Used Fully Automatic Band Saw Machine for sale (84,052)

Condition: new, Year of construction: 2026, functionality: fully functional, ATTENTION!!! SPECIAL OFFER!!! LAST ONE LEFT!! Features: Semi-automatic operation Hydraulic control of arm movement (up – down), with smooth adjustment of descent speed Arm position memory function Hydraulically controlled vice jaws Hydraulic cutting clamp included Hydraulic band tensioning Band cleaning brush Cooling system Bimetal band saw CE Declaration of Conformity Technical data: Type: Semi-automatic column type Control: control panel at the front of the machine Maximum cutting diameter: 350 mm, 400 x 350 mm Arm lifting: Hydraulic Arm lowering: Hydraulic Lodpfxjy Tipno Ammjhh Bandsaw speed: 25/60/75 m/min Vise: Hydraulic Min. cutting diameter 5 mm Min. material length in the vise 30 mm Distance from the base of the vise to the floor 780 mm Cutting band dimensions 4515 × 34 × 1.1 mm Total power 5.2 kW Belt speed 25/60/75 m/min Dimensions (L×W×H) 2400 × 1250 × 1550 mm Weight 1200 kg Manufacturer: Cormak

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm Lsdpfey N D Nbjx Ammshh saw band length 2720 x 27 x 0,9 mm total power requirement 1,1 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: new, Bandsaw machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Lhedpfx Amedynpcemjh Cutting capacity (round): 225 mm Cutting speed: 20 - 90 m/min Standard equipment includes: - Horizontal clamping device - Length stop - Automatic shut-off after the end of the cut - Chip removal brush - Coolant system - Operating manual

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 Lhedpeudi Unjfx Ammoh 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, Year of construction: 1996, Technical details: Lsdpfxovpt Eyo Ammehh weight of the machine ca.: 1750 kg sawing motor: 2,2 kW total power requirement: 5 kW cutting speed: 17 - 90 m/min cutting diameter: 320 mm cutting range max.: 320 x 320 mm saw band length: 4.930 x 34 x 1,1 mm feed length: max 9x 600 mm dimensions of the machine ca.: 2,6 x 2,4 x 1,40 m Bandsaw automatic, straight cut, min. cutting diameter 10mm, min. cutting length 6mm, min. offcut 15mm (automatic 80mm), max. weight of material 400kg/m, coolant box 60l, pump 16l/min, clamping pressure 20-60bar, dimensions: chipconveyor 2.400x 950mm roller track 2.200 x 950mm, 5pcs. saws (new) 4.930 x 34 x 1,1mm operating manual, *

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, saw blade diameter: 550 mm, grinding wheel diameter: 150 mm, total width: 1,200 mm, total length: 1,200 mm, total height: 1,250 mm, type of input current: three-phase, input current: 4 A, input frequency: 50 Hz, grinding spindle motor power: 1,900 W, input voltage: 400 V, overall weight: 220 kg, spindle speed (min.): 3,700 rpm, Equipment: rotational speed infinitely variable, Loroch SW 550 machine in good working condition, ready for operation. The machine is suitable for professional workshop use. - saw blade dia. from 100 - 550mm Ledpoy Sgqtjfx Ammshh - suitable for HSS saw blades for wood and metal cutting. - HSS saw blades geomeries - A, B, BW, C - Water cooling - additional device for shaping band saw blades - Manual in Czech language (but it is simple machine)

Condition: new, Year of construction: 2026, The CORMAK H-350SA column band saw is a high-performance machine for cutting solid workpieces and profiles in an automatic cycle. Robust body and sturdy saw frame in combination with the column structure ensure excellent rigidity and exceptional stability during cutting even the most difficult-to-cut metals. The cutting-off machine is equipped with PLC control and an easy-to-use touch screen. The undoubted advantage of The unquestionable advantage of this model is its swivel head which allows cutting in the following ranges 0°- 60° - in automatic cycle as well as semi-automatic - infinitely adjustable angle. angle adjustment. Manual and Automatic mode: The cutting-off machine allows both manual operations from the machine control panel in manual mode and an automatic cutting cycle in automatic mode, eliminating the need for constant operator assistance. Vise top pressure: The cutting machine is adapted to package cutting Lhodpfx Amewdunwemeh Automatic Cutting Cycle: In automatic mode, the entire cutting process, including clamping the workpiece, moving it to the specified dimension, lowering the cutting arm and raising it after the cut is completed, is carried out without operator intervention. Panel Controlled Parameters: Cutting parameters such as number of pieces, workpiece dimensions, belt speed, and more, are set and controlled via a control panel with an easy-to-use touchscreen. Robust Construction: The machine body is made of cast iron set on a rigid, space-age slab chassis structure for exceptional rigidity and stability. Cutting belt drive: A powerful three-speed motor, hydraulic belt tension and cooling system and cleaning brush contribute to precise and efficient cutting. Safety System: If the cutting belt breaks, the machine stops automatically, increasing operator safety. Hydraulic Material Feeding System: This system allows the machine to cycle fully automatically, with precise setting of the material feed length. Innovation and ISO Standards: Cormak provides innovative solutions and production in accordance with ISO:90001 and ISO:140001, which demonstrates the high quality, safety and reliability of the product. Technical data: Cutting range Ø350 or 350 x 350 Belt 4515 x 34 x 1.1 mm Cutting speeds 27/45/69 m/min. Total power 4.8kW Hydraulic power pack 0.75kW Coolant pump 0,04kW Belt tensioning hydraulic Feeder stroke 500 mm Load capacity 1500 kg Table height 700 mm Dimensions 2800 x 2200 x 1700 mm Weight 1500kg

Condition: new, Year of construction: 2026, The CORMAK H500SA automatic bandsaw is a technologically advanced double-column metal bandsaw designed for precise and efficient cutting of large steel components, tubes and profiles. With complete process automation, high cutting power and a durable structure, it performs perfectly in serial production and heavy-duty industrial operations. Main Advantages Automatic cutting cycle – the full cutting sequence from loading to arm return is performed without operator involvement. Hydraulic vice and material feed – ensuring fast, firm and precise clamping and feeding of the workpiece. High cutting capacity – suitable for materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning – automatically maintains optimal tension for stable cutting performance. Cooling system and powered cleaning brush – extend blade life and improve surface quality. Construction and Technology The machine is based on a heavy-duty cast-iron and steel structure providing high rigidity and minimising vibrations during operation. The double-column design of the H500SA ensures cutting precision and long-term durability. Equipped with a 7.1 kW main motor and an independent hydraulic system, it delivers reliable performance under continuous use. The frame is inclined at a 3° angle to the work surface for more effective cutting of profiles and sections. The blade is guided by carbide-insert and roller bearings that ensure perfect blade tracking. The movable guide head automatically adjusts to the material width, enhancing stability and reducing blade wear. Precision and Productivity Hydraulically controlled arm feed with smooth pressure adjustment allows precise adaptation to the material being cut. The LCD control panel enables programming of the number and length of cut pieces, as well as real-time monitoring of cutting parameters. The machine automatically detects the end of material, faults, and operation status, ensuring uninterrupted production with maximum efficiency. Applications The CORMAK H500SA is an industrial metal bandsaw recommended for: Steel structure fabrication plants Serial production in metal workshops Cutting heavy steel pipes and profiles Large-scale steel processing and tool steel cutting operations Standard Equipment Full automatic cutting cycle Arm and vice position memory Hydraulic unit and feed system Hydraulic blade tensioning Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade CE Declaration of Conformity Lsdpfxoyctwmj Ammjhh Technical Data Cutting range Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Blade tensioning Hydraulic Feeder stroke 500 mm Load capacity 3 t Table height 600 mm Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2400 kg

Condition: new, Year of construction: 2026, The CORMAK H - 280 SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Cut range Ø280 or 280 x 280 Band saw blade 3505 x 27 x 0.9mm Cut speeds 40/60/80 m/min. Engine 3kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder pitch 500mm Load capacity 1500 kg Dimensions 1750x1900x1550mm Weight 1100 kg Max. cutting range angle 0º ø280 280 × 280 Standard equipment Lhsdpfx Amjiz S Nysmjh work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, Year of construction: 2026, The CORMAK H - 260SA column band saw is a highly efficient machine for cutting bars, pipes and profiles made of steel, cast iron and non-ferrous metals in an automatic cycle. The solid body and strong frame of the saw, combined with the column construction, provide excellent rigidity and an exceptional level of stability during the cutting process of even the most difficult metals to machine. The cutter is equipped with a PLC controller and an easy-to-use touch screen. Automatic band saw work on manual and automatic modes. Manual mode allows you to perform all activities manually from the machine's desktop. Automatic mode - after switching on the machine, the entire cutting cycle, i.e. fixing the cut detail in the vice, its shift to a specific dimension to the cutting tape, leaving the arm to cut and its raising to the desired height after finished cutting takes place without the operator's operation. Cutting parameters, such as the number of pieces of cut details, their dimensions, the speed of the cutting band, the speed of the arm's descent, are set on the control panel. The device automatically stops when the series is cut, the cutting band breaks or another failure identified by the cutter's control system is detected. The body of the machine is a cast iron set on a rigid, spatial plate structure of the casing. Inside the housing there are: a hydraulic unit, a coolant tank with a pump and a chip feeder. The drive of the cutting band based on an inverter-controlled motor ensures smooth regulation in a large range of speeds. The hydraulically forced lowering of the arm is regulated in a wide range by a precise throttle valve. The fast feed system allows you to shorten the time of cutting individual elements. Hydraulic material feeding system ensures a fully automatic working cycle of the machine. The controller equipped with an LCD display allows you to program the operation of the saw, signals the end of the material, communicates errors and informs about the number of cut sections after the programmed time. The maximum material feed length in one stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. Innovativeness and production of CORMAK semi-automatic and automatic series cutters according to norms and standards compliant with ISO:90001 and ISO:140001 certificates, guarantee safety, quality and product reliability. The use of motors licensed by a well-known and respected manufacturer on the global market, one of the world's leaders, ABB, guarantees long and trouble-free operation. Technical data Lhedpfx Amoiz S I Hjmeh Cut range Ø260 or 260 x 260 Tape 3150 x 27 x 0.9mm Cut speeds 40/60/80m/min Engine 2.2kW Hydraulic power pack 0.75kW Coolant pump 0.09kW Feeder stroke 500mm Load capacity 1500 kg Dimensions 1600 x 1800 x 1550mm Weight 1000 kg Max. cutting range angle 0º ø260 260 × 260 Standard equipment work in automatic cycle arm position memory function built-in hydraulic unit vise position memory function change cutting speed motorized belt cleaning brush cooling system bi-metal band saw CE Declaration of Conformity Manual in Polish and English For more information visit our web page

Condition: new, Year of construction: 2026, The CORMAK H400SA automatic bandsaw is a high-performance industrial machine designed for accurate and repeatable cutting of large steel parts, tubes and closed profiles. With its double-column structure and fully automated cutting cycle, it is ideally suited for production facilities, metal workshops and logistics centres dealing with large-scale material processing. Main Advantages Automatic operation – full cutting cycle without operator intervention: clamping, feeding, cutting and arm return. Hydraulic feed and vice system – ensuring fast, safe and precise cutting. Arm and vice position memory – shortens cycle times and increases efficiency in serial production. Cooling system and powered blade cleaning brush – extend blade life and improve cutting quality. Large cutting capacity – materials up to Ø400 mm or 400 × 400 mm. Construction and Technology The double-column CORMAK H400SA bandsaw is built on a robust welded steel frame with a cast-iron body, ensuring maximum rigidity and vibration damping. The saw arm is set at a 3° angle relative to the work table, which facilitates cutting of profiles and hollow sections. Precision and Productivity Hydraulically controlled arm feed with adjustable cutting pressure and precision throttle valve allows accurate adaptation to various materials. The hydraulic feeding system with electronic control enables programming of cutting length and quantity. The LCD display provides information about progress, errors, and material status. An automatic stop system halts operation in case of faults or programme completion, ensuring safe and efficient performance. Applications The CORMAK H400SA model is ideal for: Metalworking and steel construction industries Profile and section processing centres Serial production in workshops and industrial plants Logistics companies cutting materials to size Standard Equipment Automatic working cycle Arm and vice position memory Hydraulic unit and feed system Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade for metal CE Declaration of Conformity Technical and Operation Manual (DTR) TECHNICAL PARAMETERS Cutting range Ø400 mm or 400 × 400 mm Blade dimensions 4900 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 4.6 kW Hydraulic power unit 1.5 kW Ljdpfx Ameyctr Rsmjhh Coolant pump 0.09 kW Feeder stroke 500 mm Machine dimensions (L × W × H) 2600 × 2400 × 1700 mm Weight 1800 kg

