Used Gipo Ag Jaw Crusher Plant for sale (12,406)

Condition: ready for operation (used), * Brand: Humboldt-Wedag Bwsdpfx Afeywm Uie Dsr * Type: PALLA 50 U. * Without: drive.

Condition: new, Year of construction: 2025, Marini Magnum 120 mobile asphalt mixing plant Bwjdjwrflvopfx Af Der year: NEW capacity: up to 120 t./h 1 year guarantee

Condition: new, Year of construction: 2025, machine/vehicle number: 618621425, Marini Magnum 140 mobile asphalt mixing plant Year: NEW Capacity: up to 140 t/h 1 year warranty - Calorific value of the fuel: 9,600 kcal/kg - Material passing through the #8 (2.38mm) sieve: no more than 20% - The equipment was developed to facilitate transportation as much as possible without the need for pilot vehicles. Simply connect the equipment to the asphalt binder storage and fuel system. - Chassis is constructed with a highly resistant I-beam with a forged kingpin, 3 axles with special tires, suspension springs, air brakes, tank, and safety valve, highway signaling system, and a mechanical support leg with telescopic support. - Quadruple feed bin (two-by-two) with a 3.80mm wide opening and a capacity of 6m3, completely designed to withstand the stresses during material unloading. Regulated slide gate for aggregate flow. - Automatic vibrator system for one bin, which facilitates the flow of fine aggregates with high humidity levels in one of the bins. - Feeding belts with 20" wide canvas supported by 4" rollers in a "V" configuration with permanent lubrication. The gearbox is directly connected to the drum shaft. Drums are regulated with oscillating and shielded bearings. 3-hp electric motor. - Conveyor belt in U-beam, 24" wide canvas supported by 4 rollers in a V configuration with shielded rollers actuated by an electric motor. - Sieve with a screen for eliminating oversized materials. - Drum dryer and mixer with heat insulation, four driven support rollers made of high-carbon steel, driven by a gearbox, 15hp electric motor. - Rotational external mixer - Burner with fuel spraying via gear pump, Kcal/h - Dry filtering system consisting of a dust collection system - Control system: Sistex Further options and accessories: Control system, control room, dust filter/dust collector Bwedpfx Afshd I T Sj Djr Further information: Intended use: Construction, Usable material: Asphalt, Overall condition: very good, Technical condition: very good, Visual condition: very good.

Condition: new, functionality: fully functional, Year of construction: 2025, Aggregate and ballast crusher equipment are used in the crushing and processing of various materials for construction and infrastructure projects. These crushers are designed to break down large rocks, gravel, or stones into smaller pieces, producing aggregates and ballast that are essential components in the construction industry. Here are some key aspects related to aggregate and ballast crusher equipment: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing in aggregate and ballast production. They operate by compressing the material between a stationary and a movable jaw. 2. Impact Crusher: - Impact crushers are suitable for shaping and producing fine aggregates. They use impact force to crush the material, making them suitable for various types of rock and ore. 3. Cone Crusher: - Cone crushers are often used for secondary and tertiary crushing in aggregate production. They are efficient for producing well-shaped and finely graded aggregates. 4. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are designed for shaping and producing high-quality artificial sand. They use the "rock-on-rock" crushing principle, where rocks are fed into the rotor to be accelerated and crushed against the stationary anvils. 5. Gyratory Crusher: - Gyratory crushers are primarily used in mining, but they may also be used in the production of aggregates. They have a conical head and a concave surface, which crushes the material between the head and concave. 6. Mobile Crushers: - Mobile crushers, including mobile jaw crushers and mobile impact crushers, provide flexibility and mobility for on-site crushing of aggregates and ballast. They are often used in construction projects where materials need to be processed directly at the job site. 7. Screens and Scalpers: - Screens and scalpers are used to separate different sizes of aggregates after the initial crushing stage. Vibrating screens are commonly employed to classify and separate materials based on size. 8. Conveyors: - Conveyors are crucial for transporting materials between various stages of the crushing process and for stockpiling the final products. They enhance efficiency in material handling. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. These systems may include water sprays or chemical suppressants. Bwodpfeq Nxrxsx Af Dor 10. Quality Control: - Quality control measures, such as particle size analysis and gradation testing, are essential to ensure that the produced aggregates and ballast meet the required specifications and standards. 11. Environmental Considerations: - Crusher equipment should adhere to environmental regulations, and measures like dust control, noise reduction, and proper waste disposal should be implemented. When selecting aggregate and ballast crusher equipment, factors such as the type of material, required product size, production capacity, and mobility requirements should be taken into consideration. Additionally, adherence to safety and environmental standards is crucial in the operation of crushing equipment.

