Used Herbold Sms 60/100 for sale (40,675)

Condition: excellent (used), functionality: fully functional, For sale: this lathe, currently connected and available for testing. Accessories for the machine included. A video of the machine can be sent via WhatsApp upon request. Ncjdpov Nw A Njfx Ac Tou Swing over bed: 1050 mm Distance between centers: 6000 mm Swing over carriage: 840 mm

Condition: used, Year of construction: 1992, pressure 100 t table length 1800 mm table width 1550 mm table travel 2000 mm dayligth 1800 mm Nsdpfoyt R H Tsx Ac Tecu total power requirement 19,5 KVA weight of the machine ca. 22 t

Condition: refurbished (used), functionality: fully functional, load capacity: 60 kg, controller manufacturer: Kuka, controller model: KRC2 / 4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Nodpferqgdusx Ac Tscu Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: used, Punching tool with Linar-integrated punching brackets, ABS-SCHWABE Type 100/160 11 punching brackets, punching unit for a press brake Year of manufacture: approx. 1990 Ncjdpfsdz Sp Hjx Ac Tju Outreach: 160 mm Punching capacity: 0.3 to 5 mm material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with the punching tool) A round hole tool, ø 5 mm, is installed. Punching bracket spacing: 195 mm - The tool unit was mounted on a hydraulic press brake. Dimensions of the punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of the punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensions L x W x H: 2500 x 345 x 300 Weight: 400 kg Good condition

Condition: used, This listing is for a Sartorius Cubis MSE2202S-100-D0 Balance with printer. The unit is in full working condition and is ready for immediate release. The Sartorius MSE2202S-100-D0 is a top-of-the-line balance from Sartorius’ Cubis series, offering precision, advanced functionality, and robust design, making it ideal for various laboratory settings. With a significant capacity and a range of built-in applications, this balance is suited for demanding weighing tasks. Key Features: High Capacity and Readability: Capacity: 2,200g Readability: 10mg (0.01g) This allows for precise measurements of both small and larger samples, making it versatile for different applications. Generous Weighing Pan: Dimensions: 206 x 206mm (W x D) Ample space for weighing liquids, powders, pastes, or solid samples without risk of spillage. User-Friendly Control Panel: Features a keypad and LCD display with text prompts for easy navigation and activation of functions, enhancing user experience. Built-in Applications: Comes with nine built-in applications for various tasks, including: Unit conversion isoCAL (automatic calibration) Density determination via the buoyancy method Net/total formulation Weighing in percent Counting Connectivity Options: Equipped with a USB port for data transfer to PCs (compatible with Windows 7, Vista, XP, 2000, ME, or 98SE) and an RS-232C port for connecting peripheral devices, allowing for easy integration into lab setups. Accuracy Features: isoCAL: Automatic internal calibration ensures precision based on temperature and time, reducing user intervention. Automatic Levelling: Achieved at the touch of a button, simplifying setup. Nsdpfsxxzhdex Ac Tocu Security Features: Includes a fastening point for attaching an anti-theft locking device, enhancing security in shared or public environments. Robust Design: Ingress Protection Rating: IP54, which protects against dust and water splashed from all directions, making it suitable for various lab environments. Operating Temperature Range: 5 to 40°C at 80% RH, ensuring reliable performance under different conditions. Technical Specifications: Capacity: 2,200g Readability: 10mg Linearity/Repeatability: 20mg/7mg Minimum Sample Weight (USP Standards): 10g Weighing Units: gram, kilogram, carat, pound, ounce, troy ounce, grain, pennyweight, milligram, parts per pound, Austrian carat, Newton, pound:ounce, microgram Display: LCD Power Supply: 100-240V, 50-60Hz (includes 120V line cord) Weighing Pan Material: Stainless steel Compliance: ISO, FDA, USP, GxP; IP54

Year of construction: 2007, condition: ready for operation (used), A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible. Ncsdoyiflgjpfx Ac Tju

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, For sale is an injection moulding machine from the brand Arburg, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. The machine is offered without peripherals. The rotary table, material feed, temperature control units, and other accessories are not included. Technical data: Year of manufacture: 2001 Clamping force: Clearance between tie bars: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Ejector stroke: 175 mm Screw diameter: 25 mm Theoretical shot volume: 54 cm³ Shot weight: 45 g/PS Ncodpfsx E U Elsx Ac Tou Transport and loading can be organised on request, at an additional cost, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 184686, clamping force: 1,000 kN, screw diameter: 25 mm, clearance between the columns: 420 mm, displacement volume: 54 cm³, injection weight: 45 g, opening stroke: 500 mm, For sale is an Arburg injection moulding machine, model 420 C 1000-150/60. The machine is in excellent technical condition and has been very well maintained. Technical data: Year of manufacture: 2001 Clamping force: 1000 kN Tie bar spacing: 420 x 420 mm Opening stroke: 500 mm Mould installation height: 250 mm Mould mounting plate: 570 x 570 mm Nsdpfx Aox Itamoc Tocu Ejector stroke: 175 mm Screw diameter: 25 mm Calculated shot volume: 54 cm³ Shot weight: 45 g/PS The machine is offered without periphery. Rotary table, material conveying systems, temperature control units and other accessories are not included.