Condition: good (used), Year of construction: 2000, Offer 24477 Technical Specifications: Ledpfx Amjy H Dmhjmohh - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Lhjdpfx Aey Nuhnommeh Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included Lhedpfx Ajy E Uk Iommsh • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length Ledofg E Hyspfx Ammohh of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, cutting diameter 300 mm Lhjdofg E H Eopfx Ammsh saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: good (used), Alber sharpening machine for band saw blades Blade width 50 - 206mm Ljdpfxjglui As Ammehh Tooth pitch 20 - 50mm

Condition: excellent (used), Fully automatic band saw planing machine Oppliger Type PBS 860 Lhodpfxsd Sr Sie Ammsh

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 27600 € 527.16 € Doppelsäulenführung 5750 x 41 x 1,3 mm Lhodpfoynnhqex Ammeh 15 - 120 m/min 460 mm 460 mm 520 x 460 mm 585 mm 0.55 kW 4 kW 0.12 kW 3000 mm 1200 mm 1800 mm 1650 kg Roller feed with manually adjustable stop with micro switch Piece counter Linear guide 41 mm saw blade Control panel Hydraulic vice Hydromechanical blade tension Heavy duty gearbox Coolant device Mechanical upper clamping Pressure adjustment Inverter for stepless blade speed Roller conveyor 1.2 m Chip brush Optical height adjustment Operating instructions in GERMAN or ENGLISH

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 54900 € 1037.61 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 440 mm, quadrat 440 rund 430 mm, quadrat 430 rund 320 mm, quadrat 260 807,5 mm Lsdpfsynnhdox Ammjhh 1.1 kW 4 kW 0.12 kW 2850 mm 2350 mm 2000 mm 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,--

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 22700 € 435.84 € Doppelsäulenführung 4800x34x1,1 mm 20-100 m/min 380 mm 380 mm 430x380 mm 590 mm 0.55 kW 3 kW 0.12 kW 2900 mm 950 mm Lhodpfx Amjynng Tsmsh 1660 mm 1342 kg blade brush control panel hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 72800 € 1375.92 € Doppelsäulenführung 9500x54x1,6 mm 20-100 m/min 1020 mm 1020 mm 1020x1020 mm rund 675 mm, quadrat 675 535 mm 2.2 kW 7.5 kW 0.12 kW Lhsdpfx Ameynng Hemeh 4500 mm 1700 mm 2750 mm 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping chip conveyer turn table for turning the machine for mitre cutting roller tables and band saw blades

Condition: new, neu ca. 4-6 Monate ab Auftrag Türkei 30900 € 590.19 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min Lhedpfx Amoynm Rwemeh 560 mm 560 mm 570x560 mm 590 mm 1.1 kW 4 kW 0.12 kW 500 mm 1050 mm 2050 mm 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61900 € 1169.91 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 540 mm 540 mm 670x540 mm rund 540 mm, quadrat 540 rund 510 mm, quadrat 510 rund 270 mm, quadrat 250 805 mm 2.2 kW 4 kW 0.12 kW 3100 mm 2350 mm 2150 mm 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage Lsdpfx Asynm Rqommjhh material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 46700 € 891.97 € Doppelsäulenführung 8200x41x1,3 mm 20-100 m/min 810 mm 750 mm 910x750 mm rund 600 mm, quadrat 600 rund 360 mm, quadrat 360 725 mm 4 kW 0.12 kW 4020 mm 1600 mm 2450 mm 3970 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame Lhjdpfeynm Rkjx Ammeh user manual in GERMAN or ENGLISH OPTIONS: Hydraulic vertical clamping Micro cooling unit Laser liner