Used Ips Pc-2500-Scbp for sale (10,559)

Condition: used, Year of construction: 2005, operating hours: 41,059 h, machine/vehicle number: 12831, with 30 tool changers, spindle speed: 5,000 rpm, travel paths: X/Y/Z: 2,500/1,000/770 mm, control: HEIDENHAIN iTNC530, 1 chip conveyor, 1 coolant/lubricant filtration system, operator display, magnetic clamping plate approx. 2,000x800 mm, 2-piece, weight: 21,000 kg, without machining tools, according to information: inverter for Z-axis out of order. Operating fluids are included in the auction lot and must be taken by the buyer or disposed of properly. Codpfjyztgtsx Ad Aegt

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Codpfx Aeya Iaqjd Aegt Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 4 mm, table height: 740 mm, input voltage: 400 V, type of input current: three-phase, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, foot remote control, type plate available, HYDRAULIC GUILLOTINE SHEAR 4×2500 + LASER 4 × 2500 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 4 mm Maximum cutting length: 2500 mm Blade rake angle: 1° 30′ Number of strokes per minute: 20 Back gauge travel: 600 mm (standard) Distance between side frames: 2650 mm Blade length: 2550 mm Table height: 740 mm Motor power: 5.5 kW Weight: 3800 kg Machine dimensions (L × W × H): 3130 × 2030 × 1600 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Cgodsyt E Aiopfx Ad Aet Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line (laser guide) Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English language) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 2013, Price: On request Codewz Nxxepfx Ad Asgt - Year: 2013 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotor width [mm]: 2500 - Number of shafts [pcs.]: 1 - Opening width [mm]: 3000 - Opening length [mm]: 1400 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 05/2021, loading space length: 13,610 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, total length: 13,980 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,770 mm, color: white, Year of construction: 2021, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Cgsdpfx Ajyyu A Hsd Aet Weights Empty weight: 8.500 kg Carrying capacity: 21.500 kg GVW: 30.000 kg Functional Tail lift: Dhollandia DHLMR.30, tail lift, 2500 kg Make of bodywork: Kassbohrer Plywood Box Maintenance, history and condition Number of owners: 2 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), Year of construction: 2017, operating hours: 8,800 h, functionality: fully functional, machine/vehicle number: NL2561708843, number of spindles: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities: Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length max. (mm): 705 Turning diameter max. (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Bar working capacity (mm): 80 Tool Magazine: Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5 / 4.9 / 4.2 (3 min / 5 min / continuous) Rapid traverse (m/min): 30 Main Spindle: Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5 / 18.5 / 15 (25% duty cycle / 50% duty cycle / continuous) Max. torque (Nm): 49 Sub-Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11 / 7.5 (25% duty cycle / continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System: Tank capacity (liters): 366 Equipment: Chip conveyor Signal tower Machine operating hours: Power on hours: 19,393 Cutting time: 8,800 Rated power requirement (kVA): 48 Basic machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Cgedpfx Adjyzxcgo Aot The depicted tools, driven tools, and both chucks are not included in the scope of delivery.

Condition: new, DEMAG brake ring / brake lining / cone brake lining – 50 pieces (new). 1. Type: KB 160 – 4 pcs. 2. Type: KB 100 – 2 pcs. 3. Type: KB 200 – 2 pcs. 4. Type: KB 140 – 2 pcs. 5. Type: KB 125 – 5 pcs. 6. Type: KB 112 – 1 pc. 7. Type: KB 90 – 2 pcs. 8. Type: KB 80 – 11 pcs. 9. Type: No. 405 – 1 pc. 10. Type: No. 616 654 – 5 pcs. 11. Type: No. 620 606 – 7 pcs. 12. Type: No. 612 648 44 – 6 pcs. 13. Type: No. 628 626 44 – 2 pcs. Csdpfsyy Taksx Ad Ajgt DEMAG brake hood / brake cover – 38 pieces. Various sizes (new / used).

