Used Finken Vh 8-1000 for sale (42,047)

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Nwsdpfxoww I Tmo Adroi

Condition: good (used), functionality: fully functional, Möller Hacker / impact shredder / secondary shredder. Infeed width 835 mm. Infeed opening 310 mm. Rotor diameter 500 mm. 72 hammers. Screen perforation 16 mm. Drive motor 30 kW. Hopper with angled feed or top feed. Insensitive to foreign objects. Nwsdpfx Adjxl Uiusrsi Ideal for waste in sawmill basements.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Nwedpfxsyxxmge Adrsi Just set it up, plug it in, and let it run…

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 1,000 kg, mesh size: 50,100 mm, 300 x wire mesh decking for pallet racking (Euro pallets) approx. 88 cm x 110 cm, galvanized Load capacity 1,000 kg (with evenly distributed load) For beams 182.5 cm + 270 cm long with 4 cm beam thickness Shipping / Delivery: - max. 7 business days after receipt of payment - delivered free to site / installation location - Unloading from truck to be carried out by the buyer using their own lifting equipment Nedpfxoyzb Acs Adrewi - Deliveries within the entire territory of Germany, excluding islands! Deliveries to EU countries by individual arrangement.

Year of construction: 1981, condition: used, machine/vehicle number: 23066, temperature: 0 to +120°C usable space: width 1000 mm depth 950 mm height 800 mm electrical connection: 380 V, 9,5 kW space needed: 1730 x 2330 x 1980 mm high Njdpfe Dqz Rjx Adrowi weight approx. 1000 kg

Condition: used, Year of construction: 2004, x-travel 1600 mm y-travel 920 mm z-travel 900 mm table surface area 1800x700 mm T-slot - distance 120 mm Table load 3000 kg spindle taper ISO 50 power capacity 22/30 kW spindle turning speed range 60-3000 U/min Magnetic clamping plate can be purchased optionally The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Nwodjyt R E Nepfx Adrji About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: - Clamping area approx. L 900 x W 600 mm - Table height 480 mm - Circumferential water channel Nwodpfx Ajhii R Dodrei - 3 T-slots M 16, L 900 mm - Side mounting plate - Space required: L 1000 x W 760 x H 480 mm - Weight approx. 300 kg

Condition: new, Stackable galvanized crate with front flap and lid 1000 x 800 x 500 This lockable metal storage crate with lid and half front flap is made from hot-dip galvanized steel (note: the lid is electrolytically galvanized, not hot-dip). This ensures a long service life as rust cannot affect the steel panels of the crate itself. The crate is equipped with four lifting eyes. Thanks to these lifting eyes, the lockable storage bin can easily be moved using a crane (note: this crate is not certified for lifting operations!). Additionally, these crates are very stackable and easy to move with a forklift truck. Specifications for storage crate with lid: Capacity: 192 litres 4 lifting eyes (note: this crate is not certified for lifting operations!) Stackable Completely lockable Hot-dip galvanized crate body Njdpow Nigqefx Adrowi Electro-galvanized lid

Year of construction: 2018, condition: reconditioned (used), Conveyor belts Belt width 650 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm. Length over 70 m Nsdeu N Ndvspfx Adrjwi Optional service aisles Rollers Motor

Condition: new, turning length 1000 mm turning diameter 380 mm turning dia. in gap 490 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 120 mm total power requirement 1,5 / 2,2 kW Nedjxabv Rjpfx Adrowi weight of the machine ca. 575 kg. range L-W-H 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame with drawers - Operating tools

Condition: new, turning length 1000 mm turning diameter 360 mm turning dia. in gap 480 mm spindle bore 51,0 mm turning speeds 70 - 2000 U/min bed width 185 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 110 mm total power requirement 1,5 kW weight of the machine ca. 540 kg. range L-W-H 1920 x 750 x 1600 mm Nwsdpjxaawaefx Adroi Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Base frame - Operating tools

