Used Gardner Byk Gardner Spectro Guide for sale (4,718)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The following three-part packaging line is offered on behalf of the owner, consisting of: + One semi-automatic L-sealer Sealing frame: 900 x 700 mm Product conveyor belt Film separator sheet Film roll holder for PO and PE films Machine is mobile 230 V, 3 m cable Year of manufacture: 2013, manufacturer unknown + One shrink tunnel Pass-through height: 250 mm Pass-through width: 500 mm Tunnel length (hood): 1,300 mm Bwodpfjxq Hcqox Ahmou Rod spacing: 25 mm Three-phase current, 16 A and + One product conveyor belt 1,000 x 400 mm Adjustable side guides Harting connector The machine comes from a demonstration room, has correspondingly few operating hours, and is therefore in very good overall condition. The machine location is Salzgitter. The total price of 4,275 euros is ex works, unpacked, plus VAT. The individual components of the line can also be purchased separately. The individual prices – also ex works, unpacked, plus VAT – are as follows: L-sealer: 1,485 euros Shrink tunnel: 2,250 euros Product conveyor belt: 540 euros

Condition: used, mileage: 525,500 km, power: 375 kW (509.86 HP), first registration: 04/2017, fuel type: diesel, number of seats: 56, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, Van Hool TX17 Acron Panoramic glass roof 56 seats installed - up to 64 seats possible * DAF engine, 375 kW, Euro 6 * ZF AS-Tronic automatic transmission * Retarder * ESP, ABS, ASR * Emergency brake assist * Lane departure warning system * Adaptive cruise control * 54+1+1 seats with seat belts * Up to 64 seats possible as per approval & CoC (only 54+1+1 currently installed) * Reclining sleeper seats, adjustable longitudinally and laterally, with armrests, leather headrests and side bolsters * Tables, nets, footrests * Automatic climate control * Webasto auxiliary heater * Tour guide seat * Tour guide locker (with water connection, e.g. for espresso machine) * Service sets with individual air vents, reading lights & attendant call button * Enclosed overhead luggage racks * DVD video system with 3 electric flat screens * Additional monitor for the tour guide * Front camera * 230 V power supply * USB sockets at every double seat * Radio, CD MP3, microphone * Ambient LED spot lighting * Panoramic glass roof * 2 roof hatches with glazing * Toilet * Adaptive cruise control * Lifting and lowering system * Reversing camera Bwodpsyfy Spefx Ahmsu * Bluetooth telephony * Bi-xenon headlights * Fog lights * Sleeper cabin * Electric roller blind for windscreen * Electrically adjustable, heated exterior mirrors * On-board computer * Multifunction steering wheel * Air-suspended driver’s seat with 3 cushions, armrests * Separate driver's door * Underfloor vacuum cleaner * Massive luggage compartment with parallel opening lids * Ski box attachment points * ALCOA alloy wheels Viewing possible at any time by prior appointment! All information provided without guarantee. Subject to errors and prior sale! More info: also via WhatsApp) Info in Polish available via WhatsApp) Your French-speaking contact: Georges Spengelin

Condition: ready for operation (used), Year of construction: 1989, total width: 4,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 140 mm, product length (max.): 2,000 mm, number of axes: 2, This Schaudt Mikrosa SASL 125 was manufactured in 1989. A centerless external grinding machine, it features NC-controlled operations and hydrodynamic axis bearing. Both wheels can be dressed via a controlled axis. Refurbished by UHLMAN Werkzeugmaschinen-Service in 2021/22, it has been regularly maintained. Consider the opportunity to buy this Schaudt Mikrosa SASL 125 centerless grinding machine. Contact us for more information. Retroffited & Overhauled in 2021/22 Working range: • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 500 mm: 140 mm • Maximum workpiece diameter • that can be ground • with a grinding wheel Ø 630 mm: 80 mm • Minimum workpiece diameter that can be ground: 3.5 mm • Maximum workpiece length for through-feed grinding: 200 mm • Maximum workpiece length in plunge grinding 245 mm • Maximum grindable profile depth on the workpiece 25 mm Grinding wheel: Bwsdpox Enapofx Ahmou • Maximum outer diameter 500 or 630 mm • Minimum outer diameter 380 mm • Maximum grinding wheel width 250 mm • Grinding wheel bore 305 mm • Guide wheel: • Maximum guide wheel outer diameter 315 mm • Maximum guide wheel width 250 mm • Bore diameter 127 mm Power requirements: • Power consumption approx. 33 kW Additional equipment • Optional: Additional equipment available Machine Benefits Technical Machine Benefits • Hydrodynamic axis bearing • Regular maintenance during series production

