Used Fendt 712 Vario for sale (855)

Condition: used, mileage: 147,717 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2003, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D from government/federal police stock. Equipped as a bus (group vehicle) with a high roof, full air conditioning, and auxiliary heating. Features include ABS, driver airbag, and a differential lock on the rear axle, as well as a retarder – an electrically powered, wear-free eddy current brake used to adjust speed. Before sale, the windshield will be replaced with real glass. Thanks to its excellent insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain in place. In addition, the bases and deflectors of the former roof-mounted rotating beacons will be removed from the roof before sale. The mounting holes will then be permanently sealed by us with metal plates and body filler. Furthermore, before sale, we will dismantle the rear wooden cabinets. This will also create space for a motorhome conversion. Technically, this Vario is in good condition and requires no immediate repairs – it has been meticulously maintained according to the service schedule. During the last service, the engine oil pan was also replaced. All components, including the engine, transmission, and rear axle, are dry. The air conditioning and auxiliary heating are functional and very effective: 1) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2) The auxiliary heating system is a hot water circulation heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to documentation: 120 km/h. A total of 11 seats, with the seats in the passenger compartment designed as reclining armchairs with adjustable backrests and armrests. Furthermore, the left inner seats can be moved inwards towards the center console by approximately 10 cm for more freedom of movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (L x W x H). For an additional cost of €750, we can perform a technical modification to reclassify the vehicle as a motorhome, involving the removal of seats. Due to space constraints, up to 8 seats are possible. In this case, the Vario will also be equipped with a 220V external power connection. The body can be described as being in good condition. There is some corrosion on the lower edges of the rocker panels (left and right) and on the rear door. In our body shop, we can effectively remove the rust spots. Severely corroded areas will be cut out and replaced with new sheet metal. This will be done by our trained bodywork specialists – professionally and invisibly. Subsequently, the repaired areas will be baked in an oven at 60 degrees in the paint booth by trained specialists, up to the next edge. This creates a seamless paint finish that effectively protects against moisture. The rocker panels will also be partially de-rusted from the rear and protected against new corrosion with a special paint coating. Cavities in the treated areas will be preserved with wax. We can offer these body and paintwork services for an additional cost of €3,900. The time required for this will be approximately 4-6 weeks, depending on the workshop's workload. Dcedpozr Ayhofx Akhek However, the Vario would also be roadworthy without these body repairs; it drives well and the transmission shifts precisely. +++ Errors, changes, and prior sale are reserved.

Condition: used, mileage: 574,362 km, first registration: 05/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2006, Front axle: Steered Dodpfxozq Ei No Akhsck Rear axle: Double-tired Engine displacement: 4,250 cc GVWR: 7,500 kg Please contact Thierry Leemans for further information.

