Used Flame Simulator for sale (524)

Condition: excellent (used), Here we offer an LDS shaker with power amplifier and control unit. Shaker technical data: Shaker type V 875 Peak force SINUS 35.6 kN Peak force NOISE 35.6 kN (rms) Peak force SHOCK 106.7 kN Max. acceleration SINUS 1078 m/s² Max. acceleration RANDOM 735.5 m/s² (rms) Nwsdszd Umdepfx Acfjh Max. velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation types: horizontal, vertical, any angle Excitation types: Tests with sinusoidal excitation Tests with noise-shaped excitation Tests with sine and noise-shaped excitation Tests with shock-shaped excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile (Long Time History LTH). A real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types in signal analysis Possible data types for displaying the TRANSFER FUNCTION [transmibility(f)] Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Phase UnwrapPhase Real+Imaginery Mag+Phase dB Mag+Phase log Mag+Phase V875 Vibrator 440 mm SPA40K 35.6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Type: SPA56/40K v3 V875 TC Condition: used Scope of supply: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. Nwsdozd Uh Iepfx Acfeh 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Year of construction: 2011, condition: excellent (used), CTS Type: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control – 32-bit controller LCD control panel Digital display for set and actual values Numerical input of set values Error messages in plain text RS 232 interface Free switching channels for product-side test specimen activation Temperature Testing: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Nodpfxjzd Rzwj Acfswh Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Thermal radiation: approx. 1000 W at +20°C approx. 200 W at -25°C Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with a large flow rate of N2 until the o2 content drops below 3%. Then, it switches to a base flow amount (approx. 10% of the large flow rate). The nitrogen flow for the base amount is measured and displayed using a flowmeter and monitored via a limit switch. O2 monitoring continuously extracts gas from the test chamber via a flame arrestor and passes it over an O2 sensor which checks the residual oxygen content of the extracted air. Afterwards, the gas is returned to the test chamber via a second flame arrestor. The extraction pump is monitored by a volumetric flow meter. Additional details can be found in the Dräger user manual in the appendix. The gas system is currently deactivated! All technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without irradiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10 %, 3/N, 50 Hz Nominal power: 21.6 kW Rated current: 36.5 A Protection class: IP 54 Condensate drain: non-pressurized, R 1/2" inner thread Sound pressure level:

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Nsdeygn Ibopfx Acfewh Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, total length: 2,500 mm, total width: 1,000 mm, total height: 1,700 mm, drive type: Elektrisch, conveyor belt width: 800 mm, Equipment: rotational speed infinitely variable, Offered is a special-purpose machine designed to heat or flame-treat wood, horse hooves, or other materials using a wire conveyor belt and fire. Gas-powered burners or flame pots (2x6 units above, arranged in two staggered rows; and 2x6 units below, also in two staggered rows) are used, with each row individually controllable. This machine is ideally suited for companies specializing in Yaki Sugi (Shou Sugi Ban) treatment. Operation videos can be provided upon request. Conveyor speed is continuously adjustable. Nwjdpfsy N Ekmjx Acfjh Key data (see photo): - Power: 0.75 kW - Conveyor width: 800 mm - Dimensions: 2500 x 1000 x 1700 mm The machine can be inspected in Schöneiche near Berlin (15566). Price excluding 19% VAT.

