Used Jotes Swb-25 for sale (14,750)

Condition: used, functionality: fully functional, machine/vehicle number: 515065G00537, Year of construction: 2012, operating hours: 5,350 h, load capacity: 2,500 kg, lifting height: 5,020 mm, free lift: 1,770 mm, fuel type: electric, mast type: triplex, construction height: 2,280 mm, fork carriage width: 980 mm, fork length: 1,200 mm, empty load weight: 4,940 kg, total length: 2,270 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Chassis number: 515065G00537 Load center: 500 Fork width: 100 mm Fork thickness: 40 mm Kodsy Scrajpfx Aarjlt ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 225/75-10 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 180/70-8 Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Battery year of manufacture: 2017 Battery condition: 40 - 60% Side shifter, 3rd valve, front work light, heater, full cabin.

Condition: used, Year of construction: 1996, Overview  This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details  Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations  Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water Lye concentration measurement and dosing control, also for post-caustic pH value measurement for hot water 1 Soaking & rinsing system: Double pre-soak with sieve belt Lye volume: 30 m³ Caustic solution, hot water 1, hot water 2, cold water and fresh water Head section can be steamed and rinsed with disinfection H₂ suction Klodpfxevxtavj Aarjt

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 25 mm -Dimensions: see photo technical drawing -Overall dimensions: 100/75/H65 mm Kjdpfx Aaoy R Srmjrolt -Total weight: 2.3 kg

Year of construction: 2024, condition: new, Länge/Breite/Höhe: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Passage between stands: 1700 mm stroke: 265mm Installation height: 530 mm Projection: 410 mm table height: 900 mm table width: 104 mm Y Fast speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. bottom tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motor-driven crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guide along the entire line Kedpsfgz U Ssfx Aarslt Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 6,118 h, load capacity: 2,500 kg, lifting height: 7,780 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: good Front tires Type: Superelastic Front tires Condition: 20 - 40% Rear tires Type: Superelastic Rear tires Condition: 20 - 40% Kljdpeu D Rkajfx Aaret Sideshift, 3rd valve, rear working lights, front working lights,

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 1,300 kg, lifting height: 4,200 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, drive type: Elektro, Electric high lift stacker Load centre: 600 mm Mast type: Triplex Condition: New machine Technical condition: New Battery voltage: 26V Kjdpfx Aeylqqioarjlt Battery type: Lithium-ion Battery year of manufacture: 2025 Battery condition: 80 - 100%

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Klodpfxjyi A Tdj Aaret Storage location: Nattheim

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Kodpfsx Twdyex Aarelt

Condition: excellent (used), mileage: 30,191 km, color: white, lifting height: 30,000 mm, Year of construction: 2006, operating hours: 1,136 h, Drivetrain Drive: Wheel Weights Empty weight: 7.450 kg Functional Lifting capacity: 1.300 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 350 kg Delivery terms: EXW Transport dimensions (LxWxH): 8,6x2,3x3,2 Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Kodjyi Hdgopfx Aarjlt Klaas K 25-30 TS * 2006 * Diesel drive * 1136 working hours * Equipped with a man basket * Refurbished remote control * 30-meter working height * 25-meter horizontal reach * 1300 kg lifting capacity * 30,191 km * 7,450 kg net weight

Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, Manufacturer: SORALUCE Type: TL-25 Control: HeidenHain TNC 430 Year of manufacture: 1998 Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package Specifications Metric US Standard X-axis 2500 mm Y-axis 1000 mm Z-axis 1600 mm Table length 2860 mm Table width 1000 mm Table load 7500 Spindle power 25 kW Spindle speed 0 - 3000 rpm Tool holder 50 ISO/Bt/Mk X-axis feed 10000 mm/min. Y-axis feed 10000 mm/min. Z-axis feed 10000 mm/min. Milling head auto index 2.5 x 2.5° Working hours 12500 H Dimensions (estimate) Length 6000 mm Klodpfx Aaov Idalorot Width 3500 mm Height 3500 mm Weight 15000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation Ksdpfx Aorr Ui Rsarolt 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: used, Year of construction: 1994, operating hours: 6,852 h, Type of fuel: Diesel Colour: Grey Empty weight: 3.920 kg Dimensions (LxBxH): 263 x 115 x 254 cm Lifting capacity: 2.500 kg Lift height: 400 cm Fork dimensions: 90 x 1.000 mm - Year: 1994 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6BN10101 - Operating hours: 6852 - Lifting capacity: 2500kg - Lifting height: 4000mm - Overhead clearance: 2540mm - Free lift: 0mm - Fork length: 90mm - Maximum fork width: 1000mm - Minimum fork width: 210mm Kjdpfjyr D Easx Aarslt - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Half cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: Mitsubishi - Transport dimensions: 2630mm x 1150mm x 2540mm (l x w x h) - Transport weight [kg]: 3920kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: excellent (used), Year of construction: 1992, Tilting spindle moulder with sliding table Manufacturer: Martin Model: T25 Year of manufacture: 1992 Kjdpfx Ajy Ahpljarjlt Tilting range: -5° to +45° Height and angle adjustment: Electric Spindle diameter: 30 mm Power: 5/6 kW Spindle speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm Reversible spindle direction: Yes Motor brake: Yes Right-side table extension with pull-out stop Left-side table extension with sliding table Sliding table for slotting operations Slotting guard Haffner feed unit with 3 rollers – stepless adjustable Weight: Approx. 1,500 kg Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 1,600 mm, total width: 1,400 mm, total height: 3,350 mm, input voltage: 400 V, overall weight: 750 kg, type of input current: three-phase, Lisec 2-lane cork application machine APKV-25/2, year 2001, working direction left/right, good working order The machine can be seen in our warehouse in Hofkirchen/Austria on appointment Kodsy Tl Tcjpfx Aarolt

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 8109/30, Drilling and Dowel Inserting Machine with PLC + Part Return | 8 heads For sale: a professional through-feed drilling and dowel inserting machine for the production of furniture components, particularly drawer sides. The machine is equipped with PLC control, automatic part return, and an expanded head arrangement (including rear heads), enabling the complete operation to be performed in a single pass—without re-feeding the workpiece. Technical Specifications: - Number of heads/motors: 8 - Head configuration: front/side/rear (double-sided machining in a single cycle) Klsdoyzg Udepfx Aaret - Control: PLC - Part return: yes (closed production loop) - Maximum working width: 2000 mm - Power supply: 400 V - Pneumatics: yes - Year of manufacture: 1981 - Manufacturer: Gerhard Koch (Germany) - Condition: operational, in ongoing serial production Performance: Approx. 6,000 drawer sides per 8-hour shift Thanks to the rear heads, components that typically require two passes are processed in one, significantly reducing cycle times and increasing productivity. Applications: - Drawer sides - Cabinet components - Batch and repeat production - Automated production lines Key advantages: - Single pass processing instead of two - High repeatability - Stable, heavy-duty construction - Perfect for mass production - Proven German technology Location: Elbląg Please contact me for further information.

Condition: ready for operation (used), Year of construction: 2001, spindle motor power: 15,000 W, spindle speed (max.): 3,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 250 mm, overall weight: 10,800 kg, number of axes: 8, This 8-axis Muratec MT 25 MY was manufactured in 2001. It features a maximum machining diameter of 370 mm and a maximum machining length of 920 mm. The machine is equipped with twin spindles and twin turrets, offering 15 live tooling stations per turret. If you are looking to get high-quality turning capabilities, consider the Muratec MT 25 MY turn-mill centre we have for sale. Contact us for further details. • Configuration: Twin spindle / twin turret / twin Y-axis (9 controlled axes) • Control unit: Fanuc CNC (motors, servos, electronics) • Condition: Currently in operation; immediate delivery • Travels: • X1: 230 mm • X2: 230 mm • Z1: 250 mm • Z2: 700 mm • Y: 100 mm (±50 mm) • Z3 (sub-spindle): 750 mm • Capacity & envelope: • Max machining diameter: 370 mm • Max machining length: 920 mm • Bar capacity: 67 mm • Rapid traverse (X/Z): 20 / 25 m/min • Spindles (twin, identical): • Spindle nose: A2-6 • Torque: 420 N·m • Workpiece transfer: Automatic transfer between spindles with torque control Kedsy Shwhepfx Aarjlt • Turrets & tooling capability: • Turrets: 2 (both with Y-axis & C-axis) • Stations: 15 per turret (all live/driven) • Live tooling speed: 3,000 rpm • Live tooling motor: 4 kW • Indexing time: 0.2 s • Build & features: • Guideways: Solid box ways (prismatic) on all axes • Cleaning: Automatic air/coolant blast for sub-spindle cleaning • Monitoring: Load control system and tool wear monitor Additional equipment • Gantry loader: High-speed 3-axis gantry robot, 8 kg capacity (automatic loading/unloading) • Bar feeder: 1.5 m CNC bar loader • Parts catcher: Automatic swing-arm for small finished parts • Parts conveyor: Integrated conveyor belt for finished components • Sampling compartment: Independent area for in-process inspection • Chip conveyor: Rear-exit hinge-type chip conveyor • Workholding: 2 × Kitagawa 250 mm hydraulic chucks • Tooling included: Complete set of static holders (OD/ID) and live holders (axial/radial) Technical Specification Counter Spindle No Driven Tools No

Condition: used, functionality: fully functional, Year of construction: 1991, LVD guillotine shear for sale in good condition. The machine can be inspected under power. It has only been used for thin sheet metal processing. Price on request. Kjdpfxjy Ry Ehj Aarslt

Condition: used, Number of boring spindles 5 St. Klsdpfx Aaew R S T Aerjt Working width 250 mm Working height 160 mm

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) Ksdpfx Aasq Au Tlerelt 3-left (11 kW) 4-Right (9 kW) 5-Top (15 kW)- with hydraulic clamping 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Klodpfxjyr Ek Rj Aaret Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, total length: 11,000 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1D/25, year 2005, working direction left/right, consisting of following: - APKV-4/25, combination of inlet conveyor of sealing robot, with glass and frame measuring device and automatic 4-lane kork application machine, year 2005 Kedjy Sxk Sspfx Aarslt - VFL-1D/25, sealing robot, including options for triple units (2 sealing cycles), , with Beckhoff PC and Lenze servo drives - DOS-1PUD + SID, material dosing for Polysulfide (base 200 litre, catalyst 20 litre) and Silicone (base 200 litre, catalyst 20 litre), year 2005 The machine will be sold as described above, EXW our warehouse in Austria. No further guarantee or warranty given. Available end of May 2026

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 4,000 mm, total width: 1,500 mm, total height: 3,600 mm, working height: 2,500 mm, input voltage: 400 V, overall weight: 2,700 kg, type of input current: AC, full-automatic Lisec desiccant filling machine A2RL-25/25RN, year 2001 technical details: min spacer width: 6 mm max spacer width: 24 mm max spacer size: 2500 x 2500 mm min spacer size: 400 x 400 Ksdpertm Saofx Aarelt power supply: 3x400VAC/50Hz control voltage: 24VDC The machine is in very good condition and can be seen in our warehouse on appointment. 1 special trolley for full-automatic frame support will come with the machine (2 more are available on request as an option)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Lisec sealing robot VFL-1DS/25, year 2001, working direction left/right, consisting of following: - RTVN-15/25VFE, inlet conveyor of sealing robot, with glass and frame measuring device and barcode reader for shape sealing, year 2001 - VFL-1DS/25, sealing robot, including options for triple units (2 sealing cycles), stepped elements (bottom 0-50 mm, front, rear and top 0-140 mm), as well as special shapes according to Lisec special shapes catalog, Beckhoff PC, Ksdpfjy Sv Unex Aarjlt - DOS-1PUD + SID, material dosing for PU (base 2 x 200 liters, liquid hardener 200 liters) and SI (base 200 liters, hardener 20 liters), year 2001, completely overhaule prior delivery Will be sold as described above, EXW our warehouse in Hofkirchen/Austria. No further guarantee or warranty given. Available from stock

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, total length: 8,500 mm, total width: 4,000 mm, total height: 3,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec Sealing robot VFL-1/25, year 1996, for maximal unit sizes of 3500 x 2500 mm, partly refurbished in 2025, consisting of following components: Kjdoy Sv Uzspfx Aarslt - RTVN-11/25VFE, inlet conveyor sealing robot - VFL-1/25, sealing robot including options for shape sealing according to Lisec shape catalogue and sealing of triple units in two cycles, new transport chains on inlet, outlet and take-off section - DOS-1PSD, mixing and metering station for Polysulfide, completely overhauled The machine is in very good working order. All material and hydraulic hoses as well as check valves have been replaced, pumps and metering device fully refurbished The machine can be seen in our warehouse in Hofkirchen/Austria on appointment and is available from our stock.

Condition: used, mileage: 17,529 km, power: 130 kW (176.75 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 9,700 kg, maximum load weight: 8,340 kg, overall weight: 18,000 kg, wheelbase: 4,900 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro3, suspension: other, number of seats: 2, total length: 8,780 mm, Year of construction: 2012, operating hours: 17,529 h, construction height: 3,400 mm, The Terberg BC 182 Kamag Wiesel WBH 25 is a versatile transfer vehicle first registered in 2012. The vehicle has a service history of 17,529 hours. Kljdpfx Aswdyu Njaret Powered by a 4,249 cc diesel engine with 130 kW (177 hp), it complies with the Euro 3 emissions standard. The automatic transmission ensures a smooth driving experience. The vehicle is in good condition and has a valid general inspection until July 2025. With a vehicle length of 8,780 mm, a width of 2,500 mm, and a height of 3,400 mm, it offers sufficient space for a variety of applications. The wheelbase is 4,900 mm, and the permissible gross vehicle weight is 18,000 kg. This used yellow Terberg has two seats and has had only one previous owner. Viewings are possible without appointment during the stated business hours. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale excepted.