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 232597, functionality: fully functional, cutting height (max.): 320 mm, overall weight: 2,100 kg, controller model: Siemens Simatic HMI, throat depth: 370 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from November 16, 2026, to November 26, 2026! TECHNICAL DETAILS Bwedpfoz Ilvzex Ahmju Belt length: 5,080 mm Belt speed: 250–2,000 m/min Maximum cutting height: 320 mm Overhang: 370 mm Guide rod, hydraulic lift: 200 mm Belt tension, hydraulic lift: 60 mm Material support height: 1,200 mm Roller diameter: 630 mm MACHINE DETAILS Control: Siemens Simatic HMI Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Bwodpfx Aovvi N Iohmsu

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bwodpfx Aevvkipohmju

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: A-251101 + A-251102, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 12 mm, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 4 A, year of last overhaul: 2026, cutting height (max.): 150 mm, A-251101 Slicer: For sale: Item A251101. Holly Slicer, painted frame and stainless steel body. Machine information: Total machine length: 1.9 meters Total machine width: 1.0 meters Total machine height: 2.1 meters Machine working height: 0.9 meters Machine capacity: 1800 loaves per hour Electrical information: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: CeeForm 5-pin 16 Amp. (round red plug.) Compressed air: Not required. Minimum and maximum product dimensions: Products from 100 to 320 mm long. Products from 80 to 210 mm wide. Products from 40 to 150 mm high. Machine version: Frame made of painted steel, RAL 7046. Deck, stainless steel ASI 304 and plastic rollers and 2 side belts, manufacturer Hoba. Band slicing machine, mounted on nylon wheels. A-251102: Semi-automatic packaging line. Item A-251102 Refurbished semi-automatic (manual) packaging line equipped with a blowing table, Kwik Lok brush machine, and clip-closing machine. Semi-automatic (manual) painted packaging line equipped with a Kwik Lok brush machine, type 1082, a Kwik Lok clip-closing machine, type 871A, and a bag-opening blowing table. Machine direction of operation: left to right Machine information: Total machine length: 3.5 meters Total machine width: 1.5 meters (including blowing table) Total machine height: 1.8 meters Working height: 0.75 meters Length of conveyor section: 1.8 meters Length of roller conveyor: 1.0 meter Conveyor flight spacing: 305 mm Machine capacity: 1800 packages per hour Bedez Ervpopfx Ahmjwu Electrical information: Power supply: 400 V, N + PE Connected load: 1.2 kW Plug type: CEE-Form, 5-pin, 16 A (round red plug) Compressed air required: No Minimum and maximum product dimensions: Product length: 100–350 mm Product width: 80–210 mm Product height: 40–160 mm Machine description: The frame and both leg assemblies are manufactured from painted profiles, manufactured by Waterlander. The machine is equipped with a Kwiklok brush machine, model 1082, and a Kwik Lok clip-closing machine, model 872, year 1995 (completely rebuilt), suitable for Kwik Lok JNRP clips and Schutte clips. At the end of the packaging line, a 1-meter-long roller conveyor is provided for manually removing the packaged products. The machine is mounted on wheels and is equipped with conveyor flights with a fixed transport speed. The machine is fitted with a completely new control system and has been fully refurbished. The machine is finished with a two-component, high-durability topcoat. The machine is suitable for packaging food and non-food products in plastic bags. Included: with the machine, a painted Hoba blowing table, stainless-steel top surface, and product guides.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, * Okuma Millac 852V II / 50. * Machine in excellent condition with very few operating hours. * Machine designed for high chip removal capacity. * Prismatic guides on all axes. * Quadruple prismatic guide system on the Y-axis. * Extremely rigid structure. * Oil-fed guide lubrication system with automatic machine shutdown. * Renishaw tool presetter. * BT 50 spindle taper. * High-torque motor power: 18.5 kW. * Cutting force: 580 N/m. * Chip removal capacity: 540 cm/min. * Okuma IGF OSP300 automatic conversational programming system. * Automatic force control and tool wear monitoring. * Parameterized automatic tool collision avoidance system. * Communication ports via USB, PCMCIA card, and RS-232. * Tool life management and tool consumption tracking. * Automatic control of tool torque and stresses. * Table dimensions: 2,200 x 850 mm * Maximum load capacity: 2,500 kg. * Spindle speed: 6,000 rpm. * X-axis travel: 2,050 mm. * Y-axis travel: 850 mm. * Z-axis travel: 750 mm. * Spindle oil cooler. * Rapid traverse speed: 20,000 mm/min. * Tool magazine capacity: 36 tools. * Tool change time: 0.5 seconds. * Chip-to-chip time: 5 seconds. Bjdpfx Ahsz E Dytjmewu * Independent Knoll coolant system with 70 bar pressure. * 30-micron particulate filter system. * LTA smoke filtration equipment. * Hinge-type rear chip extractors. * Machine currently in production. * Can be inspected by a certified Okuma technician. * Condition like new. * Extensive set of BT 50 collets. * Electrical transformer, documentation, parts list, electrical schematics, and programming and operations manual. * Machine weight: 20,500 kg. * Immediate delivery, unless sold immediately.

Condition: used, Year of construction: 2006, Overview This KHS Innopack SP, built in 2006, is a pick-and-place case packer for bottles. Empty cases run on the case conveyor into the packing zone, where they are stopped and centred; the gripper head picks the bottle formation from the four-lane infeed table and sets it into the cases. The lifting unit travels on a vertical lifting column with counterweight, and the motion is controlled by a KUKA KR C2 controller with KCP teach pendant. Four change-part trolleys with gripper heads for different bottle sizes are included. The packer is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack SP - Year of manufacture: 2006 - Machine type: pick-and-place case packer - Bottle infeed: 4 lanes, lane width 85 mm - Gripper head: 2 x 18 bottle tulips, formation 3 x 6 bottles - Case clearance: 175 x 400 mm - Power supply packer: 400 V, 3 Ph, 50 Hz, 27 A - Robot controller: KUKA KR C2, 400 V, 3 Ph, 50/60 Hz, 8 A - Overall dimensions (L x W x H): 6,000 x 3,250 x 3,650 mm - Change-part trolleys: 4 units, each 2,050 x 1,300 x 2,100 mm Equipment - Base frame with lifting column, counterweight and lifting unit - Cross conveyor and shifting carriage for the gripper head - Gripper head with pneumatic bottle tulips - Centring device for the cases in the packing zone - Four-lane bottle infeed table with lane guides - Case infeed and outfeed conveyors - Enclosure with windowed doors and safety fencing - KUKA KR C2 controller cabinet and KCP teach pendant on stand - KHS control cabinet - 4 change-part trolleys with gripper heads for different bottle sizes - Operating manual (Dutch) available Condition Bwsdpfez Hbxiex Ahmou Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This Kematec MBK 12 AS, built in 2006, places shrink capsules on wine bottles and shrinks them on in 12 heating stations. It runs at 3,000 - 12,000 bottles per hour and covers bottle heights of 235 - 360 mm and bottle diameters of 50 - 115 mm. The machine is still installed in a wine bottling line and can be inspected on site. Technical data - Manufacturer: Kematec - Model: MBK 12 AS - Year of manufacture: 2006 - Machine type: capsule placing and shrinking machine - Output: 3,000 - 12,000 bottles/h - Capsules: shrink capsules, max. length 80 mm, max. diameter 40 mm - Head diameter: 33 mm - Heating stations: 12 - Capsule magazine: 1,800 capsules - Bottle height: 235 - 360 mm - Bottle diameter: 50 - 115 mm - Working height: 1,100 mm (+/- 50 mm) - Direction of travel: left to right - Power supply: 400 V, 50 Hz; main drive 0.75 kW - Compressed air: 6 - 7 bar, approx. 350 l/min Bodpfx Aez Hbzkjhmowu - Overall dimensions (L x W x H): 3,700 x 2,500 x 2,580 mm - Weight: approx. 1,400 kg Equipment - Capsule magazine with multi-level storage shelves and capsule feed - Rotary capsule placing turret - Rotary shrinking turret with 12 heating stations - Bottle infeed and outfeed on slat chain conveyor with guide rails - Siemens touch panel (French, Dutch, German) with fault list, emergency stop and signal tower - Control cabinet with PLC - Stainless steel frame, enclosure with transparent guard doors - CE marked; operating manual with spare parts list available Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, Year of construction: 2006, Overview This KHS Innopack CA-1, built in 2006, is a carton erector that forms cartons from flat blanks and closes their bottom with hot-melt glue. Blank stacks are fed on a roller conveyor into the magazine; suction grippers pick each blank, erect it, fold the inner bottom flaps, apply glue with a Robatech hot-melt unit, close and press the outer flaps and discharge the carton onto the outfeed roller conveyor. The machine is still installed in a wine bottling and packaging line and can be inspected on site. Technical data - Manufacturer: KHS - Model: Innopack CA-1 - Year of manufacture: 2006 - Machine type: carton erector with bottom gluing - Glue system: Robatech Concept hot-melt unit with glue nozzles for the bottom flaps - Power supply: 400 V, 3 Ph, 50 Hz, 15 A - Compressed air: min. 5 bar operating pressure - Overall dimensions (L x W x H): 4,550 x 3,450 x 2,720 mm - Blank infeed: roller conveyor with stainless steel rollers, roller width 1,000 mm, infeed clearance 800 x 450 mm - Outfeed: roller conveyor with stainless steel rollers, roller width 300 mm, 3,050 x 650 x 880 mm Equipment - Stack preparation with automatic loading of the blank magazine - Blank magazine with lifting device, side guides and front and rear stops - Pick-up and erecting stations with vacuum suction grippers and vacuum unit - Folding, gluing, closing and pressing devices for the carton bottom - Side and height adjustment by handwheel for different carton sizes - Enclosure with windowed safety doors - Operator panel with display, keypad, start/stop, key switch and emergency stop; operator texts in French - Control cabinet and pneumatic service unit - CE marked; operating manual (Dutch) available Bodpfx Ahez Hcivjmswu Condition Still installed. An inspection on site is possible. Availability Available immediately. Location: Belgium.