Condition: used, This listing is for Intergra Bioscience AG Vacusafe Vacuum Aspiration System The unit is in full working condition and ready for immediate use This vacuum aspiration system is a high-quality lab instrument manufactured by Intergra Bioscience AG (Model: Vacusafe). This unit safely and efficiently aspirates and collects hazardous or infectious biological liquid waste. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Bwsdpfx Afezqf Rme Der Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2003, operating hours: 20 h, condition: excellent (used), WAREHOUSE CLEARANCE: 13 units of very well-maintained SMAG Mobile Masts AG BIGSTAF FMT 26/6 mobile masts, 25 m, mounted on trailers, manufactured in 2003, ORIGINAL PRICE €350,000, we offer a 97% DISCOUNT. Manufacturer: SMAG Mobile Masts AG Model: BIGSTAF FMT 26/6 Year of Manufacture: 2003 Condition: very good Extension height: 25.0 m Aluminum telescopic mast FTM SALZGITTERWERKE, 25 to 42 m light and rugged mobile mast - Simplest and fastest installation - Manually or electrically erectable - Infinitely adjustable extension - Can be set up on terrain with up to +/-10% slope - 2000 N (2 m2) wind load without bracing (up to 10,000 N possible with bracing) - At least 170 kg top load Bedpfx Ajzrlf Tof Dowr - Highest precision, also for microwave applications - On trailer with 70 mm eye or, optionally, with 40 mm civil ROCKINGER eye - Dimensions of the segments approx. 5 m, height of trailer 265 cm, width 2.40 m - Can be set up on terrain with up to +/-10% slope - Winch operation can be manual with a crank or electric with 2 units of 12 V batteries, min. 35 Ah, connection cable approx. 15 m, included in the scope of delivery - Requires 24V 60A supplied by 2 car batteries (not included) - As a mobile structure, no building permit is required (depending on the federal state) - Original price approx. €230,000, years of manufacture between 1985 and 1990 - The offer is valid only for commercial buyers - Price tested, functioning and in good condition with a maximum of 20 hours of use.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, For sale is a Karl Barth AG "Ventomat" high-performance radial fan, type SE-1-100-4p, single-sided suction, sheet metal housing, painted, motor 5.5kW, 4-pole. Karl Barth AG (Dättlikon ZH) has been manufacturing these fans for over 50 years, and they are a well-known and highly regarded brand in Swiss agriculture, specifically for hay and biomass drying. The fan was used by us for approximately 4 months for ventilation/drying (hay and a drying container) and is in perfect working order. It was newly purchased in December 2025. Included in the scope of supply: - 1x Ventomat SE-1-100-4p fan, 4kW rated power, motor 5.5kW/4-pole, sheet metal painted, single-sided suction - 1x Invertek Optidrive E3 frequency inverter, 5.5kW, IP66/NEMA4X, factory configured, including maintenance switch and mounting base plate - 1x duct cone 222/563 to D400mm - 1x duct reducer D750/D600mm including flange ring D750mm - Additionally included free of charge: 1x flexible fabric hose Ø400mm, 10m length Technical data: Parameter Value Manufacturer Karl Barth AG, Dättlikon (Switzerland) Type Ventomat SE-1-100-4p Rated power 4 kW Motor 5.5 kW, 4-pole Design sheet metal painted, single-sided suction Frequency inverter Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X FU input 380-480V, 3-phase, 50/60Hz, 17.2A Bjdpezrzizofx Af Dswr FU output 0-480V, 3-phase, 14.0A, 7.5HP Duct connection 222/563mm to D400mm (cone), additionally D750/D600mm reducer Condition: Barely used (approximately 4 months in operation), technically flawless, fully functional. The new price (December 2025) was CHF 7870.00. Location: 6064 Kerns (self-collection).

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Bwsdpfxszqhdio Af Dsr Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Condition: new, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Bwedpsflz Inefx Af Djr Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, functionality: fully functional, power: 18 kW (24.47 HP), lifting power: 3,500 kg/m, lifting height: 23,000 mm, first registration: 06/2026, mast type: other, Year of construction: 1994, machine/vehicle number: 34050, Commercial sale of a fully functional Condecta Eurokran 3410 quick-assembly crane! For sale is a robust and reliable under-slewing tower crane from the quality brand Condecta. The crane comes from the active inventory of Fischer Bau GmbH and is ideal for medium-sized construction and carpentry projects. The unit is characterized by short setup times and high flexibility. Inspection book and manuals are available. Technical data & performance data (according to the manufacturer's plate): Manufacturer: Condecta AG (Factory for construction machinery and equipment, Switzerland) Model / Type: Eurokran 3410 Year of manufacture: 1994 Factory number: 34050 Hook height: 18 – 23 meters Slewing radius: 3.05 meters Max. travel speed: 30 km/h Boom, reach & load capacity table: The crane can be operated flexibly with different boom lengths: With 34 m boom: 34.00 m reach = 1,000 kg | max. 3,500 kg at 12.50 m With 32 m boom: 32.00 m reach = 1,100 kg | max. 3,500 kg at 12.50 m With 30 m boom: 30.00 m reach = 1,250 kg | max. 3,500 kg at 13.00 m With 28 m boom: 28.00 m reach = 1,500 kg | max. 3,500 kg at 14.00 m With 25 m boom: 25.00 m reach = 1,800 kg | max. 3,500 kg at 14.50 m Weights & ballasting: Counterweight / central ballast: 22 t to 24.42 t Ballast ballast: Including the original concrete ballast blocks (12 pieces, each weighing 2,000 kg = 24,000 kg total weight). Scope of delivery: Condecta Eurokran 3410 in assembled/ready-to-use condition (as shown in the picture) Complete set of original concrete ballast (12 plates) Control unit & detailed lubrication/maintenance schedule Condition: The crane is in used condition, consistent with its age and application, but is well-maintained and fully functional. The galvanization of the mast and boom elements is well preserved. The original nameplates and load charts are clearly legible. Legal notes & terms of sale Commercial sale by Fischer Bau GmbH. The stated price is a gross price (including 20% VAT). You will receive a proper invoice with VAT shown. Warranty note: Bwodpfx Afszbu D Ej Der For companies / entrepreneurs (B2B): The sale is made with complete exclusion of any warranty, guarantee and liability for defects. Condition & inspection: Sold as seen and tested. An inspection and a functional test can be arranged in Weissenbach 153, 8967 Haus im Ennstal after prior agreement.

Condition: used, Year of construction: 2013, operating hours: 3,500 h, machine/vehicle number: 13620, rotor diameter: 395 mm, rotor width: 1,300 mm, input voltage: 400 V, number of blades: 60, rotational speed (max.): 129 rpm, power: 55 kW (74.78 HP), The Vecoplan All-Shredder – VAZ – can be used for a variety of materials – waste shredding, plastic shredding, wood shredding, etc. The machine, with a power of 55 kW, is equipped with 60 cutting knives, each measuring 60x60 mm. A turbo clutch facilitates the start-up process, allowing the machine to be started even with a full hopper. The hopper is made of stainless steel, and the extraction hood is made of galvanized sheet metal. The machine is offered complete with the control panel. The hopper and extraction hood are included. If required, the infeed conveyor – pit conveyor with a width of 1000 mm – can also be purchased for an additional EUR 9,500. If required, the discharge conveyor, 650 mm wide, with a bend and magnetic head pulley – discharge height of 3800 mm – can also be purchased for an additional EUR 11,000. Spare parts are included in the price of the shredder. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility in Europe. Bsdpfx Aezmzdusf Dswr The details for optimal transport need to be arranged. The machine price is without packaging on a pallet.

Condition: good (used), Year of construction: 1996, functionality: fully functional, power: 550 kW (747.79 HP), overall weight: 6,000 kg, nominal heat output: 550 kW (747.79 HP), heating capacity: 550 kW (747.79 HP), For sale is a complete wood chip combustion system with two Schmid wood chip boilers. Boiler 1, type UTSK-550.22, has a capacity of 550 kW, and Boiler 2, type UTSK-300.22, has a capacity of 300 kW. The system was manufactured in 1996, has been regularly maintained, and is in good, operational condition. The system will be sold including electrical switchgear and accessories, and optionally with 3 buffer tanks, each with a capacity of 8,000 liters. The system does not have an electrostatic precipitator and is being sold because it does not meet Swiss emission standards. It must be dismantled and transported by the buyer; warranty claims are excluded. Bodezn Rfwspfx Af Dewr

Year of construction: 1974, condition: excellent (used), Cryogenic tank rail cars, gas, wagons, tank wagons, gauge, CO2, carbon dioxide, storage CO2 gas wagons, tank wagons, carbon dioxide, transportation, cryogenic tank rail cars, storage They are constructed to storage liquid CO2. manufacturer: Rheinstahl AG year of manufacture: 1974 volume: 51,79 m3 pressure: 20 bar test pressure: 30 bar Export from EU Bwedpfjhfv Ehex Af Der carbon dioxide, transportation, LCO2, gas. Please contact us for more details.

Condition: used, Year of construction: 2018, operating hours: 6,912 h, 2018 | GIPO GIPOREC R 100 FDR GIGA Impact | Used Crusher | 6912 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 249000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 52 approved ✅ 9 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The crusher remains in active operation, so the hour meter will increase accordingly. It has been well-maintained, and all wear parts have been recently replaced to ensure it is in good working order. While the machine shows significant cosmetic wear and looks quite used, its mechanical condition is solid. 📄 Want to see the full inspection, extra photos, or a video? Bsdpfsy Dhrpex Af Djwr Tip: The reference "40734 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), functionality: fully functional, empty load weight: 38,500 kg, operation weight: 38,500 kg, Year of construction: 2022, operating hours: 32 h, Equipment: steel tracks, GIPO S156/3 McCloskey S190 3D screenr UNUSED! Bwjdszpx Ezepfx Af Dor 3D - 4 products Only 32 hours 222 year Top deck area 6100x1550 mm Middle deck area 6100x1550 mm Bottom deck area 5500x1550 mm Tipping grid 4-way Engine Deutz CAT C4.4 Weight 38,5 tons Machine like NEW We can arrange shipping to any place in the world

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 31.212.003.252, total height: 1,800 mm, total width: 2,000 mm, total length: 2,800 mm, overall weight: 2,750 kg, stroke length: 500 mm, workpiece diameter (max.): 250 mm, power: 3 kW (4.08 HP), For sale is a high-quality Fässler AG D250C gear honing machine, designed for the precise finishing of gears. For decades, Fässler has been recognized as one of the leading specialists in honing technology and is known worldwide for its highest precision and process reliability in gear manufacturing. Bwjdpfx Aozd T Tisf Djr The D250C is ideally suited for the machining of spur gears and transmission components in the automotive, mechanical engineering, and drive technology sectors. Thanks to its robust construction, precise CNC control, and proven Fässler technology, it enables excellent surface qualities, reduced noise levels in the gears, and the highest dimensional and geometric accuracy.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping A control cabinet is not available and must be built by the buyer. Bwodezl E Stspfx Af Djr The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: excellent (used), Year of construction: 2013, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: R1203433 Pos 1000, overall weight: 365 kg, rotor diameter: 400 mm, rotor width: 320 mm, opening width: 340 mm, input voltage: 400 V, power: 22 kW (29.91 HP), A very robust hammer mill from Alpine with grate bars for crushing soft to medium-hard materials. The mill is supplied with an inlet hopper and a device for pneumatic extraction. A control panel is not included. Bodpfx Aszl E N Eof Djwr Machine data: 365 kg; 2800 RPM, 22 kW Rotor 400x320 mm, cast iron rotor, inlet 340x150 mm, Design with grate bars 4 rows of hammers, 5 hammers per row The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Bodpfx Afsxxxqvo Dowr Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: like new (used), We are selling the following pressure regulator: Bwjdpfx Aox Ekrusf Dor Article number: RS3602021018 5 units available, in new condition. Price for complete purchase: €40 net. Operating manual included. Shipping possible. No returns or warranty.

