Used Hettich Drilling And Press-In Automatic Machine for sale (89,318)

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg Lsdpfx Amegv I N Uomohh 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg Lhodpfjdfc Iksx Ammeh 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: THE MACHINE WILL BE BRAND NEW The compression chamber walls are covered with HARDOX material for long-term life-cycle and friction resistance. A hydraulic Oil Cooling system is implemented for efficiency in hot climate conditions. Cylinder Rods are induction-hardened and chrome-plated. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER, and BOSCH-REXROTH. The machine is fully automatic by PLC control. It is easy to use with the help of the touch screen. All electrical and electronic parts are by SCHNEIDER and SIEMENS Brands. The machine is CE-certified. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours. SEE THE TECHNICAL DESCRIPTION BELOW Lhjdpfx Amjd Iya Nomeh Bale Size 400mm x 400mm x... Bale Weight 100-180 kg (Steel), 40-100 kg (Aluminium),120-180 kg (Copper) Press Box Dimensions (Width x Length x Height): 1.000mm x 2.600mm x 900mm Loading Bunker Dimensions (Width x Length x Height): 1.500mm x 2.200mm x 650mm Feeding Opening: 1.000mm x 1.600mm Capacity*

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Lodowrkctepfx Ammohh Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: excellent (used), functionality: fully functional, power: 735.5 kW (1,000.00 HP), Year of construction: 2015, Oil drilling rig National 80 UE 1000 HP Year of manufacture: 2015 Fully operational Lhedpfx Aex Nc Ddommoh

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg Lhjdpfx Aswzzzfjmmsh

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) Lsdpfx Amemmuq Ijmohh ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) Lhjdpfx Amjmr Hpcomsh ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Lodeq Nf S Ropfx Ammohh Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: good (used), NM-420 W30 Banding Machine This brand new machine is based on proven Western designs. Year of manufacture: 2025. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Lhjdpfx Ajy Tu Rdemmsh Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 26 cycles/min Dimensions of the banded product: 400 x 200 mm The kit includes tapes and an instruction manual.

Condition: good (used), Busch TB24 I Banding Machine The machine is in very good condition. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Lhjdpfx Ajy Sfa Hommjh Technical specifications: Tape width: 30 mm Cycles per minute: 20-25 cycles/min Band dimensions: Length: unlimited Width: Paper – 24 cm Foil – 18 cm Height: 15 cm. The machine comes with: spare bands, an instruction manual, and a machine cover.

Condition: new, Fully automated machines for standing seam sheet metal profiling (CLICK), available in various sizes and designs. We offer several standing seam profiles. Delivery times and machine configurations are determined on a case-by-case basis for each order. Please contact us for additional information and technical documentation. Roll forming machine. Lodpfoy Rkuyox Ammshh

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Lhjdpfx Amsy Nzltemeh Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg.

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Lodpjy Nzlmofx Ammohh Ideal for wrapping business cards, flyers, calendars, and other materials. Can be used with paper or foil tape. Technical specifications: Tape width: 29 mm Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Made in Japan.

Condition: new, Year of construction: 2026, machine/vehicle number: PB-70/250-1000NC-2C, functionality: fully functional, power: 20 kW (27.19 HP), input frequency: 50 Hz, type of input current: three-phase, total length: 30,000 mm, total width: 5,000 mm, total height: 3,000 mm, overall weight: 10,500 kg, Equipment: CE marking, documentation/manual, Our welding and spacer bending line is a fully automatic system with PC control, designed for fast and precise production of reinforcement elements. It is equipped with 4 × 45 kVA transformers, 20 kW electric motors, and a 3 × 400 VAC, 50 Hz power supply. The machine processes longitudinal wire with a diameter of 3.5–5 mm and diagonal wire of 3.5–4 mm. It supports a 150 mm step, adjustable heights from 70 to 250 mm, spacer length of 2400 mm before bending and 2050 mm after bending, as well as simultaneous transformer activation to optimize the welding process. With a welding speed of 30 m/min, a weight of 10.5 t, and dimensions of 30 × 5 × 1.5/3 m, it enables efficient and reliable serial production. Lhodpfxey Iyyge Ammjh

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press Lhsdpfx Amjy Uiyvomjh This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Ledpfoy Uc Nkjx Ammjhh Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: excellent (used), Automatic Pocket Machine . We have more models available .All machines have 6 months warranty .Worldwide delivery . Over 25 years of experience . Yamatex Lsdpfxjy H Sh Te Ammjhh

Condition: new, Applications: Lsdpjiwut Tjfx Ammshh Production of concrete blocks for wall, foundation, pillars, roofs, chimneys. Production of concrete pieces for water drainage Advantages: optimal distance between the mould and the over-mould ensures a comfortable position for the operator - Handling the steering wheel requires minimal effort thanks to a gear force reducer; - Simple operation and maintenance professional vibrator with low power consumption Automated stopping of the vibration once demolding occurs Wide variety of molds - there is the possibility of installing moulds for high concrete elements (maximum 370mm)* Technical specifications: Maximum mold dimensions: 800x500mm Maximum height of end product: 370mm Cycle duration: 60 seconds Supply power: 0.28kW Supply voltage: 220V Overall dimensions: 1.35x 1.55 x 1.7 m Machine weight (including a mold): 400 kg Vibrator rotation speed: 3000rpm Concrete consumption: 2 m3/hour Recommended concrete mixer: MX300L

Condition: new, Year of construction: 2025, Case Maker with Robotic Hand – High Efficiency Book Cover Machine We are offering a high-quality case making machine designed for the production of book covers, notebooks, and similar hardcover products. Equipped with a robotic hand, this machine ensures precision, consistency, and efficient handling during the production process. It is suitable for working with a wide range of materials, including gray board, MDF, wooden boards, mirror board, as well as various cover materials such as art paper, specialty metallic papers (gold/silver), fabric, and velvet. Ideal for print shops, binderies, and packaging manufacturers looking to improve productivity and product quality. Working speed: 15-28 pcs/min Max hardcover size: 460x300mm Min Hardcover size: 55x60mm Case Thickness range: 1-12mm Cover Thickness range: 100 -250 g/m2 Case materials range: Gray board, wooden board. mdf, mirror board Lhedpey Dqx Sefx Ammsh Cover materials range: Art paper, Silver/gold paper, Fabric, Velvet Machine dimension: 1150x1500x1700mm Machine weight: 650kg

Condition: new, HORIZONTAL BAND SAWING MACHINE A 1200 BIG 150 Successor of A-1200 PLUS In addition to the functionality of its predecessor, the A 1200 BIG 150 is significantly larger, which results in increased performance. It is used for longitudinal cutting of wood in the form of beams, square timbers and planks. Thanks to its design, it can be operated by one person, which is now a valuable advantage of every industrial machine. Fittings: Length of the log cut: individually to the needs of the recipient Diameter of the processed log: 1500 mm Guide wheel of the bandsaw: 600 mm Band saw: length: 61500 mm Width: 40-50 mm Main engine: 15 kW Electric lifting up / down Smooth feedrate control Hydraulic tension of the saw Average efficiency: 1-1.5m3 / hour (Depending on the size of the log) In addition, the A 1200 BIG 150 can be equipped with: increasing power to 18.5kW or 22kW electrically moving roller bark cutter SELBIT ISP-10 microprocessor cutting thickness controller operator seat stationary desktop plank discharge bed extension Lodpfx Asu Sg A Ujmmohh Hydraulics: Hydraulically raised retaining arms loading of the log leveling holdfast chain rotator leveling with hydraulic drive hydraulic aggregate 5.5kW

Condition: new, Year of construction: 2025, Portable machine for standing seam system was designed to profile double standing seam panels that are used for installation of standing seam roofing systems. Main Technical Data: Size: 1600x850x1000mm Weight: 250 kg Motor Power: 1.5kw Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz Lhodpfsf Ih Hcex Ammjh Forming Steps: 6 steps Forming Steel Thickness: 0.4-0.7mm Forming Aluminum Thickness: 0.7-1.0mm Height of Roofing: 25mm Material Width: 250-700mm Tolerance: +-1mm Roller material: high grade 45# Material of principal axes: high grade 45# steel For this price we offer roll former roofing machine F3 +cross cutting knife +rolls for ribbed panels also you can get: - Rolls for ribbed panels - Floor decoiler - Hand seamers - Electric seaming machine -Punching press for clips Dimension: 160.00Sm x 85.00Sm x 100.00Sm Weight: 280.00Kg

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Lhjdjq U N T Rjpfx Ammsh Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: new, Year of construction: 2025, Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at the one side of this standing seam machine and turning it around the operator can change the width of the panels. So the adjustment of the standing seam roofing machine doesn’t take a lot of time for the operator and let him use his working time more effectively. This double standing seam roofing machine is good for making double standing seam panels from different kinds of metals (galvanized steel, steel coated with copper, zinc, titanium, etc.) This standing seam roofing machine has six pairs of rolls which form the shape of the double standing seam roofing panels. This machine could be produced for using with 220V or 380V electric lines. You can also purchase with roofing seam machine: additional pair of rolls for making ribs on the roofing panels; additional pair of rolls for making bended panels with a big radius of bending; cutting knife; Lhedpohz Twwefx Ammoh metal decoiler; manual tool for closing seam lock; electric machine for closing seam lock; sheet metal cut to length machine; It’s easy to work with our double standing seam roofing machine right on the place of the double standing seam roof installation, thanks to the small weight and not huge sizes of this standing seam machine. It’s let the owner of this roofing machine to save money not spending them on renting additional places for making double standing seam roofing panels, storage them and transport to the place of their installation. Our enterprise has started producing of this double standing seam roofing machine since 2005 so we have great experience in doing our job and can propose you a great solution for your business. To get more information about the price of this double standing seam roofing machine and the way it could be delivered to your location just contact us. We will give you all the information you need.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH tertiary impact crusher is an advanced crushing machine that provides high efficiency in rock crushing and sand making processes. It delivers superior performance, especially in crushing medium-hardness materials with low abrasive properties. This machine stands out with its ability to produce fine, cubic-shaped material down to 0.5 mm in a single pass. It is an ideal choice for producing high-quality aggregate in sectors such as construction, ready-mix concrete production, and asphalt applications. Tertiary crushers ensure that the material is produced in homogeneous sizes during the crushing process and enable more efficient utilization of the material thanks to their high reduction ratio. With these features, the CONSTMACH tertiary crusher is also frequently preferred as a “sand making machine” in stone crushing plants. Thanks to its high-speed rotating rotor system and adjustable crusher plates, the material can be crushed to the desired fineness. The hydraulic opening and adjustment mechanism allows operators to perform maintenance and replacement operations safely and quickly. Replaceable wear parts ensure long-term use and low operating costs. Furthermore, its design, suitable for operation in closed-circuit systems, provides consistent quality across different product sizes. Tertiary Crusher Technical Specifications MODEL: CTC - 1275 Rotor Diameter: 1,100 x 750 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 100 mm Capacity: 60 - 80 t/h Motor Power: 110 kW Weight: 9,500 kg MODEL: CTC - 1210 Lhjdpfx Amoxpvb Hsmoh Rotor Diameter: 1,100 x 1,000 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 120 mm Capacity: 80 - 135 t/h Motor Power: 160 kW Weight: 12,500 kg MODEL: CTC - 1212 Rotor Diameter: 1,100 x 1,200 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 120 - 170 t/h Motor Power: 200 kW Weight: 15,500 kg MODEL: CTC - 1215 Rotor Diameter: 1,100 x 1,500 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 230 - 250 t/h Motor Power: 250 kW Weight: 18,500 kg Why Choose CONSTMACH Tertiary Crushers CONSTMACH offers reliable solutions in crushing, screening, and concrete production equipment that meet international standards. Our tertiary impact crushers increase your operation's production efficiency with high quality, durability, and low maintenance costs. We are always by your side during the after-sales process with our spare parts and technical support services. If you are looking for a long-lasting, energy-efficient, and high-performance stone crushing machine, CONSTMACH is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.