Used Flottweg Decanter Centrifuge for sale (984)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water Bdedpfxefyn Rpe Ahmjh - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Bodpfx Aozzvgajhmedh Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Complete Olive Oil Processing Plant PIERALISI – Available for Sale Working in 3-Phase Year : 2016 The plant consists of the following equipment: Stainless steel hopper – 20 quintals capacity Stainless steel conveyor belt Double washing system with rinsing – Clemente 50 HP crusher (Spain) 3 malaxers – 40 quintals capacity each 2 mono pumps – P80 Leopard 8 decanter with tank Valente centrifuge Paté reprocessing system (Ripasso) Bjdpfxezbz Rle Ahmodh MI150 piston pump Gramola V3 Major 3 industrial unit Electrical panels and various accessories Operated for 3 harvest seasons only Centrifuge fully overhauled and not used after revision The plant is suitable for medium to large-scale olive oil production and is available for inspection upon request. For further technical details or commercial discussions, please feel free to contact us directly.

Condition: reconditioned (used), functionality: fully functional, rotational speed (max.): 4,600 rpm, type of input current: three-phase, Reconditioned nozzle separator, complete with tools Bdjdouccy Uopfx Ahmeh

Condition: excellent (used), Year of construction: 2022, operating hours: 339 h, functionality: fully functional, machine/vehicle number: 22016009-T, tank capacity: 60 l, input voltage: 400 V, input frequency: 50 Hz, empty load weight: 470 kg, year of last overhaul: 2022, water tank capacity: 280 l, Equipment: rotational speed infinitely variable, ERBA Turbo 60 W Centrifugal Grinding System – only 339 operating hours, including cascade system and sieve vibrator For sale is our ERBA Turbo 60 W centrifugal grinding system for wet processing. The system was purchased in 2022 but has only been used sparingly since then. With only 339 operating hours, it is in very good used condition. The reason for the sale is that we need the space for newly acquired equipment. Technical data and features: - Container volume: 60 liters - Turntable speed: continuously adjustable from 0 to 300 rpm - Motor power: 3.0 kW - Operating voltage: 400 V / 50 Hz - Work container and turntable with highly wear-resistant PU lining - Electric tilting device for the processing unit - Dosing pump for liquid process additives - Timer for setting the processing time - Frequency inverter for stepless speed control Accessories included in the offer: - ERBA cascade system: 280-liter tank with three chambers and a circulation pump for the circulation and reuse of the process water. - ERBA sieve vibrator YE 50: Bodpfx Ajz D Sr Iohmodh Separate sieve unit with a sieve area of 1,385 × 530 mm and a main sieve made of PE. With a discharge for grinding media in the direction of flow, a lateral discharge for small particles, and a frequency inverter for stepless adjustment of the motor speed. A little-used system with extensive equipment for wet lapping. If you are interested, we look forward to hearing from you.

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas Bedpfxsz D Uvpo Ahmedh The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo

Condition: used, mileage: 62,506 km, power: 117 kW (159.08 HP), first registration: 09/1971, fuel type: diesel, empty load weight: 8,020 kg, maximum load weight: 3,580 kg, overall weight: 11,600 kg, tire size: 8,25-20 PR 12, axle configuration: 4x2, wheelbase: 4,200 mm, color: red, driver cabin: other, gearing type: mechanical, suspension: steel, number of seats: 6, total length: 7,000 mm, total width: 2,450 mm, total height: 2,650 mm, Vehicle location: Bovenden, switch 5, rotating beacon, leaf suspension Wheelbase: 4200 mm Superstructure: Gebr. Bachert TRO-TLF16 approx. 2000 ltr. 6-cylinder fire-fighting vehicle, a Bachert FP16/8 centrifugal fire-fighting pump with a water delivery rate of 1600 l/min at 80 mWS total delivery head is installed in the rear of the vehicle. With H-approval. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bdjdevhhgpopfx Ahmjh - .

Condition: good (used), functionality: fully functional, The innovative QIAcube controls integrated components including a centrifuge, heated shaker, pipetting system and robotic gripper. This enables the QIAcube to fully automate more than 40 QIAGEN spin column kits. Bdedevzr Nbepfx Ahmeh The QIAcube comes preinstalled with a variety of protocols for purification of RNA, genomic DNA, plasmid DNA, viral nucleic acids and proteins, plus DNA and RNA cleanup. All standard protocols in the expanding range can also be downloaded for free. In addition, custom protocols tailored to your specific application requirements can also be requested. The QIAcube is well suited for academic research laboratories and pharmaceutical, biotechnology and biomedical research laboratories performing applications such as: Sequencing / sequencing analysis Gene expression analysis genotyping proteomics Centrifuge: 12,000 x g maximum, swing-out rotor with 12 positions, maximum 45° Humidity: Relative humidity of 10-75% (non-condensing) Instrument dimensions: 650 x 620 x 570 mm Operating temperature: 18 – 28 ° C Pipetting system: Syringe size 1 ml, pipetting range 5-900 μl Samples per run: 1-12 samples per run Shaker: Speed 100-2000 rpm, amplitude 2 mm, heating range room temperature to 70°C, ramp time of

Condition: used, mileage: 658,334 km, power: 338 kW (459.55 HP), first registration: 08/2018, fuel type: diesel, empty load weight: 11,760 kg, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, differential lock, onboard computer, trailer coupling, Manufacturer: MAN - Type/Model: TGS 26.460 6x2 - First registration: 08/17/2018 - Mileage: 658,334 km (engine replaced at 309,000 km) - Number of axles: 3 - Emission class: Euro 6 - Transmission: Automatic - Suspension: Air suspension with lift function - Steerable axle - Brakes: Disc brakes - Air conditioning - Unladen weight: 11,760 kg - Body manufacturer: HLW - Tank material: Stainless steel - Total tank volume: 17,000 L - Tank compartments: 3 - System designation: HLW Turbo - Centrifugal pump - MAK 3002 Plus - Data transmission - CIP cleaning Bdsdpoz Eucrefx Ahmsh