Condition: used, mileage: 32,900 km, power: 130 kW (176.75 HP), first registration: 06/2025, fuel type: diesel, color: black, gearing type: automatic, emission class: euro6, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Offer on behalf of the customer. The sale is carried out directly by the customer. * Hill start assist * Exhaust system, EU6e (EA) * Trailer hitch, removable * Towing eye in the front * Airbag for driver and front passenger, with front passenger airbag deactivation * Roof console with storage compartments, one 1-DIN slot, and reading light (only with 2nd evaporator) * Sun visors, foldable and swiveling sideways, with wide-angle mirror on the passenger side * Exterior mirrors, electrically adjustable, heated, and foldable * Exterior mirrors left and right, convex, with integrated LED turn signal and wide-angle field * Front-wheel drive * Emergency brake assist Bwedsz Hhtmopfx Ahmou * Battery 520 A (92 Ah) * Rubber floor in the driver's cab * Electronic parking brake * ESP with electronic differential lock, anti-slip regulation (ASR) and ABS * 230V socket in the left seat frame * H2 - Normal roof * Rear step, across half the width * Immobilizer, electronic * Parking assist system (PDC) front and rear * Grab handles on the rear pillars * USB Type-C data and charging ports with increased charging power * Daytime running lights with assistant driving lights and coming and leaving home function * Premium interior noise damping measures * With UNECE CS&SU * 4-cylinder diesel engine 2.0L, unit 03N.G * ACC Stop & Go * 8-speed automatic transmission * Glove compartment with lockable lid, illuminated * Rear wing doors with window cutouts * Rear window, heated, with rear window wiper/washer system * Automatic climate control "Climatronic" in the driver's cab * Side windows in the passenger/cargo area, rear left, fixed * Side windows in the passenger/cargo area, rear right, fixed * LED headlights with LED daytime running lights * LED interior lighting concept in the passenger/cargo area * Anti-dazzle interior mirror * Child safety lock * Standard climate zones * Traffic sign recognition * Rear view camera system with dynamic guide lines * High beam assistant "Light Assist" * Leather multifunction steering wheel, heated with Tiptronic * 4 speakers: 2 tweeters, 2 woofers * Digital instrument cluster * Attention and fatigue warning system * MAN SmartLink * Not for hot climates * 130 kW (LD) * Fog lights including cornering lights * MAN Connect * MAN Media Van Navigation Business (12.9 inches) * 12V socket, cup holder * Tire pressure monitoring system * L3 - Standard * Three-point automatic seat belts with height adjustment * Side windows front and rear, and rear window in heat-absorbing glass, darkened from the B-pillar (Privacy) * 12V sockets in the driver's cab * Suspension seat "ergoActive" left * Seat "Comfort Plus" right * Seat belt control, electric contact in the seat belt buckle, driver and front passenger seat * Seat covers in leather / Alcantara * Seat heating for driver and front passenger seats, separately adjustable * Side marker lights * 2 remote control keys * Approval as 3.5t * Start-stop system with brake energy recovery * Lane change assistant * Side wind assist * Headlight cleaning system, washer fluid level indicator, heated windshield washer nozzles * Windshield wiper intermittent control with light and rain sensor * Special-purpose vehicle (LNFZ) version with up to 3 seats * Keyless Go with SAFELOCK * Sliding door, right, with intermediate locking * Blind spot warning system on both sides and departure warning * Lane keeping assist plus traffic jam assist * Preparation for alcohol interlock * Intelligent speed assistant * Multifunctional front camera *

