Used Hess Economic for sale (1,227)

Condition: used, Cantilever rack H2500xW1300xD500mm, basic rack, double-sided, load capacity 2600 kg · for light loads · for economical and organized storage of long materials such as rods, sheets, tubes, beams, etc. · stable, hot-rolled IPE 120 profiles Itedpfez T N E Ssx Ag Asn · cantilever arms

Condition: used, Cantilever racking H2500xW1000xD500mm, add-on racking, load capacity 1300 kg Itjdpfoz Uxbrsx Ag Asn · For light loads · For economical and organized storage of long goods such as rods, sheets, tubes, beams, etc. · Sturdy, hot-rolled IPE 120 profiles · Cantilever arms with 1...

Condition: used, Cantilever racking H2500xW1000xD600mm, add-on racking, load capacity 1120 kg · For light loads Iedpjz Ut E Ejfx Ag Ajtn · For economical and organized storage of long goods such as bars, sheets, tubes, beams, etc. · Sturdy, hot-rolled IPE 120 profiles · Cantilever arms spaced at 1

Condition: used, This listing is for a Agilent Cary 100 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. Itjdoxxz Scjpfx Ag Asn The Unit is supplied with a Agilent PCB 1500 Water Peltier System. The Agilent Cary 100 UV-Vis Spectrophotometer is a highly versatile and cost-effective instrument designed for a broad range of laboratory applications, making it an excellent choice for routine research in various fields such as chemistry, biochemistry, and materials science. Key Features: Double Beam Design: This design enhances accuracy and precision by allowing simultaneous measurement of the sample and reference, mitigating the impact of fluctuations in the light source. Wavelength Range: The instrument operates over a wide wavelength range of 190 to 900 nm, making it suitable for diverse applications, including those that require measurements in the UV and visible spectrum. Variable Spectral Bandwidth: The spectral bandwidth can be adjusted as low as 0.2 nm with variable slits, enabling users to optimize data resolution for specific experiments and applications. High Scanning Speed: With a scanning speed of up to 3000 nm/min, the Cary 100 provides quick data acquisition, enhancing efficiency during experimentation. Superior Photometric Stability: The optical design ensures robust photometric stability, resulting in consistent measurements over time, which is crucial for reproducibility in scientific research. Signal-to-Noise Optimizations: The special signal-to-noise reading mode allows for customizable control over measurement precision, enabling reduced scanning times in high-energy regions and improved averaging in lower throughput conditions. Flexible Operating Modes: Users have the flexibility to operate the spectrophotometer in single, double, or dual single beam modes, adapting the functionality to different experimental needs. Modular Software Control: The Cary WinUV software, which is Windows-based and modular in design, allows users to customize their experience with capabilities like advanced data processing, automatic peak labelling, and enhanced reporting and file transfer options. Accessories and Sample Holders: The instrument can be fitted with a wide range of accessories to extend its capabilities, and it comes shipped with liquid sample holders for immediate use. Benefits: Robust and User-Friendly: The quartz-coated optics not only ensure durability and easy cleaning but also protect against corrosive environments, thereby extending the lifespan of the instrument. Cost-Effective: Designed for routine laboratory work, the Cary 100 provides reliable performance without incurring high costs, making it an economical choice for laboratories. Tailored Experience: The software's modularity allows users to customize their operations and processing tools to fit specific requirements, enhancing productivity and workflow. Versatile Applications: With applications spanning materials testing, petrochemicals, and biotech/pharma studies, this spectrophotometer is a valuable addition to any research setting. The PCB 1500 Water Peltier System is an efficient and precise circulating water bath designed for temperature-sensitive applications in laboratories. Utilizing Peltier technology, this system is ideal for maintaining controlled temperatures for various experiments, particularly in conjunction with thermostatted cell holders. Key Features: Precision Temperature Control: Offers a temperature control pr...

