Used Furis Group Face Mask Machine for sale (68,479)

Condition: new, Year of construction: 2026, - External dimensions: 8125x4650x4600 mm - Internal dimensions: 8000x4500x3800 mm - Entrance gate: 4000x3800 mm (four wings) - Service door: 640x1800 mm - Construction: high-grade steel - Heat exchanger: high-grade steel - Panels: filled with mineral wool - Total power: 22kW - Seating: inside/outside (after prior roofing of the cabin by the customer on his own) - Floor fully grated - Air supply system: Jet turbine 5.5kW - 2 pieces - Exhaust system: Jet turbine 7.5kW - 1 piece - Ceiling lights: Coffers with LED fluorescent lamps 36pcs. - Side lights: LED panel 120x30cm - 12 pcs. Iiodpfx Aenbdlbob Neb Power: 48W - one piece 1000 lumens - Burner Riello RG5S 160-310 kW - The cabin is available in different colors

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min Iodoy Nd Siepfx Ab Noib workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: V00311, bending radius (max.): 135 mm, working height: 1,100 mm, workpiece weight (max.): 2,500 kg, tool diameter: 60 mm, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece weight: 2,500 kg Bending capacity: 63 x 4 mm Usable bending length with physical tube stop: 3,000 mm Working height: 1,100 mm Tool diameter: 60 mm Maximum bending radius: 135 mm MACHINE DETAILS Voltage: 400 V ±10% Permissible voltage fluctuation: max. -15% for 1 minute Frequency: 47-63 Hz Isdpey Sma Uefx Ab Nsib Installed power NC1: 9.70 kW Installed power NC2: 9.88 kW Rated current: 31 A Control voltage: 24 V DC CNC voltage: 24 V DC Electrical protection rating: IP55 Dimensions (L x W x H): 4,581 x 1,093 x 1,372 mm EQUIPMENT OD 21.3 x 3.2 mm CLR 2.5D (bending tool, clamping jaw, die, pressure bar and POB clamp) OD 25 x 3 mm CLR 2.5D (bending tool, clamping jaw, die, pressure bar and POB clamp) OD 26.9 x 2.5 mm CLR 2.5D (bending tool, clamping jaw, die, pressure bar, mandrel and POB clamp)

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Iodpey Sd Tlefx Ab Noib Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: used, Year of construction: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste. Iisdpfoynr Axsx Ab Nob Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Key Features: - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway - Adjustable fill heights and speeds to accommodate tubs from small family sizes to larger multi-serve formats - Hygienic design with easy-clean sanitary surfaces, CIP compatible components, and sealed guarding - User-friendly interface for quick changeovers and reduced operator training time - Heavy-duty construction suited for continuous production environments - Smooth, low-shear filling preserves ice cream structure and reduces air entrainment - Optional integrations for lid placement, sealing, date coding, and packing conveyors Whether you’re scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers dependable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety offerings. Cup size: 200 x 100 mm (LxW) Granular application: Available Main filling: Available Cap Closing: Available Stations: Cup Dispenser > Filler > Granular Filler > Lid Closing > Outlet Conveyor Condition: Good Available: Immediately

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 0751801060702, For sale: BLM GROUP BLM LT FIBER tube and profile laser cutting machine with Active Scanner, equipped with an IPG Photonics YLS-2000-CUT 2000 W laser source. The machine is fully operational, both technically and in production, and is in continuous use at a manufacturing facility (current laser beam operating time: 6,950 hours). The machine features an integrated automatic material loading and unloading system, significantly increasing production efficiency and operator convenience. Technical data: • Model: LT FIBER • Laser type: Fiber • Laser source: IPG YLS-2000-CUT • Laser power: 2 kW Ijdpfxey Sf Eie Ab Nsib • Laser source year: 2018 • Power supply: 380 V / 3-phase / 50 Hz • Installed power: 26 kVA • Machine weight: approx. 9,000 kg Machine advantages: • Fully production-ready • Equipped with ACTIVE SCAN and a seam position detection camera • Integrated loading and unloading system • Possibility to perform tests during operation • High cutting quality and precision • Regularly used • Ready for further operation Additional photos and videos of the machine in operation can be provided, as well as the possibility to inspect the machine under power on site. Price upon request