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x6, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 5,800 mm, loading space width: 2,480 mm, loading space height: 800 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - All-wheel drive - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Air horn Bwodpfx Asz Hkcwjhmju - Particle filter - Radio/Multimedia system - Rear view camera - Sunroof - Sleeper cab - Seat heating - Sun visor - Stability control - Auxiliary heater - Automatic heating system - Toolbox Internal number for customer inquiries: 4-093 MAN TGS 33.520 6x6 BL with wheelbase 4,200 mm !!! ALL-WHEEL DRIVE !!! !! IMMEDIATELY AVAILABLE IN STOCK !! As a special flatbed truck with a Fassi F235 loading crane. !!! Crane exchange to F235 6-section boom or F255 with 4 or 6 sections possible for an extra charge. EURO 6E !! Cab TM: the comfortable one (narrow, long, medium height) * All-wheel drive 6x6 * Suspension type: leaf/air (BL) * 4,200 mm main wheelbase, 1,400 mm wheelbase between rear axles * Diesel engine MAN D2676 LF78, 520 hp, 2,600 Nm torque, Euro 6e * Automatic transmission MAN TipMatic 12.28 OD, with Retarder 35 * Retarder Eco, speed-dependent, adjustable, energy-efficient * High-performance engine brake MAN EVBec, adjustable * Differential locks front, rear, center of the driven rear axles * Trailer coupling ROCKINGER Type 500 G 6A (or 40 on request) * Control panel MAN EasyControl, 4 functions, operable from the outside when the door is open * Driver's comfort seat, air-sprung, with lumbar support, shoulder adjustment and seat heating * Multifunction steering wheel, leather, adjustable in height and tilt * Bunk, lower, with slatted frame and head adjustment * Sunblind, front windshield, inside, electric * Refrigerator, pull-out, and drawer * Infotainment control MAN SmartSelect with touchpad and direct entry * MAN Media System Navigation Professional 12.3 inches * MAN Sound System Advanced with subwoofer * Smartphone integration Superstructure: Flatbed with dimensions 5800 x 2480 x 800 mm Side walls 1x split (2 flaps) per side, with side wall release The floor plate is standard made of laminated, Finnish multi-layer wood with a thickness of 30 mm and is screwed to the outer frame and cross members, which are perforated at an angle of 45°. Tie-down rail recessed in the middle in the direction of travel 4 work lights 2 stainless steel toolboxes, each one to the right and left after the 3rd axle Fassi F235 loading crane: * F235A.2.4 e-dynamic 4-section boom * Load capacity at 12.7 m still 1,345 kg * Swivel range 400° * Double knuckle system with PROL1NK (overextending knuckle arm up to 15°) * Electronic overload cut-off device with FX500 * Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) (Alternatively, linear control system in stock) * Emergency shut-off, as well as optical alarm (90% and 100%) including adjustable digital swivel limit * FASSI stability control FSC incl. LMB II * Control system for 2 additional functions with »2 hose guides for e.g. gripper or tongs (5th & 6th control circuit) * Manual extensions for 5th and 6th section possible for an extra charge Financing is possible with our financing partners. ...

Condition: new, Immediately available Fassi cranes in the respective versions: - Fassi F135 A.0.24 (4-section hydraulic extension) - Fassi F235 A.2.24 (4-section hydraulic extension) - Fassi F235 A.2.26 (6-section hydraulic extension) - Fassi F255 A.2.24 (4-section hydraulic extension) - Fassi F255 A.2.26 (6-section hydraulic extension) - Fassi F545 RA2.28 (8-section hydraulic extension) incl. additional support struts Each with very good equipment: - Control system for 2 additional functions with »2 hose guides for e.g. grapples or clamps (5th & 6th control circuit), with the exception of the F545 - Hydraulic outriggers, operable via remote control - LED work lights - Scanreco remote control with cross-lever, charger and carrying straps - Electronic overload protection system - Emergency shut-off and optical alarm (90% and 100%) including adjustable digital swing limiter - FASSI stability control FSC including LMB II - From F235 model size: double-knee lever system with over-extension of the boom up to 15° - Manual extensions for the 5th and 6th sections available at an extra cost (can be ordered individually for each crane) - For Fassi F545 series = incl. preparation for a winch (the V30 winch can be fully retrofitted at any time) Individual financing is possible with one of our financing partners. Bwedpfoz Hkckjx Ahmsu This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Price: On request