Condition: excellent (used), CTS C-70/350 Climate Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: C-70/350 Equipment Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Testing Chamber Volume: approx. 350 liters For sale is a used CTS C-70/350 climate testing chamber from an industrial application. The system is suitable for temperature and climate testing, environmental simulation, material testing, electronics testing, quality assurance, as well as research and development. Technical Data: Temperature Range: -70 °C to +180 °C Climate Operating Range: +10 °C to +95 °C Humidity Range: 10 % to 98 % RH Dew Point Range I: +7 °C to +94 °C Dew Point Range II: -10 °C to +7 °C Temperature Stability (over time): ≤ ±0.3 K Humidity Stability I: ≤ ±1.5 % RH Humidity Stability II: ≤ ±3 % RH Cooling Rate: approx. 3.5 K/min Heating Rate: approx. 3.5 K/min Max. Heat Radiation at +20 °C: approx. 3000 W Testing Chamber Dimensions: approx. 650 x 720 x 750 mm (W x D x H) External Dimensions: approx. 920 x 1665 x 1800 mm (W x D x H) Weight: approx. 550 kg Power Connection: 400 V, 3/N, 50 Hz Connected Load: approx. 7.1 kW Rated Current according to Nameplate: approx. 11.5 A Protection Class: IP22 Sound Pressure Level: < 58 dB(A) Refrigerant: Pre-cooling Stage: R404A, approx. 2.3 kg Cooling Stage: R23 Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch Control Panel Viewing Window in the Door Interior made of Stainless Steel Testing Chamber Lighting Insert Grid made of Stainless Steel Feedthrough Ø 50 mm on the right, center Capacitive Humidity Measurement System Software Temperature Limiter Min. / Max. USB Port for Data Storage Ethernet Interface RS232 Interface Air-cooled Design Documentation / Operating Manual Service / Inspection Condition: Nwjdpfx Acezd D Nzefoh Used Optical Condition as shown in the pictures Normal signs of wear and tear from use and storage Scope of Delivery CTS C-70/350 Climate Testing Chamber Insert Grid Control Panel / Controller Documentation / Operating Manual Accessories as shown in the pictures Inspection possible after prior appointment. Shipping or freight shipping possible. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Nodpozd Dm Hsfx Acfowh Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Njdpfszd Dchex Acfjwh Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Equipment Programmable controller Viewing window Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Shelf insert Water canister Documentation / test report Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 99 h, input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 265 mm, operating speed: 145 mm/s, reverse speed: 210 mm/s, table width: 3,100 mm, table height: 890 mm, throat depth: 410 mm, clearance between the columns: 2,600 mm, total length: 4,320 mm, total width: 1,795 mm, total height: 2,630 mm, overall weight: 7,600 kg, Equipment: CE marking, documentation/manual, safety light barrier, Demo Delivery time - in stock price 41000 EUR Pressing force 100 tons Nwsdjf Eytlopfx Acfjh Bending length 3100 mm 4 axis (Y1,Y2, X, R) motorsed crowing Stroke 265 mm Distance between walls 2600 mm Throat depth 410 mm Hydraulic drive Lowering speed 210 mm/s Rotational speed 145 mm/s Rear bumper travel in the X axis 750 mm Rear bumper travel R axis 250 mm Table height 890 mm Engine power 7.5 kW Length 4320 mm Width 1795 mm Height 2630 mm Weight 7600 kg STANDARD EQUIPMENT: Hydraulic drive 4 axes (Y1, Y2, X , Z and R) CYBELEC 12 colorful graphic controls - 17" color touch screen - 3D imaging in simulation and production - Suitable for full Windows applications - USB interface and peripheral interface - Support for user-specific applications Rear bumper driven by a servo motor on linear guides and ball screws CNC controlled crowning Top tool EUROSTAMP 1260, H:67, 85° R:08 (set 835mm x length) EUROSTAMP 2067 lower tool, 4 slots V=16-22-35-50mm, 85° H:60 (set 835mm x length) Fiessler AKASam laser safety device mounted on the upper beam Arms supporting the sheet on the linear guide Front and rear laser security system Equipment compliant with CE regulations User manual in POLISH, GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - higher productivity compared to classic hydraulic presses -low energy consumption - compact drive spindle assembly with few individual components Available immediately from stock.

Condition: excellent (used), emtest / AMETEK Automotive EMC Testing and Simulation System Manufacturer: emtest / AMETEK System: Automotive On-Board Network and EMC Testing System For sale is a professional testing and simulation system for automotive, electronics, and EMC applications. The system is housed in a mobile 19" industrial cabinet and consists of several testing and simulation modules, including control software. System Components AutoWave Serial Number: P2133255901 VDS 200Q100.2-400 Voltage Drop Simulator Serial Number: P2135256067 PFM 200N100.1 Serial Number: P2124253356 Software autowave.control V7.4.5 Software license included The software is used to control the AutoWave system and the connected components. Communication is via Ethernet. A laptop or PC is not included in the scope of delivery. Interfaces Ethernet IEEE 488 USB Frame Bus In / Out Analog In DC Output Connectors CEE Power Connector Emergency Stop Switch Application Areas Automotive On-Board Network Simulation Voltage Drop Tests Nsdpfx Acey Rlbhjfswh EMV/EMC Testing Electronics and Component Testing Research and Development Quality Assurance Technical Notes Four-Quadrant Voltage Drop Simulator Suitable for Automotive Testing Profiles Supports common testing standards such as LV124, LV148, ISO 7637-2, and ISO 16750. Output range according to documentation: -20 V to +80 V Bandwidth up to 250 kHz Condition Used equipment from industrial use. Optical condition, see pictures. The device can be switched on, displays are active. Scope of Delivery emtest / AMETEK testing system in an industrial cabinet AutoWave module VDS 200Q100.2-400 module PFM 200N100.1 module autowave.control V7.4.5 software Software license Connection and fan units Accessories as shown in the pictures Inspection possible by appointment. Loading can be arranged. Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. We will be happy to answer further questions by telephone.