Condition: new, Year of construction: 2026, Swing over bed 290 mm Swing over cross slide 185 mm Distance between centers 750 mm Bed width 180 mm Spindle bore 38 mm Spindle taper MT5 Number of spindle speeds 2 Spindle speed range 75–500 / 300–2000 rpm Number of metric threads 18 Metric thread range 0.2–3.5 mm Number of inch threads 21 Inch thread range 8–56 TPI Cross feed range 0.017–0.25 mm/rev Longitudinal feed range 0.07–0.72 mm/rev Tool post type: 4-position quick-change Maximum upper carriage travel: 80 mm Maximum cross carriage travel: 150 mm Maximum longitudinal slide travel: 700 mm Tailstock quill travel: 80 mm Tailstock quill taper: MT3 Main motor power: 2.4 kW Maximum drilling diameter: 20 mm Maximum face mill diameter: 63 mm Maximum end mill diameter: 20 mm Spindle speed: 50–2250 rpm Spindle taper: MT2 Head tilt range: -90° to +90° Dcjdpfxezr Iytj Akhok Head height adjustment: 260 mm Milling head motor power: 750 W Lathe stand/stand included SINO DRO 2 digital position readout Axles KIFES Toolholders Set of 7 turning tools 16 x 16 mm with folding inserts MK3 live center Fixed telescope (included) Movable telescope (included) 4-jaw chuck 160 mm Set of safety guards (CE compliant) Set of change gears (included) Reduction sleeve (included) Maintenance wrenches (included) Oil can (included) Length 1500 mm Width 750 mm Height with stand 1100 mm Weight with stand 360 kg A larger 320 x 1000 VARIO model is available - price €3200 net.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 585 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 320 mm, total height: 2,245 mm, total width: 1,340 mm, total length: 1,140 mm, table width: 240 mm, table length: 1,000 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 100 rpm, overall weight: 1,000 kg, working range: 650 mm, input voltage: 400 V, distance table to spindle center: 370 mm, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Drilling capacity in steel ----- 50 mm Milling capacity in steel ----- 25 mm Face milling capacity ----- 100 mm Longitudinal travel (X) ----- 585 mm Transverse travel (Y) ----- 185 mm Vertical travel (Z) ----- 320 mm Horizontal motor ----- 1.5 KW Vertical motor ----- 2.2 KW Horizontal milling spindle ----- 60 ~ 1350 rpm (9) Dedpfx Aksga Twfjhock Vertical milling spindle ----- continuously variable 100-600 / 350-2000 rpm Spindle mount ----- ISO 40 Table ----- 1000 x 240 mm Weight ----- 1000 KG INCLUDED * DELTA frequency inverter * 3-axis digital readout SINO * Automatic longitudinal and transverse feed of the worktable * LED lighting * Cooling system * Deluxe control cabinet * Tilting milling head left/right 0 - 45 degrees * Rotating worktable * Various holders in a case

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, model year 2021, from the premium manufacturer Rational (successor to the VCC 211). Dcodjzrfbhspfx Akhjk !!! Price upon request !!! Our in-house workshop has performed a fresh inspection, and the iVario L is in top condition. The offer does not include any accessories, but these can be purchased for an additional charge. The list price for this unit is €20,340 net = €24,204.6 gross. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21108058335 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional. Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and sweet dishes, soups and sauces, or the 5 cooking methods: boiling, frying, deep-frying, braising, and finishing. iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated Wi-Fi interface, e.g. for connection to ConnectedCooking. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are only made in accordance with our general terms and conditions (GTC).

Condition: used, Year of construction: 1998, material width 100 - 450 mm material thickness 1,0 - 14,0 mm coil weight 10,0 t coil internal diameter 470 - 520 mm coil external diameter 1100 - 2000 mm no. of straightening rolls 12 straightening roll diameter 2x70 / 2x96 / 8x127 mm number of draw-in rolls 2 inlet roll diameter 160 mm min. material width 100 mm speed 15 m/min power requirement 75,0 kW weight of decoiler 6,4 t weight of straightening machine 12,8 t dimensions decoiler (WxDxH) 3,1 x 1,4 x 3,7 mm dimensions straightener (WxDxH) 2,5 x 3,4 x 2,7 mm Straightening machine RMS Vario-12-70/96/127-450 with infinitely variable drive, driven straightening rolls, supporting rolls, upper straightening cassette hydraulic liftable, hydraulic threading wedge Decoiler HES 12-650 with infinitely varieble insertion drive, pneumatic lag brake, hydraulic snubber roll (motoric driven), hydraulic centralized expansion hydraulic coil lifting device hydraulic loop bridge Dsdpfx Ajzrpr Dekhsck coil loop control via ultrasonic cropping shears HSO 150-0450 working direction from left to right as is where is, WITHOUT putting into operation - Video at seller's site before dismantling available

