Used. Optical condition as shown in the pictures. The unit is available upon agreement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: excellent (used), Huber Unichiller 055Tw Recirculating Chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Year of manufacture: 2014 Machine type: water-cooled recirculating chiller Temperature range: -10 to +40 °C Cooling capacity at +15 °C: 5.5 kW Offered for sale is a used Huber Unichiller 055Tw with a water-cooled refrigeration unit, recirculating pump, and Pilot ONE touchscreen control. The Unichiller is designed for externally closed temperature control circuits and is suitable for heat removal in industrial and technical processes, for cooling machines and systems, and for applications in laboratories, research, and production. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw Year of manufacture: 2014 Serial number: 203739/14 Temperature range: -10 to +40 °C Temperature stability at -10 °C: 0.5 K Power connection: 400 V / 3~ / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar Protection class: IP20 Cooling capacity: at +15 °C: 5.5 kW at 0 °C: 3.0 kW at -10 °C: 1.5 kW Recirculating pump: C3 Max. flow rate: 100 l/min Max. delivery pressure: 6.5 bar Pump connection: G 1 1/4 AG Cooling water connection: G 1/2 AG Min. cooling water differential pressure: 0.6 bar Max. cooling water pressure: 6 bar Min. filling volume: 5.9 l Expansion volume: 7.5 l Control: Pilot ONE controller with 5.7" color touchscreen Internal temperature sensor: Pt100 Connection for external Pt100 sensor Digital interfaces: Ethernet, USB, and RS232 Digital level indicator Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1450 mm Weight: approx. 168 kg Equipment: Water-cooled refrigeration unit Recirculating pump Pilot ONE touchscreen controller Stainless steel housing Atmospherically open expansion tank Digital level indicator Ethernet, USB and RS232 interfaces Movable unit on castors Process and cooling water connections Shipping data: Weight of the unit: approx. 168 kg Dimensions of the unit: approx. 600 × 600 × 1450 mm Due to its size and weight, the unit will be shipped by freight forwarder. Condition: Lasdpfx Aozui T Hscfof Used condition with corresponding optical signs of wear. Scope of delivery: 1x Huber Unichiller 055Tw 2x Stainless steel flexible hose Scope of delivery as shown in the pictures. The unit is available for immediate delivery. Inspection possible by appointment. The scope of delivery corresponds to the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Huber Unichiller 060Tw water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Equipment type: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: up to 6 kW Offered is a used Huber Unichiller 060Tw with a water-cooled refrigeration unit and Pilot ONE touchscreen control. The unit is designed for the precise cooling and temperature control of external closed circuits and is suitable for applications such as process cooling, machine cooling, laboratory applications, chemical processes, and technical and industrial systems. Technical data: Temperature range: -20 to +40 °C Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Cooling capacity at +15 °C: 6.0 kW Cooling capacity at 0 °C: 5.0 kW Cooling capacity at -10 °C: 3.1 kW Cooling capacity at -20 °C: 1.7 kW Power connection: 460 V / 3 phases / 60 Hz Max. current draw according to nameplate: 6.7 A Refrigerant: R507 Refrigerant charge: 1.2 kg Max. pressure: 25 bar CFC- and HCFC-free Circulating pump: C3 Max. flow rate: 122 l/min Max. delivery pressure: 5.6 bar Lajdpfx Acjzui Tgsfsf Pump connection: G1 1/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption: approx. 70 to 330 l/h, depending on the inlet temperature Min. fill volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Control: Huber Pilot ONE controller 5.7" color touchscreen Graphical temperature display Program and ramp functions Digital level indicator Multilingual user interface Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Dimensions: Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Net weight: approx. 213 kg Equipment: Water-cooled refrigeration unit C3 circulating pump Pilot ONE touchscreen controller Stainless steel housing Stainless steel circulating pump Atmospherically open expansion tank Copper-brazed evaporator Digital level gauge Main switch Ethernet, USB, and RS232 interfaces Pt100 connection Cooling water and process connections Castors Connection hoses as shown in the pictures Shipping data: Dimensions: approx. 600 × 600 × 1450 mm Weight: approx. 213 kg net Shipping by freight forwarder possible. Scope of delivery: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures. Condition: Used. Optical condition as shown in the pictures. The unit is available upon agreement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2001, Industrial cooling lubricant or oil cleaning system Belt filter system for cleaning cooling lubricants with cooling unit Ljdpfey S D E Ujx Acfoaf The system is a centralised system for cleaning and processing cooling lubricants or oils used in metal-cutting production (e.g. grinding, milling, turning) It combines mechanical filtration (belt filter), liquid storage and temperature control by means of an integrated cooling unit. General information Machine type: Centralised system for cooling lubricant preparation Filter unit manufacturer: KNOLL Maschinenbau GmbH, Bad Saulgau Type: PF160 / 200 Year of manufacture: 2002 Reference number: 80.0917 Manufacturer cooling unit: HYFRA Industriekühlanlagen GmbH, Krunkel Type: TRK 50 EF-SS Serial number: Chiller year of construction: 2001 2. technical data - chiller (HYFRA TRK 50 EF-SS) Cooling capacity: 2000 W Max. Ambient temperature: 37 °C Permissible operating overpressure: 29.5 bar Refrigerant: R 407c Voltage: 3~ / PE / 400 V Frequency: 50 Hz Max. Operating current: 5.9 A Connected load: 3.3 kW Water filling weight (total): approx. 160 kg 3. function & area of application The system is used for centralised cleaning, cooling and recirculation of cooling lubricants or grinding oil in metal-cutting operations. It consists of a belt filter module (KNOLL PF160/200) for the filtration of solids and chips, a cooling unit (HYFRA TRK 50 EF-SS) for temperature control of the liquids Translated with (free version)

Condition: used, mileage: 74,777 km, power: 77 kW (104.69 HP), first registration: 05/2017, fuel type: diesel, overall weight: 2,600 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,972 mm, total width: 2,032 mm, total height: 1,981 mm, loading space length: 2,411 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0499. HM28441 ----EQUIPMENT * Fixed tow hitch * Audio system * Seat Package 4 - Partition (with load-through flap), without window (Custom truck base) - Driver's seat, 4-way adjustable (fore/aft, backrest, tilt, height) - Double passenger seat with storage compartment under individually folding seat cushions - Headrests, height-adjustable - Interior armrest for driver - Seat covering: fabric - Partition (with load-through flap), without window * Transmission: 6-speed manual * Anti-lock braking system with electronic brake-force distribution (EBD) * Airbag, driver side * Exterior mirrors, manually adjustable (2) * Battery (80 Ah) * On-board computer with consumption and mileage information (e.g., remaining range) * Roof, flat * Headliner in driver's cabin * Double-wing rear door with 180° opening angle (without window) * Tachometer * Electronic Stability Program (ESP) with Traction Control System (TCS) - Hill start assist - Crosswind assist - Emergency brake assist - Rollover protection * Power windows * Paint: Solid color * Load compartment lighting with activatable delay shut-off - after 30 minutes * Particulate filter: Diesel particulate filter * Headlight low beam with delay shut-off * Sliding door: Sliding door, right * Mud flaps, front and rear * Side protection strips * Power steering * Emergency Brake Assist (EBA) * Seat belts - Seat belt pretensioners and force limiters, front - Warning system for driver's seat belt not fastened * Recirculation mode * Tie-down points - in the load compartment floor * Immobilizer * Heat-insulating glazing, lightly tinted * Central locking with remote control ... and more ----The vehicle is in original condition! Lsdpfx Acszu D H Iefoaf Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: defective spare-parts repository (used), Year of construction: 2009, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: 870420, Electrically heated recirculation oven. Control system is defective. Repair offer is available. The control system needs to be repaired and the seals need to be replaced. Dimensions: width 2700 x length 2500 x height 1200 mm. Usable volume: 7.4 m3. Steam chamber: 10 m3. Heating capacity: 180 kW. Maximum temperature: 600°C. Max. air volume flow: 5000 m3/h. The oven also features a car bottom for loading/unloading and a wide, split door. The oven has seen little use. It is currently dismantled and in storage. Laedpfx Acjxnx E Sjfjf

