Used Hydraulic Vice Rotatable for sale (20,083)

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ksdpfewva I Hex Aktedl Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Ksdpfx Akjvq Rtkjtodl Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Kdodperzfh Hsfx Aktel Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm Kdedpfx Aedzp Tcoktjl installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Various pistons / cylinders available. Cevoman bvba. Lenskensdijk 5 2200 Herentals Kdodpfxey R Nu Es Aktel Belgium

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, · Max. Tragkraft 6000 kg · höhe 29.90 m · Maximale seitliche Reichweite 25.90 m · Kippwinkel 12 ° Kodpjy S Eqfjfx Aktodl · Schüttwinkel 110 ° · Turret rotation (Max.) 360 ° · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FTT-6SMU1 · Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW · Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatic with Speedshift · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 9200 daN · Parkbremse Automatische negative Parkbremse · Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Hydrauliköl 300 l · Fassungsvermögen des Kraftstofftanks 320 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 67 dB · Außenschallpegel (LwA) 108 dB · Vibrationswert an Händen/Armen < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Kdodpodntc Nsfx Aktsl Startup type to be negotiated Description Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. Kdodpfx Aoy Sbu Hoktsl All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3599, total height: 2,600 mm, total length: 2,200 mm, total width: 2,200 mm, overall weight: 16,300 kg, pressing force: 100 t, passage height: 1,200 mm, passage width: 1,200 mm, Hydraulic press (previously used for lamination of door panels) Pressing area: 1300x1100 mm Press cylinders: 4x D110 mm Maximum pressing force: 1000 kN The machine is currently disassembled and was fully operational until it was taken apart. Kdedpfx Akowt Axcjtjl For an additional charge, two compatible heating plates including control cabinet are also available.

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Kodoy Siftjpfx Aktsdl

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Kodpfx Akew Eqdkotedl Mast type: Quattro Condition: New machine Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Kjdpew Eqdqjfx Aktodl Mast type: Quattro Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotatable Telehandler Mast Type: Telescopic Technical Condition: New Front Tires Type: Pneumatic Kjdpfxjw Eqdws Aktsdl Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Rear Tires Condition: 80 - 100% Description: The vehicle is UVV-tested. A&M pallet fork carrier set includes 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t load hook. 3rd valve, 4th valve, heating, STVZO (German Road Traffic Licensing Regulations), full cab, CE certificate, PEGASUS 60.30 St.V TÜV/Dekra approval, 20 km/h axles for construction machines with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED headlights on the rigid boom, 7-pin socket on the upper carriage, car radio pre-installation kit with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated front-wheel drive and electrical pre-installation for 3-motion equipment, wheel set with 18R22.5XF MICHELIN off-road tires, semi-automatic air conditioning, removable windshield protection for the cab, kit for driving with 180° upper carriage rotation, boom vibration damping, integrated rear view camera with 7-display (not compatible with 7-monitor with digital camera on the telescopic boom). Telematics kit (DTS) Road lights (front) with LED daytime running lights Cabin with laminated glass windscreen, pre-installation for saw Woodcracker Three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg Pallet fork carrier plate including load hook A&M, width 1, chain forks FEM4A, tines: 150x50, length 1.2 m, load capacity

Condition: good (used), Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator Kedoy R N Dyjpfx Aktjdl -Container rotating device: Welding rotating device -Drive motor: 0.75 kW with variable speed gearbox -Load capacity: kg -Roller spacing: 315 - 965 mm, rollers Ø 230 x 160 mm overall width -Rolling speed: 0.05 to 0.95 m/min Right/Left rotation -Control unit: with foot pedal -Individual components: see photos -Transport dimensions: 1140/730/H750 mm / 890/440/H750 mm / 700/600/H955 mm -Total weight: 714 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 315 to 965 mm -Rollers: 2 pieces on each side, Ø 250 x 140 mm -Load capacity: kg -Dimensions: 890/440/H800 mm -Submission/Price: complete Kedpfey R Nrqsx Aktedl -Transport dimensions: 890/880/H800 mm -Weight: 506 kg

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 11.205.6002, control type: PLC-controlled, working width: 6,100 mm, sheet thickness (max.): 10 mm, power: 45 kW (61.18 HP), overall weight: 40,000 kg, total length: 70,000 mm, total height: 3,500 mm, Equipment: emergency stop, type plate available, used Helmut Lotze hydraulic plate shear Price negotiable Kdjdoy Tixpepfx Aktsl

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, Kingsland COMPACT 45 Hydraulic Steel WorkeR LxWxH 1160 x 590 x 1410mm (+100mm lifting eye) Die Height From Floor 940mm Shear Support From Floor 940mm Angle Support from Floor 1140mm Notch Height from Floor 940mm Punching Capacity 22dia x 15mm Shearing Capacity 200x 15mm Angle Cutting 100 x 10mm Section Cutting 30mm Round, 25mm Square Nitching 8mm Thickness Punch Pressure 45T Standard Size Fitment Punch & Die 18mm *For Sale with Jet Machinery Ltd* Kdedpfx Aksxawbijtjl Jet Machinery Stock No: #78996 Machine Serial Number: 450 230 03 Cost: £5,750.00 + VAT