Condition: used, mileage: 42,400 km, power: 375 kW (509.86 HP), first registration: 01/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,720 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Arocs 2851 6x2-4 Wiedemann Super 1000 8.0/4.0/1.0-320, Water Recovery System Body: * Wiedemann enviro tec * Super 1000 8.0/4.0/1.0-320 Water Recycling System * 15,000-liter tank capacity * 500 liters fresh water * 4,000 liters jetting water * 8,000 liters sludge volume * Tank emptied by hydraulic tilting, 45° Vacuum System: * Wiedemann & Reichhardt KW 4000 * approx. 4,000 m³/h * approx. 25 m suction hose DN 150 High-Pressure System: * Uraca P3-45-65 approx. 413 l/min at 175 bar * approx. 180 m high-pressure hose DN 32 Nwsdpfsvh H Rtjx Adroi * Hydraulic hose reel with approx. 80 m DN 13 Additional Freshwater System: * Speck NP 25/50-150 approx. 50 l/min at 150 bar * Spring-loaded hose reel with 15 m pressure hose DN 10 Special Features: * Sludge tank made of material 1.4301 (stainless steel) * Retraction system for suction and HP booms (300 mm shorter) * Anchorage point for fall arrest device * 5-liter warm water hand wash unit * Stainless steel toolbox * Operator cabinet with display * Engine start controllable from operator cabinet * NMV start controllable from operator cabinet * Radio remote control with display * Equipment cabinet with two roller shutters (both sides) * Large heated wardrobe with roller shutter * Hose storage tray * Extended acoustic insulation for pump compartment * LED working lights * Central lubrication system Technical Data: * Unladen weight: 19,505 kg * GVW: 26,000 kg * Length: 10,170 mm * Height: 3,720 mm * Width: 2,550 mm Special Equipment: Axle load measuring system, front axle load 9.0 t, digital radio DAB/DAB+, passenger side mirror with maneuvering position, 220 Ah battery, interactive multimedia cockpit, electrical pre-installation in cab 24V/100A, driving assistance system: high-beam assist and cornering light, driving assistance system: traffic sign recognition, cab: movable entry, front suspension 9.0 t, 4-leaf, remote online query function, vehicle without trailer brake, vehicle without trailer coupling, speed limiter, 16-speed transmission - Type: G 280-16, transmission-independent gearbox lock, rear axle crown wheel 300, 3-piece mudguard, 3-piece mudguard with splash guard, 510 L aluminum fuel tank, right side, cooling box/refrigerator, cooling capacity for hot climates, reinforced engine brake, steered trailing axle 9 t, liftable, navigation system, PTO - smooth flange, PTO transmission-independent and clutch-dependent MB 1.2, PTO MB 131-2c, programmable special module, wheelbase version 4200 mm, frame overhang 1650 mm, rain sensor, acoustic reversing warning and external hazard warning light, extra remote control keys (2), circuit breaker, seat cover/upholstery: passenger seat velour, seat cover/upholstery: driver seat velour, cab seats: armrests both sides passenger seat, cab seats: comfort suspension passenger seat, cab seats: comfort suspension driver seat, exterior sun visor, additional 12V socket, additional 24V/25A socket in passenger footwell, additional 24V socket in passenger footwell, pre-wiring for 4 surround cameras (display in central monitor), pre-wiring for additional spotlights, twin plate clutch, transmission oil cooler For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Specifications subject to change, prior sale, and errors excepted.