Condition: used, machine/vehicle number: PST37, Used pasteurizer for tomato juice 400 CPMTechnical Specifications & Performance DataThis BOND four-module tunnel pasteurizer-cooler is designed for the thermal treatment and controlled cooling of tomato juice containers. Built primarily in stainless steel, the machine combines pasteurization and cooling stages on a continuous Intralox plastic mesh conveyor, providing a robust solution for industrial packaging and beverage production applications requiring extended thermal processing.Maximum production speed: For tomato juice 400 containers per minute (24.000 unit per hour) for beer 600 container per minut (36.000 unit per hour).Alternative operating condition: 300 containers per minute ( overhauled, in excellent condition )Thermal length: 27,400 mmUsable width: 3,200 mmUseful processing area: 80 m²Total internal capacity: 22,000 piecesProduct weight used for the thermal calculation: 450 gContainer format indicated: 2.0LAdvanced Automation & Control SystemsThe pasteurizer is supplied with an electrical control panel for management of the thermal treatment and conveyor process. Water tanks, recirculation pumps, heat-exchange equipment and the continuous conveyor are integrated into a coordinated operating system. The design includes recirculating-water circuits serving the pasteurization and cooling sections.Thermal performance data indicate pasteurization water at 95°C, with a cooling-tower temperature difference of 10°C. The documented recirculating-water volume is 80 m³/h, with additional pump references of 65 m³/h and 165 m³/h.Production Line Integration CapabilitiesThis tunnel pasteurizer is suitable for installation in a used bottling line or industrial packaging line where filled containers require pasteurization before downstream handling, labeling or secondary packaging. Its continuous mesh conveyor configuration supports inline product flow between upstream filling equipment and downstream cooling, inspection or packaging machinery.The machine was originally engineered for tomato juice, a product requiring longer pasteurization times and higher pasteurization temperatures than beer. The system can therefore be evaluated for beverage production and food-processing applications with comparable thermal-treatment requirements. The cooling section includes a 20 m² buffer conveyor to support controlled product discharge and line balancing.Machine Condition & Maintenance HistoryPresented as like new and fully operational, the machine is complete with the accessories required for operation. The all-stainless-steel construction supports durability and hygiene in demanding production environments, while the Intralox mesh belt provides continuous container transport through the thermal and cooling zones.Operational Performance & VersatilityAt 400 containers per minute, the maximum documented thermal cycle lasts 55 minutes. Pasteurization represents 25% of the cycle, with 14 minutes at 95°C water temperature, followed by 41 minutes of cooling using cooling-tower water. At 300 containers per minute, a revised 60-minute cycle is indic... Lsdpezvl S Iofx Acfeaf

Condition: used, Year of construction: 2001, center height over bed 500 mm centre distance 6.000 mm bed width 670 mm turning diameter over bed 1.030 mm turning dia. over face-slide 640 mm Max. workpiece weight between centers 5.000 kg Max. workpiece weight between centers (collet) 6.000 kg feed speeds x- and z-axis 6.500 mm/min spindle head ASA 15" spindle turning speed range 4 - 830 U/min Torque 6.224 Nm total power requirement 70 kW weight of the machine ca. 11,3 t Headstock: - Front bearing, inside diameter: 235 mm - Rear bearing, inside diameter: 216 mm - Diameter of hole through spindle: 170 mm Ljdpfx Acezt Szkjfoaf - Morse taper in spindle sleeve: 6 MK Tailstock: - Quill diameter: 150 mm - Quill travel: 400 mm - Quill morse taper: 6 MK Saddle and cross slide: - Torque AC axes drive motors (X and Z): 17/22 Nm - Max. feed force, X and Z (continuously rated): 2500 daN - Recirculating ballscrew diameter X-axis: 40 x 5 mm - Max. travel, X-axis: 650 mm

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. Laodpfjxcnxdox Acfof The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a powerful textile printing machine that offers outstanding print quality, high speed and versatility. It is particularly suitable for textile printing companies that want to produce first-class prints in large quantities (roll-to-roll) on a wide variety of fabrics. To date, it has been used primarily for cotton fabrics: jersey, French terry, cotton woven fabrics, canvas, sweat and viscose & modal qualities. For sale due to business downsizing. The textile printing machine is currently still in operation and can be viewed at any time by appointment. The following are available for sale with the machine: main and backup air compressors, dryer, unwinder & rewinder. So a complete production line. We are also selling all available spare parts, colors, etc. Technical specifications: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, magenta, yellow, black, red, green, gray Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pre-treatment) Print width up to 180 cm Print speed: Up to 200m²/ hour Print modes: Multiple print modes from 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes in interlaced mode Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Lodpfxjvmdw Ij Acfeaf Media transport: High-precision, adhesive belt conveyor system Fabric feed system: Axial unwinding device with adjustable fabric width and Tensioning mechanisms Max media thickness: 15 mm Max roll width 180 cm Max roll outer diameter: 40 cm Max roll weight: 50 kg Compressed air: 6-8 bar/ < 0.4 m³/min