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Iedpfx Ast Ity Dob Neib Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Ijdoxni Iqopfx Ab Njib Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 500 kg, 📄 Product Description The Tongtai SH-5000P is a high-speed, high-rigidity horizontal machining center designed for efficient machining of aluminum and light metal workpieces. It features a compact structure, three-point support bed, high rapid traverse speed, and optional APC (Automatic Pallet Changer). The built-in spindle provides high speed and precision, ideal for automotive and general manufacturing industries. ⚙️ Technical Parameters Isdpexnizdefx Ab Noib Strokes on X/Y/Z: 730/730/830mm B axis rotary table: 0,001º indexing table Rapid traverse on X/Y/Z: 60/60/60 m/min Acceleration (X/Y/Z): 9.8 m/s Spindle Speed: 15,000 rpm. Tool Capacity: 60 pieces (upgraded from standard 40). Chip-to-Chip Time: 3.6 s (at 1,800 rpm). Pallet Dimensions: 500 x 500 mm. Max. Workpiece Height: 1,000 mm. Max. Rotation Diameter: 500 mm. Max. Table Load: 500 kg. Automatic Pallet Changer (APC): Included, with a 7 s changeover time. Machine size (Width x Depth x Height): 5,840 x 2,290 x 2,892 mm Machine weight: 12,400 kg. CNC Control: Siemens Sinumerik 840 D with 15" Display and Shopmill interface Internal Cooling: CTS (Coolant Through Spindle) at 70 Bar. Peripheral Equipment: Includes a Disc-type Oil Skimmer and an Oil Mist Collector. Energy Efficiency: Equipped with energy-efficient drives. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 2016, condition: ready for operation (used), - USED - CO2 TUBE LASER CUTTING MACHINE WITH LOADING/UNLOADING SYSTEM MAX CUTTING THICKNESS: 16 mm mm MIN CIRCULAR SECTION: 80 mm MAX CIRCULAR SECTION: 610 mm Iijdpfx Ajytkdlob Neb MAX SQUARE SECTION: 400x400 mm MAX RECTANGULAR SECTION: 500x300 mm SOURCE: ROFIN DC045 ; 4500 W CONTROL UNIT: SIEMENS 840D WEIGHT: 100000 Kg ACCESSORIES: FUME EXHAUSTER NOTE: LENGTH OF LOADING BAR MIN.4.000-MAX 18.000 mm; LENGTH OF UNLOADING BAR MIN. 3.000 - MAX 12.500 mm; SHORT PIECE UNLOADING LENGTH UP TO 3.200 mm; 3D HEAD; CAPACITIVE SENSOR; AUTOMATIC SETTINGS; BOOSTER; FOCUS AUTOMATIC ADJUSTMENT

Condition: used, Year of construction: 1997, KEG-plant Isdpfsxbqh Ssx Ab Neib Additional title: inside cleaning and filling plant Performance: 20 KEG`s/h wash and fill with 30 l KEGs Power: 8 kW Voltage: 400 V Frequency: 50 Hz Length: 1400 mm Width: 1100 mm Height: 2300 mm Weight: 250 kg Formats: 10 - 50 l KEG drums with flat fitting Operation / Control: OP7 operating console, Siemens Simatic S5 - 95U Material: Edelstahl Position: frei stehend Base construction: Square tube construction on dome feet Features: 1 tank for cleaning agent, electrically heated; 1 combination cleaning and filling station with flat fitting, 1 stainless steel pump, 1 stainless steel control cabinet

Condition: used, Flash pasteurising to stabilise beverage quality. The product is heated via a plate heat exchanger and held at pasteurising temperature for a defined amount of time, after which it is then cooled down again. Capacity: 350 hl/h Operation / Control: Excluding control cabinet with software. Software can be delivered by agreement Iedpfoxbn Ucsx Ab Noib Features: 1x plate heat exchanger, 1 tube heat exchanger, 1x hot water pump, 2x beer pump

Condition: used, Year of construction: 2013, Additional title: high pressure homogenizing Capacity range: 600 l/h Pressure: 250 bar Cellular particle size: 1 μm cellular particle Length: ca. 2,2 m Width: ca. 2,5 m Height: ca. 1,9 m Isdpovcq Edjfx Ab Nsib Operation / Control: Integrated in a ProLeit process control, the motor was controlled by an external frequency converter. Features: CIP-able, SIP-able

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 106 mm, turning length: 2,130 mm, turning diameter: 650 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,290 mm, total width: 2,553 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 106 mm, nominal power (apparent): 20 kVA, number of spindles: 1, spindle nose: A1-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 119,500.00!!!!! The machine is immediately available and NEW. Iiodpfey Hqhfjx Ab Neb Delivery of the machine in overseas packaging from our warehouse. (Transport of the machine at the buyer’s expense) Operating materials to be provided by the buyer. Commissioning and training by Milltronics: EUR 5,000.00 Leasing possible (subject to creditworthiness) Machine Details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automatic sequences • Custom macros available • Override potentiometers for axes and spindle • Spindle load monitoring • Key switch to lock EDIT function • Lights to indicate operating status • Additional “M” function with CNC wait channel • Constant cutting speed • Rigid tapping • Spindle speed 30 – 1,600 rpm • Spindle motor 18 / 11 kW, 2-stage electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 positions 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One tool holder for boring bars 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list and circuit diagrams in digital format • Operating manual and maintenance manual in digital format • Transformer for standard industrial power supply 400 volts, 3 phase • Lifting brackets for crane transport Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in combination with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Travelling steady rest with brass pads, range 20 mm - 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Foot mat with Milltronics logo

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm Iiodpfxey Du N Ue Ab Nob MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Iiodpfx Abounia Hs Njb

Condition: new, Year of construction: 2023, functionality: fully functional, Equipment: CE marking, documentation/manual, The mini-silo operating under vacuum is equipped with high-density antistatic polyester filter sleeves and features a continuous cleaning system utilizing compressed air pulses. This mini-silo includes a storage chamber with a capacity of 12 m³. Dimensions [mm]: 2480 x 2480 x (h) ~ 11300 Maximum storage capacity [m³]: 12 System: Multi-exhaust with motor drive and rotating blades, featuring 3 independent outlets Number of filter sleeves: 169 Filter sleeve dimensions [mm]: Ø 125 x (h) 2500 Iiedoy Iy Rrepfx Ab Neb Filter material: Antistatic polyester Weight [g/m²]: 500 Filtration area [m²]: 166 Filter cleaning system: Automatic with compressed air, featuring a consumption optimizer

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 475 mm, table width: 450 mm, table length: 1,200 mm, table load: 400 kg, overall weight: 2,300 kg, We offer this used Abene Machine Ab VHF-360Ti milling machine, year of construction 2011. Serial number: 36120 Year of manufacture: 2011 Heidenhain TNC620-control Table size 1200 x 450 mm Max load 400 kg X-travel 650 mm, Y-travel 480 mm, Z-travel 475 mm Spindle BT40 Iijdpfx Asy Hgnheb Njb Main motor 7,5 kW Weigth 2300 kg Excellent condition If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. Iijdpfx Aboymn Hwj Neb You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: LCS300-4T, CNC machine Elcede, type LCS300-4T, year of manufacture 12/2001, 400/50 Hz, working area 305 x 152.5 cm, machine dimensions 545 x 280 x 233 cm (height), control cabinet 80 x 64.5 x 190 cm (height), PC cabinet 84 x 75 x 198 cm (height), 3x Dietz fans, + cooling unit KKT-krans KLB-S26T-RS, year of manufacture 2001, 400V, 144 x 90.5 x 161 cm (height), 50,640 operating hours, desk with Fukitsu desktop, password Defi123+, desk 170 x 75 x 78 cm (height), in operation. Isdpfx Absy D Hwws Nsib

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Iisdpfx Aoy D S Unob Neb Weight: 700 kg EQUIPMENT RNA Vibratory Feeder (diameter: approx. 800 mm) External reference: 33

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 2,200 mm, total width: 1,000 mm, total height: 1,600 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! MACHINE DETAILS Iisdpfxoy D S S Ho Ab Njb Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,000 x 1,600 mm Weight: 700 kg EQUIPMENT RNA vibratory feeder (diameter: 800 mm) External reference: 34

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Iedpfjx Utd Eox Ab Noib Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* Iedsy Ehrfopfx Ab Njib complete with an motorized wire decoiler table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: used, Year of construction: 2009, functionality: fully functional, overall weight: 452 kg, Surface Planer/Thicknesser, Planer TECNOMAX FS 41 elite – after technical inspection, ready for operation Specification: • Condition – used, after comprehensive technical inspection • Manufacturer – TECNOMAX (SCM Group) • Model – FS 41 elite • Working width – 410 mm • Thicknessing working height – 240 mm • Table length – 200 cm • Sound-dampening combs at the cutter block • 3.0 kW motor • 3-knife cutter block for traditional blades • Extraction port diameter 120 mm • 2 feed speeds (6 and 12 m/min) • Original paintwork • Weight – 452 kg • Year of manufacture – 2009 • Overall dimensions – 220 x 90 x 100 cm (L x W x H) Additional information: Iedpfx Ajy Inuxeb Nsib • The machine is in good technical condition, ready for immediate use • The photos shown represent the actual condition of the item for sale • Possibility to power up and test the machine on site • The auction price does not include VAT or transport costs Financing and transport: • We organize transport via the MDD fleet, courier companies, or external carriers • We provide financial support in the form of leasing or lease loan options