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, Enamelled steel filter nutsche Estrella AG, Switzerland Capacity: 760 litres, filter nutsche, suction nutsche, pressure filter Year of manufacture: 1994 Documentation: complete Bwjdpfxou U Afue Af Der Operational condition: fully functional Diameter: 1000 mm Filter area: 0.75 m² Permitted operating pressure: -1/+2 bar Permitted operating temperature: -10/+200 °C Support structure: upright on legs with subframe Opening: hydraulic opening assistance Enamel quality: blue colour, Email 2000 Estrella Total volume: 760 litres Overall height open: 2440 mm Height closed: 1590 mm L x W: 2000 x 1300 mm

Year of construction: 1989, condition: used, functionality: fully functional, Grain Hopper Railway Wagons for Sale – Models 11-739 and 19-752 Container Flat Wagons for Sale – Models 13-470 and 13-9004 Railway Tank Wagons for Sale – Model 15-1443 SHORT DESCRIPTION Grain Hopper Railway Wagons - A selection of four-axle covered grain hopper railway wagons manufactured between 1976 and 1989. Available models include 11-739 and 19-752, with a tare weight starting from 21.3 tonnes. Wagons are available with either a valid remaining period until the next scheduled repair or an expired scheduled repair interval. Container Flat Wagons - A selection of four-axle container flat wagons, also known as fitting platforms, manufactured between 1980 and 1991. Wagons are available with either a valid remaining period until the next scheduled repair or an expired scheduled repair interval. Buyers can select units according to their preferred model, year and repair status. Railway Tank Wagons for Sale – A selection of used railway tank wagons, model 15-1443, manufactured in 1977 and 1978. Declared tare weight is approximately 22.5 tonnes. Wagons are available with either a valid remaining scheduled repair interval or an expired repair interval. Buyers can select units according to the required year, condition and repair status. Bwedpfezmtufox Af Djr FULL DESCRIPTION Main information: • Models: 11-739 and 19-752 • Years of manufacture: 1976 to 1989 • Tare weight: from 21.3 tonnes • Multiple wagons available • Individual selection according to repair status Models: 13-470 and 13-9004 • Years of manufacture: 1980 to 1991 • Declared tare weight: approximately 21.3 to 22.0 tonnes, depending on the individual wagon • Multiple wagons available • Individual selection according to model and repair status Model: 15-1443 • Years of manufacture: 1977 and 1978 • Declared tare weight: approximately 22.5 tonnes • Multiple wagons available • Individual selection according to technical condition and repair status The available fleet includes: • Wagons with a valid remaining period until the next scheduled repair • Wagons whose scheduled repair interval has expired and which require scheduled workshop repair before further operation Buyers can select wagons according to their preferred model, year of manufacture, technical condition and repair status. The exact model, manufacturing year, repair history and technical condition vary between individual wagons. Detailed wagon lists, identification numbers, photographs, available documentation and commercial terms can be provided on request. Price on request.

Condition: repair required (used), functionality: unexamined, Year of construction: 1990, overall weight: 92,000 kg, load capacity: 20,000 kg, working height: 8,500 mm, Equipment: documentation/manual, Two rail-mounted electric container gantry cranes are offered for sale from an industrial site in Riga, Latvia. The cranes were designed for loading, unloading, transferring and stacking ISO 1C and 1CC containers. Their 20,000 kg rated lifting capacity, 25 m span and powered travelling trolley make them suitable for container terminals, railway yards, ports, logistics hubs and industrial storage areas. The cranes were manufactured in 1990 by KRAN / Uzlovsky Machine-Building Plant in the Tula region. The factory type designation is 20-25-8.5-5. Two units are available. EQUIPMENT AND DOCUMENTATION Rail-mounted gantry structure with electrically driven crane travel mechanism. Powered travelling trolley and main hoisting mechanism. Bedpfozmtciex Af Djwr Operator cabin control. The factory passport specifies a rotating 20 t container spreader for ISO 1C and 1CC containers; A technical passport for factory no. 029 is available in Latvian and Russian, including historical inspection and repair entries. Further technical information and detailed photographs can be provided on request.

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm Bwsdpfx Aszrlw Nsf Dsr -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 1997, SGT Strahlmaschinen SS-85 sand blasting machine Year: 1997 Bedsznl Dnjpfx Af Dowr With part rotation system. With dust extractor system. Under power in our warerhouse.