Condition: used, mileage: 257,000 km, power: 125 kW (169.95 HP), first registration: 03/2020, fuel type: diesel, next inspection (TÜV): 03/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,981 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Airbag, passenger side, Airbag, driver side, Trailer Stability Assist (TSA), Trailer socket, 13-pin, Audio/radio remote control on the steering wheel, Radio preparation, 4 speakers, Voice control and Bluetooth interface, Driver assistance system: Emergency call system, FordPass Connect incl. eCall, Smartphone interface (Apple CarPlay & Android Auto), Exterior lights, rear, top, LED, Exterior mirrors, electrically foldable, Window in sliding door, right, fixed, Vehicle without vinyl floor covering in the cargo/passenger compartment, Speed limiter, 130 km/h, Rear wing doors with glazing (opening angle 180 degrees), Rear window, heated, Interior mirror with automatic anti-dazzle function, Cold start package, 2nd battery, Cargo area light, LED, Cargo area partition, plastic with window, Mud flaps, front, Steel rims 6.5x16, Auxiliary heater package 1, Additional heater with timer, Remote control for auxiliary heater / additional heater, 2nd battery Lasdpfx Acszu Dvvjfsf Additional equipment: Storage compartment in the headliner of the cab, Trailer Stability Assist (TSA), Exterior mirrors, electrically adjustable and heated, Indicator in exterior mirror, Floor covering: Vinyl in the cargo/passenger compartment, On-board computer, Entry lights, Electronic brake force distribution (EBD), Electronic traction control, Heater with recirculating air function, Body/structure: High-roof box van, Body variant: Medium-high roof, Steering column (steering wheel) adjustable in height and length, Engine 2.0 Ltr. - 125 kW TDCi CAT, My Key (2nd vehicle key programmable), Parking pilot system, front and rear, Wheelbase 3750 mm, Tyre repair kit, Low emission according to emission standard Euro 6d-TEMP, Gear/selector knob, leather, Windscreen wipers with intermittent function, adjustable, Sliding door, cargo/passenger compartment, right, Mud flaps, rear, Side protection strips, Seat package 13: Driver's seat (4-way adjustable) - passenger double seat, fabric, Seats in the cab: Driver's seat with lumbar support, Start/Stop system, Trend, Rear step integrated, Panelling in the cargo/passenger compartment: high, Panelling in the cargo/passenger compartment: Vinyl, Lashing eyes (10), Roll stability control (RSC), Heat-insulating tinted glass, Additional heater, electric, Second key with folding remote control

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A Lajdpfx Acozgck Nofjf - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.

Condition: used, mileage: 37,511 km, power: 96 kW (130.52 HP), first registration: 03/2025, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,215 mm, next inspection (TÜV): 08/2028, color: white, driver cabin: other, emission class: euro6, number of seats: 7, loading space volume: 8.9 m³, loading space length: 2,550 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, construction height: 2,498 mm, working width: 2,080 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, soot filter, traction control, Navigation via smartphone is possible. Air conditioning, central locking with remote control, electrically adjustable and heated exterior mirrors, electric windows front, hill start assist (HSA), lane keeping assist, driver drowsiness detection, speed control system (cruise control) including speed limiter, multifunction steering wheel, parking assistance system rear, cargo area partition, spare wheel with road tires, all-season tires, light and rain sensor, daytime running lights LED, radio, multimedia system Open R-Link (10-inch touchscreen), Bluetooth, hands-free system, USB interface, Apple CarPlay, Android Auto, tire pressure monitoring system (active), long wheelbase, heat-insulating glazing, storage compartment package, tachometer, airbag driver side, anti-lock braking system (ABS), electronic stability program (ESP), comfort seats, center armrest, driver comfort seat with armrest and lumbar support, start/stop system engine, diesel particulate filter, sliding door load/passenger compartment right, electronic immobilizer, side marker lights, outside temperature display, power steering, wooden cargo floor with interior lining, intelligent speed adaptation (ISA), passenger double seat multifunctional with storage compartment and mobile office, decorative trim below the radiator grille (black), safety system with automatic emergency call (ERA GLONASS / eCall), instrument cluster analog, interior: air vents chrome-look, heater with recirculation, permissible total weight 3.50 t, interior lighting, storage compartments on dashboard (open), preparation for alcohol interlock, socket (12V connection) in center console, tie-down eyes cargo area floor, parking brake manual, wheel covers (Airna), electronic traction control (Extended Grip-Control), drive slip control (ASR), crosswind assist, body/structure: box high-roof standard, wheelbase 4215 mm, drive type: front-wheel drive, transmission 6-speed, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. The listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. We will take your old vehicle in part exchange. Retrofitting options: - Trailer couplings, also up to 3500 kg - Auxiliary heaters - Screen for rear view camera and/or navigation via mobile phone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Retrofitting of a tailgate lift and other individual solutions for your business needs possible for an extra charge. Lajdpfx Acozhrzasfjf