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. Bsdpfoz E Ixtex Ahmodh With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, fuel type: diesel, axle configuration: 4x4, fuel: diesel, gearing type: automatic, Year of construction: 2004, From our immediately available stock of used vehicles, we offer you: Firefighting vehicle HLF 20 ALL-WHEEL DRIVE 4x4 on MB ATEGO 1328 AF General data: • First registration 03/2004 • Mileage: approx. 144,500 km • Unladen weight: 9,450 kg • Permissible total weight: 14,500 kg • New TÜV/MOT inspection Chassis: • MB 1328 AF 4x4 with 279 hp (205 kW) • Allison automatic transmission • Twin-tire rear axle Bdsdpfszv Eqkox Ahmsh Cabin: • Standard crew cabin (1:8) in RAL 3000 (fire engine red) • Mounting points for 2 compressed air breathing apparatus facing forward Superstructure: • Manufacturer: Schlingmann • HLF20 superstructure according to DIN standard • Three generously sized side equipment compartments on each side • Fold-out steps for the front and rear side equipment compartments • Mounting points for standard equipment • Mounting points for 2 additional compressed air breathing apparatus • Deployment system for 2 single-person reels Vehicle pump/fire extinguishing agent tank: • Firefighting centrifugal pump Schlingmann FPN 2000-10 • Output: 2,000 l/min at 10 bar • Water tank: 1,800 l • Foam tank: 150 l Firefighting equipment: • Fixed quick-attack hose, 50 m long, located on top • Monitor on the vehicle roof Safety and lighting • Ambient lighting on the superstructure • Pneumatic lighting mast • Rear warning device We will gladly provide you with a detailed offer and show you the vehicle in Berlin. All information is provided to the best of our knowledge and belief, without guarantee for completeness and accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, 2015, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Bdjdpfx Aszz Sidjhmeh Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Bdodjz Hq Akopfx Ahmoh Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: used, Year of construction: 2006, Overview This KHS Innopro warmer-cooler is a skid-mounted thermoregulator for wine, built in 2006 by KHS AG in Dortmund, Germany. It brings wine to a set temperature, heating or cooling as required, at up to 9,900 l/h (99 hl/h), designed for an outlet temperature of 18 °C. The core is a three-section Thermowave plate heat exchanger; stainless steel piping, pumps, pneumatically operated valves and instrumentation are mounted on one frame and run from a freestanding KHS stainless steel control cabinet with touch panel. The unit was last used in a wine bottling line. Technical data Bsdez Hckmspfx Ahmedh - Manufacturer: KHS AG (Dortmund, Germany) - Model: Innopro warmer-cooler - Year of manufacture: 2006 (control cabinet 2007) - Machine type: thermoregulator for heating or cooling wine, skid-mounted - Product: wine - Throughput: 9,900 l/h (99 hl/h) - Cooling section: wine from 26 °C to 18 °C, cold water 10 °C to 14 °C at 18,328 l/h - Heating section: wine from 9 °C to 18 °C via a warm-water circuit (25 °C to 21 °C, 20,516 l/h), which is heated by hot water from 100 °C to 55 °C - Plate heat exchanger: Thermowave, 3 sections, 71 plates, total heat transfer area 6.1 m² - Plate heat exchanger ratings: operating pressure 10 bar, test pressure 12.5 bar, max. operating temperature 100 °C - Power supply: 400 V, 50 Hz, 3/N/PE, rated current 25 A; control voltage 24 V DC - Overall dimensions: approx. 3,100 x 1,850 x H 2,330 mm Equipment - Thermowave plate heat exchanger with cooling, wine heating and warm-water heating sections - Warm-water circuit and membrane expansion vessel - Centrifugal pumps, including a Hilge stainless steel pump - Pneumatically operated valves and a pneumatic control valve with positioner - Pressure gauges and process instrumentation - Freestanding KHS stainless steel control cabinet with touch panel - Stainless steel skid frame with interconnecting piping Condition Used. Still installed and can be inspected by appointment. Availability Immediately. Location: Belgium.

Condition: used, Year of construction: 2016, Overview This ABE Portable CIP unit is a two-tank clean-in-place system built in 2016 by American Beer Equipment (USA) for craft breweries. A wash tank and a sanitize tank of 150 l each, both electrically heated and temperature-controlled, a stainless steel centrifugal pump and a manual valve manifold are mounted together on one stainless steel frame. The unit is still installed in a craft brewery in Spain, which is ceasing operations. Technical data - Manufacturer: ABE - American Beer Equipment (USA) - Model: Portable 2x150 L - Year of manufacture: 2016 - Machine type: portable 2-tank CIP unit (wash and sanitize) - Tank volume: 2 x 150 l - Operating mode: manual - Electrical supply: 3-phase - CIP pump: Bominox stainless steel centrifugal pump, 2,900 rpm - Water inlet and drain connections: 1-1/2" Tri-Clamp - Tank overflow: 1" tube Equipment - Wash tank and sanitize tank, 150 l each, stainless steel, each with electric heating element and low-level sensor - Control panel with two digital temperature controllers, pump and heater switches and emergency stop - Bominox stainless steel centrifugal pump with valve manifold: recycle, tank outlet and system outlet valves - Stainless steel frame carrying tanks, pump and piping - Operator's and technical manual (English) with electrical diagrams and parts lists Condition Used, installed and in operation until the brewery closes. Inspection on site possible on request. Availability Bdsdpfxez Hzgye Ahmsh Immediately. Location: Spain.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3141, Technical characteristics: Core Specifications Attribute Value Ultrasonic Technology High-frequency cavitation system Tank Capacity Approx. 230 liters Cleaning Stages Multi-stage (pre-wash, ultrasonic, rinse, dry) Heating System Integrated, adjustable up to 60–80°C Ultrasonic Frequency 25 kHz Construction Material Stainless steel AISI 304 or higher Control System Programmable with safety interlocks Automation Options Basket lift, agitation, filtration, oil separation Power Supply 400V / 50Hz Noise Level Approx. 70–75 dB(A) Features & Capabilities Bodpexx Swvefx Ahmjdh - Multi-phase cleaning: Includes vapor pre-treatment, ultrasonic washing, cold/hot rinsing, and hot-air drying. - Oil separation system: Utilizes skimming and decanting to maintain cleaner baths. - Modular design: Configurable with additional stations for drying, corrosion protection, or deionized rinsing. - Safety & Ergonomics: Enclosed chambers with polycarbonate windows and sensor-based safety systems. - Continuous-duty rated: Designed for high-throughput industrial applications. Machine status: WORKING