Year of construction: 2014, condition: good (used), Approx. 10-20 scissor lift platforms, Kleu – used: Price per unit, ex works: €150.00 (net)! Manufacturer: Kleu Podest Type: Vario Standard Year of manufacture: unknown Dimensions: approx. 2m x 1m Load capacity: 750 kg/m2 Variable height adjustment Height: approx. 1m Operation: Rotate the platform. Press the locking levers on the underside together. Adjust the scissors to the desired height. Release the locking levers. Condition: good Dcjdpfx Akszq Abpshsk Available: from approx. Q4/2026 Location: Hamburg

Condition: used, maximum load weight: 32,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, Vehicle Description: Kögel S24-1 Cargo, Lifting Axle, BPW ECO Axles Air Compact, Edscha sliding roof, side curtains, mounted on both sides: Steel pallet stop strips with VarioFix hole pattern (bolted), VarioFix slotted frame, on both left and right sides in the direction of travel, for internal width 2,468 mm (loading height under outer rail is reduced by approx. 20 mm). Axle lift mechanism on axle 1, fully automatic, load-dependent axle lift control. Start assist: activation by pressing the brakes three times, 30% overload allowed up to a speed of 25 km/h. Plastic toolboxes EBS system 2S/2M with stability control program (includes ABS/ALB function). IDEM Telematics System BasicTrailer incl. GPS location monitoring, coupling status, EBS data. - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". Technical Data: Permissible total weight: approx. 39,000 kg Basic equipment unladen weight: approx. 5,920 kg Unladen weight of customized vehicle configuration: approx. 6,333 kg Bed length (internal): approx. 13,620 mm Bed width (internal): approx. 2,480 mm Rear through-loading width: approx. 2,480 mm Loading height unladen, level travel position: approx. 1,220 mm Loading height laden, level travel position: approx. 1,190 mm Vehicle height set at 290 mm Side through-loading height (internal): approx. 2,680 mm Height under roof (internal): approx. 2,760 mm Front overhang (ISO 1726): approx. 1,685 mm Front overhang radius (ISO 1726): approx. 2,040 mm Rear swing radius (contrary to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift mechanism on axle 1, fully automatic and load-dependent. Start assist via triple brake actuation, 30% overload up to 25 km/h. BPW ECO Axles Air Compact assembly with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm lift. Tyres: 6 x 385/65 R 22.5 tyres, 160J (European brand of Kögel's choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Tarp: Tarp rope with two holders on the front wall Sliding tarp, quality approx. 900g/m², with over-center tensioning system, according to DAIMLER cargo securing standard (DL 9.5). Documents: - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,330 kg Max payload: 32,670 kg Axle configuration: 3 Wheelbase: 6,390 mm Loading length: 13,620 mm Loading width: 2,480 mm Loading height: 2,710 mm First registration: 03/2019 Suspension: Air Color: Silver Tire size: 385/65R22.5 Features: ABS, EBS, Telematics Djdpfx Akjzq Hckoheck A complete equipment list is available on request. Despite utmost care, errors in this advert cannot be excluded. Subject to prior sale and errors. Please request more information.