Condition: used, Year of construction: 1996, - Brand : Omme - Type: 2500 EBDZ - Year built: 1996 Cgodpfxeyy Dmbo Ad Aot - Weight: 2880 kg. - Hours: 587 hours - Drive: Kubota diesel + Battery + 220 volt - Working height: 25 meters - Lateral reach: 12.7 meters - Wheel Drive / Movers - Extra nose wheel - Stamp plates 4x - Drive plates 4 x - Dutch license plate - second owner - Safety inspection possible - Aerial work platform book available - Maintenance history dealer present - CE document available - Trade-in and transport possible - Video on our website * Brand: around *Type: 2500 EBDZ * Construction year: 1996 * Weight: 2880 kg. * Lateral reach: 12.7 meters * Working height: 25 meters * Hours: 587 uur

Condition: used, Year of construction: 2022, operating hours: 700 h, Lightly used and well-maintained Komatsu PC 20 R-5 mini excavator Technical data: * Operating weight incl. attachments approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length: 3,845 mm * Overall height: 2,370 mm * Overall width (minimum): 1,280 mm (990 mm) Cgjdpfx Adjrwvvys Aet * Track width: 230 mm * Tail swing radius: 1,120 mm * Track length: 1,570 mm * Max. digging reach: 4,100 mm * Max. digging depth: 2,370 mm * Minimum swing radius: 1,515 mm Equipment included: * 2 travel speeds with auto shift-down * Servo control * Long dipper arm * 2-way auxiliary hydraulics to the boom (switchable for hammer operation) * Protective cover on the boom lift cylinder * Work light on the boom * Dozer blade * Travel alarm (acoustic) * Tool kit * CE conformity * Cab with heater * 1x standard hydraulic circuit (with pedal) * Suspension driver's seat with fixed 2-point safety belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other: * Attachments are NOT included - sale on request

Condition: new, functionality: fully functional, machine/vehicle number: diverse, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fork length: 1,150 mm, empty load weight: 120 kg, total length: 1,622 mm, drive type: Lithium-Ionen, construction width: 685 mm, Low-lift pallet truck Chassis number: Various Load centre distance: 600 mm Fork width: 160 mm Fork thickness: 58 mm Condition: New machine Technical condition: New Front tyres type: Polyurethane Front tyres size: 140 x 55 mm Front tyres condition: New Rear tyres type: Polyurethane Rear tyres size: 80 x 93 mm Rear tyres condition: New Battery voltage: 48V Battery capacity: 10Ah Battery manufacturer: Hyster Battery type: Lithium-ion Battery year: 2026 Battery condition: New Description: Compact and lightweight design, lateral load support rollers, electric drive, electric lifting and lowering, key-operated controls, travel possible with tiller in vertical position for maximum efficiency in confined areas, emergency direction-reverse switch, ergonomic multifunction tiller with LCD display for maximum operating hours, hour meter, and onboard diagnostics. Cgedeyng Ezspfx Ad Aet

Condition: excellent (used), Condition: used, shows normal signs of use, fully operational Manufacturer: Vetter (Germany) Country of manufacture: Germany 📦 The set includes: 2x Vetter air lifting bag Type 1/6 complete set of air hoses (yellow + red) quick couplings carrying bag the set exactly as shown in the photos ⚙️ Technical specifications: Model: Type 1/6 Maximum lifting capacity: approx. 3.2 t (32 kN) – each bag Max. operating pressure: 0.5 bar Volume: approx. 403 L Air requirement: approx. 603 L Hoses: DN 19 mm working pressure 1 bar (14.5 PSI) ISO standard 🛠️ Applications: technical rescue (fire department) lifting of vehicles and machinery workshops and industry Csdpfxjy Af Tno Ad Ajgt maintenance and emergency operations 📌 Additional information: renowned German manufacturer – Vetter complete set, ready for immediate operation solid, durable construction fast and safe lifting of heavy elements sold as shown in the photos

