Used Indramat Indramat Azionamenti Dkc01 3-040-7-Fw for sale (77,273)

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Kedpfx Akoyr Txpswjdt Rotor width: 1200 mm Rotor knives: 7 rows Stator knives: 3 rows Inlet cross-section approx. 1200 x 800 mm Drive motor: as per customer request

Condition: good (used), Year of construction: 2007, Eckold tool ECKOLD - FWR1307X Stretching tool for MAX. 6 mm MACH-ID 3811 Kedpjzdgb Ijfx Akwsdt Make: ECKOLD Type: FWR1307X Stretching tool for MAX. 6 mm Year: 2007 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 power supply, serial number SN23226473930903, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photo. Kdodpsi Ebi Aefx Akwot

Condition: ready for operation (used), Indramat KDA 3.2-150-3-A0S-W1 main spindle drive SN:230900-747249-025, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please request the price separately. Kjdotqa Uropfx Akwjdt

Condition: new, Rexroth Indramat CSH01.1C-S3-EN1-NNN-NNN-S2-S-NN-FW Indra-Drive controller, part number: R911329672, serial number as shown in the photo, unused, 100% functional, scope of delivery as shown in the photos. Kdjdpfx Aji Ecyujkwst

Condition: excellent (used), Year of construction: 2016, Eckold tool ECKOLD - FWR 1307 X MACH-ID 7787 Make: ECKOLD Type: FWR 1307 X Year: 2016 Diameter 130 mm Weight 18,5 Kg Steel 400 N/mm2 = 6,0 mm Kdjdozcxz Dopfx Akwot Inox  ;600 N/mm2 = 4,0 mm Alu 250 N/mm2 = 7,0 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Indramat MAC071B-0-TS-3-C / 095-B-2 Permanent Magnet Motor, Serial No.: MAC071-62033, encoder connection cable missing, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Kodpfxji D Ik Ee Akwjdt

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Kedpozzahzjfx Akwsdt Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Kdedpfx Ajyr N Erskwot Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 728 kg, We are offering this GF WorkPartner 3 pallet changer, year of manufacture 2022, in very good condition. Product: GF WorkPartner 3 (WPC III dec), year 2022 Type: Automatic pallet changer / automation system Weight: 728 kg Application: Unmanned manufacturing (EDM & milling) Compatibility: GF machines (FORM, CUT, Mikron MILL – depending on interface) Condition: Currently still in operation, being replaced by a WorkPartner with more pallet slots Kodpfxjy Igyte Akwsdt Availability: From June 2026 Pallets not included Images: See attachment Number of positions: 7 If you have any questions or require more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2012, operating hours: 69,990 h, clamping force: 320 kN, displacement volume: 154,314 cm³, injection pressure: 25,001,280 bar, overall weight: 14,500 kg, screw conveyor diameter: 3,550 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Kdedpfxsxl Hi To Akwot

Condition: used, Indramat TRK 6-4U-380/60-G0 TSS10/633 Kdedpfx Asz Dbzljkwst

Condition: good (used), Year of construction: 2004, Built in 2004 Configuration: Left-hand delivery Equipped with: Left-hand delivery Mosca strapping unit Applications: Offset and gravure signatures Kedezub Uvepfx Akwodt Mechanical Infeed Speed: Maximum 1.0 m/s Cycle Time: Minimum 32 s/log Signature Sizes: Minimum: 200 × 110 mm (7 7/8" × 4 3/8") Maximum: 480 × 320 mm (18 7/8" × 12 5/8") Page Count: Depending on paper quality and basis weight Minimum: 4 pages Maximum: 144 pages Compressed Log Length: Standard machine: 800 to 1,200 mm (31 1/2" to 47 1/4") With special insert (optional): 500 to 860 mm (19 3/4" to 33 7/8") Strapping System: Mosca Strapping Material: 12 mm (15/32") wide PP or PET strap Endboard Hopper Capacity: Maximum 100 endboards with 10 mm (3/8") thickness Endboard Thickness: Minimum: 5 mm (3/16") Maximum: 13 mm (1/2") Endboard Insertion: Automatic Shingle Spacing: Minimum 30 mm (1 1/8") Shingle Side Variation: Maximum ±15 mm (5/8") Power Consumption: Approx. 4.5 kW (with manual crane) Approx. 4.0 kW (without manual crane) Air Consumption: 5 Nm³/h at 6 bar (3 cfm at 90 psi) Machine Weight: 4,100 kg (9,000 lb)

