Used Indramat Dds 2.1-A200-D Digital A.c. Servo Controller for sale (75,352)

Condition: ready for operation (used), Indramat MAC090B-0-JD-2-C/110-A-1 Permanent Magnet Motor SN MAC090-93888, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Isdpfxslntwqo Adkotg

Condition: ready for operation (used), Indramat MDC 9.20B/MMA-0 DC servo motor SN: 1912R1,used, normal signs of wear, 100% functional, scope of delivery as per photos Isdpsugchyefx Adkjtg

Condition: ready for operation (used), Indramat MAC 090C-0-KD-4-C / 130-A-0 / WI522LV / S003 permanent three-phase servo motor + Stegmann DG 1604 2500 PULS / REV, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itedpfxei D Ih Rs Adkeg

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-A-1 permanent magnet three-phase servo motor, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos,ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ijdpfxji D Iivj Adkotg

Condition: ready for operation (used), Indramat MDD090C-N-030-N2L-110GA0 / 245764 servomotor SN: MDD090-06896, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Isdpfxoxtwafo Adkotg

Condition: ready for operation (used), Indramat MDC10.30D/SMA-0/WI444S06 DC servo motor SN: 7687,used, normal signs of wear, 100% functional, scope of delivery as per photos Itsdjuf H Hdjpfx Adkjg

Condition: ready for operation (used), Indramat MAC071A-0-ES-2-C/095-A-0// Permanent three-phase servo motor SN:12254, used, strong signs of use, 100% functional, scope of delivery as per photos Isdpfxevy N Sqo Adkstg

Condition: ready for operation (used), Indramat MAC112B-0-GD-2-C/130-B-0/S005 permanent magnet three-phase servo motor , serial no. according to photo , hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm ,used, minor signs of wear, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iedpfei D Ipxex Adketg

Condition: ready for operation (used), Indramat MAC63C-0-MS-1-C / 95-A-0 / J1000 permanent magnet three-phase servo motor SN: 17285, housing broken off from connector, function not affected ,used, normal signs of use, 100% functional, scope of delivery according to photos Iedpfx Asi D Irtjdketg

Condition: excellent (used), Indramat DDS02.2-W100-BE12-01-FW Digital AC Servo Controller Isdpfx Ajd Ndy Ujdkstg DDS02.2-W100 BE12-01-FW indramat Digital AC servo controller 100A Cooling method: air More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, functionality: unexamined, Ferwood Code: RU0002840 - Manufacturer Code: DDS03.1-W030-RS01-03-FW - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Isdpjv D H Ausfx Adketg

Condition: used, power capacity 38 Nm volt 0 V ampere 42 A weight of the machine ca. 59 Kg Itedpfsytg Tiox Adkjg

Condition: new, Rexroth Indramat RD500 RD500 Refu RD52.1-8C-160-W-M1-FW Drive serial no. as per photo ,unused, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Iodpfx Aji Ecyqsdkotg

Condition: ready for operation (used), Rexroth Indramat MKD090B-058-KG1-KN servo motor MNR: R911277398 SN: MKD090-56803, used, minor signs of wear, 100% functional, scope of delivery as per photos Iedpfxemahz Ro Adkotg

Condition: ready for operation (used), Fanuc A06B-6114-H210 Servo Amplifier Module Version: D SN:V02472360, used, normal signs of use, 100% functional, scope of delivery as per photos Iedpfx Aei D Uy Aodkjtg

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable Itedpjxpqy Dsfx Adkog - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: refurbished (used), machine/vehicle number: SC03, PJ.105.100F/0x Schneider Servo Controller for M10 Drive Motor of Suprasetter A52/A75 >2009 (GEN III) second-hand (refurbished) All offers are subject to prior sale Itsdpfxsy En Ute Adksg

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Itjdpjucwzaefx Adkjg Price between €300-1000 each. Over 40 motors and controllers available. A list of the items is available upon request. We would be happy to advise you!

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. Itodpoyx N Hqofx Adkeg The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: new, Manufacturer: Bosch Rexroth AG Type: HCS02.1E-W0028-A-03-NNNN Series: IndraDrive C Material number: 1012904612 Input voltage: 3 x AC 200–500 V Output voltage: 3 x AC 0–530 V Input current: 13 A Output current: 12 A Control voltage: DC 24 V Frequency: 50–60 Hz Output frequency: 0–1600 Hz Short-circuit withstand: 42000 A Ambient temperature: 40 °C Ijdpfjyxwqkex Adketg Condition: New in original packaging Quantity: 4

Condition: good (used), Servo drive, control unit, converter, frequency converter, frequency inverter, drive inverter, compact inverter, drive control unit, control unit -Manufacturer: Reis Robotics, servo controller, motor control unit -Type: Drive 4009 AT -Number: 2x servo controllers available -Price: per piece -Dimensions: 315/85/220 mm Itsdpfx Aoyu Hrzedksg -Weight: 3.6 kg/pc.

Condition: good (used), Servo drive, control unit, converter, frequency converter, frequency inverter, drive inverter, compact inverter, drive control unit, control unit -Manufacturer: Reis Robotics, servo controller, motor control unit -Type: Drive 4025 AT -Number: 2x servo controllers available -Price: per piece -Dimensions: 350/155/220 mm -Weight: 6.3 kg/pc. Ijdomch Uispfx Adkotg

Condition: used, 6-axis robot servo controller, drive, motion control, servo pack, servo unit Servo unit for YASNAC XRC UP6 YASKAWA / MOTOMAN type CACR-UP6AAC Itodpfxjwywi As Adksg O/N RA8616-0Y4A-46 S/N: D000Z2676590046 Version: 6-axis module for robot - Suitable for YASKAWA / MOTOMAN / YASNAC XRC UP6 - USB interface - Power supply type JUSP-RCP01AAC Dimensions (W x H x D): 270 x 310 x 200 mm Weight: 8.5 kg Used, in very good condition

Condition: used, Transistor pulse inverter for three-phase feed drives with analog control, servo controller SIEMENS type Simodrive 610 6SC6101-3A-Z Fab. No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 Itedpfx Adjh D Syvokeg The Simodrive 610 transistor pulse inverters have been developed to supply the 1FT5/1FS5 three-phase servo motors. The dynamic characteristics of these motors are to be used optimally. The pulse inverters can be used for a wide variety of tasks by equipping the power section accordingly. This flexibility is further increased by expansion modules for the power section. Supply voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in delivery) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 Number of feed axes: 4 Speed reference: +-10 volts Auxiliary voltage: 24 volts Relay contact for messages fault/ready for operation dimension WxHxD: 339 x 440 x 300 mm Weight: approx. 25 Kg The servo drive is still ready for operation in a Gildemeister GDM42. Further components from the Gildemeister you will find under stock numbers: 60343, 60347, 60348

Condition: used, DC main spindle drive, converter unit with digital control Simoreg V55 Spindle module, drive controller, rectifier, DC controller Manufacturer: SIEMENS Itjdpfx Ash D Syrjdkjg Type: SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0 Version: V55 basic unit Input voltage: 3 AC 380 V Input frequency: 50 / 60 Hz Input current: 49 A Output voltage: 380 VDC Output current: 60 A Rated power: 22 kW Dimensions (W x H x D): 270 x 260 x 290 mm Weight: approx. 25 kg The drive controller is still operational in a Gildemeister GDM42. The matching drive motor can be found under stock number 60347. Further components from the Gildemeister can be found under stock numbers: 60346, 60347, 60348