Year of construction: 2012, condition: ready for operation (used), Installation height min./max.: 200mm/595mm, opening stroke: 200mm, closing force: 600kN, screw diameter: 25mm, distance between tie bars: 370mm, max. injection volume: 49cm³, operating hours: 55682h. Documentation available. On-site inspection is possible. Ncsdpfet E Tq Rjx Ac Tju

Year of construction: 2003, condition: good (used), For sale is a 2 component injection molding machine brand Arburg and type 420 C The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Ncedpfxjlwxpij Ac Tju Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Ncedsvzmdaepfx Ac Teu -Saw blade: Ø 860 x 5 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 22 kg

Condition: good (used), Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate, straightening bench ... -Number: 1 prism available Ncedpfxedyk A Tj Ac Tou -Dimensions: 100/120/H60 mm -Weight: 5 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos Nsdpfxeu Uwwxo Ac Tscu -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 40 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 167/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 600 mm -Number: 1x cylinders available -Price: per piece Ncjdpfx Acjd Stiwj Tju -Dimensions: 115/115/885 mm -Weight: 12.45 kg

Condition: good (used), geared motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Design: B5 -Shaft diameter: Ø 40 mm -Protection class: IP 54/55 -Number: 1x motor available Njdpfecmkbbox Ac Tscu Price: per piece -Dimensions: 550/250/H280 mm -Weight: 40 kg

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Manufacturer: Control Techniques, Brushless AC Servo Drive -Type: MAXAX 100/6000 Nsdspb Eatjpfx Ac Tocu -Input: 1.5 kVA -Output: 1 kW -Dimension: 315/230/H60 mm -Weight: 2.9 kg

Condition: used, Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 100A -Quantity: 2x power controllers available Ncjdpfxopcmtwo Ac Teu -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg/pc.

Condition: good (used), rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm Ncedspxq Uvepfx Ac Tsu -Module: 6 (see photo) -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 4 pieces -Type: Ø 100/110/140/160 mm various versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm Ncodpfju Uwv Ijx Ac Tou -Weight: 31.7 kg

Condition: used, Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg Ncjdpfsc Nq Udox Ac Tsu

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 1600/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 587 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 115/115/880 mm Njdjd Stixjpfx Ac Tecu -Weight: 13.6 kg

Year of construction: 2000, condition: excellent (used), Neuman und Esser ICM 48/60 Classifier Mill, only the grinder without accessories, good condition. Additional we have a ICM 8 and a big ICM 1000 for sale Ncsdpfxoh Ugwye Ac Tju

Condition: used, mileage: 74,260 km, power: 85 kW (115.57 HP), first registration: 07/1999, overall weight: 4,300 kg, color: orange, gearing type: mechanical, loading space length: 2,450 mm, loading space width: 1,540 mm, loading space height: 300 mm, * 5-speed manual transmission * Differential lock * Hydraulic connections: front 7 / rear 6 * 2x trailer hitches * Front mounting plate for snowplow * PTO (power take-off) * 3-way tipper: 2.45 x 1.54 x 0.30 m Ncedpfx Aoxc R Inec Tju As viewed or offered, without any additional services or accessories. Our offer is generally without a new TÜV inspection. Should a new TÜV inspection be required, we are happy to provide a quote from our partner workshops. The vehicle may have advertising stickers and/or lettering. Our general delivery and payment conditions apply. We assist with export, preparation of export documents, procurement of license plates, supplier's declaration, etc.! The information provided in advertisements, online, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability or warranty for typographical or data transmission errors. Listed equipment should be checked separately if necessary. We expressly reserve the right to prior sale, as this item is also advertised on other platforms. No guarantee is provided for accessories information. Subject to change, prior sale, or errors. We strongly recommend and offer viewing and inspection, so that the buyer has a correct understanding of the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: used, Name: Filter Press Manufacturer: MSE Type: KFP1000-90/60-25 Year built: 2011 Construction form: Side beam press Filter pressure:: 15 bar Press content: Approx. 1177 liters (expandable to 1766 liters) Cycle: Open Filter area: Approx. 101 m2 (expandable to 152 m2) Plate size: 1000 x 1000 mm Number Plates: 60 (expandable to 90) Plate material: Polypropylene Plate Transport: Automatically Filter cloth washer: No Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Nodpfx Acsrmmp Is Tjcu Empty weight: approx. 1400 kg Technical doc.: Yes Accessories: Drip trays, 25 replacement plates, control cabinet, hydraulic system, light curtain Condition: Second hand Price: On demand

Condition: as good as new (ex-display), functionality: fully functional, stack height: 150 mm, workpiece length (max.): 364 mm, workpiece width (max.): 670 mm, No minimum price – guaranteed sale to the highest bidder! Showroom machine with extended configuration! TECHNICAL DETAILS Format and Paper Sheet size: 210 x 210 mm up to 364 x 670 mm Nedpsw Ifbhsfx Ac Tecu Paper weight (standard): 81.4 to 350 g/m² Paper weight (coated): 105 to 350 g/m² Feeder stack height: 150 mm Performance and Capacity Production speed: up to 55 sheets/min Number of creasing lines: up to 20 EQUIPMENT Smart Conveyor SMSL-CV Rotary creasing unit SMSL-CR8