Condition: excellent (used), CTS Climate Testing Chamber C-70/1000-S Device Data: Manufacturer: CTS GmbH Type: C-70/1000-S Design: Climate testing chamber / Environmental simulation chamber Cooling: Water-cooled Description: Used CTS climate testing chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Used in industry, research, development, and quality assurance. Temperature and Climate Data: Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 2.5 K/min Temperature change rate (cooling): approx. 2.5 K/min Humidity range: 10 % to 98 % RH Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data: 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System: Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment: CTS control panel with LCD display Program operation Digital setpoint/actual value display Observation window in the door Stainless steel test chamber Test specimen protection / Temperature limiter Interior lighting Side cable entry points Entry points approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for test specimen control Mobile design on rollers Dimensions: Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Installation dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight: Test chamber: approx. 1000 kg Condenser: approx. 120 kg Documentation: Declaration of conformity Test certificates Operating manual Messages and digital channels Installation plan Quick start guide Humidity diagram Scope of supply: CTS Climate Testing Chamber C-70/1000-S Documentation, where available Scope of supply as shown in the images Functional test Refrigerant service Leak test Condition: Used. Condition, see images. Nwsdpjy Iam Hsfx Acfeh Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Binder MK 115 E3.1 Temperature Cycling Chamber Device Data Manufacturer: Binder Type: MK 115 E3.1 Article Number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. Used in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Temperature selector limiter Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface Feedthrough Ø 50 mm (left) Stainless steel interior with insert 4 rollers (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature changes (temperature cycling mode) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data Nwodpfx Asy H Hvlscfoh 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight approx. 260 kg Condition: Used. Optical and technical condition, see pictures. Scope of delivery: Binder MK 115 temperature cycling chamber Insert / interior fittings Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: excellent (used), Here, we offer you a Stratasys Objet 3D printer. The Objet Connex 500 is the groundbreaking multi-material 3D printer from Objet. With a large build volume of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material inkjet technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex 500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent, and standard to ABS engineering plastics. Excellent productivity The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue separate model elements together • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - allows printing of large parts in a single build or many small parts on a single tray Nwjdpfx Acszdnplsfoh • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of uninterrupted capacity • High speed - simultaneous printing of multiple items from different materials; models cure during printing; models can be processed immediately after printing • Easy-to-remove support material for complex geometries • Office comfort - quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. According to the last operator, it is in working condition. No functional test has been carried out by our company. Year of manufacture: 2010 Type: Objet Connex 500 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, - Dimensions: 770x630x430 mm - Removable cast iron cooking grates, dimensions (660x470 mm). Nodpfx Aey Tpchscfjwh - Heating provided by stainless steel burners with stabilized flame, located below stainless steel 'special' caps. - Lower stainless steel water tray (dual function): 1. Collects cooking juices and reduces smoke during cooking. 2. Releases steam for exceptional cooking results. - Stainless steel construction.

Condition: new, External dimensions: 2300 × 2450 × 2340 mm FGRi series Finish: Mosaic Dome Energy source: wood and gas Total gas power: 43 kW Natural gas consumption: 4.6 m³/h LPG consumption: 3.4 kg/h Gas connection: 3/4” G Capacity: 14 pizzas Ø 30 cm Productivity: 240 pizzas/h Motorized rotating hearth Variable speed and direction Nodpjzabf Tjfx Acfowh Two independent gas burners Separate vault and hearth heating Radiant atmospheric burners Burners designed by Morello Forni High refractory mass Insulation: bricked shell External finish: Mosaic Dome Dual manual/automatic mode Manual mode with flame modulator Analog thermostatic controls (optional) Unassembled shipping: not available Mouth width: 820 mm Net weight: 4000 kg General presentation The FGRi150 Coupole Mosaïque is a hybrid wood & gas rotary oven intended for pizzerias, Italian restaurants, franchises, and catering establishments that want to combine high cooking capacity with an elegant presentation. With its Mosaic Dome finish, it is suitable for locations where the oven is visible and contributes to the image of the concept, while maintaining the performance of the largest FGRi format. Why this model stands out This oven cooks 14 pizzas Ø 30 cm and achieves a stated production of 240 pizzas/h. It can operate on wood alone, gas alone, or in a combined wood + gas mode. Its gas-heated, motorized rotating hearth, with variable speed and direction, helps to distribute cooking over a large surface area. The two independent burners, dedicated to the vault and the rotating cooking surface, promote thermal stability when batches are cooked consecutively. Key advantages High capacity of 14 pizzas Ø 30 cm, suitable for high volumes. Stated production of 240 pizzas/h for peak service times. Hybrid operation: wood alone, gas alone, or wood + gas. Gas-heated rotating hearth for even cooking. Mosaic Dome finish with insulating shell and decorative cladding. External drawer for ash disposal and collection.

Condition: used, mileage: 345,086 km, power: 184 kW (250.17 HP), first registration: 04/2014, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2014, Equipment: AdBlue, air conditioning, cruise control, power mirror, soot filter, = Additional Options and Equipment = - Leaf suspension - EPS (Electronic Power Steering) - Tipping hydraulics - Particulate filter Nodpfozdb Ntsx Acfowh - Radio/CD player - Side door - Toolbox = Further Information = Front axle: Steering; Suspension: Leaf springs Rear axle: Suspension: Air suspension Unladen weight: 6,000 kg Payload: 5,990 kg gross vehicle weight (GVW): 11,990 kg Warranty: No liability for typographical or printing errors. Subject to change, prior sale, and errors! Please contact Emad Al Shogran for further information. Vehicle number: 125 MAN TGM 12.250 4x2 Skip Loader Heimann / Euro 5 .: WMAN14ZZ1EY311511 German vehicle Transmission: Automatic Suspension: Leaf/Air Air conditioning Engine brake Cruise control Emission standard EURO 5 Skip loader body Brand: Heimann Type: AKF - V Year of manufacture: 2014 with radio remote control Special equipment: Rear crossmember, Trailer coupling: Ringfeder 4040 G 145B, Trailer socket ABS, Exterior mirror wide angle and electrically adjustable & heated, left, Exterior mirror wide angle and electrically adjustable & heated, right, Brake connection 2-line at rear frame, Rear axle differential lock, Cab: with 3 rear window panels, tinted, Driver's seat comfort, air-suspended, Remote central locking, Flame start system, 12-speed gearbox - Type: ZF 12 AS, Tipmatic OD, Automatic climate control, 350 ccm air compressor, PTO NH/1C without flange, 12V / 180W socket in cab, Control module for external data exchange Other equipment: Axle configuration: 4x2, Starting aid/front mirror, Seat belt warning left, Audio system: Radio MAN basic Line (Radio/CD), Battery 88 Ah, On-board computer MAN-Tronic, Curb mirror right, Compressed air connection front, Electronic braking system MAN-Brakematic, EURO 5 engine, Cab: C (Compact), Suspension: Leaf/Air, Tinted windscreen, Alternator 28 V 80 A, Rear axle HY-0925, Body/chassis: chassis, Fuel filter heated, Fuel tank: 150 L, Fuel tank: combination tank - 150 L diesel + 10 L AdBlue solution, Adjustable steering column (steering wheel), High-mounted air intake, Dry air filter right below, Engine 6.9 L - 184 kW diesel, Engine brake, Spare wheel carrier behind rear axle, Rear axle disc brakes, Front axle disc brakes, Front mud flaps, Rear axle stabiliser, Plastic bumper, Tinted door windows, Rear underrun protection, Viscous fan, Front axle VOK-05 cranked, Permissible total weight 11.99 t = Company Information = No liability for typographical or printing errors. Subject to change, prior sale, and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust E-mail:

Condition: used, mileage: 112,439 km, power: 132 kW (179.47 HP), first registration: 02/2017, fuel type: diesel, overall weight: 7,490 kg, color: blue, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,837 mm, total width: 2,442 mm, total height: 2,743 mm, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, central locking, electronic stability program (ESP), Cab and Comfort* Cab 'C', 2240 mm wide, 1620 mm long * Driver's air-suspended comfort seat * Co-driver's bench seat for 2 people (individual seats) * Seat covers in standard quality * Washable interior door panels ----Electronics and Instruments* Instrument panel km/h 'High-Line' * MAN Tronic (on-board computer) * MAN Media Truck 12 V radio with 5" color display * Electric windows for driver and co-driver * Digital tachograph (CONTI) * Mechanical main battery switch, 2 x 12V 88Ah batteries ----Lights & Visibility* Headlight range adjustment * Halogen twin headlights H7 * Position and marker lights * Sun visor * Curb mirror on the right, EU front mirror on the co-driver's side * Rear-view mirror and wide-angle mirror, mechanical * Cab rear wall with tinted window ----Chassis and Drive* Engine: D0834LFL67, 180 hp / 132 kW, EURO6 SCR, 700 Nm * Engine brake, flame start system * Transmission: ZF 6S-800 OD * N-PTO NH/4C without flange f=0.67, right-hand side & MEILLER AXIAL pump * Leaf/leaf suspension * Differential lock, rear axle ----Safety and Driver Assistance* Electronic Braking System (MAN BrakeMatic) * Anti-lock Braking System (ABS) * Anti-Slip Regulation (ASR) Nwsdpjzdbk Rofx Acfoh * Electronic Stability Program (ESP) * Lane-Guard System IV (LGS IV) * Disc brakes front and rear ----Superstructure & Chassis * Tipping platform 3800x2350 mm, manufacturer MEILLER * Platform floor STE 500 - 3 mm * Side boards STE 380 - 2 mm, side board height 400 mm, front board 700 mm, rear board 400 mm * Recessed lashing points in the platform floor * Side walls foldable, rear wall pivoting and foldable * Access ladder under the tipping platform ----Trailer Coupling* RINGFEDER 4040 G145 B * Ball-head trailer coupling ROCKINGER 3004 (3500 kg) * Hydraulic connection at the rear for 3-way tipping trailers ----Tire Dimensions VA: 9.5R17.5 * Tire Dimensions HA: 9.5R17.5 * Fuel tank: 100 liters * AdBlue tank: 10 liters * Technically permissible total weight: 7490 kg * Tare weight: 4600 kg * Permissible trailer load: 11235 kg * Overall length: 5837 mm * Wheelbase: 3050 mm ----Vehicle Number: 12179----Errors and prior sale excepted----Advertising and various lettering have been digitally removed. We will gladly assist you with all the formalities that arise when purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of the rest. In addition, we can offer you the following services for an extra charge: ----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, brokerage of financing, application for export license plates, vehicle transport, registration of vehicles, recovery and vehicle transport. ----YOUR VTS TEAM

Year of construction: 2018, condition: excellent (used), functionality: fully functional, BINDER MKF240 Climate Test Chamber – 247 Liters | -40 °C to +180 °C | 10 % to 98 % RH For sale is a high-quality Binder MKF240 Climate Test Chamber in well-maintained condition. The unit is designed for demanding climate and temperature testing applications in research, development, quality assurance, and industrial environments. With an internal volume of approximately 247 liters, a temperature range of -40 °C to +180 °C, and a humidity range of 10 % to 98 % RH, the MKF240 is ideally suited for environmental simulation, temperature cycling, aging studies, material testing, and reliability testing. The stainless-steel interior and efficient air circulation system ensure uniform temperature and humidity distribution throughout the chamber. The integrated viewing window allows continuous observation of test specimens during operation. Technical Data Manufacturer: Binder GmbH Model: MKF240 Type: Climate Test Chamber Temperature Range: -40 °C to +180 °C Humidity Range: 10 % to 98 % RH Internal Volume: Approx. 247 Liters Stainless-Steel Interior Dynamic Air Circulation System Viewing Window Programmable Controller Made in Germany Applications Electronics Industry Automotive Industry Aerospace Industry Material Testing Research & Development Quality Assurance Reliability and Aging Tests Key Benefits Nwedpfjzdqytox Acfsh ✓ Combined temperature and humidity testing ✓ Precise environmental control ✓ Excellent temperature and humidity uniformity ✓ Robust industrial construction ✓ Ideal for laboratory and production environments Condition The unit is in good used condition. Inspection and functional testing are welcome by appointment. Additional photographs and technical information are available upon request.

Year of construction: 1999, condition: excellent (used), functionality: fully functional, machine/vehicle number: 59566005650010, VÖTSCH VC4060 CLIMATE TEST CHAMBER – INDUSTRIAL QUALITY FOR ENVIRONMENTAL SIMULATION For sale is a high-quality Vötsch VC4060 Climate Test Chamber in well-maintained condition. The unit has been designed for demanding climate and temperature testing applications in research, development, quality assurance, and industrial environments. Vötsch is one of the world's leading manufacturers of environmental simulation equipment and is renowned for precision, reliability, and long-term durability. The VC4060 is ideally suited for material testing, aging studies, reliability testing, and qualification of electronic and mechanical components under controlled environmental conditions. The stainless-steel interior, efficient air circulation system, and robust industrial construction ensure uniform temperature distribution and repeatable test results. The integrated viewing window allows continuous observation of test specimens during operation. Nedpfx Acszdqmgofjwh TECHNICAL DATA • Manufacturer: Vötsch Industrietechnik / Weiss Umwelttechnik GmbH • Model: VC4060 • Year of Manufacture: 1999 • Unit No.: 59566005650010 • Power Supply: 3/N/PE AC 400 V ±10 %, 50 Hz • Nominal Power: 7.8 kW • Nominal Current: 15 A • Refrigerant: R452A, 3.5 kg • Max. Low Pressure: 18 bar(g) • Max. High Pressure: 25 bar(g) • System Plan No.: 67611041LB • Stainless-Steel Interior • Viewing Window • Dynamic Air Circulation System • Made in Germany APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance CONDITION The unit is in good used condition. The interior is clean and the chamber presents itself in good overall condition. Inspection and functional testing are welcome by appointment.

