Used Hydraulic Distributor Block 2 1/2" for sale (110,195)

Condition: good (used), Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting Lrodsyx Ddqopfx Akuol -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 3,800 kg, Multi-pallet fork ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Ljdpfsyzvnajx Akuerl Technical condition: Good Description: Year 2017 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 580-2,210 mm Width 1,460 mm Forks 1,140 mm ID OS1955

Condition: used, functionality: limited functionality, Year of construction: 2017, load capacity: 3,200 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: poor Lsdpfeyzvmvex Akujrl Description: Year 2017 ISO 3A (51 cm) Capacity 3,200 kg Sideshift Opening range 540-1960 mm Width 1,200 mm Forks 1,200 mm Forks damaged ID OS1953

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 3,800 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Lredpeyzvmcsfx Akusl Condition: Ready for use and fully functional Technical condition: good Description: Year 2020 ISO 3A (51 cm) Capacity 3,800 kg Sideshift Opening range 660-2,910 mm Width 1,960 mm Forks 1,200 mm ID OS1947

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2011, tire size: 385/55/22.5, Year of construction: 2011, Lifting roof Separate floor/two-cylinder system Independent operation Remote control Ledeyxw A Tepfx Akujrl = Further information = Tyre size: 385/55/22.5 Rear axle 1: Steered; Tyre tread left: 65%; Tyre tread right: 65% Rear axle 2: Tyre tread left: 65%; Tyre tread right: 65% Unladen weight: 10,800 kg Technical condition: very good Visual condition: very good

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 2,200 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: normal Lodpfx Aksyzdf Tsusrl Description: Year 2017 ISO 2A (41 cm) Capacity 2,200 kg Sideshift Opening range 560-1960 mm Width 1200 mm Forks 1200 mm ID OS1940

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 2,200 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2015 ISO 2A (41 cm) Capacity 2,200 kg Sideshift Opening range 560-1,930 mm Width 1,200 mm Forks 1,150 mm ID OS1937 Lsdsyzdfyopfx Akuerl

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Lrodeyzdfgjpfx Akuol Condition: Ready for use and fully operational Technical condition: good Description: ISO 3A (51 cm) Capacity 3,500 kg Sideshift Opening range 560-2,410 mm Width 1,670 mm Forks 1,150 mm ID OS1933

Condition: used, functionality: not functional, load capacity: 2,600 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Ljdpjyzdc Ssfx Akujrl Condition: Ready for operation and fully functional Technical condition: For spare parts Description: ISO 3A (51 cm) Capacity 2,600 kg Sideshift Opening range 540-1,930 mm Width 1,250 mm Forks 1,150 mm Broken frame ID OS1922

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 2,600 kg, Double pallet fork ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Ledoyzdcfopfx Akujrl Technical condition: Good Description: Year 2013 ISO 3A (51 cm) Capacity 2600 kg Sideshift Opening range 560-1940 mm Width 1200 mm Forks 1200 mm ID OS1916

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 1,600 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Lrsdpfx Aeyzdb Uekuol Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 2A (41 cm) Capacity 1,600 kg Sideshift Opening range 560-1930 mm Width 1,100 mm Forks 1,000 mm ID OS1915

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Lredpfxoyzdbzj Akusl Description: Year 2011 ISO 3A (51 cm) Capacity 2,500 kg Sideshift Opening range 560-1960 mm Width 1,200 mm Forks 1,150 mm ID OS1907

Year of construction: 2024, condition: refurbished (used), functionality: fully functional, Steel gauge block set, accuracy class 1 according to DIN ISO 3650, with 103 pieces, supplied with a new calibration certificate bearing the accreditation symbol (DAkkS), issued to the buyer. Lsdpfx Asyyd Eqekuorl

Condition: excellent (used), functionality: fully functional, empty load weight: 11,500 kg, maximum load weight: 25,410 kg, overall weight: 36,910 kg, axle configuration: 3 axles, first registration: 01/2008, suspension: air, tire size: 385/65R22.5, color: silver, Year of construction: 2007, Equipment: ABS, tail-lift, For sale: Professional livestock semi-trailer by Gray Adams, model GAdd3T/4, year 2007. The trailer has seen little use, is fully operational, has undergone a recent inspection, and is ready for immediate operation. =====•••••===== NOTICE! Option to purchase the entire set together with the 3-axle tractor MAN TGX 28.480 (6x2 drive), which the trailer was paired with. 2014 MAN model with extremely low mileage—only 268,000 km! Well-maintained, continuously serviced, ready for operation, Euro 5 standard. The tractor is equipped with a spacious, comfortable cab, leather seats, two beds, coffee maker, and electric sunroof. Price for tractor unit only: €12,900 net Discounted price for combined set: €45,900 net We offer delivery of the entire set to any address in the EU or to a port under preferential conditions! =====••••===== Gray Adams specialist trailers are robust and reliable designs, engineered for transporting cattle, horses, and other livestock. A new trailer of this type cost over 900,000 DKK (~600,000 PLN net ≈ €130,000), reflecting the high build quality and durability of the Gray Adams brand. =====•••••=====•••• Technical data – trailer: Brand/Model: Gray Adams GAdd3T/4 Year of manufacture: 2007 – in service since 2008 Transport dimensions: 13.6 m (L) × 2.55 m (W) × 4.0 m (H) Unladen weight: 11,500 kg Payload: 25,410 kg Gross vehicle weight (GVW): 37,000 kg Ljdoxc Hzqspfx Akujrl Axles: 3 axles (including 1 steering axle) Suspension: air suspension Landing legs: JOST Tires: 385/65 R22.5 (approx. 60% tread) Brakes: disc brakes – components (S-cams) replaced in June 2021 Certification: CE Design and purpose: - Two-deck trailer – ideal for transporting larger quantities of animals - Full hydraulic system – safe and convenient operation - Remote-controlled hydraulic aluminum lift - Integrated water system – ensures optimal conditions for transported animals - Durable build and materials ensuring longevity Technical condition: - Trailer rarely used, maintained in very good condition - Regularly serviced – all maintenance performed promptly - Fresh inspection – fully roadworthy and ready for use =====••••===== Additional equipment: - Remote-controlled hydraulic lift - Integrated watering system - Complete documentation and CE certificates - High-quality components (JOST, pneumatic system, disc brakes) - Metallic paintwork =====••••===== Why choose this offer? - Top brand: Gray Adams – world leader in livestock trailer manufacturing - Durable and reliable construction – designed for intensive use - Recent inspection – guaranteed operational status - Very competitive pricing compared to a new unit (over 900,000 DKK!) - Ideal solution for livestock breeders, farmers, and transport companies

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements Lodpouxfu Nsfx Akuerl - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, mileage: 150,000 km, power: 375 kW (509.86 HP), first registration: 04/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MERCEDES-BENZ ACTROS 1851 | GIGASPACE | EDITION 2 | LEATHER | STANDALONE AIR CONDITIONING | STEERING ASSIST | 1 OWNER | FULL SERVICE HISTORY | 1 OF 400 EDITION | MASSAGE SEAT | ACC | ----VEHICLE HISTORY - Video available on request - German vehicle - 1 owner from new - All services carried out exclusively at Mercedes-Benz - Maintained under service contract VEHICLE EQUIPMENT - Automatic transmission - Cruise control - Active Drive Assist (distance control with steering assist) - Lane keeping assist - Blind spot assist - Active brake system - Hill start assist - Standalone air conditioning - Auxiliary heater - Air conditioning system - Leather seats - Business seat (passenger) - Comfort seats - Massage seats - Seat heating - Seat ventilation - Multifunction steering wheel - Refrigerator (2x XXL) - 2x bunks (XXL) - 2x aluminum tanks - Full paneling - Frame protection - Xenon headlights - Roof-mounted headlights - Additional lighting (roof, sides, underbody) - Side bars with lighting - Leaf spring suspension front - Air suspension rear - GigaSpace cab - Limited Edition (1 of 400) ADDITIONAL INFORMATION - Vehicle available immediately Lsdpfx Ajyxuumokuorl - Vehicle ready for immediate operation - Excellent condition EXPORT / NOTES Export sales only with deposit (minimum 500€ - 2,000€) For sales to EU and third countries, a deposit of at least 500.00 € / 1,000.00 € is required. Export declaration (EXW) possible within 10 minutes (authorized exporter). 5-day, 15-day, 30-day license plates as well as 15-day Austrian license plates available. Vehicle reservations only by using the email function. Verbal reservations are not valid. Subject to change, errors, and prior sale.

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min Ledpfx Akotlzdqeuerl -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg Lsdpfx Aoq Tvpxokujrl

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 Ljdpetnlz Ujfx Akuerl -Load capacity: 1500 kg -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Main stroke/fine stroke: 8.0/2.0 m/min -Lifting height: approx. 9.0 m -Drive unit: FU-A 11 43 22 -Travel speed: 20.0/5.0 m/min -Transport dimensions: 1120/1020/H380 mm -Weight: 226 kg

Condition: excellent (used), Mo = 14.0/18.5 Nm Io = 31.0/39.5 A Mn = 14.0 Nm Speed S 1 3000 n Ui = 150 VY 3 ~ 1 FU 1050-GF 13.5 mVmin Space requirement: 220 x 140 x 200 mm Ljdpfxod Atrxe Akujrl equipped with rotary encoder HEIDENHAIN

Condition: excellent (used), Ml Io = 10.4/12.8 A 60/100 k Lrsdpsd Atrrjfx Akuol Mn 4.0 Nm S1 3000/min Ui = 150 VY IEL 63 IM B5 / P64 I.CLF VDE 0530 PTC thermistor 3 ~ 1 x FU 1050-6HF 13.3 mVmin equipped with encoder HEIDENHAIN

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" Ledpodzw Hwofx Akusrl space requirement: 850 x 640 x 780 mm

Year of construction: 2006, condition: like new (used), Built in 2006 Condition like new! Ledpfxed Hr Nce Akuorl

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Year of manufacture: 2012 Model: 2 MVR 1 Feed rate: 35,000 l/h with whey Evaporation capacity: up to 25,000 kg/h Type: MVR evaporator with TVR finisher (High-)concentrator: from 20 up to 60% DS Including pasteurizer via steam injection MVR compressor: PILLER MVR compressor power: 456 kW Steam consumption finisher: ~900 kg/h Steam consumption pasteurizer: 900 - 1,700 kg/h Lsdpfjyvrwtjx Akusrl

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Lrodpfx Asywuihokujl Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg