Used Hot Press Model Simi 4Lp for sale (29,830)

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Njdjzdd Rgepfx Ac Tjcu Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top)

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT Ncjdpfx Acjzb Iiho Tju PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: ready for operation (used), Year of construction: 1996, machine/vehicle number: 755T, functionality: fully functional, cutting length (max.): 3,050 mm, sheet thickness steel (max.): 8 mm, No minimum price – guaranteed sale to the highest bidder! Nsdpszd U R Nefx Ac Tecu Includes a second Siemens S5 control unit as a spare part! TECHNICAL DETAILS Steel sheet thickness: 8 mm Cutting length: 3,050 mm MACHINE DETAILS Hydraulic pressure: 250 bar Total weight: 10,000 kg EQUIPMENT Cybelec documentation Wiring diagram Second Siemens S5 control unit (spare)

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Ncedpfx Ajh I Euasc Tou Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Noise Tamer Sound Enclosure Refurbished and Ready to Run Several similar machines available

Condition: excellent (used), Year of construction: 2014, Willemin-Macodel SA Model 308B 5 Axis Machining Center Mfd. 2014 X 160 mm Y 120 mm Z 150 mm # Axis 5 Power 7 hp RPM 30,000 RPM # ATC 28 Taper HSK E32 Willemin-Macodel SA Model 308B 5 Axis Machining Center (2014) X1 6.300" Y1 4.720" Z1 5.910" A1 360.000° B1 130.000° Taper HSKE32 Rapid Feeds 1,181ipm Equipped With 5 Axis 28 Position ATC 30000 RPM Pallet Recognition Ncsdey Abcxjpfx Ac Tju Fire Protection Auto Fire Suppression Filter Mist Extraction

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Max length workable: 2500 mm Max height workable: 1340 mm Ncsdjx A Hfvepfx Ac Tju Max feed speed: 40 m/min

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Ncodpfex A Hfpsx Ac Tju Max length workable: 2600 mm Max height workable: 1300 mm

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Max working width: 880 mm No of Pressing cylinders: 4 Ncedpfxex A Tf Aj Ac Tsu No of Daylights: 1

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Ncedpfx Acortrzds Tou Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Nedertrykspfx Ac Tscu Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Year of construction: 1999, color channels: 8, We offer this used Heidelberg Speedmaster 74 8 Color Plus Coater 4/4 offset printing press, year of construction 1999. Manufacturer: Heidelberg Model: Speedmaster 74 8 Color Plus Coater Perfecting 4/4 or Straight Year of manufacture: 1999 Console CPC 1.0.4 Technotrans Cooling Unit Nedsynvurspfx Ac Tecu Condition: used Category ID: 839 Type ID: 520 Type: offset printing press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Nodpfxjw Nbh Hs Ac Tjcu Contact to set up in person inspection.

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Ncedpfoxnikljx Ac Teu

Condition: used, Used Winkworth model ZX500-6 stainless steel jacketed z-blade mixer / extruder. Approximate working capacity 500 litre with total capacity 778 litre (product dependent). 304 stainless steel chamber measures approximately 1,090mm long x 956mm wide x 735mm deep. Unit has domed hood/lid with clamps. 304 stainless steel external jacket. Each Z-blade driven by 30kw motor/gearbox. Stainless steel screw discharge driven by 22kw motor/gearbox. Unit includes control panel. Includes (1) used Tool Temp model TT-14500 H and (1) Used Tool Temp model TT-508 X heater/cooling units. Also includes (3) Hydac oil coolers mounted on common frame. Unit has main control unit and local operator controls. Nodeykn Tfopfx Ac Tocu