Condition: ready for operation (used), Year of construction: 2004, One shredder is available, blade width: 3x 46mm, power: 30kW. Nodpfx Adeh A Rquerjwi

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Technical data: Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Nwedex Itamspfx Adroi Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025-09/2404095, turning diameter over cross slide: 224 mm, spindle bore: 51 mm, center height: 180 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,680 mm, total height: 1,400 mm, TECHNICAL DATA: Centre distance: 1000 mm Centre height: 180 mm Swing diameter over bed: 360 mm Swing diameter over cross slide: 224 mm Swing diameter without gap bridge: 502 mm Gap bridge length: 235 mm Cross slide travel: 170 mm Top slide travel: 95 mm Max. turning tool cross section: 16x16 mm Chuck mounting: D1 - 4 Spindle mounting (lathe spindle): MT 6 Spindle bore: 51 mm Spindle speed: 70 - 2000 rpm Number of speed ranges: 8 Longitudinal feeds: (32) 0.052 - 0.392 mm/rev Cross feeds: (32) 0.014 - 0.380 mm/rev Metric thread pitch: (26) 0.4 - 7 mm Metric module threads: (26) 0.4 - 7 mm Inch threads, TPI: (34) 4 - 56 TPI Inch module threads, TPI: (34) 4 - 56 TPI Nedpfx Adjxykaferewi Leadscrew pitch: 4 mm Leadscrew diameter: 32 mm Quill mounting: MT 3 Quill diameter: 32 mm Quill travel: 100 mm Motor power: 1500 W Coolant pump: 40 W Electrical connection: 400/50 V/Hz Total length: 1680 mm Total height: 1400 mm Weight: 520 kg Standard accessories: - RÖHM 3-jaw chuck Ø 200 mm - 4-jaw faceplate chuck Ø 200 mm - Face plate Ø 320 mm - 2 fixed centre points - Live centre MT 3 - Travelling steady - Fixed steady - Quick-change tool post set ME - Thread dial and change gear set - Halogen machine lamp - Emergency stop button / No-voltage release - Chuck guard with safety switch - Machine base / chip tray / splash guard - Tool kit / operating manual / CE

Condition: excellent (used), functionality: fully functional, power: 735.5 kW (1,000.00 HP), Year of construction: 2015, Oil drilling rig National 80 UE 1000 HP Nwjdpfx Aox Nc Ddjdroi Year of manufacture: 2015 Fully operational

Condition: not inspected (used), Year of construction: 2008, functionality: limited functionality, Model/Type: Erdwich M480/3-1000 Serial No.: 1896 Year of construction: 2008 Running Hours: unknown Warranty: Partially functional; no warranty or guarantee Availability: approx. 4-8 weeks after receipt of down payment Details: + Cutting unit, hopper, frame, and control unit Nedoylhbfjpfx Adrewi + 3-shaft shredder + 2x 22 kW drive motors + Chip conveyor

Condition: good (used), Type FEr LD 180/600/1000 100% operational, automatic rotation Nwedeuhtmiepfx Adrei

Condition: new, Year of construction: 2026, CORMAK 500 x 1000 (CJ6250Cx1000) Universal Lathe The CORMAK 500 x 1000 is a robust and precise conventional metal lathe designed for professional machining in industrial plants, tool rooms, and repair workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable operation for both single-item and batch production. Key Advantages of the Machine Induction-hardened bed, resistant to torsion and vibrations – guarantees machining accuracy. Removable bridge section allows for machining parts up to 630 mm in diameter. Modern spindle bearing system with ball bearings ensures stable operation at high speeds. Precise speed and feed control – full control over process parameters. Rapid longitudinal and cross feeds – for faster operations. Digital readout for 3 axes – simplifies dimensional control and shortens setup time. Wide threading capabilities – metric, imperial, modular, and D.P. threads. Main motor 5.5 kW – high power for demanding material machining. Standard Equipment 3-axis digital readout 3-jaw self-centering chuck, Ø 250 mm Fixed steady rest Travelling steady rest Spindle reduction sleeve Foot-operated emergency brake Full-length chip guard Coolant system 24V halogen work light Threading dial indicator Nwjdpfxexd Upxe Adroi Tool kit CE Declaration of Conformity User manual Brand-new machine with warranty Technical Specifications Parameter Value Swing over bed 500 mm Swing over cross slide 325 mm Swing in gap 630 mm Turning length in gap 260 mm Maximum turning length 1000 mm Bed type Induction-hardened Bed width 330 mm Chuck diameter 250 mm Spindle bore 80 mm Spindle nose D1-8 CAMLOCK Spindle speed range 24–1600 rpm Max tool size 25 x 25 mm Longitudinal feed range 0.072–4.038 mm/rev Cross feed range 0.036–2.019 mm/rev Cross slide travel 305 mm Compound slide travel 130 mm Metric threads 1–192 mm Inch threads 0.5–28 TPI Module threads 1–56 mm D.P. threads 8–56 D.P. Tailstock quill diameter 65 mm Tailstock quill travel 120 mm Tailstock taper MT 5 Digital readout 3-axis Main motor power 5.5 kW Coolant pump power 0.1 kW Machine weight 1700 kg