Year of construction: 2004, condition: used, 2 PCs. PC controlled tool issue cabinets, which are networked to each other! Spiral Edition: 126. spiral places maximum 63 / Cabinet 2520 PCs. product capacity max. 1260 PCs. / Cabinet Electrical connection 230 V / 50 Hz, 16 A Dimensions L x W x H 990 x 980 x 1830 mm / Cabinet Weight approx. 475 kg / unit Accessories / special features: Ideal storage system for non-sensitive products by compact dimensions. Prerequisite is a compact, stable packaging of the individual parts. These parts fall into a padded extraction shaft. -Operation via large touchscreen -Handheld scanner -Documentation New price: 21,000.00 EUR NET Cjdpfx Adsdt El He Asgt Siegfried Volz machine tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: new, Year of construction: 2026, OSTERBERGER KSBP 2500 Universal Brand new combined universal long-belt sander - brushing machine - polishing machine in portal construction. Sanding length and width can be customized according to customer requirements, also available with two sanding belts in parallel for two workstations, allowing for pre-sanding and finishing without changing the belt, as well as a brush and polishing head with automatic longitudinal adjustment to the left and right. The machine is suitable for coarse and fine sanding, structuring (brushing), polishing, and high-gloss polishing of a wide variety of surfaces including painted workpieces, natural workpieces, and various metal sheets made of stainless steel, aluminum, brass, copper, bronze, and various plastics. Combined long-belt sanding machine with brushing and polishing unit for workpieces up to 650 mm in height: Cjdpey Afu Ejfx Ad Asgt - Motorized movement of the brushing and polishing unit from left to right and back - Manual movement of the support table forwards and backwards - Motorized adjustment of the support table up and down Worktable size: 2,500 x 1,000 mm (other sizes available upon request) Sanding belt dimensions: 8,200 mm x 150 mm Drive power of brushing and polishing unit: 3 kW Drive power of sanding belt unit: 3 kW Dimensions approx. 4,200 x 1,600 x H 2,100 mm Weight approx. 1,000 kg

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Japanese-built 4-axis CNC lathe for finishing operations, equipped with C-axis, Y-axis, and driven tools, installed in 2002, compliant with CE standards, and refurbished! Main features: Turning diameter: 755 mm Machinable diameter: 390 mm Machinable length: 655 mm 12-station turret with driven tools Y-axis travel: +/- 60 mm C-axis Spindle nose: A2-8 Kitagawa B-210 (250 mm) Spindle speed: 3,500 rpm Spindle motor: 18.5 kW Driven tool motors: 5.5 kW Driven tool speed: 4,000 rpm Bar capacity: 73 mm Tailstock: MT5 Rapid traverse speeds: 18 m/min (X-axis), 24 m/min (Z-axis) Weight: 5,800 kg Comes complete with: - Hydraulic tailstock - Prismatic guideways - Chip conveyor Cedpfx Aoxf Iygjd Asgt - Headstock oil cooler - Double foot pedal for opening/closing the main chuck and tailstock - Set of fixed tool holders - Set of driven tool holders - Complete set of manuals - CE certificate

Condition: excellent (used), Year of construction: 1999, control type: NC control, controller manufacturer: UNIOP, working width: 2,520 mm, HM bending machine Model KSM 5 / 2500 Csdpsyx Epbefx Ad Aegt Year : 1999 Capacity : 2520 x 5 mm. INIOP NC control (Swiss made) Manual back gauge

Condition: good (used), axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 11/2015, loading space length: 10,510 mm, loading space width: 2,460 mm, loading space height: 2,620 mm, total length: 10,790 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,050 mm, color: red, Year of construction: 2015, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: SAF Disk Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 6.870 kg Carrying capacity: 18.130 kg GVW: 25.000 kg Functional Tail lift: Dhollandia DHLM.30, tail lift, 2500 kg Cgjdpfx Ajyx Sz Ded Ast Make of bodywork: Groenewegen / Jumbo Plywood Box Maintenance, history and condition Number of owners: 2 APK (MOT): tested until 11/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: like new (used), Article description: 22 pcs. unused hydraulic motors M+S Hydraulic MT/B 315C/4 Cjdpsyyyadjfx Ad Aegt ----- Item condition: Unused stock item. Storage marks possible. Internal number: 26.310

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MRG 2500 4G, total width: 1,980 mm, total length: 5,000 mm, total height: 4,700 mm, operating temperature: 95 °C, AHENA 3 MW-os Aprítékos Acél Kazán Eladó egy teljesen új AHENA 3 MW teljesítményű acél kazán , amely négy füstjáratos rendszerrel, vízszintes füstcsövekkel és mozgó rácsos automatikus betáplálással rendelkezik. Ideális szilárd tüzelőanyagok, például fakéreg, faapríték és faforgács felhasználására. Cgjdpfxeua D Twe Ad Aot Ez a kazán kiváló választás nagy hatékonyságú és környezetbarát működéshez. Magyarországon, Cegléden található.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Lisec IG line 4000 x 2500 mm (1990/2001), left/right: - RTV-27/25, extension inlet conveyor washing machine, year 1990 - RTV-38/25WE, inlet conveyor washing machine with glass thickness measurement and automatic low-e detection, year 1990 Cgedpfsyztaysx Ad Ajt - VHW-25V8, washing machine with 8 brushes for low-e, including 2 sand filters, 2 hot water tanks and blower, year 1990 - RTVN-32/25ST, outlet conveyor of washing machine, year 2001 - RSVN-38/25A, frame set section, year 2001 - RTVN-15/25MZ, measuring zone for gas filling press, year 2001 - RTVN-11/25ST, inlet conveyor of gas filling press (or extension for measuring zone), year 2001 - FPS-36/25U2T, gas filling press for argon, year 2001 - RTVN-16/25ST, outlet conveyor 1 of gas filling press, year 2001 - RTVN-16/25ST, outlet conveyor 2 of gas filling press, year 2001 - APKV-25/2, 2-track cork applicator, year 2001 - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, year 2001 - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001 Availability now from our stock in Hofkirchen/Austria

Condition: used, Year of construction: 2010, Schroder manual folding machine. The machine is very robust, fully operational, and the blades are in good condition. Testing is possible. Completely repainted in original colors. Codpfoymnhbjx Ad Aogt Specification: Manufacturer: Schroder Model: Ak 2500/1.0 Year of manufacture: 2010 Working length: 2500 mm Bending thickness: 1.0 mm Other: Repainted. Pneumatic clamping. No back gauge. If you have further questions, we will be happy to assist you.

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. Cjdpoyx U N Djfx Ad Asgt - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Please contact us for further information. Price on request!

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm Csdpfx Adjvwgmms Aogt weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

Condition: good (used), power: 11 kW (14.96 HP), fuel type: diesel, Year of construction: 2018, operating hours: 2,031 h, Drivetrain Drive: Track Make of engine: Komatsu Weights Empty weight: 1.770 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: N345 Other information Remanufactured: Yes Transport dimensions (LxWxH): (L/B/H) ca.: 3,52m / 1,00 m / 2,32m Additional information Please contact Tobias Mayr for more information = Additional options and accessories = Cgedpfoynrltox Ad Ast - V ditch bucket

Year of construction: 2018, condition: excellent (used), Used Fagor 2500ton hydraulic h frame press for sale FAGOR H4-2500-5000-3000 2500 ton YOM: 2018 Moving Bolster Table Size: 5000 x 2500 mm Die Cushion in Table: 600 to stroke: 400 mm Die Cushion in Ram: 350 to stroke: 200 mm Manufacturer: Model: Controls: PLC SIEMENS Simatic TouchControl Manufact. year: 2018 Cgedpfx Adsifklds Aet Press Design frame design H-frame Openings in uprights yes Moving bolster yes Press forces Total force (nominal) 2500 to Press Table Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Table height over floor 820 mm Ram Clamping surface (left-right) 5000 mm Clamping surface (front-back) 3000 mm Stroke 1800 mm Ram (hydraulic press) Number of main-cylinders 4 Approximation velocity max. 490 mm/s Working velocity max. 17 mm/s Return velocity max. 250 mm/s Cushion in ram Force of cushion 350 to Stroke 200 mm Clamping surface (left-right) 4300 mm clamping surface (front-back) 2500 mm working principle hydraulical regulated yes page 2 of 2, Stock No.: 7-46523 Die Cushion (table cushion) force of cushion 600 to stroke 400 mm clamping surface (left-right) 4320 mm clamping surface (front-back) 2700 mm working principle hydraulical regulated yes Tool Assembly Dimensions Distance between columns (H-frame) 5050 mm Tool Assembly Dimensions Distance table – ram max. 2700 mm Electrical specifications Total power consumption 565 kW Mains voltage 400 V Mains frequency 50 Hz Dimensions / weights Height above floor level 10750 mm total weight approx. 500000 kg Light barrier yes Hydraulic overload protection yes This FAGOR machine was manufactured in 2018 and commissioned in 2019 and was only used sporadically after that. The condition can be described as new. Description of condition – Hydraulic press equipped with: – front moving bolster, – draw cushion in the table – cushion inside the ram, – 16 hydraulic tool clamping units, – two hydraulic cylinders for ” out of center pressure ” compensation – Siemens HMI touch control, – ideal for tryout of tools. – max. rapid speed of ram 490 mm/sec – ram and table deflection accuracy 0,125 mm/m.

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm Cedpfx Asyx Inaed Ajgt ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation