Used Frame Press S+S for sale (78,475)

Condition: used, Year of construction: 2000, For fully automated assembly of frame components. Frame outer dimensions: min. 120 x 120 mm Gksdpfx Aijd H Irfsxsa max. 1050 x 2,500 mm 2 heating rails

Condition: good (used), For fully automatic assembly of frame components. Frame outer dimensions: min. 120 x 120 mm Gjdpfx Aodhdg Ijixjka max. 700 x 2,500 mm

Condition: used, Year of construction: 1986, - 2 pneumatic cylinders along the length - 2 pneumatic cylinders along the width - 2 pneumatic workpiece clamping devices - Feed belt width: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Machine dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm Gedpfx Aoiim Rnjixoka - Height: approx. 1,400 mm - Weight: approx. 800 kg

Condition: new, Technical Data • Application: for frame assembly • Minimum frame outer dimension (mm): 120 x 120 • Maximum frame outer dimension (mm): 700 x 2200 • Machine length (mm): 2750 • Machine width (mm): 1250 • Machine height (mm): 900 • Machine available in special sizes Machine Features • Precise alignment of frame strips eliminates any displacement of the mitered surfaces relative to each other. Gkodpfx Aisfiqlloxsa • Manual alignment of frame strips is no longer required. • Frames can be produced economically through automation. • Frame dimensions are not limited by the machine design. • Various popular methods for joining frame miters are possible. • The compact design results in a small footprint for the machine. • Simultaneous gluing of the center layer is possible. • Complete fronts can be glued in a single process.

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Gsdpfxjk S Htxe Aixska Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Gjdpjdzqmzjfx Aixeka Stroke rate up to 250 strokes/min Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Gkodpfx Ajh U Dtuoixja Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz Gkodpfeh Uhqysx Aixoa - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Single-column hydraulic press, straightening press, punching tool – ECKOLD Press frame with hydraulic cylinder, mobile press, punching unit Type RSD 1500 - 125 Machine No. 317 / 690 Year of manufacture approx. 1986 Pressing force 150 tons Stroke 125 mm Godpfx Aed Swtasixjka Ram stroke 35 mm Table size 280 x 210 mm Ram surface Ø 125 mm Installation height (ram to table) max. 265 mm Table height above floor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit - Ram surface with 4 threaded holes M16 and 20 mm guide groove, with a centering bore Ø 15 mm in the center - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg Good condition

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation Gkodjdzqddjpfx Aixea - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Gedpfxed Rzc Re Aixoka

Condition: used, Year of construction: 1988, usedmake Hesstype Hydro-Spezialyear of construction 1988cylinder horizontal 2working width 3550 mmworking height 2350 mmpressing depth 100 mmweight approx. 2000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Gjdpfxsvwfw Ds Aixeka

Condition: used, Year of construction: 1977, used, good conditionMake MawegType HSYear of construction 1977MachineNo. 721104881cylinder horizontal 3 xwith weight compensation 3 xcylinder vertical 2 xwith weight compensation 1 xcylinder stroke 250 mmworking width 3550 mmworking height 2600 mmpressing depth 80 mmhydraulicspace requirement approx. 4000 mm x 800 mm x 3000 mmtotal connected load 1.1 kWstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Gedpfx Aievwffhoxska

Condition: used, Year of construction: 1990, used manufactured by Steton type SOPE built in 1990 cylinder horizontal 3 cylinder vertical 3 working width 3050 mm working height 2050 mm hydraulic required space ca. l x w x h mm 4100 x 1300 x 2600 weight ca. 1500 kg Gkedpfx Asvwfa Eoixoa total connected power 2.2 kW located in 97447 Gerolzhofen sale in current condition

Condition: used, used Brand: Maweg Type: RPV Machine no.: 74019 Cylinders horizontal: 2 Cylinders vertical: 3 with weight compensation Cylinder stroke 100 mm Working width 3700 mm Working height 2480 mm Press depth 100 mm Gedpfx Ajwqg R Reixeka hydraulic Additions for small window sizes Space required approx. 4200 mm x 1350 mm x 2900 mm Weight approx. 1200 kg Total connected load 2.2 kW Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected without guarantee and warranty

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) Gkedpsyuxkofx Aixja working space as frame press (w / h in mm): 2700 x 1800 working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto

Condition: new, Working width 3500 mm Gsdod Ih H Sspfx Aixoka Working height 2300 mm Number of cylinders 4 St.

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file Gjdpfx Aed Ih H Njixoka

Condition: excellent (used), Year of construction: 1992, 4.5 kW motor Working height 245 cm Godetq S H Aepfx Aixska Working width max. 365 cm

Condition: used, Veneer press OTT Type JU 60S Gsdpfx Asvdaymjixska Pressing area max. 225x120 cm Electric

Condition: used, Technical specifications: Godpfx Aisyv Atroxoka Max. dimension of glued component: 1600 x 3000 mm 3 vertical presses 2 horizontal presses Hydraulic presses Power supply: 400 V Motor power: 1.5 kW Motor speed: 1450 rpm Overall dimensions: Length: 1200 mm Width: 3500 mm Height: 2500 mm

Condition: used, Technical data: Total gluing length: 14 meters Two independent sections with separate controls: 6 m/unit and 8 m/unit Hydraulically operated clamps Gkedox Id Diepfx Aixja 12 vertical clamps 28 horizontal/rear clamps Power supply: 400 V Total motor power: 15 kW Possibility to purchase the 6 m and 8 m sections separately. Overall dimensions: Length: 18,000 mm Width: 1,200 mm Height: 2,500 mm

Condition: new, 4 glueing poles, 1 pressing bar, hydraulic, Godpfx Aevrv H Sjixjka external sizes L x H 3000 x 2000 mm, ca. 200 kg

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Gksdpfx Ajktm N Dsixea

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Gjdpfx Aiotqwtdjxoka Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)