Condition: used, first registration: 04/2025, Year of construction: 2025, Equipment: ABS, Kögel MEGA S24 MEGA, lift axle on the 1st axle, lifting roof, Vario Loch-FIX frame, BPW axles, pallet stop strips left and right, sliding curtain sides, sliding roof cover, toolbox, 1st owner, as new condition. Permissible kingpin load: 12,000 kg Technical possible kingpin load: approx. 12,000 kg Permissible axle load: 24,000 kg (8,000 kg per axle) Technical possible axle load: approx. 27,000 kg (9,000 kg per axle) Permissible total weight: 36,000 kg Technical possible total weight: approx. 39,000 kg Unladen weight, basic equipment: approx. 6,130 kg Unladen weight, individual configuration: approx. 6,582 kg Theoretical payload: approx. 29,418 kg Floor load capacity according to DIN EN 283 with test axle load 7,200 kg (A) Wheelbase: approx. 6,390 mm (A1) Axle spacing: approx. 1,310 mm (A2) Axle spacing: approx. 1,310 mm (D) Overall length: approx. 13,950 mm (E) Overall width: approx. 2,550 mm (F) Internal loading length: approx. 13,620 mm (G) Internal loading width: approx. 2,480 mm (G2) Rear through-loading width: approx. 2,480 mm Tire size: 445/45R19.5 (H1) Loading height unladen, driving position level: approx. 1,020 mm (H2) Loading height laden, driving position level: approx. 990 mm (H3) Achievable dock height at rear with kingpin height 910 mm, loaded, raised: approx. 1,200 mm Ride height set to 265 mm. (K) Side through-loading height, internal: front approx. 2,735 mm - 2,860 mm [adjustable by 5x25 mm], rear approx. 2,810 - 2,860 mm [adjustable by 1x50 mm] (K1) Height under roof, internal: front approx. 2,875 mm - 3,000 mm [adjustable by 5x25 mm] | rear approx. 2,950 mm - 3,000 mm [adjustable by 1x50 mm] (X1) Overall height unladen, driving position level: = H1 + K + T +/- body height adjustment | = S + P + K + T +/- body height adjustment (X2) Overall height laden, driving position level: = H2 + K + T +/- body height adjustment Superstructure settings: The “Mega” superstructure design allows a height adjustment of 5x25 mm at the front and 1x50 mm at the rear. The relevant heights (total height, lateral through-loading height, internal height) change accordingly depending on the selected body setting. (T) Roof construction height, side: approx. 180 mm. Due to the design of the roof beam, the internal pallet-width height corresponds to the specified internal height under the roof. (N) Front overhang (according to ISO 1726): approx. 1,685 mm (N1) Front overhang radius (according to ISO 1726): approx. 2,040 mm (O) Rear swing clearance (according to ISO 1726): approx. 2,300 mm (P) Construction height above king pin: approx. 90 mm (S) Possible kingpin height unladen: approx. 930 - 1,060 mm, horizontal at approx. 930 mm (Pay attention to overall height!) Dedpfszq Hbtex Akheck Braking system in accordance with ECE-R13 Electrical system in accordance with ECE-R48 Wabco brakes, air suspension BPW triple-axle assembly ECO Air with disc brakes Ø 370 mm, ET 120, 260 mm air suspension stroke. 6 x 445/45 R 19.5 tires Pallet stop strips made of steel with VarioFix hole pattern (bolted), left and right in the direction of travel Vario Fix steel-perforated outer frame with 3 pairs of stanchion sockets Mechanical/hydraulic lift mechanism, lift height from lowest position approx. 500 mm/600 mm, 4 operating levers at each corner stanchion. Complies with safety regulations according to BGV D 29. (Lifting roof can only be operated with doors open!) Load securing certificate according to EN 12642 XL (VDI 2700). Road transport only. "Daimler load securing DL 9.5" certificate

Condition: used, mileage: 261,222 km, first registration: 08/2005, Year of construction: 2005, Vario 614 D-KA RUTHMANN K130 Aerial Work Platform 13 m Working Height • Power steering • Manual transmission • Differential lock • Beacon light • Headlight range adjustment • Engine displacement: 4,249 cm³ • Output: 100 kW / 136 hp • Double bench seat • Empty weight: 5,220 kg Djdpfx Aswmn Ucekhsck • Gross weight: 5,990 kg • Tires: 215/75 R 16 C • Overall good to very good tire tread! • Vehicle dimensions: 7,540 x 2,210 x 3,600 mm (LxWxH) RUTHMANNSTEIGER Superstructure Type 130 • Year of manufacture: 2005 • 4-point outrigger support • 13 m working height • 200 kg load capacity • 5° tilt • Remote control / cable • Emergency stop: cabin, driver’s cab and basket! - Ready for operation! - One owner! - German vehicle! . TÜV / inspection: new! Errors and interim sale excepted! = Further information = Damages: none

Condition: used, maximum load weight: 22,755 kg, overall weight: 29,000 kg, axle configuration: 2 axles, first registration: 09/2017, next inspection (TÜV): 11/2026, loading space length: 13,200 mm, loading space width: 24,800 mm, loading space height: 3,000 mm, total length: 13,886 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, Schmitz Cargobull SCS 18/L ?PR+PL ? VARIO-SYSTEM ? MEGA ?----VEHICLE HISTORY 1ST HAND GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----VEHICLE* Schmitz flatbed/curtain-sided semi-trailer * Volume semi-trailer * 2 axles * Varios body VEHICLE HISTORY* German vehicle * Well-maintained condition * Video available upon request BODY & CURTAIN* Sliding curtain * Edscha sliding roof * Schmitz Safety Roof Safety System CHASSIS & AXLES* Schmitz axles * Disc brakes * Air suspension DIMENSIONS* Internal length: approx. 13.20 m * Internal width: approx. 2.48 m * Internal height: 3.00 m VARIOS SYSTEM* Internal height can be increased by up to 30 cm TIRES* Tire size: 385/55 R22.5 * Very good tires ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ----EXPORT REGISTRATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS REGISTRATION, AND 17-21 DAYS AUSTRIAN REGISTRATION EURO 1 Dcedpfx Aszqxdtekhek VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a deposit/guarantee of at least ¤ 500.00 / ¤ 1000.00 will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our homepage: Sales are made exclusively according to our general terms and conditions – see homepage. Important note – important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it provides information for initiating a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 2020 Jansen C6246-1500 Vario Dodpfxsznlyis Akheck

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, feed length X-axis: 445 mm, feed length Y-axis: 195 mm, feed length Z-axis: 415 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 75 rpm, quill stroke: 125 mm, table width: 240 mm, table length: 800 mm, Warco Milling Machine Model: Super Major Vario Year: 2018 Table Area: 800 x 240mm Long Travel: 445mm Cross Travel: 195mm Vertical Travel: 415mm Dsdozlhtmspfx Akhock Quill Stroke: 125mm Spindle Taper: R8 Spindle Speed: 75 – 2500 RPM Machine With: Vice Dividing Head Some Tooling Stand Digital Readout Dimensions: 1270 x 930 x 2670mm High Weight: 500 KGS