Condition: excellent (used), Year of construction: 2001, Complete skid mounted unit with: 1) Infeed trolley/Wagon with 2 stainless steel augers pushing the product into a Positive Rotary piston Pump for ingredients like: Grinded cheese, butter, vegetable fatt, salts etc a cold premixed blend. 2) Steam injection system to heat to 80°C with pump on outlet. 3) 2de heating: 95/140°C This high Ultra high heating module can by by-passed by switching 2 swingbend panels 4) Holding tube 5) Flow diversion valve (no product can pass if temperature not achieved) 6) Flashcreaming module, Vessel of 44ltr combined cooler for rapid cooling and creaming in one. 7) Viscosity measuring system with pump and sensor to check the viscosity. 8) Centrifugal CIP pump 9) Scid mounted with all needed inter connecting piping, sensors and valves. 10) Controls Siemens S5 and operator panel. The UHT System is a compact, skid mounted modular line-process system designed especially for lab or small scale industrial production Bedpfjzdrufsx Ahmsdh

Condition: new, functionality: fully functional, power: 9.6 kW (13.05 HP), fuel type: diesel, color: yellow, operation weight: 504 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 6555 Heh Vibratory Plate – NEW Wacker Neuson DPU 6555 Heh Vibratory Plate – NEW | 65 kN centrifugal force | 710 mm working width | Hatz 1D81S diesel engine with 9.6 kW | Electric start & operating hours counter Item number: 5100009636 Technical Data: Manufacturer: Wacker Neuson Model: DPU 6555 Heh Condition: NEW Operating weight: 504 kg Frequency: 69 Hz Bdedpsz Hvvcsfx Ahmeh Centrifugal force: 65 kN Working width: 710 mm Engine: Hatz 1D81S diesel engine Engine power: 9.6 kW Fuel: Diesel Starting system: Electric start Compaction class: Heavy-duty compacting Performance: approx. 1,140 m²/h Highlights & Features: - Powerful vibratory plate for demanding compaction jobs - Robust construction – ideal for intensive use on construction sites - 710 mm working width – high area performance with a compact design - Convenient electric start & integrated hour meter - Reliable Hatz diesel engine – powerful & durable - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Civil engineering & road construction ✓ Pipeline & sewer construction ✓ Construction companies & municipal use ✓ Compaction tasks on large construction sites Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany and internationally upon request Price quoted ex works Maassenstraße 91, D-46514 Schermbeck (district of Wesel) All information without guarantee. Subject to errors and prior sale. Prices plus VAT / VAT excluded Other models and sizes available! Also offering DPU 6260, DPU 5275, etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson vibratory plate | DPU 6555 Heh NEW | Diesel vibratory plate 65 kN | Vibratory plate with electric start | Hatz diesel engine | 710 mm working width | Wacker Neuson compaction technology | Vibratory plate for civil engineering & road construction Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! Virtual inspection of the machine via video call available on request.