Condition: excellent (used), functionality: fully functional, WEISS C-340/70 CLIMATE TEST CHAMBER – 340 LITERS | -70 °C TO +180 °C For sale is a high-quality Weiss Umwelttechnik C-340/70 Climate Test Chamber in very good condition. The chamber is designed for demanding environmental simulation, temperature cycling, quality assurance, research, and development applications. With an internal volume of approximately 340 liters and a temperature range from -70 °C to +180 °C, the unit is ideally suited for material testing, thermal cycling, aging studies, and qualification testing of electronic and mechanical components under extreme environmental conditions. The stainless-steel workspace features multiple shelf positions and a powerful air circulation system to ensure uniform temperature distribution throughout the chamber. The integrated touchscreen controller provides simple and intuitive operation. TECHNICAL DATA • Manufacturer: Weiss Umwelttechnik GmbH • Model: C-340/70 • Year of Manufacture: 2008 • Temperature Range: -70 °C to +180 °C • Internal Volume: Approx. 340 Liters • Nominal Power: 4.4 kW • Nominal Current: 13.0 A • Power Supply: 3/N/PE AC 400 V ±10 %, 50 Hz • Refrigerant R404A: 2.5 kg • Refrigerant R23: 0.65 kg • Max. Low Pressure: 19 bar(g) • Max. High Pressure: 25 bar(g) • Static Pressure: 9.5 bar(g) • Stainless-Steel Interior • Dynamic Air Circulation System • Large Viewing Window • Touchscreen Controller Nwodpfxozdqhde Acfeh APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance KEY BENEFITS ✓ Temperature testing down to -70 °C ✓ Precise temperature control ✓ Excellent temperature uniformity ✓ Proven industrial quality ✓ Robust and durable construction ✓ Suitable for continuous operation CONDITION The unit is in very good used condition. The interior is clean, shelving racks are installed, and the chamber presents itself in excellent overall condition. Inspection and functional testing are welcome by appointment.

Year of construction: 2010, operating hours: 18,766 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 58566150370010, VÖTSCH VC7018 CLIMATE TEST CHAMBER – INDUSTRIAL QUALITY FOR PRECISE TEMPERATURE AND HUMIDITY TESTING For sale is a high-quality Vötsch VC7018 Climate Test Chamber in very good condition. The unit is ideally suited for demanding temperature and humidity testing applications in research, development, quality assurance, and industrial environments. Vötsch is one of the world's leading manufacturers of environmental simulation and testing equipment, renowned for precision, reliability, and long service life. The VC7018 has been designed for reproducible climate and temperature testing and provides excellent temperature and humidity uniformity throughout the test chamber. The spacious stainless-steel workspace offers ample room for a wide range of test specimens and applications. Its powerful air circulation system ensures homogeneous climate conditions and reliable test results. The intuitive touchscreen controller allows simple and user-friendly operation. TECHNICAL FEATURES • Manufacturer: Vötsch Industrietechnik • Model: VC7018 • Type: Climate Test Chamber • Temperature Range: -70 °C to +180 °C • Humidity Range: 10 % to 98 % RH • Stainless-Steel Interior • Dynamic Air Circulation System • Large Viewing Window • Touchscreen Controller • Heavy-Duty Industrial Design • Suitable for Continuous Operation APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance • Aging and Reliability Testing KEY BENEFITS ✓ Precise temperature and humidity control ✓ Excellent climate uniformity throughout the chamber ✓ High-quality stainless-steel workspace ✓ User-friendly operation ✓ Robust and durable construction ✓ Ideal for laboratory and production environments ✓ Proven Vötsch technology and reliability CONDITION Nwedpfozdp Tlsx Acfjh The unit is in very good used condition. The interior is clean and the chamber is in overall excellent condition. Inspection and functional testing are welcome by appointment.

Condition: excellent (used), functionality: fully functional, VÖTSCH VC7034 CLIMATE TEST CHAMBER – 340 LITERS | -40 °C TO +180 °C AVAILABLE IN AIR-COOLED OR WATER-COOLED VERSION For sale is a Vötsch VC7034 Climate Test Chamber in very good condition. The chamber is designed for professional environmental simulation, temperature cycling, quality assurance, research and development, and reliability testing applications. With an internal volume of approximately 340 liters and a temperature range from -40 °C to +180 °C, the unit is suitable for testing electronic components, automotive parts, aerospace applications, materials, and industrial products under controlled environmental conditions. The chamber features a stainless-steel workspace, dynamic air circulation system, large observation window, and user-friendly touchscreen controller. These features ensure reliable and repeatable test results while providing excellent accessibility and ease of operation. TECHNICAL DATA • Manufacturer: Vötsch Industrietechnik • Model: VC7034 • Type: Climate Test Chamber • Temperature Range: -40 °C to +180 °C • Internal Volume: Approx. 340 Liters • Stainless-Steel Interior • Dynamic Air Circulation • Large Viewing Window • Touchscreen Controller APPLICATIONS • Electronics Industry • Automotive Industry • Aerospace Industry • Material Testing • Research & Development • Quality Assurance AVAILABLE VERSIONS AIR-COOLED VERSION The air-cooled version requires only a power connection and can be installed without additional infrastructure. Heat is dissipated directly into the surrounding air, making this version ideal for laboratories, workshops, and production facilities. Advantages: ✓ No cooling water connection required ✓ Easy and cost-effective installation ✓ Ready for immediate operation ✓ Flexible placement options WATER-COOLED VERSION The water-cooled version is connected to an external cooling water system. Heat is removed through a water-cooled condenser, reducing heat emission into the installation area. This configuration is particularly suitable for continuous operation and industrial environments. Advantages: ✓ Reduced heat load in the installation area ✓ Higher efficiency during continuous operation ✓ Ideal for 24/7 operation ✓ Suitable for industrial testing facilities CONDITION The unit is in very good used condition. The interior is clean, shelving racks are present, and the chamber is well maintained. Inspection and functional testing are welcome by appointment. Nwodpfozdpvasx Acfeh Loading assistance can be provided if required. Additional photographs, technical information, and pricing are available upon request.

Condition: used, Year of construction: 2007, The SHARP double-table machining center with 6 or more interpolated axes has an extremely rigid gantry frame and is particularly suitable for the production of elements for chairs, furniture, tables, beds, shells, stair components and musical instruments. • 4 motors of 9.6 kW each • Possibility of machining elements up to 145 cm wide and 200 cm long • Technically efficient machine with PITAGORA simulator and anti-collision program, AlpaCAM software and OSAI control • Year 2007, machine no. 445 • Dimensions that are needed in the hall to set it (building dimensions) - width 3.7 m (from the operator's side) x length (depth) x 4.9 m • Equipped with: a) 4 higher tables for attaching elements / beams Njdpfxoxxh Haj Acfjwh b) 4 lower tables for attaching elements / beams c) vacuum pump d) bars with a length of 113 cm for vacuum / for mounting pressure / positioning cylinders - 4 items

Condition: ready for operation (used), Year of construction: 2022, Panel saw manufactured in 2022. This FELDER K 945S features a maximum cutting height of 155 mm and a maximum cutting width of 1250 mm. It includes a sliding table with a cutting length of 2800 mm and a powerful 5.5 kW main saw motor. If you are looking to get high-quality cutting capabilities, consider the FELDER K 945S panel saw we have for sale. Contact us for further details. • FELDER K 945 S sliding table saw • Manual blade angle adjustment with angle display and handwheel • Tilting saw unit 90°–45° • Blade diameter range: 250–450 mm • Maximum cutting height: 155 mm • Electric height adjustment • Maximum cutting width: 1250 mm • Main saw motor 5.5 kW (7.5 HP), 3x400 V, soft start, CE brake • Three spindle speeds: 3500 / 4500 / 5500 rpm • PCS (Preventive Contact System) safety system with optical status indicator; resettable after activation • Antistatic belt for PCS system • Sliding table, cutting length 2800 mm, anodized aluminum • 10-year warranty on the X-Roll sliding table system • Parallel fence with round guide bar, D = 50 mm • Rip fence 2600 mm with clamping system for extension table 1300/1500 • Extension table for cutting lengths 2500–3200 mm • Support surface: 1150 x 640 mm • Crosscut fence 3200 mm with 2 flip stops • Overhead guard for 1250 mm cutting width with 100 mm dust extraction connection • Machine stand for K 945 S, cast iron saw table; operating tools included Nwodpezdka Tefx Acfjh • User manual in Czech • Additional warranty: 3 years on machine parts (valid when commissioned by an authorized FELDER technician) • Transport packaging for sliding table • Standard pallet: 2100 x 1500 x 1500 mm Additional equipment • Dust extraction system: • Mobile dust extractor AF 22 • 4.0 HP (3.0 kW), 3x400 V, 50/60 Hz • Standard dust filter • Connection ports: 120 mm and 80 mm • Dust extraction hoses: • 4 x industrial extraction hose H/SE Ø120 mm • 4 x industrial extraction hose H/SE Ø100 mm • Heavy-duty, abrasion-resistant, flame-retardant; smooth internal surface • Spare parts included: • Adjustable support rail (106ND) • Cross roller rail plate (Fen-Grau) • Clamp rail lower section • Compression spring • Clamp rail upper section • Additional machine spare part (222MB)

Condition: ready for operation (used), Year of construction: 2017, number of axes: 5, This 5-axis BIESSE Rover A Edge 1643 was manufactured in 2017. It features a versatile CNC machining center with an edge banding unit, ideal for various applications. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover A Edge 1643 machine we have for sale. Contact us for further details. Nwedpfx Acozdi Hxsfjh BIESSE ROVER A 1643 EDGE - Technical Specification Machine type CNC machining center with edge banding functionModel: ROVER A 1643 EDGEDesigned for machining and edge banding of shaped/profiled panels Configuration shown in the documents indicates a 5-axis setup Working area X-axis working area: 4,320 mm Pendulum working in X: 1,620 mm Y-axis working area: approx. 1,580-1,660 mm Z-axis travel: 180 mm Edge banding X-axis working area: 3,300 mm Edge banding Y-axis working area: 1,540 mm Maximum loading width in Y: 1,900 mm, extendable up to 2,100 mm 5-axis unit 5-axis machining headC-axis: continuous 360° rotationB-axis: continuous 360° rotationB-axis speed: 18 rpmC-axis speed: 18 rpmMaximum spindle speed: 24,000 rpmPower:11 kW in S1 cycle13 kW in S6 cycleMaximum undercut angle: -10°Collision control for the 5-axis unitPrepared for aggregate use on the 5-axis unit Work table and clamping ATS work table8 support beams32 movable carriages32 pneumatic vacuum podsVacuum pods adjustable in 15° stepsPneumatic system divided into 2 working zones in X Vacuum pump capacity: 250 m³/h6 lifting beams for easier loading and unloading28 sensors for detecting lowered stopsStops and positioning8 rear stops8 central stops4 side stops, 2 left + 2 right2 additional side stops4 removable central stops, 2 left + 2 right2 additional central stopsPneumatic positioning and lowering of stops Drilling unit BH 24L drilling head13 vertical independent spindles5 horizontal independent spindlesGrooving saw Ø120 mmMaximum grooving depth: 25 mmSpindle speed programmable up to 6,000 rpm Tool changer 16-position rotary tool magazine Mounted on the X-axis carriage For tools and aggregates Maximum tool/aggregate weight: 7.5 kg Total maximum magazine load: 55 kg Edge banding unit GU60A edge banding unit For panels up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue tank with hot-melt glue systemEdge heating lamp, 600 W NC-controlled edge feeding system Automatic edge cutting Sensor for closed geometric shapes Edge banding accessories 2-roll edge magazine mounted on the X carriage Maximum roll diameter: 800 mm Maximum edge height: 65 mm Corner rounding tool Ø85 mm, HSK F63 Saw aggregate HSK F63 for cuts and grooves, max blade Ø215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with Ø215 mm blade: 68 mm Edge trimming units Combined glue scraping / edge scraping units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment DXF, CIX and BPP import 3D machine simulation Tool management 5-axis machining management by positioning Wizard-based program creation Safety CE compliant Safety mats Safety barriers Safety sensors Modified safety system allowing loading in Y up to 2,100 mm Summary This is a well-equipped BIESSE ROVER A 1643 EDGE CNC machining center with 5-axis machining head and edge banding package. The documents show B and C continuous rotation, 5-axis programming, 5-axis collision control, and a dedicated aggregate flange for the 5-axis unit, so based on these documents it should be treated as a 5-axis machine.