Condition: used, mileage: 165,565 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 05/2003, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, formerly owned by a government agency/federal police. Configured as a bus (group vehicle) MR / high roof, with full climate control and auxiliary heater, ABS and differential lock on the rear axle, as well as a retarder, which is an electric, wear-free eddy current brake for adjusting the speed. The body is in good condition; only minor paint repairs have been carried out on the exterior. The lower rocker panels are clean and free of rust. The windshield is new and made of real glass. Dedpfszqibvex Akheck A comprehensive inspection has been performed, including a brake fluid service, lubrication, and replacement of the air dryer cartridge. We have also replaced the front brake pads. Technically, this Vario is in good condition and does not require any immediate repairs; it has been regularly serviced according to the service schedule. Both starter batteries have already been replaced. Thanks to the good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain in place. The air conditioning and auxiliary heater are functional and very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulation heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to the vehicle documents: 120 km/h. A total of 11 seats, with the seats in the passenger compartment designed as reclining armchairs, with adjustable backrests and armrests. Furthermore, the left inner seats can be moved approximately 10 cm forward on the console for more freedom of movement. A total of three effective roof vents. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (L x W x H). For an additional cost of €750, we can carry out a technical modification to convert it into a recreational vehicle (RV) by removing some seats. Due to space constraints, a maximum of 8 seats are possible in this configuration. In this context, the Vario will also be equipped with a 220V external power connection. +++ Errors, changes and prior sale are reserved.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Dedjzbnl Ajpfx Akhock Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: as good as new (ex-display), Year of construction: 2019, bore capacity in steel (diameter) 35,0 mm bore capacity in cast iron 40,0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2.170 mm 2019 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard Dcedpfjxaabrsx Akhsk - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: used, mileage: 138,655 km, power: 100 kW (135.96 HP), first registration: 10/2005, fuel type: diesel, overall weight: 5,990 kg, next inspection (TÜV): 08/2028, color: orange, gearing type: mechanical, emission class: euro4, Year of construction: 2005, Equipment: air conditioning, Internal vehicle number: G300104 Available immediately at our yard in Kaufungen. More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) VIDEO: TV inspection system RCA RAUSCH ELKA 600 Year of manufacture: 5 See full equipment details in the pictures and video. Financing example: * Internal number: G300104 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. Dsdjzpcw Iopfx Akhsck We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, mileage: 217,170 km, power: 130 kW (176.75 HP), first registration: 02/2010, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 08/2028, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Internal vehicle number: G300103 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) VIDEO: Sewer cleaning vehicle with 2,875 operating hours Rockstroh Dran Jet 100 Year of construction: 2010 Pump performance 91 l/min - 150 bar 115 l/min - 120 bar 128 l/min - 160 bar* 120 l/min - 180 bar* 106 l/min - bar* 92 l/min - 210 bar* *only for van body High-pressure system Half-side positioned high-pressure unit Safety, overflow, and pressure relief valve 1.5" water filter Pump drive Auxiliary drive vehicle (van) Hydraulic (van or box body) Hose reels 1 x 80/100/120m DN10/13 1 x 80m DN16/19 1 x 40m water filling reel 3/4" Financing example: * Internal number: G300103 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € Dodpfx Akozpcwzjheck If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, Year of construction: 2026, CORMAK TYTAN 210 × 400 VARIO Universal Conventional Lathe (230 V) The CORMAK TYTAN 210 × 400 VARIO 230 V is a compact universal conventional metal lathe designed for precision machining in workshops, toolrooms, maintenance departments, and small manufacturing facilities. Featuring infinitely variable spindle speed control, a rigid machine construction, and extensive threading capabilities, it delivers excellent machining accuracy and everyday operating convenience. It is a reliable conventional lathe suitable for single-piece production, maintenance work, and prototype manufacturing. Powered by a 750 W motor combined with an electronic variable-speed drive, the machine provides smooth and stable performance even when machining demanding materials. The spindle speed range of 50–2,500 rpm allows operators to select the optimum cutting speed for both rough turning and precision finishing operations. Key Features Infinitely variable spindle speed from 50 to 2,500 rpm 750 W / 230 V motor providing smooth and reliable operation Rigid machine construction for high machining accuracy 4-way tool post for quick and convenient tool changes Capability to cut both metric and imperial threads MT3 spindle taper with 21 mm spindle bore Forward and reverse spindle rotation for increased versatility Hinged spindle safety guard for improved operator protection Integrated chip tray for easy cleaning and maintenance Standard Equipment 3-jaw self-centering chuck Internal and external chuck jaws Change gears for thread cutting MT2 dead center Oil can Chip tray Chuck key and tool post wrench Open-end wrenches and hex keys Spare fuses Operating manual CE Declaration of Conformity Optional Equipment Lathe stand 4-jaw independent chuck Tool holders Live centers Turning tools Tailstock drill chucks Technical Specifications Specification Value Swing Over Bed 210 mm Swing Over Cross Slide 135 mm Distance Between Centers 400 mm Bed Width 100 mm Spindle Bore 21 mm Spindle Taper MT3 Spindle Speed Control Variable Spindle Speed Range 50–2,500 rpm Metric Threads 14 Metric Thread Range 0.3–3 mm Imperial Threads 10 Imperial Thread Range 10–44 TPI Longitudinal Feed Range 0.089–0.198 mm/rev Tool Post Type 4-way Compound Slide Travel 65 mm Cross Slide Travel 80 mm Carriage Travel 276 mm Dcsdpfjzqzi Ejx Akhek Tailstock Quill Travel 50 mm Tailstock Taper MT2 Main Motor (S1/S6) 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Machine Length 900 mm Machine Width 400 mm Machine Height 1120 mm Weight (with stand) 63 kg