Condition: used, mileage: 98,428 km, power: 62 kW (84.30 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, immobilizer system, onboard computer, soot filter, traction control, Engine damage. Itedpfsziqmksx Ag Aon The Volkswagen T5 Transporter 2.0 TDI is a robust van with remarkable functionality and practicality. Powered by a 2.0 TDI diesel engine, it delivers an output of 62 kW (84 hp), enabling economical driving with a combined fuel consumption of 7.2 l/100 km. It complies with the Euro 5 emission standard and has a CO2 emission of 190 g/km, earning it the green environmental badge. The vehicle offers a variety of practical features, including rear parking assistance (PARKTRONIK) and two sliding doors, which facilitate access to the cargo or passenger compartment from both sides. For added comfort, the driver and front passenger are protected by airbags, while the lumbar support provides support for the driver's seat. The van has an overall length of 4,892 mm, a wheelbase of 3,000 mm, and a permissible gross weight of 2,800 kg, making it a versatile means of transport. This model was first registered in December 2011 and has a mileage of 98,428 km. It is a used van that is well-suited for commercial use, thanks to its truck registration and various loading options. The price starts at 3,100 euros and varies depending on the mileage, year of manufacture, and technical condition. An inspection is possible from Monday to Saturday, and delivery within Germany can be arranged if desired. Special equipment: - Electrical package 1 - Driver assistance system: rear parking assistance, vehicle without seat in the driver's cabin, right - Rear door with glazing, heated rear window with windshield wiper system - High cargo compartment partition with fixed window - Multi-function display / on-board computer, instrument cluster 2, display instruments - Smoker's package - Sliding door cargo/passenger compartment left - Mud flaps front and rear - Seats in the driver's cabin: lumbar support for driver's seat - Interior paneling in the cargo/passenger compartment: hard fiber, halfway up Additional equipment: - Airbag driver/front passenger side - Exterior mirror, aspherical, left - Exterior mirror, convex, right - Floor covering in the driver's cabin: rubber - Driver assistance system: brake assist (HBA) - Vehicle without windows in the cargo/passenger compartment - Vehicle without child safety lock in the cargo/passenger compartment - Interior filter: pollen filter - Body/structure: van - Body variant: normal roof - Headlight range adjustment - Truck registration - Engine 2.0 L - 62 kW TDI - Wheelbase 3000 mm - Low emission according to emission standard Euro 5 - Headlights H4 - Sliding door cargo/passenger compartment right - Seat cover / upholstery: fabric - Seats in the driver's cabin: driver's seat adjustable - Seats in the cargo/passenger compartment: 1st row of seats omitted - Heat-insulating glazing - Permissible gross weight 2.80 t The equipment was determined with the help of a VIN query; errors may occur due to technical reasons. Equipment: - Truck registration - 2x sliding doors (LEFT + RIGHT) - Wooden panel at the rear Sale only to commercial businesses (agriculture, freelancers, small and medium-sized enterprises) or for export. Subject to change and errors.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,520 kg, empty load weight: 1,520 kg, operation weight: 1,520 kg, maximum load weight: 600 kg, lifting power: 600 kg/m, tire size: 26x12.00-12, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 07/2026, emission class: euro5, shovel volume: 0.3 m³, digging bucket width: 1,140 mm, Equipment: additional headlights, all wheel drive, Articulated loader GG06N – the new version of the GG06 series Modern design and even more functionality The GG06N articulated loader is the new generation of the popular GG06 series, designed for users who expect reliability, compact dimensions, and high work performance. The updated design goes hand in hand with an optimized construction, which proves to be excellent in construction work, in agriculture, and in municipal services. Powerful engine and proven technology The GG06N model is equipped with a 3-cylinder engine from the renowned Perkins brand with an output of 25 hp. This power unit offers an optimal combination of power and fuel efficiency, ensuring economical and sustainable operation. This is a solution designed for work under demanding conditions. Hydraulics and work performance Iodpfx Aezifi Hsg Aetn The efficient operation of the attachments is provided by an Italian PWG hydraulic pump with a capacity of 36 l/min and a working pressure of 16 MPa. The loader offers a loading capacity of 600 kg and a bucket volume of 0.3 m³, making it ideal for daily loading and transfer operations. The maximum lifting height is 2.6 meters, which enables comfortable work at different heights. Compact dimensions and mobility Thanks to its dimensions of 3325 mm in length, 1155 mm in width, and 2360 mm in height, the GG06N remains extremely maneuverable and easy to operate. The low unladen weight of 1520 kg and the tire size 26×12.00-12 ensure stability and good grip, even on difficult terrain. Speed and versatility A maximum speed of 18 km/h enables quick movement around the work area, which significantly increases efficiency. The GG06N articulated loader is a versatile machine that combines compactness with great capabilities – ideal for professionals who value performance and reliability. Technical data Bucket volume 0.3 cbm Loading capacity 600 kg Machine weight 1520 kg Engine PERKINS Engine model PERKINS403J-11 Number of cylinders 3 Engine power 25 HP Hydraulic pump PWG Italy 36L per minute Hydraulic pressure 16 MPa Tire size 26x12.00-12 Lifting height 2.6 m Speed 18 km/h Length 3398 mm Width 1140 mm Height 2370 mm

Condition: good (used), Trumpf TruMicro 6 kW Laser Source High-performance disc laser with nanosecond pulses. The high-performance nanosecond lasers of the TruMicro Series 7000 are based on disc laser technology and combine short pulses and high pulse energies, even at high frequencies. This enables you to remove layers and contaminants at maximum speed, reducing your cycle times. Optimize your processes further by varying the repetition rate while maintaining a constant pulse duration. For efficient and economical cleaning of tire molds, the short-pulse lasers of the TruMicro Series 7000 are the ideal tool. Large-area applications with high average power: Removing material, cleaning, tempering: The lasers of the TruMicro Series 7000 demonstrate their full performance in large-area applications. With pulse energies of up to 100 mJ, they achieve enormous material removal rates. A scanner ensures excellent utilization of the power. Flexible laser light cables transport the light where it needs to be, facilitating the integration of the laser. Itedpfx Asxaktleg Asn Manufacturer: Trumpf Type: TruMicro 7050 Laser Source Power: 6 kW Cooling: Water System input power: 380–460 VAC, 3 phases Laser power: 750 W Wavelength: 1030 nm Pulse energy: 80 mJ Pulse duration: 30 ns Beam quality: 20 mm Repetition rate: 5 to 100 kHz Fiber diameter: 400 µm IP rating: 54 Dimensions (W x H x D): 1460 mm x 1350 mm x 730 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 645 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 3,400 mm, total length: 4,430 mm, total width: 2,910 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, The LAGUN L 5AX 500 5-axis simultaneous machining center with a cross table design stands for highest precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for demanding and complex machining tasks. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical equipment: Control system: • HEIDENHAIN TNC 7 digital control system • HEIDENHAIN 19" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal articulated belt chip conveyor Iodpfxsfdxhaj Ag Aotn ✔ Complete enclosure with side-opening viewing windows ✔ Ergonomic control panel Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and create an individual offer for you.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, The LAGUN BM 2 RT is a highly stable, table-type milling center with a rotary table that impresses with its high flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Your advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24 months warranty Technical features: Control system: • HEIDENHAIN TNC 7 digital control system • HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems Itjdpfx Aoff Hz Hjg Aen • HEIDENHAIN electronic handwheel HR 510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip removal: 2 x hinged belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, overall weight: 27,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, The LAGUN BM 3 C is a highly stable bed-type milling center with an integrated rotary table, offering exceptional flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Your benefits: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel ✔ Flexible financing options: leasing or hire purchase Iodpfx Ajm Tv Iieg Astn ✔ 24-month warranty Technical features: Control system: • HEIDENHAIN TNC 7 digital path control • HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Integrated rotary table: Ø 1,100 mm Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip disposal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, power: 17 kW (23.11 HP), travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 6,500 kg, table length: 1,000 mm, table width: 460 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 36,000 m/min, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, spindle nose: SK 40 BIG PLUS (BVD 40), spindle speed (max.): 12,000 rpm, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 850 Machining Center – available for immediate delivery The LAGUN L 850 machining center stands for high precision, robust construction, and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical features: Control system: • HEIDENHAIN TNC 7 basic digital control • HEIDENHAIN 16" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Chip removal system: Hinged belt chip conveyor Itedpfx Agovn Eq Ee Aen Rotary table: Preparation for a 4th axis Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare a customized offer.

Year of construction: 2017, condition: excellent (used), Heraeus Noblelight F300SQ UV Curing System Systems in the F series are robust systems with simple operation for use in harsh production and laboratory environments, and have proven their worth in practice over decades. The F300S emitter system consists of an electrode-less 120 W/cm emitter system and a corresponding power supply unit. This proven, economical, and modularly expandable 6-inch system allows you to fully utilize all the advantages of microwave-stimulated Heraeus Noblelight systems in your production process. The electrode-less emitter bulb enables effortless switching of emission spectra in laboratory operation and represents the most reliable, stable, and efficient UV curing system on the market. F300S systems are the curing system of choice when minimal downtime, minimal maintenance, and maximum product performance are the most important performance parameters. The optional F300SQ system features a quick restart function (QRM). Advantages: Simple installation Electrode-less technology More efficient and faster UV curing of high peak Simple, user-friendly control Lowest acquisition costs Robust and reliable Popular lamp spectra available Itedpsg H Sywofx Ag Ajn Possibility for processing heat-sensitive substrates – less heat compared to mercury vapor lamps This compact system includes a 6-inch wide emitter (lamp module), an electrode-less bulb, a power supply, and an integrated fan for cooling. Bulb length: 15 cm Power class – 120 W/cm (300 W/in) Irradiation width 150 mm Guaranteed emitter life of 6000 - 8000 operating hours No aging behavior due to reduction of emission and/or shift of the emitted spectrum High UV/low IR output. Optimized emitter design for maximum UV output with minimal infrared radiation. Less heat to the substrate. The power supply can be placed anywhere and connected to the emitter module via easily installable cables. Focused elliptical reflector. Concentrates maximum UV energy on the substrate Cooling air – integrated fan 2.7 m3 Reflector geometry: Hemispherical, focused at 53 mm (2.1 inches) from the irradiation surface Power setting – optional quick restart available Compatible with LC6B and DRS 10/12 conveyor systems Cooling: 2.7 m3 Supplied by integrated fan Power supplies – P300MQ power supply Quick restart function: Maintains a low power consumption of the bulb in standby mode (up to 40 seconds) to enable a restart of the lamp at any time. 24-second cooling phase On/off/standby control, safety interlocks, production line connections, production interlock, pull-out control panel, complete error display, master/slave option, connectivity Power connection: 200–240 V, 18 amps, 50/60 Hz, 1 phase Dimensions: External: WxDxH 1400 x 900 x 2200 mm Chamber: WxDxH 600 x 500 x 1100 mm Door opening: 780 x 520 mm Weight: 40.3 kg You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2005, functionality: fully functional, 6 high-speed doors available in good condition. Price per unit: €4,000. Dimensions: Width 4 meters, height 4.20 meters. Immediately available. Ijdpfxehigmmj Ag Astn

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,620 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,300 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, overall weight: 11,000 kg, table length: 1,700 mm, table width: 620 mm, controller model: TNC 7, coolant supply: 20 bar, rapid traverse Z-axis: 30,000 m/min, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rotational speed (max.): 10,000 rpm, spindle nose: SK 40 BIG PLUS, table load: 1,300 kg, tool diameter: 150 mm, tool length: 300 mm, tool weight: 8 g, Equipment: CE marking, chip conveyor, documentation/manual, rotational speed infinitely variable, LAGUN L 1600 Machining Center – available for short-term delivery The LAGUN L 1600 machining center, in a cross table design, stands for high precision, robust construction, and economical production. Ideal for mechanical engineering, mold making, and contract manufacturing, as well as for a wide range of demanding machining tasks. Your advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24 months warranty Technical equipment: Control system: • HEIDENHAIN TNC 7 basic digital control • HEIDENHAIN 16" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Including the following accessories: ✔ Longitudinal hinge-belt chip conveyor ✔ Preparation for the integration of a rotary table ✔ Full enclosure with side-opening viewing windows ✔ Ergonomic L-shaped control panel Accuracy: Positioning accuracy: ± 0.005 mm Itedjhy Atiopfx Ag Ajn Repeatability: ± 0.003 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 3 RT – available for short-term delivery The LAGUN BM 3 RT is a highly stable bed-type milling center with a rotary table, offering high flexibility, stability, precision, and economical operation – all without the need for complex foundation work. Your advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24 months warranty Technical equipment: Control system: • HEIDENHAIN TNC 7 digital path control • HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip removal: Double-hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Iedjhy At Ajpfx Ag Aetn Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare a customized offer.