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: AGO SP40/650, Hahn & Kolb AGO SP40/650 Manual Spindle Press – 40 Ton – Made in Germany Heavy duty industrial manual spindle press manufactured by Hahn & Kolb Stuttgart, Germany. Model AGO SP40/650, built in 1989 with 400 kN pressing force (approx. 40 ton). Ncjdpfxjy R Dxle Ac Teu Extremely robust precision-built machine suitable for pressing, forming, straightening, assembly work, tooling and general engineering applications. Large flywheel operation with adjustable ram and heavy cast construction throughout. Machine Details: Manufacturer: Hahn & Kolb Stuttgart Model: AGO SP40/650 Year: 1989 Press Force: 400 kN (40 Ton) Manual spindle operated Heavy industrial cast construction Precision guided columns Made in Germany Condition: Good used industrial condition. Clean machine with solid operation and very little wear for its age. Ideal for engineering workshops, fabrication shops, toolrooms or industrial production use. Loading available on site. Transport can be arranged. Open to sensible offers.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 225 t, stroke length: 200 mm, table length: 4,100 mm, overall weight: 15,000 kg, Equipment: safety light barrier, Fully Serviced Bystronic CNC Pressbrake Available for Purchase A high-quality, pre-owned Bystronic Xact Smart 225/4100 hydraulic downstroke CNC pressbrake is currently available for sale. This 2019 machine is fully serviced, operational, and ready for immediate deployment. Key Technical Specifications Manufacturer: Bystronic Model: Xact Smart 225/4100 Year of Manufacture: 2019 Bending Capacity: 225 tons Bed Size / Working Length: 4,100 mm (4 metres) Control System: ByVision touchscreen CNC control Total Axis Configuration: 7 axis total, featuring a 5-axis backgauge (X, X1, R, Z1, Z2) Crowning: Hydraulic deflection compensation Installation Requirement: Free-standing design; no foundation pit required Core Advantages Nodpfxszg Nq Ns Ac Tscu High Precision: The 5-axis backgauge and hydraulic crowning ensure exact bending angles across the entire 4-metre bed length. User-Friendly Interface: The intuitive ByVision touchscreen control simplifies setup and reduces programming time. Cost-Effective Installation: The free-standing configuration eliminates the need for expensive floor excavations or pits. Feel free to let us know if you would like us to draft a formal quotation for you

Condition: excellent (used), Year of construction: 2017, Technical Specifications: Total pressing force 1500 kN Setting range 10 – 100 % Total pressing surface 3100 x 1350 mm Specific pressure at full charge 3,6 daN/cm² (kp/cm²) 6 cylinders 90 mm diameter 400 mm stroke Nodpozd T Uysfx Ac Tscu Operating hydraulic pressure 395 bar Daylight height 400 mm Daylights 2 Daylight opening 150 mm 400V 50Kz 3 phase CE 3 pieces heating devices each with 18 kW for heating up the fluid medium water to a working temperature of 130°C.

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Njdpomrrwfofx Ac Tscu Please note that the photos probably show two different ovens, both are very similar.

Condition: used, color: other, Dimensions (LxBxH): 20 x 20 x 1 cm Feeding system for flat and angle steel Equipped with a feed cart and material clamp Equipped with Vacon 110 software with CNC control Hydraulic shears for flat steel – VPS 2200 Cutting force: 220 metric tons Maximum length: 15,200 mm Maximum width x thickness: 500 x 25 mm Cutting angle: ± 45° Hydraulic angle shear for steel – VHS 2400 Cutting force: 240 metric tons Maximum length: 15,200 mm Maximum angle steel dimensions: 200 x 200 x 16 mm Nsdpfx Acszhatwj Tjcu Hydraulic punching – VPO 1000 Punching force: 100 metric tons Punching capabilities: Punch diameter / thickness: Ø 57 mm / 15 mm or Ø 32 mm / 25 mm 4 punching units for flat steel (vertical position) 1 punching unit for angle steel (horizontal position) Includes tools Hydraulic counter / numbering machine – VNI 1/36 1 coding disc 36 characters Character height x depth: 10 x 1 mm Hydraulic power unit – VHA 37 Power: 37 kW Pressure: 250 bar Total length: 29 meters Total width: 5.56 meters Online auction of machinery and equipment from a steel fabrication company due to relocation, including a VOORTMAN CNC flat and angle steel processing line, MICROSTEP plasma cutting machines, a GEMA powder coating machine with drying oven and exhaust system, WHEELABRATOR blasting machine, MEUSER & CO radial drilling machine, DURMA CNC hydraulic guillotine shear and press brake, LVD press brake, HACO guillotine shear, BEHRINGER semi-automatic miter band saw, PEDDINGHAUS punching and universal punching-shearing machines, RÖSLER shot blasting machine, various DEMAG overhead cranes, VERNET DIJON forging hammer, AMADA CNC punching and nibbling machines, METORA band saw with roller conveyor, etc. The online auction opens Thursday 25 June and closes Tuesday 7 July. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Pickup day is on: - Thursday 9 July Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 1991, Used squaring shear from Haco Type TS 3012 Capacity: 3050 x 12 mm Ncodpfozhbglox Ac Tsu Adjustable back gauge Blades recently sharpened

Condition: like new (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 365 mm, table length: 2,100 mm, clearance between the columns: 540 mm, overall weight: 9,050 kg, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Make: Trumpf Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 2axis back gauge Njdpfx Aszfp D Tjc Tocu • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, operating hours: 8,451 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 170 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, table width: 90 mm, table length: 1,270 mm, table height: 850 mm, throat depth: 350 mm, clearance between the columns: 1,050 mm, oil tank capacity: 80 l, total length: 2,150 mm, total width: 1,650 mm, total height: 2,300 mm, overall weight: 3,250 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake – 6 Axis – Delem DA-66Te Control Used 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Delem DA-66Te graphic control, Y1, Y2, X, R, Z1 and Z2 axes, tooling, laser guards and only 8,451 hours. Manufacturer: Ermaksan Model: Speed-Bend(SB) Pro 1270 x 40 Axes: 6 Year: 2016 Capacity: 1270mm x 40T Control: Delem DA66Te Description 2016 Ermaksan Speed-Bend Pro 1270 x 40 CNC Press Brake, a compact, high-quality 6-axis CNC hydraulic press brake ideal for precision sheet metal bending, fabrication workshops, engineering companies and production environments. This Ermaksan Speed-Bend Pro 1270 x 40 offers a bending length of 1270 mm and a bending power of 40 tonnes. It is fitted with a Delem DA-66Te graphic CNC control, providing a clear touch-screen interface for accurate programming, bend sequence calculation, tooling setup and repeatable production bending. The machine is in very good condition and has completed only 8,451 hours. It comes complete with Euro-style top and bottom press brake tooling, laser guards, foot pedal, quick-release top tool clamps and rear safety doors, making it a well-equipped used press brake ready for immediate inspection and production use. This is a superb opportunity to purchase a late-model, compact Ermaksan CNC press brake with a desirable 6-axis specification, ideal for companies looking for a reliable used hydraulic press brake in Ireland, the UK or Europe. Key Features Manufacturer: Ermaksan Model: Speed-Bend Pro 1270 x 40 / SB PRO 1270-40 Year: 2016 Type: CNC hydraulic press brake Bending length: 1270 mm Bending power: 40 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Delem DA-66Te Graphic CNC Control Hours: Only 8,451 hours Condition: Very good condition Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications – SB PRO 1270-40Model: SB PRO 1270-40 Bending length: 1270 mm Bending power: 40 tonnes Distance between columns: 1050 mm Y-axis rapid speed: 140 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 170 mm/s X-axis travel: 500 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis speed: 350 mm/s Z1 / Z2-axis travel speed: 1000 mm/s Backgauge finger blocks: 2 Oil capacity: 80 litres Motor power: 5.5 kW Stroke: 170 mm Daylight: 387 mm Throat depth: 350 mm Nodpfx Acjzdak Ae Tecu Table height: 850 mm Table width: 90 mm Machine Dimensions: 2150 x 1650 x 2300mm Machine weight: 3250 kg Standard / Included Equipment This used Ermaksan Speed-Bend Pro press brake is supplied with: 6 CNC axes: Y1, Y2, X, R, Z1 and Z2 Delem DA-66Te graphic CNC control Euro-style top press brake tools Euro-style bottom press brake tools Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Backgauge finger blocks Sheet support arms Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Continuous pasta press for short and long pasta. Bought for a project and never used. Nodpfx Acjyh Rdfj Tjcu

Condition: excellent (used), GEA FlowCook 8000/600. 8 metre cook length, 600mm wide. Excellent condition, has had very little use. Electrically heated. 283 KW Ncsdpfx Acex Ili He Tju

Condition: excellent (used), Suitable for filling a massive variety of products, for example; fertilizer pellets, toner powder, cat litter, granulated or powdered pet food, whole and ground coffee, sugar, plant food, powdered foods, plastic granules, ground spices, flaked spices, fine cut tobacco, whole and ground pepper, detergent powder, flour, infant formula, cake mix, matcha powder, cosmetic powder, curry powder, seeds, salt products, rice products, lentils, breadcrumbs etc. Ncjdpow H Adrefx Ac Tou