Year of construction: 1987, condition: ready for operation (used), Three old Hermle and Deckel milling machines are available. 1) Horizontal milling machine Hermle FW 801, tool holder: SK40, travel X/Y/Z: 430mm/150mm/420mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2250mm/1700mm/1500mm, weight: approx. 1000kg. 2) Universal milling machine Hermle FW 710, tool holder: SK30, table dimensions X/Y: 710mm/190mm, travel X/Y/Z: 400mm/150mm/350mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 700kg. 3) Deckel FP 2, year of manufacture: 1987, tool holder: SK40, travel X/Y/Z: 300mm/2200mm/400mm, table dimensions X/Y: 620mm/390mm, max. table load: 250kg, speed: 3150rpm, feed: 3600mm/min, rapid traverse: 4000mm/min, machine dimensions X/Y/Z: approx. 2500mm/2100mm/1800mm, weight: approx. 1250kg, control: Heidenhain TNC 355. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Kdedpfxsy I Adhs Akwst

Year of construction: 1999, condition: good (used), Specification: Adjustable bed Kdjdpfx Ashy N Uhskwet 2 foil pulls Variable Accel / Decel and delay pull pulse – to provide accurate foil pull and prevent preheating of foil. Foil Countdown in metres – this system will provide a warning that a foil change is required and is controlled via the touchscreen. Electronic front and sidelay sensors Auto impression Preloader Machine has been completely built by Starfoil. Condition as is.

Condition: ready for operation (used), Rexroth MDD071B-N-040-N2S-095GR1 3-phase synchronous PM motor, part number: R911266334, serial number: SNMDD071-17401. The motor has been completely overhauled by the manufacturer, it is used, in good condition, and 100% functional. Scope of delivery as shown in the photos. Kdsdpfx Akelfiriswot

Condition: new, Indramat DDS02.1-W015-D controller, serial number: 263496-48917, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Ksdpfxsi Ebf He Akwsdt

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 controller, serial number: 5765, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. Kedpfx Akoi Ebhpjwsdt

Condition: ready for operation (used), Indramat TDM 1.2-030-W1 A.C. servo controller, serial number 236232-783066-093, has been professionally and completely refurbished and tested and comes with a 12-month warranty. It is 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately. Kedpfx Asi Ebm Ajkwjdt

Condition: ready for operation (used), Indramat TDM 1.2-30-300W0 servo controller, serial number 236232-777278-083, professionally and completely overhauled and tested, with a 12-month warranty. Fully functional. Scope of delivery as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately. Ksdpfxji Ebn Is Akwsdt

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min Kjdpfx Akezizabewsdt • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Length: 2800mm Width: 2400mm Height: 2100mm Kodpowq Ndgsfx Akwjdt Weight: 2000kg

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: CC41011401EJ, working width: 2,000 mm, cutting width (max.): 2,000 mm, cutting height (max.): 70 mm, Investronica CV040/070 automatic multi-ply cutting system, built February 2003 in Madrid. In working order. TECHNICAL DATA Manufacturer: Investronica Sistemas, Madrid (Spain) Model: CV040/070 Identification: LOOCC4.100V000.B0 Serial number: CC41011401EJ Kdodpsz Atvusfx Akwet Date of manufacture: February 2003 Useful cutting width: 2,000 mm Cutting height: 70 mm compressed fabric Cutting window: 2,200 mm, continuous length with conveyor belt Vacuum system: high-efficiency vacuum generation, integrated module Feed: automatic advance system Sharpening: automatic blade sharpener on the cutting head Blade speed: variable control Table: evacuation table with conveyor belt Approximate weight: 3,000 - 4,000 kg, to be confirmed on dismantling EQUIPMENT INCLUDED 1. Investronica CV040/070 automatic cutting table with cutting head, blade sharpener, integrated vacuum module and evacuation table with conveyor belt. 2. Control station built into the machine, with monitor, keyboard and computer. 3. Investronica P2000 pattern plotter. The machine is installed and running in Seville. It can be seen and tested in operation by appointment. Machine owned by the seller, free of encumbrances.

Condition: new, Indramat KDV 2.2-100-220 / 300-W1 power supply, serial number: 234691-00754 A08R1, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Kdedoi Ebi Ropfx Akwst

Condition: used, power capacity 19,5 Nm volt 600 V ampere 45 A Kdjdsvtr Smepfx Akwot weight of the machine ca. 22 kg