Condition: new, Year of construction: 2026, CNC centers have been designed based on proven components that guarantee reliability for a long time of use. The massive machine body ensures efficient and precise machining. Hermetic chamber ensures safety and cleanliness at the workplace. The table with a hardened surface can accept workpieces without loading the mechanical elements of the structure. Each machine in this series is equipped with an efficient cooling system to ensure optimal cutting conditions. Description Linear guides Top quality guides for all axes Massive machine body Good accessibility of the work table Hermetic working chamber ensuring work safety CNC control (SIEMENS SINUMERIK 808D) Technical parameters Spindle taper BT40 Table dimensions 1000 x 500 mm The distance between the spindle and the table surface 620 mm The distance between the spindle and the column 530 mm Table travel 800 x 500 mm Z axis movement range 500 mm Spindle speed range up to 10 000 rpm Number / width / spacing of T-slots 4 / 18 mm / 120 mm Working feed 2000 mm/min Rapid feed X,Y,Z 15 m/min Number of tools in the magazine 24 Power (torque) of feed drives 1,75 / 1,75 / 3,5 kW Njdpfxerh Ewko Adrowi Spindle motor power 5,5 kW Power supply, total power 400V / 18 kW Max. table load 500 kg Weight 5000 kg Dimensions (L x W x H) 2800 x 2300 x 2700 mm

Condition: good (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Nodpfjzcrlcox Adrewi Electric adjustable mast height Mobile on castors Excellent condition Price € 8,900

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: 4TNV88-BIB, General information Field of application: Construction Weights Empty weight: 1.395 kg Functional Nedpoznr Erofx Adrewi Generator capacity: 20 kVA Dimensions of cargo space: 240 x 120 x 175 cm CE mark: yes Other information Generator: Meccalte Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 175 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = - Super Silent 55 dBA @ 7 metres - Stage V / StageV / Stage 5 / Stage5 / EU Stage V / EU StageV / EU V / EU Five / Stage Five / EU Stage 5 / Tier IV Final / Tier 4 Final / Tier4 Final

Condition: excellent (used), Year of construction: 2021, 2021 Negri Bossi M162 11000H-8400 Plastic Injection Molding Machine Nwsdpszk I Emsfx Adrsi Platen Dimension 2,160 x 1,730mm. Screw Ø100mm. S/No. 162-551

Condition: used, mileage: 401,000 km, power: 382 kW (519.37 HP), first registration: 05/2014, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2014, Equipment: ABS, electric window regulation, parking heater, power assisted steering, power mirror, retarder, trailer coupling, = Additional options and accessories = - Air horn - Air suspension - Disc brakes - Gullet - Immobilizer - Lift Axle - Radio - Radio CD player - Refridgerator - Sleeping cabin - Speed limiter - Sper - Steering Axle Nsdpfjzncnwjx Adrjwi - Toolbox = Remarks = Scania R520, 2014, Euro 6, 8x4, 401,000 km! Retarder = More information = Suspension: air suspension Front axle 1: Steering Front axle 2: Double wheels Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering GVW: 33.000 kg Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. Nsdpsh Rit Esfx Adrjwi It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .