Used Holzprofi G-4-5Fk126370R for sale (77,092)

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg Njdpfx Asguk Dksdrewi - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Nwedpfx Ajfdkbhodrsi Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) Njdpeguk Dvefx Adrewi - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1090, The TB6/SB MOD 140, manufactured by Giani F.lli L. & G. s.n.c. (Italy), is an industrial slitter machine designed for longitudinal cutting of film, paper and packaging materials. The machine features a robust construction and reliable cutting performance, making it suitable for continuous industrial operation. It is commonly used in converting, packaging and film processing industries where precise cutting and stable material handling are required. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Giani F.lli L. & G. s.n.c. (Italy) • Machine type: Slitter / longitudinal cutting machine • Model: TB6/SB MOD 140 • Serial number: 1090 • Year of manufacture: 2007 • Certification: CE compliant Njdpoyghn Isfx Adrswi • Application: film, paper and packaging materials

Condition: new, Year of construction: 2020, Model: KPZ-2 Type: Enclosed Nedpfxeb Al Sbs Adrowi Working dimensions: 900 W x 1300 H x 900 D External dimensions: 980 W x 2100 H x 1600 D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of filters: 3 Filter area: 22.5 m² Fan: Aluminum Fan noise level: 74 dBa Air flow: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available upon request.

Condition: new, The new small professional turning lathe by Holzprofi Maker stands out due to its precise workmanship, stepless speed and left/right-turning. Cast iron drive unit and bed. Motor is splashprooved for wet wood turning. Standard equipment: quick adjustable tailstock rest grab chuck face plate live center Nwodjx H Ufzjpfx Adrsi Technical data: Distance between centers 640 mm Dist between centers with opt. extension 1120 mm Center height 204 mm Tail stock thread M33 Din 800 Motor power 2,2 kW, S6 Speeds variable 100-1200 100-3200 rpm Voltage 230 V Weight 135 kg

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Nedpfsx H Uctjx Adrjwi Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Condition: as good as new (ex-display), Exhibition Machine Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel fence with micrometric fine adjustment. Saw blade tilting up to 45° via handwheel. Table opening ø260 mm with under-table extraction. Milling fence 250 mm. Slot mortising table with Westcott collet chuck, Mori safety device. Exchangeable milling spindle with MK4 mount, made in EU! Jointer unit: Table width 410 mm Nwsdpswzzguefx Adrsi Table length 1800 mm Cutterhead diameter 100 mm Number of cutter knives 4 pcs Cutterhead speed 4500 rpm Motor output 5 kW (S6) (4 kW S1) Thicknessing unit: Thickness capacity min/max 4 – 225 mm Feed speed 8 m/min Spindle moulder: Usable spindle length 125 mm Spindle height adjustment 175 mm Motor output 5.5 kW (S6) (4.5 kW S1) Max. tool diameter: For profiling 250 mm For tenoning 300 mm Spindle speeds 10000/8000/6000/5000/4000/3000 rpm Table openings 260 mm Circular saw: Sliding table length 3000 mm Saw blade diameter min/max 315 mm / 250 mm Tilting range 90° - 45° Max. cutting height 90° / 45° Saw blade 315 mm 103 / 72 mm Motor output 5 kW (S6) (4 kW S1) Weight 1090 kg Slot mortising table: Table size 300 x 500 mm Drilling length 250 mm Drilling depth 210 mm Height adjustment 160 mm

Condition: new, machine/vehicle number: M1-ADM310G-Spiral, The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Nedpjvw Edwefx Adrowi Cutter block diameter 75 mm Planing width 300 mm Length planing table 1400 mm Admission height 240 mm Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 310 x 600 mm Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 208 kg Optional accessories: moving device

Condition: as good as new (ex-display), Demonstration machine Nsdpfxsx H Ukde Adrswi 2-chain infeed table with 2 hydraulic feed rollers Sample image

Condition: as good as new (ex-display), Exhibition machine The Holzprofi dehumidifier HT-100 is ideal for drying wood. The dehumidifier can also be used for drying cellars, construction sites, etc. Advantages and features: - High drying performance even at low temperatures, thanks to hot gas defrosting - Good dehumidification even at low humidity - High efficiency for energy-saving operation - High-quality machine from the industrial sector, durable and suitable for many purposes. - The practical control switches the dehumidifier off automatically when the desired humidity is reached. - Direct hose connection to drain large amounts of water without any problems Suitable for most soft and hard wood types such as spruce, beech, ash, as well as exotic woods and firewood. Due to the high tannic acid content, oak is conditionally or not recommended - as with other dehumidifiers. Technical data: Nominal power consumption: 1050 W Max. power consumption (35°C, 95% R.H.): 1480 W Njdpfevrvmxsx Adrjwi Air flow rate: 1100 mc/h Coolant: R410a (environmentally friendly) Operating range (temperature): 1-35 °C Operating range (relative humidity) T

Condition: new, The new Pilous double edger DB400Eco stands out for its excellent functionality and long service life thanks to its robust construction. Clearly positioned, easy-to-read scale. Supplied without saw blades. Developed, manufactured, and quality-tested in Europe! Technical specifications: Clearance width: 400 mm Maximum cutting height: 60 mm Maximum cutting width: 350 mm Width adjustment: manual Saw blade diameter: 2 x 300 mm, bore 60 mm Rotation speed: 2850 rpm Kerf: 3.2 mm Motor: 2 x 4 kW Feed speed: stepless, 4 to 18 m/min Nwedpfx Adsvrvgljroi Optional equipment on request: 2 lasers (1 fixed, 1 adjustable) Extras not included in the price (Representative image)

Condition: as good as new (ex-display), Technical specifications: Working width: 600 mm Max. tool diameter: 300 mm Clamping shaft D= 40 mm 2 feed speeds: 4.5 / 9 m/min Motor output S1 at 100%: 2 x 5.5 HP (4 kW) Max. workpiece height: 300 mm Working roller speed: 950 rpm Brush diameter: 120 - 300 mm Nodpfovrvw Dex Adrswi Total weight: 820 kg Extras not included in the price (Symbolic image)

Condition: new, Solid feed for commercial needs Nwsdpfxjvrv Ivs Adrsi Reinforced machine cast stand parts. With frequency converter and digital speed display Technical data: Number of feed rollers 4 Dimensions of the feed rollers 120x60 mm Speed ??continuously 2-22 m/min Motor output power S1 400W / 400V Weight approx. 70 kg

Condition: new, Aluminum format sliding carriage (anodized) with hardened steel guide rods. Kickback protection for thickness planer. Anodized parallel stop with micrometric fine adjustment. Slant adjustment of the saw blade up to 45° using a handwheel. Table opening ø190 mm with under-table suction. Milling stop 180 mm. Built-in milling spindle lock. Laying table with telescopic stop, eccentric clamp, degree grid 100% Made in EU (developed, built, quality tested) Technical data: Surface planing unit: Table width: 410 mm Table length: 1800 mm Planing shaft diameter: 100 mm Number of planing knives: 4 pieces Shaft speed: 5000 Motor output power: 5 kW S6 400V (4 kW S1) Thickness unit: Thickness passage, min/max: 4 - 230 mm Feed speed: 7 m/min Milling machine: Useful length of the spindle: 125 mm Height adjustment of the. Spindle: 160 mm Max. tool diameter when profiling: 180 mm when tenoning: 250 mm Spindle speed: 8000/6000/3500/1400 Table openings: 190 mm Integral stop: 500 mm Nsdpfx Ajvrvcaodrswi Motor output power: 3.8 kW S6 400V (3kW S1) Circular saw: Format table: 2300 x 285 mm Saw blade diameter max/min: 315 mm/250 mm Incline position: 90° - 45° Max. cutting height: 90° 45 ° Saw blade 315: 102/72 Motor output power: 3.8 kW S6 400V (3kW S1) Weight: 900 kg Optional accessories: Reversible blade (no extra charge) Spiral planer shaft Long hole board Scoring unit

Condition: as good as new (ex-display), The new lightweight wide belt sander from Hans Schreiner impresses with its solid construction, ease of operation, and infinitely variable speed control. Demonstration machine: Technical specifications: Sanding width: 450 mm Max. workpiece thickness: 125 mm Nwedpfx Asvrvv Tedrei Min. workpiece thickness: 8 mm Feed speed (stepless): 2–6 m/min Sanding drum diameter: 82 mm Sanding belt dimensions: 457 x 1003 mm Motor output: 3 kW S6 (2.2 kW S1 100% duty cycle) Extraction nozzle: 100 mm Dimensions L x W x H: 1030 x 1000 x 1740 mm Weight: 215 kg

Condition: new, The new planer & thicknesser by Holzprofi Maker is convincing with it´s solid construction and high user-friendliness. Large planing shaft diameter for a very nice planing result Steel cutterblock, cast-iron table, mechanical digital pivoted aluminium stop, switchable feeder, noice reduced, motor protection, motor brake, no-voltage release, CE-conform technical data: Specifications: Motor power S6 3,8 kW (3 kW-S1) Dimensions of knives 15 x 15 x 2,5 mm Cutter block diameter 95 mm Planing width 400 mm Length planing table 1660 mm Admission height 230 mm Nsdpfxjvrvz Ns Adrewi Feed speed 6 m/min Suction diameter 100 mm Thicknessing table size 410 x 600 mm Max. chip removal (depending on board width and type of wood) 3-5 mm Voltage 400 V Weight appr. 334 kg Optional accessories: Moving device Service check for spiral cutter block

Condition: as good as new (ex-display), Demonstration machine Year of manufacture: 2022 Nedpfjvrvncox Adrswi The new FSN jointer-planer combination machine stands out with its robust construction, heavy-duty cast iron tables with ground surfaces, and modern handling. The machine is space-saving and extremely comfortable when switching from jointing to planing mode. The jointing fence is adjustable up to 45°. The substantial thicknessing table guide ensures excellent planing quality. A mechanical digital display allows for precise reading of the thickness setting. CE compliant, 100% Made in EU (designed, built, and quality-tested) Jointer: Table size: 1500 x 320 mm Max. depth of cut: 5 mm Cutterhead diameter: 100 mm Number of knives: 3 pcs Thickness planer: Table size: 700 x 316 mm Max. depth of cut: 4 mm Feed speed: 8 m/min Motor output: 3.8 kW S6 (3 kW S1) Weight: 360 kg Accessories not included in the price (Sample image)

Condition: as good as new (ex-display), Technical data: Suction capacity 5200 m3/h Static negative pressure 3100 PA Hose connection 250 mm Weight 71 kg Nedpfjvrvtfsx Adrewi Motor output power S1 4 kW

Condition: as good as new (ex-display), Holzprofi feed VSHP34, number of feed rollers 3, dimensions of the feed rollers 120x60 mm, speeds 8 (4 forward, 4 backward), 4/8/10/20 m/min, motor output S1 1 HP 400 V, weight approx. 70 kg. Njdpfxsvrvxuo Adrewi Symbolic photo!

Condition: new, The new combined planer and thicknesser FSN by Holzprofi convinces with a solid construction, a strong cast iron table,a grounded surface and a modern handling. The machine is space-saving and very comfortable at changing from planing to thicknessing. The profi aluminium fence is 45° rotable and guided on the transverse side. A mechanical LCD-display guarantees a perfect reading of the thicknessing height. CE conform, Made in EU Spiral cutterblock for cutting insert HM15x15x2,5 mm R95 three row arrangement of the 66 cutting inseres incl. torque key. Technical Data: planing: Working table dimensions: 1800x410 mm max. cutting depth: 5 mm planer shaft diameter: 100 mm cutter knives: 4 thicknessing: Working table dimensions: 406x700 mm max. cutting depth: 4 mm feed speed: 6m/12m/min motor power: 5 kW S6 400V (4kW S1) weight: 450 kg Nwsdpevrvbpsfx Adroi Accessories optional: mortising unit

Condition: new, The heavy duty circular saw is suitable for cross cuts and longitudinal cuts. The rotary disc and the tiltable sawblade allow a large variety of applications, such as rafter cutting, ripping, mitre and straight cross cutting. It allows the production of valley- and hip rafter as well as the cutting of gutter boards and wedge blanks. Solid and easily adjustable saw unit for cutting heights up to 120 mm. Simultaneously adjustable rotary disc (up to 90°) and sawblade (up to 45°) User-friendly saw unit convenient for various cutting operations. Lever allows for cross cutting, saw unit travels from bottom to top. technical data: Table size 715 x 945 mm Max. sawblade diameter 400 mm Max. cutting height 90°/45° 120/90 mm Nodpfx Aevrv E Uedrowi Table height 845 mm Moveable infeed roller table 1000 x 550 mm Moveable outfeed roller table 1000 x 550 mm Speed main sawblade 2800 rpm Dust extraction outlet 2 x 100 Motor power output S1 2,8 kW (3,8 HP) 400V Motor power input S6 3,9 kW (5,3 HP), 400V Dimensions 1350 x 1100 x 1180 mm Dimensions with roller table 3380 x 1400 x 1180 Weight approx. 210 kg Standard accessories: Carbide sawblade 400 x 30 x 3 mm, protective cover with dust extraction outlet, roller table, carriage, tool storage, fixed roller table, splitting wedge

Condition: used, Bandsaw at a top price: The new stable and robust joiner's bandsaw from Holzprofi impresses with its superb build quality, outstandingly smooth operation, and comprehensive features. Standard equipment: Cast iron wheels, cast iron table, laser, dual-sided adjustable mitre gauge, and professional rip fence Technical data: Blade speed: 1130/520 m/min Motor output: 2 kW S6 (1.5 kW S1 100% duty, 400 Volt) Wheel diameter: 480 mm Cutting width: 462 mm Nodpfxswzzgzs Adrswi Cutting height: 300 mm Table size: 678 x 490 mm Blade width: 10 – 25 mm Table tilt: up to 45° Blade length: 3632 mm Weight: 145 kg

Condition: used, Year of construction: 1978, machine/vehicle number: 150 359 - 11683, functionality: fully functional, For sale are the PS160 (2 units) and the PS140 (1 unit). One is 250 metric tons, the other is 140 metric tons. The PS160 is one of the complete machines and is in operation; the PS160 does not have the control cabinet. The machines are for sale as a single unit and individually. Inquire by phone or email! Nwedpet Ucpbjfx Adrsi

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: steel, Year of construction: 2023, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension = Notes = Fuel tank: 400 liters Air conditioning Reinforced clutch Nwedpfswgk Edox Adrsi = Further Information = Transmission: TipMatic 12.28OD, automatic Year of manufacture: 2023 Tire size: 315/80R22.5 Suspension: Leaf spring suspension Front axle: Steerable Number of cylinders: 6 Engine displacement: 10,518 cc GVWR: 33,000 kg = Company Information = WE PROVIDE, YOU ACCELERATE. Without limits. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. We offer comprehensive after-sales services, including supplying parts and providing (local) training.