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 23 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 3,000 kg, loading space volume: 38.6 m³, loading space width: 2,300 mm, loading space length: 7,000 mm, loading space height: 2,400 mm, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. Leasing/hire purchase options available. Double-leaf door (DFT) 1 unit in stock, RAL 6004 blue-green 3 units available in the short term, other RAL colors available upon request Technical description: • Internal dimensions: 7000 x 2300 x 2400 mm • Usable volume: 38.6 cbm • Tare weight: 3,000 kg • Floor: 5 mm S235 • Side walls: 3 mm S235 • All sheets and profiles continuously welded • Double-leaf door with safety lock • Warning markings according to DIN 67620 • Container inspected and approved according to DGUV 114-110 • Floor-side wall connection 45° • Hook diameter: 50 mm, S 355 • Hook height: 1570 mm • Top frame: round tube, ∅ 89 mm • Mesh hooks • All moving parts greaseable • Steel guide rollers 159 x 6.3, length 300 mm Bwjdpfx Ahez E Naxomou • Zinc phosphate primer inside and outside, painted outside with synthetic resin paint (80-100 μ) • Permissible total weight: 15,000 kg Other designs and sizes available from stock in Paderborn. You can view our stock on our website. Skip container according to DIN 30720 Errors and prior sale excepted. Photos are for illustrative purposes only! For further questions, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). Bwjdoz Hyyfopfx Ahmju The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. A manual compiled from Deckel descriptions is also included in the scope of delivery.

Condition: used, mileage: 695,000 km, power: 315 kW (428.28 HP), first registration: 04/2015, fuel type: diesel, number of seats: 48, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, soot filter, 48 seats + 2 tour guide seats Alcohol interlock system Armrests for passenger seats Heated windshield Voyage Plus seating Onboard kitchenette Onboard tools Nozzle ventilation 2 flat-screen monitors Bwedpszh Rv Aefx Ahmeu Footrests for passenger seats Luggage rack in the passenger compartment Hydraulic lifting and lowering system TM coffee machine Camera on the E2 axle Folding tables for passenger seats Air conditioning Refrigerator Leather insert in the headrest Reading lights Microphone for the driver Navigation system Powershift transmission Radio with CD player 2 tour guide seats Retarder Rearview camera Tinted side windows Sunshade Voltage converter 24V/220V 220V sockets in each row of seats Cruise control Toilet (switchable between WC and cassette toilet) Safe Central locking Voltage converter 24V/220V

Condition: used, mileage: 60,048 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: ABS, * Special equipment: * Wiedemann & Reichhardt BASIC 1000 Type 11.5-360 Vario superstructure, suction and jetting vehicle, former municipal service vehicle. * 3.0 m³ water / 8.0 m³ sludge, piston in front position * Vessel tube, lid, and base made of stainless steel * Stainless steel baffle plate mounted on sludge tank * Combination unit with telescopic piston, suction hose reel, high-pressure hose reel mounted on a boom with electronic pressure and speed control and display readout Bedpexvfxhjfx Ahmswu * ARCON radio remote control * High-pressure pump: Uraca Type P3-45-60 (Plunger 60 mm, 346 l/min, 205 bar drive power 130 kW, drive speed 1500 rpm), 3,421 operating hours * Vacuum pump: Wiedemann KW 2000 (2000 m³/h) with 4,395 operating hours (liquid ring pump) * Liquid ring pump - power consumption 50 kW, speed 1300 rpm * Liquid ring pump coupled with a pre-charge pump for temperature-dependent water circulation * Suction and high-pressure boom (swivel reel with 2 high-pressure hose reels, which can be operated individually, simultaneously, or synchronously) * Centrally mounted boom for optimal working range on both sides * - hydraulically swivels approx. 180° * - hydraulically telescopes approx. 1,200 mm * Hydraulic cable winch mounted on boom, lifting capacity 250 kg * Suction hose 25 m DN 125 * High-pressure hose reel 200 m DN 25 * Small high-pressure hose reel 80 m DN 13 * Length counter for high-pressure hose * Manhole above tank DN 500 * Hydraulic tilting tank approx. 1 m for maintenance and repair work * Hydraulic oil tank with 80 L capacity * 5 sight glasses on tank lid * Water filling on both sides with level indicator * BEKA-MAX centralized lubrication system for superstructure only, pump type troni X1, runtime 1.5 min or 20 cycles, pause time 4h * Accessories (various nozzles, suction hose DN 125, hose guides, spare parts (cardan shaft, valves, hoses)) * Handwash basin in the right front equipment cabinet, 20 L capacity, with swivel tap and fill unit * Boxes right and left at the rear, approx. 50 L, for storage of return pulleys, nozzles, etc. * Work floodlight (spotlight for shaft illumination), mounted on the boom, with 15 m cable and cable reel * Various work spotlights mounted on both sides of the superstructure * Rotating beacon on the boom and driver’s cab * Holder for manhole hooks at the rear incl. 2 hooks * 2 spring-tension cable reels * Large equipment cabinets mounted to the right and left of the water tank (illuminated), approx. 50 cm deep, aluminum doors opening upwards, gas struts with top locking * Wardrobe positioned over the high-pressure pump with lighting, ventilation slots, and water drain at the bottom * Extendable vice with bracket to the right * Rockinger SK 5 towing coupling * Front axle load 9.5 t * Raised exhaust pipe on right * Exterior mirrors electrically adjustable and heated * Wide-angle mirror with electric maneuvering assistance * Kerb mirror on the right, adjustable and heated * Rear axle differential lock * Air horns on driver's cab roof (2) * Cab: with 2 rear wall windows, tinted * Cab: with air suspension * Flame start system * Toggle brake (EVBec controlled) * Middle seat * PTO NMV 221, i=0.98 n=1470 rpm * Cab socket 12V and 24V * Control module for external data exchange * Additional high/low beam and fog lamps with cornering light * Further equipment: * Reversing camera * Turning camera * Axle configuration: 6x2/4 * Steered trailing axle * Wheelbase 3,600 mm + 1,350 mm * Frame over...

Condition: used, mileage: 651,328 km, power: 220 kW (299.12 HP), first registration: 12/2006, fuel type: diesel, next inspection (TÜV): 04/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro4, number of seats: 53, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty or guarantee, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 G 18m (53+101+1+1 emergency seat) (Vehicle 193) Registration Date: 11.12.2006 651,328 km Engine: 11,967 ccm 220 KW / 300 PS Euro 4 Next inspection: 10/2026, TÜV (technical inspection): 04/2027 Permissible total weight: 28,000 kg, unladen weight: 16,490 kg, payload: 11,510 kg Overall length: 17,940 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 70/50%, middle approximately 80/80%, rear approximately 40/40%, rear approximately 80/80%, rear approximately 70/80% Double doors at the front, middle, and rear Driver's cab with door Ramp, 2nd double door Fully automatic transmission Microwave Manually operated windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater Retarder Radio/CD Stop brake LAWO Mobitec ICU 400 53+101+1+1 emergency seat Emergency exit 12-volt socket Bsdsz H Edispfx Ahmowu Chassis with signs of rust 06.02.2024: Upper control arm on the left front axle replaced, including bearing; CR tie rod new; rear axle, left front shock absorber replaced. 07.02.2024: Line from the oil filter to the engine block new; front axle, right brake chamber replaced. 22.10.2024: Hub cover on the left front axle new. 27.03.2024: 3-fan EGR on the left rear new. 22.10.2024: Idler pulley bearing new; coolant expansion tank new; axle guide on the left and right front axle and right rear axle new; axle modulator on the rear axle new; pressure reducer on the rear C-axle new. 21.01.2025: Rear axle, pads + discs new; rear axle, left axle guide new. 25.03.2025: 3rd door valve new. 21.07.2025: C-axle, left and right shock absorbers new; C-axle, left air tank new; 4-circuit protection valve new. Various signs of wear and tear, commensurate with age. Last inspection: 03.11.2025 at 643,658 km, next inspection due at 703,658 km. Price: 4,500.00 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, total height: 2,250 mm, total width: 2,360 mm, controller manufacturer: FANUC, product length (max.): 3,880 mm, number of axes: 8, This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details. • Chuck size: 8" (204 mm) • Bar capacity: 65 mm • X1/X2 travel: 165 / 100 mm • Z1/Z2 travel: 700 / 700 mm • Y1/Y2 travel: 30 / 40 mm • Spindle motor power: 22 / 18.5 / 15 kW • Turret stations: 24 (12 + 12) • Turret interface: BMT 55 • Guideway type: High-rigidity linear roller guides • Spindle type: Integral motor spindle with wide speed range • Turret capability: Upper and lower turrets with Y-axis and 12 driven stations each Bjdpfx Ahoyrtbqemswu • Structural design: Highly stable Y-axis design for high-volume serial production Additional equipment • Cooling and filtration: High-pressure coolant through turret; Oil skimmer • Sub-spindle features: Coolant supply through sub-spindle; Parts ejector • Parts handling: Parts catcher; Parts conveyor for both spindles • Calibration: Tool setter (auto-electric) • Automation and interfaces: Air conditioning (electrical cabinet); Bar feeder interface; 3-color tower light • Optional: Chip conveyor (hinge belt conveyor). Price on request Additional Information As new, showroom model Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2016, Eumacop ER 600 bandsaw in very good condition, manufactured in 2016. Bwedpfez Hw Uyjx Ahmeu Upper and lower PANHANS bandsaw blade guides Roller diameter: 600 mm Max. cutting height: approx. 380 mm Max. cutting width: approx. 570 mm Motor power: 2.2 kW (brake motor) Band speed: approx. 1,500 m/min Saw band length: approx. 4,700 mm Max. saw blade width: 30 mm Optionally, a suitable dust extraction system from Höcker Polytechnik / Nestro can also be purchased (see last picture). The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: new, diameter 32 - 50mm der Buchsen length 350 mm groove width 10 - 12 - 14 mm weight 20 kg Bsdpfx Asupxk Dshmswu dimensions 400 x 150 x 250 mm Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm

Condition: new, saw blade diameter 315 mm capacity 90 degrees: round 108 mm capacity 90 degrees: square 93 mm 150 x 90 mm Working height 920 mm saw blade turning speeds 17+33 oder 33+66 U/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,328 t dimensions of the machine ca. 0,8x0,9x1,7 m ACTION PRICE!!! High-performance vertical circular saw VKS 315 (Article 20150) • miter left 60° + right 45° • Vice with double clamping arm (fixed 4 times) for low-burr cuts and Bedpfx Asd Iin Sjhmewu lateral quick shift • Saw table with large rotating plate and particularly stable vice for optimal material tension • Robust prism guide of the saw head (dovetail guide adjustable) • Automatic cooling • Machine base with chip drawer • Metal handle for high clamping force ATTENTION: Price is without saw blade!!! (saw blade price EUR 109)

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm • Powerful special gear with elastic clutch for heavy-duty use Bwsdpfx Ahsd Iin Tomsu • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Condition: excellent (used), mileage: 144,307 km, power: 210 kW (285.52 HP), first registration: 07/2013, overall weight: 12,500 kg, fuel type: diesel, axle configuration: 4x4, maximum load weight: 5,740 kg, empty load weight: 6,760 kg, fuel: diesel, driver cabin: day cab, gearing type: semi-automatic, emission class: euro5, suspension: steel, total width: 2,550 mm, number of cylinders: 6, displacement volume: 6,374 cm³, nominal power: 210 kW (285.52 HP), Equipment: ABS, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), power mirror, Key Features Internal Reference: 24198M Chassis Number: WDB 405 123 1V2 338 46 Serial Number: 676.914.353 Vehicle Model: Unimog U400 4x4 Vehicle Make: Unimog Product Category: Slope Mower Condition: Used Mileage: 144307 Emissions Standard: Euro 5 Date of First Registration: 17.07.2013 Last Inspection (MFK or TÜV): 22.03.2023 Fuel Type: Diesel Overall Vehicle Condition: very good Engine Displacement (ccm): 6374 Engine Power: 285 Transmission Type: Semi-automatic Cylinders: 6 Suspension: Steel-Steel Hydraulic System: Tilting hydraulics, additional hydraulics Cab Vehicle Equipment: ABS, CD Player, Differential Lock, Electric Windows, Electric Mirrors, ESP, Radio, Cruise Control, Central Locking Cab Size: Day Cab Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 4x4 Axle 1: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Spring Suspension Axle 2: 315 / 80 R 22.5/10mm, Disc Brakes, Leaf Spring Suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 12500 Gross Train Weight: 32300 Payload: 5740 Unladen Weight: 6760 Vehicle Width: 2550 Bjdpfjz Hwr Sex Ahmswu Superstructure Superstructure Manufacturer: MULAG Superstructure Year: 2013 Superstructure Equipment: Trailer Hydraulics, Cabin Control, Auxiliary Drive Superstructure Notes: Manufacturer: MULAG, Year: 2013, Trailer Hydraulics, Cabin Control, Auxiliary Drive, - Roadside verge mower MRM 300 - Roadside verge mowing head RMK 1200 - High-pressure blower HDG - Front-mounted - Guide post MLM 200 - Slope mowing equipment SB 500/600 - Flail mowing head with grass collection AMK 500/1200/1600 - Operating manuals available