Year of construction: 1993, condition: used, functionality: fully functional, APV Rosista DELTA D2 Valve Manifold – 199 Double-Seat Valves Manufacturer: APV Rosista Model: DELTA D2 Valve Manifold Year of Manufacture: approx. 1993 Condition: used Application: Dairy Industry / Food Processing Total number of valves: 266 pcs. Double-seat valves: 199 pcs. Nominal sizes: DN65 / DN100 Composition of the valve manifold: - 84 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN100 - 115 pcs. APV Rosista DELTA D2 Double-Seat Valves – DN65 - 67 pcs. pneumatically actuated APV shut-off valves - 4 pcs. Endress+Hauser Promag P magnetic-inductive flow meters - 4 pcs. Fischer & Porter flow meters - 7 pcs. APV centrifugal pumps - extensive stainless steel piping - pneumatic actuation of the valves - valve controls / pneumatic connections - complete stainless steel substructure Bdsdpfxsz Ib T Aj Ahmsh In total, the valve manifold has 266 pneumatically actuated APV valves, including 199 APV DELTA D2 double-seat valves.

Condition: used, This listing is for 1 of 2 MSE Micro Centaur Centrifuge. The unit is in full working condition and is ready for immediate release. The Micro Centaur is a bench top machine designed specifically for centrifuging small capacity tubes. Its small size and light weight make it ideal for transporting by hand, and using in laboratories where space is at a premium. The Micro Centaur is ideal for hospital and research laboratories, and for applications such as amino acid analyses, enzymatic, biochemical and immune assays, and for the separation of physiological fluids. Bjdpfx Ahexx Arqemsdh Technical specifications: Voltage: 220-240 V Power: 250 W Centrifuge speed: 6,500 rpm or 13,000 rpm Timer: up to 8 minutes Rotor: fixed angle with 12 x 1.5 / 2.0 ml Outer dimensions (W) x (D) x (H): 200 x200 x 190 mm

Year of construction: 2023, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: N.A., Unused CIC 600 Inverting Filter Centrifuge made of Hastelloy C22 DIN 2.4602. The centrifuge was delivered and installed in 2023, however, this unit along with much of the associated equipment was never put into operation. The centrifuge has a drum diameter of 600 mm, a nominal capacity of 52 liters or 65 kg, maximum drum speed 1940 rpm, maximum centrifugal acceleration 1260 (g), housing material 1.4571, product-wetted parts made of 2.4602—identical to Heinkel centrifuges. Scope of supply: a) CIC 600 Inverting Filter Centrifuge b) Support frame c) CIP system integrated into the main system d) Quick-release front housing, tool kit included Bdedpfjyffr Ujx Ahmoh e) Inertization pressure monitoring integrated into the main system f) Solids discharge valve g) Flooding function h) Wash tray including coating Detailed technical information is available upon request. Please contact us for a written offer. Dismantling, packaging, and loading onto a truck will be organized and supervised by Cycron GmbH, ensuring a highly professional process. For further questions or to get in touch, feel free to contact us anytime. We look forward to hearing from you. Cycron GmbH, Switzerland

Condition: used, This listig is for a Hettich Rotina 420 Centrifuge Bdodexzg D Nspfx Ahmeh The Hettich ROTINA 420/ ROTINA 420R is a high performance benchtop centrifuge for large volumes, yet not overly large in size. The new, compact, 2-liter bench top centrifuges are for high sample throughput as well as for high sample volumes.

Condition: used, This listing is for a Abbott 75003530 Centrifuge Bedpfx Aoxzhh Ajhmodh

Condition: used, This listing is for the Hereaus Sepatech Biofuge 15R Refrigerated Centrifuge Bsdpfxsxzidle Ahmsdh The Heraeus Sepatech Biofuge 15R is a benchtop high-speed refrigerated laboratory centrifuge designed for centrifugation tasks in research, clinical diagnostics, molecular biology, and biotechnology settings. It combines rapid spinning performance with active cooling to preserve temperature-sensitive samples during separation processes

Condition: used, Year of construction: 1993, Manufacturer: Guinard Centrifugation (Andritz) Model: D5LP50HBIL Bdedpfox R A A Aox Ahmjh Year : 1993 Type: Decanter / centrifugal separator   Previous use: sludge Nominal speed: 2700 rpm - Maximum: 3200 rpm Nominal diameter : 520 :mm Power: 45 KW   Output extraction / pumping system Inspection report 12,000 H : available (29/01/2021)