Condition: good (used), mileage: 171,823 km, power: 338 kW (459.55 HP), first registration: 11/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2023, Equipment: AdBlue, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, retarder, second fuel tank, spoiler, = Additional Options and Equipment = - Rear work lights Kjdpfx Akeyx Aw Ajtsdl - Front work lights - Heated mirrors - Windshield - Cabin - Tipping hydraulics - Auxiliary heater - Automatic pre-heating system - PTO (Power Take-Off) = Notes = Scania R460 Highline 4x2 - PTO/Hydraulic - Retarder - Night air conditioning - Twin tanks - Navigation MY: 13-11-2023 KM: 171823 YS2R4X20009332976 Hydraulic system 150-170-250 bar Parking cooler Smart 2 tachograph Fridge Retarder = Further Information = Technical Information Number of cylinders: 6 Transmission: I-shift, 12-speed, automatic Front axle: Tire size: 385/65R22.5; Max. axle load: 7500 kg; Steering; Left tire tread: 50%; Right tire tread: 50%; Suspension: leaf suspension Rear axle: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11500 kg; Left inner tire tread: 40%; Left outer tire tread: 40%; Right inner tire tread: 40%; Right outer tire tread: 40%; Suspension: air suspension Weights Unladen weight: 8,419 kg Payload: 10,581 kg Gross vehicle weight: 19,000 kg Condition Technical condition: good Visual condition: good Further Information Contact VAEX The Truck Traders for more information.

Condition: good (used), mileage: 680,015 km, power: 485 kW (659.42 HP), first registration: 06/2009, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, Year of construction: 2009, Equipment: AdBlue, central locking, = Additional options and equipment = - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Windscreen - Cab - Pre-heating system - PTO (Power Take-Off) = Remarks = Volvo FH16.660 Globetrotter 6x4 - PTO/Hydraulics - Hub reduction - Leather MY: 22-6-2009 KM: 680,015 YV2AUJ0D29A682779 PTO and hydraulics Hub reduction 3.20 m wheelbase Leather interior Etc. = Further information = Technical information Number of cylinders: 6 Engine displacement: 16,000 cc Gross vehicle weight: 30,000 kg Transmission Transmission: I-Shift, 12-speed, automatic Axle configuration Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steering axle; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: leaf springs Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 10,500 kg; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Reduction: outboard planetary axles; Suspension: air suspension Kdodpfx Ajy Rx Rpsktel Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 10,500 kg; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Reduction: outboard planetary axles; Suspension: air suspension Functional Body manufacturer: Volvo Condition Technical condition: good Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Condition: good (used), mileage: 934,288 km, power: 368 kW (500.34 HP), first registration: 04/2014, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 12,600 kg, Year of construction: 2014, Equipment: AdBlue, Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, navigation system, parking heater, power mirror, traction control, Technical information Number of cylinders: 6 Axle configuration Tyre size: 315/70R22.5 Brakes: disc brakes Front axle: Max. axle load: 7100 kg; Steering; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 12600 kg; Suspension: air suspension Weights Empty weight: 7.660 kg Carrying capacity: 11.340 kg GVW: 19.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Climate control - Differential Lock - Heated Mirrors - hydraulic - Hydraulic installation - PTO - Radio/Cd/Audio system - Radio/CD player - Sleeper cab - Speed limiter - Vehicle heater Kjdpoy Rukrefx Aktodl - Visor

Condition: new, Year of construction: 2026, 3050 mm 06,0 mm Kjdpfoy Sbkuex Aktedl 0,5-3,0 ° 1000 mm table height 770 mm work height max. 0 mm

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor Kodpfsvvrz Hjx Aktjdl -Manufacturer: TK, double hydraulic pump -Type: 22TK6/6S / 22 I 0004 -Shaft: conical Ø 15-17 mm -Flange: Ø 36 mm -Number: 3x pumps available -Price: per piece -Dimensions: 215/88/H110 mm -Weight: 5.8 kg/piece

Condition: good (used), Make: Ursviken Type: VPF 1000/800-5,0 Control: Siemens Simatic panel Year: 1970 Hydraulic press for fabrication off large componts like dish heads tanks boiler shipyard and steelconstruction Kdodpfekvmi Sex Aktol Renewed in 2015 with Siemens SIMATIC panel and E-Cabinet Rittal Build in height 2950 mm Maximum die height 1500 mm Movable Table & Piston in X-Ways Large package Die tooling radius 10/20/30/50/60/80/100 Pressing force 210 kg/cm2 Maximum stroke 800 mm Machine 2350 mm placed in ground Specifications Metric US Standard Capacity Kg 1000 Ton Distance between column 5010 mm Table Length 3000 mm Table Width 2000 mm Table Height 550 mm Ram stroke 1450 mm Approche speed 50 mm/min. Working speed 5 mm/min. Return speed 50 mm/min. Dimensions (Estimate) Length 0 mm Width 0 mm Height 0 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Kdjdpfowp Nv Hjx Aktjl Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Hight under roof: 1400mm Table Length: 1600mm Length: 3400mm Width: 3400mm Height: 3500mm Weight: 19000kg Kdedpfewyuqksx Aktsl