Condition: new, Year of construction: 2026, CORMAK HK25 VARIO is a compact milling and drilling machine designed for versatile applications. Ideal for both hobby users and professionals, this machine combines compact dimensions with exceptional functionality. Equipped with an MT3 spindle taper, it provides excellent stability and machining precision. The digital spindle speed display allows precise control of the machining process, ensuring excellent results. Machine features Digital spindle speed display Drill chuck with arbor Digital drilling depth display Smooth spindle speed adjustment Precision-mounted spindle bearings Technical specifications Parameter Value Drilling capacity 20 mm End milling capacity 16 mm Face milling capacity 63 mm Spindle taper MT3 Spindle stroke 50 mm Number of spindle speeds Variable Spindle speed range 50–2250 rpm Working table surface 700 × 180 mm Maximum longitudinal table travel 480 mm Maximum cross table travel 175 mm Maximum vertical head travel 280 mm Number of T-slots 3 T-slot dimensions T12 / 12 mm Motor power 0.75 kW / 1 HP, 230 V Dimensions 980 × 600 × 1010 mm Weight 110 / 125 kg Optional equipment Rotary vices Tilting vices Precision vices Rotary tables Dividing heads Tapping heads Milling heads End mills (HSS, HSSE, HSS-PM, carbide) Cylindrical shank drills Taper shank drills Milling inserts Hand and machine taps Clamping element sets Dcjdpfetz Sxlsx Akhsk Tool holders (for collets, Weldon) Drive arbors Drill chucks

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Dsdpfoznh Nmjx Akhjck Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 10 h, Kilia 65 Liter Meister Plus Vario Condition: Factory Refurbished Warranty: 6 months manufacturer's warranty Manufacturer: Kilia General Description The Kilia 65 L Meister Plus Vario is a high-performance universal cutter for the production of fine and coarse sausages, emulsions, as well as vegetarian and vegan products. The machine is made entirely of stainless steel and meets the highest hygienic and technical requirements. By using modern, energy-saving frequency converters in the drive technology, the machine enables precise control of the speeds while simultaneously reducing energy consumption – ideal for economical and sustainable production. Cutter Head Features: 6 blades Cutter Features: Infinitely adjustable blade shaft drive: Forward rotation: 50–5100 RPM Reverse rotation (mixing mode): 50–500 RPM Bowl drive: 7–20 RPM Electronic central lubrication for blade and disc shaft bearings Noise protection cover and blade cover, manually operated, stainless steel Electric blade shaft brake Temperature-dependent cut-off Speed counter cut-off Operation: Touch display with splash protection flap Operation: Button panel Drive power, blade shaft: 22 kW, 400 V (frequency converter controlled) Djdpjzcuzmofx Akhsck Drive power, bowl: 1.5 kW, 400 V (frequency converter controlled) Integrated online service module for remote maintenance Dimensions and Weights Weight: 850 kg Dimensions: Diameter 1150 mm, Height 1160 mm, Height with blade cover open 1510 mm Scope of delivery Kilia 65 L Meister Plus Vario, cleaning brush, scraper Technical documentation

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Kilia Bowl Cutter 50 Litres Meister Plus Vario with Hand and Knee Operation Condition: Factory reconditioned with 6 months warranty. Dcjdpfx Akjzcux Sshsk The Kilia 50 litre Meister Plus Vario is a powerful universal high-speed bowl cutter for the production of fine and coarse sausage products as well as many other products. The machine impresses with its compact design, high-quality stainless steel construction and modern, infinitely variable drive technology for precise mixing and cutting. The machine is equipped with a 6-knife head, infinitely variable knife shaft drive with forward and reverse operation, infinitely variable bowl drive, electric knife shaft brake, temperature cut-off, revolution counter with automatic stop, central lubrication for the knife shaft and plate shaft bearings, as well as a 7-inch touch display as an alternative operating solution. In addition, the machine features hand control and knee control for particularly practical and ergonomic operation. The noise protection cover is included, and the knife cover is manually operated. An electric knife cover drive is optionally available. Technical Data: Bowl volume: 50 l Capacity: approx. 35 kg Knife speed mixing/cutting: 50 to 5,100 rpm Reverse knife shaft operation: 50 to 500 rpm Knife tip speed: up to 97 m/s Bowl speed: 7 to 20 rpm Knife drive: infinitely variable Bowl drive: infinitely variable Time/revolution cut-off: yes Temperature cut-off: yes Central lubrication: yes Remote control: yes Touch control / hand control / knee control: yes / yes / yes Hydraulic knife cover drive: – Hydraulic ejector: – Manual ejector: – Recipe manager KPV: optional Scale: optional Standard Electrical Data: Knife shaft drive power: 12 kW Bowl drive power: 1.5 kW Voltage: 400 V Frequency: 50 Hz Customer-side pre-fuse: 32 A

Condition: new, Year of construction: 2026, CORMAK TYTAN 220x750P VARIO 230V is a modern universal conventional lathe designed for precision metalworking in workshops, maintenance departments, manufacturing facilities, and training centers. Featuring variable spindle speed control, a powerful 1100 W motor, and a robust cast iron construction, this machine delivers excellent machining accuracy, ease of operation, and consistent repeatability. It is a versatile metal lathe ideally suited for both one-off production and small-batch manufacturing. Key Features Variable spindle speed from 50–2500 RPM allows optimal adjustment of cutting parameters for different materials and machining operations. 1100 W / 230 V motor provides reliable performance even during intensive use. LCD display enables continuous monitoring of spindle speed. Hardened bed guideways ensure long service life and maintain high carriage accuracy. Automatic longitudinal feed improves machining consistency and reduces production time. Metric and imperial threading, including both right-hand and left-hand threads. 38 mm spindle bore accommodates longer workpieces and bar stock. Compact design maximizes workshop space without compromising functionality. Construction and Technology The machine body is manufactured from high-quality cast iron, effectively absorbing vibrations generated during machining. This provides excellent stability and precision, even when machining harder materials. The 100 mm wide bed is equipped with hardened guideways to ensure long-term accuracy and wear resistance. The spindle is mounted on precision tapered roller bearings and features an MT5 spindle taper with a 38 mm through-bore. The electronic variable speed control eliminates the need for frequent belt changes, significantly improving operator efficiency and reducing setup time. Standard Equipment Coolant tray 125 mm 3-jaw chuck Fixed steady rest Follow rest Change gears MT2 and MT4 dead centers Oil can Chip tray Chuck key and tool post wrench Complete service tool kit CE-compliant safety guards User manual CE Declaration of Conformity Note: The lathe is supplied without a stand. Technical Specifications Working Capacity Specification Value Swing over bed 220 mm Swing over cross slide 140 mm Distance between centers 750 mm Dedpew H Rausfx Akhsck Bed width 100 mm Headstock Specification Value Spindle bore 38 mm Spindle taper MT5 Spindle speed control Variable Spindle speed range 50–2500 RPM Feed and Thread Cutting Specification Value Metric thread pitches 12 Metric thread range 0.4–3.5 mm Imperial thread pitches 12 Imperial thread range 8–44 TPI Longitudinal feed rate 0.15–0.25 mm/rev Carriage Specification Value Top slide travel 65 mm Cross slide travel 80 mm Longitudinal carriage travel 700 mm Tailstock Specification Value Tailstock quill travel 50 mm Tailstock taper MT2 General Specification Value Main motor 1100 W / 230 V / 50 Hz Maximum tool size 16 mm Length 1260 mm Width 400 mm Height 1300 mm Weight (with stand) 80 kg The machine is supplied without a stand.

Condition: new, Year of construction: 2026, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Technical Specifications LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Dcsdpfxsw H Rdme Akhsk Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Wrenches, grease gun, maintenance tools CE-compliant safety guards