Condition: as good as new (ex-display), Year of construction: 2026, The compelling advantages: Space-saving, compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area due to air guide plates – making it suitable for larger workpieces. Separation rate of paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Easy and quick filter replacement on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan including throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in operation. The IPE double filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² of filter area) due to the folded filter pockets than conventional filter mats. The downstream fiberglass secondary filter only captures the finest remaining particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only after every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors on the floor or from floor pits. Due to this additional intake opening facing downwards, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also simplifies filter replacement here. Standard extraction capacity Easy Paint 7000 Article number 600027 Air flow rate with standard delivery * 7000 m³/h Primary filter area 3.7 m² Secondary filter area 3.0 m² Motor power 400V/50Hz 2.5 kW ex 2-pole Connection nozzle extraction hose D = 355 mm Width in mm 2845 Overall height in mm 1955 Depth in mm with capture area 1015 Weight in kg 180 Iedpfx Agjdqc U Ho Ajtn Location: In stock in Bitburg Exhibition machine at a special price.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 32,000 kg, Year of construction: 2021, operating hours: 1,477 h, machine/vehicle number: SP7097, Drive system: Diesel-electric drive (80 kVA) Iedpfx Agez H N N Ao Ajtn Throughput capacity: up to 200 t/h Metering hopper: 5 m³ Screen deck: Splitter Twin Wave (2 x 11 kW) Oversize material conveyor: discharge height up to 4,200 mm Undersize material conveyor: discharge height Transport dimensions: 12,100 x 3,000 x 3,500 mm (L x W x H)

Year of construction: 2009, condition: used, machine/vehicle number: 0201-260036, This drilling machine is ideally suited for the economical drilling, center punching, marking (scribing), and threading of profiles and flat steel bars in the steel construction and steel trade industries. The Kaltenbach KDXS drilling machine is equipped with 3 drilling units, each with a 26 kW drive power, and each with a 5-position tool changer. The Kaltenbach M150 length measuring device (measuring carriage) is designed together with the T13 transport system for profile lengths up to 12 m (other lengths optional). The transport system for material transport of profile steel also has transverse carriages at the infeed and outfeed points for the transverse transport of the profiles. The CNC control, together with the Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The complete system has an ergonomic working height from the material level to the top edge of the floor of 640 mm, thus providing good visibility for the operator. Ijdpoz Ih Efjfx Ag Ajtn

Condition: used, mileage: 111,706 km, power: 62 kW (84.30 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI offers a reliable transport solution with its robust construction and an efficient 2.0-liter diesel engine. With an output of 62 kW (84 hp) and a combined fuel consumption of 7.2 l/100 km, it meets the Euro 5 emission standard. Its spacious interior offers space for three people, and the double sliding doors on both sides facilitate access and loading. The practical truck registration and the robust wooden floor in the cargo area optimize transport for commercial use. The vehicle was first registered in July 2011 and has a mileage of 111,706 km. It is painted in the striking color Broom Yellow R1032 and comes with a 5-speed manual transmission. With a length of 4,892 mm, a width of 1,904 mm, and a height of 1,970 mm, the transporter offers sufficient space and storage capacity. It has a permissible total weight of 2,800 kg and a green environmental badge, which makes it suitable for inner-city transport as well. Iodpsz Ntk Defx Ag Aotn The T5 Transporter is ideal for business customers looking for an economical and reliable vehicle. The price is determined by factors such as mileage, year of manufacture, and condition. Optional registration and delivery services within Germany are also available. Viewings are possible in Rohrbach (Pfalz) without prior appointment. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: like new (used), Lehners Manual seeder for trays Itjdpfoz Rbg Aex Ag Asn This Seeder Unit is characterised by its stunning simple operation and economical running costs. It enables gardeners to work with suitable, natural seeds in grain or pellet form. Even small quantities of seeds can be sown without any problem. 1 seed plate 5,2 mm Seed container Suitable for trays with 285 cells More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: like new (used), Lehners Manual seeder for trays This Seeder Unit is characterised by its stunning simple operation and economical running costs. It enables gardeners to work with suitable, natural seeds in grain or pellet form. Even small quantities of seeds can be sown without any problem. 1 seed plate 3,4 mm Seed container Suitable for trays with 285 cells More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Itedpfx Agoz Rbg No Aon The specialist in used agriculture and horticulture machinery

Condition: good (used), Year of construction: 1995, Vito combi seal-shrink machine Cucumber seal machine for packing cucumbers and various other products such as leeks, corn and courgettes. Sealing prevents moisture loss, thus increasing shelf life. The machine consists of a seal and a shrink unit.The processing speed is adjustable.Operates with two rolls of film.With welded barsFan The cucumber is placed on the lay-on part of the machine on the chain in the bottom layer of film. In front of the sealing bar, the top layer of foil is placed on the cucumber, with the sealing bar melting the foil together. The cucumber is then transported through the chain to the oven. In the shrink tunnel, the film is tightly shrunk around the cucumber. This shrink unit consists of two ovens through which the cucumbers pass. Features of the Vito cucumber sealing machine: Adjustable speedPerfect seal seamVery economical with filmSimple operationHigh ease of useLow maintenance costsLong service life Vito machines have also been sold under the Brinkman and Bercomex names. More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Itjdpfxoz Rdrno Ag Asn Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: good (used), Gregoire mobile soil storage bunker Dosage bunker with bottom conveyorAprox. 2,5 m³ The soilbunker is a buffer/processingsystem to supply other machines soil, pellets or other products an economical and clean way. Operation: The movable bunker is an extremely flexible solution and suitable for handling of the loose soil, Big Bags or special small packaging. High-quality construction and maintenance freeClean, labour friendly working by a closed soilsystemEasy controlFixed speed380 Volt More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines Ijdpfxjz Rhiqj Ag Ajtn The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 150 mm, For sale is a Format-4 Profit H350R 5-axis CNC machining center, manufactured in 2021. This machine offers the highest precision, flexibility, and productivity for modern furniture, window, door, and interior design applications. Thanks to its powerful 5-axis technology, even complex machining operations can be carried out efficiently and economically. Technical specifications: Working area: X 3000 mm / Y 1550 mm / Z 150 mm 5-axis electrospindle with 12 kW power Ijdpsz Rn T Aefx Ag Aotn Tool holder HSK F63 Spindle speed up to 24,000 rpm Drilling head with 18 individually controllable drilling spindles Integrated nut saw unit Automatic central lubrication Cantilever table with vacuum clamping system 6 workpiece supports with stop system LED positioning system lightPos for quick and precise setup CNC control system including modern CAD/CAM connectivity The machine is in very good, well-maintained condition and is ready for immediate use. An ideal solution for craft and industrial businesses that value the highest machining quality and maximum flexibility. Special equipment: 001 Voltage supply 3x 400V; 50 Hz / 60 Hz 007 Motor 12 kW C15 Enclosed cable carrier in X and Y travel C41 Safety system with bumper including pendulum operation instead of light curtain C98 Optical status display of the machine 480 Vacuum release per console C58 Monitoring of all stop cylinders with 2 stop rows (6 workpiece supports) C91 Additional locking of the C/A axis C197 Pick-up station for saw blade, moving with X C198 4-fold linear changer, moving with X C29 Mobile control terminal instead of fixed control terminal C100*8 Vacuum suction cup FA 140 x 115 x 100 mm C101 Vacuum suction cup FA 125 x 75 x 100 mm C492 300-05-312 - F4Design-PLATINUM (without PP) C496 300-05-316 - F4Design - 4 axis post-processor Scope of supply: Includes transport and installation in the postcode areas 70, 71, 72, 73, 77, 78, 79, 86, 87, 88, 89 F4Integrate training for 4 people in 88299 Leutkirch Without tooling

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 62,000 kg, coolant supply: 36 bar, workpiece weight (max.): 62,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The LAGUN CM 8 is a high-performance traveling column milling machine for the precise and economical machining of long, large, and complex workpieces. The flexible traveling column concept is ideally suited for machine and plant construction, job-order manufacturing, and demanding machining tasks with high requirements for accuracy, stability, and flexibility. Itsdom Tv D Ajpfx Ag Asn Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase ✔ 24-month warranty Technical equipment: Control system: • 2 × HEIDENHAIN TNC 7 digital control Two separate operator stations – one at the front of the machine and one in the rear cabin area • 2 × HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Coolant supply: • Internal coolant supply (ICS), 36 bar Tool changer: • Automatic tool changer (ATC), 60-position Chip disposal: • Hinged belt chip conveyor Preparation: • Preparation for NC rotary table / 4th axis Machine enclosure: • Three-sided perimeter enclosure Accuracy: • Positioning accuracy: ± 0.040 mm • Repeatability: ± 0.008 mm Contact us – we will be happy to advise you and prepare an individual offer for your machining requirements.