Used Kaj Olesen Pinbone Remover for sale (4,847)

Condition: used, Recycling bin, 65 liters, H970xW400xD380mm, gentian blue, stationary * Made of galvanized sheet steel, liquid-tight in the bottom area * Odor-inhibiting * Flame-retardant * With galvanized inner container * Easy removal due to detachable top Itodpfx Agsz U Ua Ds Aon * One-sided

Condition: used, Universal cleaner, 500 ml, NSF K1, spray can, Smart Straw™, WD-40 SPECIALIST · Fast-acting solvent-based cleaner · Removes grease, oil, dirt, and grime without leaving any residue · Suitable for metals, range hoods, and flooring (check material compatibility beforehand) · Works instantly on contact · Easy to wipe off Itsdpfxez U Tmis Ag Asn · Leaves no residue · Operating temperature range: room temperature · NSF K1 registered (Reg. No. 145373) · Other technical properties: Color: colorless

Condition: used, This peeling blade, made of heat-stabilized chrome steel, represents a groundbreaking innovation for tapering and peeling logs. It largely eliminates the need for complex and expensive peeling machines and offers a range of advantages: it can be attached to conventional circular saw motors due to its extremely thin blade; laser-processed cutting edges ensure smooth, crack-free surfaces; the material’s high transverse stability ensures long service life; smooth and complete lateral chip removal is achieved through corresponding relief cuts; and free spaces on the cutting edges allow for convenient re-sharpening. Peeling blade diameter: 350 mm Itedoz U Tp Repfx Ag Aen Blade thickness: 3.0 mm Max. thickness incl. peeling knife: 4.5 mm Number of peeling knives: 4 Bore: 30 mm

Condition: used, Abrasive belt CS 411 Y L.2000mm W.150mm G.40 for STEEL/STAINLESS STEEL/NON-FERROUS METALS KLINGSPOR · Zirconia alumina · endless Ijdpo Aaa N Hjfx Ag Ajtn · water-resistant · resin-bonded Y-weave · densely coated · particularly tear-resistant, high-performance abrasive belt with high material removal rate for coarse grinding and deburring of steel and stainless steel · Other technical properties: Color: blue

Condition: used, Set of 5 coconut/elastomer brooms, L. 600 mm, with 10 handles, L. 1400 mm, SOREX Iedpfx Ags Aaa Rqj Aotn · Complete set for removing coarse dirt in indoor (coconut) and outdoor areas (elastomer, suitable for wet conditions) · Metal handle holder for easy handle attachment.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp is approximately 2,700 mm long x 560 mm wide, with grating on the ramps. Loading height: 840 mm. 12 lashing points, each rated for 2.5 tons. 8 lashing points, each rated for 6 tons. Steel side rails, foldable and removable. Wooden planks, 50 mm thick. Loading area slopes towards the rear. Internal loading area width: 2,480 mm. Removable rear overhang. Front design allows for through-loading. Vehicle with temporary registration. Also available with a 5,300 mm loading area length!! Rental price starting from 500 €. Subject to printing errors, errors and changes. Sample images. More details under: ! Isdpfx Agoz Td Nrj Aotn

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp is approximately 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 12 tie-down points, each with a capacity of 2.5 tons, 8 tie-down points, each with a capacity of 6 tons, steel sideboards, foldable and removable, wooden planks, 50 mm thick, loading area sloped at the rear, interior loading area width 2,480 mm, rear underride guard removable, front section for drive-through loading, vehicle with temporary registration, also available with a loading area length of 5,300 mm!!, -- subject to printing errors, errors and changes, sample images --, more data at: !, More Details: ! Isdpfx Agoz Td Nxe Ajtn

Condition: used, CTS   Type: CS-70/600-5/S   CTS climate testing chamber CS-70/600-5/S water-cooled version with observation window, test specimen protection and documentation   For sale is a high-quality CTS climate testing chamber, type CS-70/600-5/S for precise temperature, climate and stress screening tests in research, development, quality assurance and industry.   The device is in used condition and can be viewed in its entirety according to the images. Current display: Manual operation / Warning (sludge removal of the water bath).   Operating hours according to the display: Total operating hours: 19,788 hours Compressor cooling: 8,699 hours Compressor pre-cooling: 11,432 hours Circulation pump: 2,905 hours   Technical data:   Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Temperature change rate heating: approx. 11.95 K/min Temperature change rate cooling: approx. 5.47 K/min Test chamber volume: 600 liters   Electrical connection: 400 V 3/N 50 Hz Rated power: 18.4 kW Rated current: 30.6 A Protection class: IP 22   Refrigerant: R404A / R23 Pre-cooling stage: R404A – 5.0 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2 equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800   Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar   Equipment / features:   Observation window in the door Stainless steel test chamber CTS touch panel / LCD control panel digital control with program operation Test specimen protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath automatic water replenishment possible Interfaces (RS232 / Ethernet possible according to documentation) integrated control cabinet Industrial version   Pipe penetrations according to installation plan: 1x penetration DN 50 2x penetration DN 125   Test chamber dimensions according to installation plan: approx. 850 x 850 x 830 mm   External dimensions according to installation plan: approx. 1900 x 1120 x 1875 mm   Weight / mass according to documentation: approx. 750 kg   Scope of supply:   CTS climate testing chamber CS-70/600-5/S including existing documentation / test certificates Scope of supply as shown in the pictures   For your safety as a buyer: The device can be inspected by appointment. Loading with a forklift can be arranged.   For your safety as a buyer, please note the following information!   The following points can be carried out in advance: Itodpfjy H Hmwox Ag Aon 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. Documented test run after successful inspection   Condition: used   (Subject to changes and errors in technical data!)   We will be happy to answer any further questions by telephone or message.

Condition: used, 3D SYSTEMS Type: ProJet 660 Pro 3D printer 3D SYSTEMS 3D printer The ZPrinter ProJet 660 Pro 3D printer features a large build volume. This allows large models to be produced without prior cutting. Furthermore, the large base area increases productivity when printing many small models in a single printing process. 3D color printer with enormous productivity and color accuracy. The ProJet ColorJet color 3D printers from "3D Systems," also known as ZPrinters, use a layer-by-layer process based on the ColorJet CJP "Binder Jetting" technology, directly in a powder bed. As a result, even with complex and highly detailed prints, these 3D printers do not require dedicated support structures. The unconsolidated powder supports the components during printing and is then semi-automatically recycled. Application areas: Communication of form and design, installation analyses, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for deep drawing, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of 3D full-color printing systems. Technical data: ZPrinter ProJet 660 Pro 3D printer Build format: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum feature size: 0.1 mm Automation: Fully automated (automated setup and self-monitoring, automated loading of powder, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Itodpezdyxrofx Ag Ajn Layer thickness: 0.089-0.102 mm Number of jets: 1520 Details: ZPrinter ProJet 660 Pro 3D printer File formats for printing: STL, VRML, PLY, 3DS, ZPR Device dimensions: 188 x 74 x 145 cm Device weight: 340 kg Power requirements: 100-240 V, 1.5-7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional and Windows Vista® Business/Ultimate Legal regulations: CE, CSA Special requirements for installation: None Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Recycling bin, 65 liters, H970xW400xD380mm, signal yellow, stationary * Made of galvanized steel sheet, leak-proof in the base area Itsdpfsz Tw I Usx Ag Aen * Odor-reducing * Flame-retardant * With galvanized inner container * Easy removal through a detachable top * Single-sided

Condition: used, Abrasive belt CS 411 Y, L. 2000mm, W. 75mm, Grit 36, for STEEL/STAINLESS STEEL/NON-FERROUS METALS, KLINGSPOR · Zirconia alumina · Endless · Water-resistant · Resin-bonded Y-weave Itodpfxsz Twy Rj Ag Asn · Densely coated · Particularly tear-resistant, high-performance abrasive belt with high material removal rate for rough grinding and deburring of steel and stainless steel · Other technical features: Color: blue

Condition: used, Cleaning wool box, H680 x W400 x D400 mm, body light gray/lid periwinkle blue, steel sheet STUMPF · Made of galvanized steel sheet · With hinged lid to prevent fire and explosions · The top part is removable · Non-combustible according to fire protection class A DIN 4102 Itodpoz Tx Szsfx Ag Asn

Condition: used, Hammer drill bit ENDURO D.25mm, working length 200mm, total length 320mm, SDS-max, HELLER Iedpfx Ajz Tximsg Ajtn · Highest service life · Stable head geometry · Withstands even impacts with reinforcing steel · Extremely fast removal of drilling debris without clogging, thanks to the wide spiral design · Vibration-optimized spiral · Certified by the PGM (Testing Community for Hammer Drill Bits) according to the requirements of the German Institute for Construction Technology (DIBt) Applications: Concrete, reinforced concrete, stone, calcium silicate brick, masonry, marble and clinker · Further technical features: Type: Y-CUTTER SDS-max

Condition: used, Industrial cable bridge, L1000 x W350 x H50mm, PVC, black * Made of PVC * Height 50 mm * Internal chamber of 2 x 25 x 38 mm, expandable to 1 x 75 x 38 mm by removing the center divider Itodpfxjz Tyygo Ag Aon * 2 additional outer chambers with a diameter of 25 mm * Can be driven over * Suitable for

Condition: used, Multi-tier trolley L1830 x W620 x H1800 mm, total load capacity 500 kg, 4 tiers, FETRA Itodpfx Agjz T Azae Aon · Complete with shelves that can be installed horizontally or at an angle · Steel tube profile construction, powder-coated · Fixed and removable shelves made of wood composite panels, surface with beech veneer

Condition: used, - Heavy-duty snow blower with a 65 cm working width (just as powerful as the 10 and 13 HP models) - Side-open auger housing for unparalleled performance and efficiency. - Powerful HONDA GX270 engine with 6.3 kW (8.6 HP) - Optimized handlebar height (6 cm higher than the 10 and 13 HP models) - Always comfortable! (the handlebar height remains constant) - Remote-control choke lever! (the choke lever is located at the rear of the ignition switch – a first in the SXC series) - Electric height adjustment! (significant ease of operation, also on the SXC 965E) Dimensions Overall length: 1,505 mm Overall width: 683 mm Overall height: 1,120 mm Weight: 140 kg Engine Model: HONDA GX270 (gasoline) Power: 6.3 kW (8.6 hp) Starting system: 12V electric start + manual pull starter Performance Clearing width: 652 mm Clearing capacity: 55 tons/hour Throwing distance: 17 m Iedpfx Agoz T Atcs Ajtn Equipment Drive system: HST professional hydrostatic drive Steering: Manual Auger system: Electric height adjustment via button Chute adjustment: Electric via joystick

Condition: used, Abrasive belt CS 411 Y L.2000mm W.150mm G.60 for STEEL/STAINLESS STEEL/NON-FERROUS METALS ZK KLINGSPOR · Zirconia alumina · Seamless · Water-resistant · Resin-bonded Y-weave · Densely coated · Extra tear-resistant, high-performance abrasive belt with high material removal rate for rough grinding and deburring of steel and stainless steel · Other technical properties: Color: blue Itjdpfx Asz T S Euog Ajn

Condition: used, This peeling blade, made of heat-stabilized chrome steel, represents a groundbreaking innovation for debarking and tapering logs. It largely eliminates the need for complex and expensive peeling machines and offers numerous advantages: it can be easily attached to conventional circular saw motors due to its extremely thin blade; laser-cut edges ensure smooth, crack-free surfaces; the material's high transverse stability ensures a long service life; smooth and complete lateral chip removal is achieved through appropriate clearance cuts; and the edges have sufficient clearance for convenient re-sharpening. Peeling blade diameter: 600 mm Blade thickness: 4.0 mm Iodpoz T Uwyofx Ag Aetn Maximum thickness incl. peeling knife: 5.5 mm Number of peeling knives: 4 Bore: 30 mm

Condition: used, Wet and dry vacuum cleaner ATTIX 751-11, 1500 W, 3600 l/min, 230 mbar, 70 l, Nilfisk · Tilting and removable stainless steel container · Silent Power · Soft start · Device socket · Accessory and cable holder Itedpfxoz T Uiis Ag Asn · Multifit accessory system · Other technical features: Weight: 25 kg · Sound pressure level: 57 dB(A) · Mains voltage: 230 V / 50 Hz · Subject to mandatory testing: yes

Condition: used, Puller 20-10-SP, Spanning range: 100/200/250 mm, Spanning width: 120 mm, 2.5 t, KUKKO · Two-arm design Ijdpfsz T Dhhox Ag Astn · Equipped with extra-slim puller hooks · Suitable for tight spaces · Used for removing gears, bearings, sprockets, etc. Application: For removing gears, bearings, sprockets, and synchronizer sleeves · Can be used as an internal and external puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical specifications: Weight: 3.69 kg

Condition: used, Puller tool 204-2, clamping range 100 mm, clamping width 100 mm, lateral clamping jaw, KUKKO · with lateral clamping jaw · indispensable for removing flush-fitting ball bearings, gears, sprockets, steering levers and similar parts · the clamping jaw presses the puller hooks firmly against the part to be removed · Further technical specifications: weight: 2.04 kg Itodpfxsz T E Tfj Ag Ajn · Design: lateral clamping jaw

Condition: used, HALDER SIMPLEX L hammer, 490 mm long, head diameter 80 mm, made of white superplastic · 2-part clamping housing made of cast steel · Interchangeable hammer heads made of white superplastic · Medium hardness Itedpfxez T Ig Ie Ag Aen · Very durable · Wear-resistant · Wooden handle · Medium-hard impact · Applications: paving work, setting curb stones, scaffolding construction, tent/hall construction, garden and landscape construction, sheet metal processing, dent removal, assembly/repair work in the automotive sector, body construction, housing assembly, assembly of sharp-edged workpieces, fence construction, driving in wedges, carpentry, joinery · Other technical features: inserts: white superplastic · Head diameter: 80 mm · Impact: medium hard · Handle: wood

Condition: used, Parallel Vise, Magnat, Jaw Width 160mm, Clamping Width 225mm, Forged, DURLACH · Forged · With MDS system · Clamping jaws are serrated and have a hardened surface layer · Precise, adjustable guide · Large anvil surface · Extra-large clamping width Ijdoz Tr Ivjpfx Ag Ajtn · From 120 mm with mounting device for pivoting additional jaws · Special product advantages: · With square drive for all common 1/2" ratchets (ratchet not included) · Removal of the spindle key by quick-release mechanism · MDS spindle enables easy and efficient work, especially with problematic workpieces · Further technical specifications: · Hole spacing: 145 mm · Bore diameter: 15.0 mm · Anvil size (a x b): 120 x 105 mm · Overall length: 567 mm

Condition: used, Puller 11-2-A, Spanning range: 200 mm, Spanning width: 650 mm, 20 t, KUKKO · Three-arm design · With sliding puller arms that remain parallel at all times · Made of special steel · Extra robust design for particularly high loads · Thanks to the parallel adjustment, the parts always rest on the large contact surfaces of the puller hooks and are pulled off gently · The puller can also be used as an internal puller by repositioning the puller hooks Application: for removing heavy pulleys, gears, and similar parts · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Further technical specifications: Weight: 25 kg Itedpfx Agoz Trzcj Aon · Material: Special steel

Condition: used, The RX-230 wood chipper is equipped with hydraulic feed rollers and is specifically designed to efficiently shred branches, tree trunks with a diameter of up to 23 cm, and other wood materials. The thickness of the wood chips can be adjusted by controlling the speed of the feed rollers. The double-sided blades are attached to a large cutting disc with a diameter of 920 mm, which, due to its weight of 135 kg, can easily shred branches and trunks. For safety, the chipper is equipped with a safety switch and protective covers. A system for controlling the material feed and removal from the hopper improves safety and efficiency. The discharge chute can be rotated to direct the wood chips in the desired direction without interfering with the operator's work area. The RX-230 offers high performance and comfort during operation. The resulting wood chips can be used in a variety of ways, whether as fuel for screw conveyors or as material for compost or as bedding under shrubs. The chipper is powered via the tractor's power take-off shaft; it is recommended to use a universal joint with a slip clutch or shear pin clutch to protect the drive in case of overload. The bearings are maintained via special lubrication points. The RX-230H chipper is equipped with its own oil supply system with hydraulic pump/tank. No hydraulic connection to the tractor is necessary. Technical data: Min./Recommended power: 80/120 hp Weight: 900 kg Max. cutting diameter (fresh softwood): 230 mm Recommended PTO speed: 540-1000 rpm Mounting system: Three-point linkage Cutting disc diameter: 920 mm Number of blades: 4 + 1 counter-blade Itedpez Twc Ssfx Ag Ajn Height of the discharge chute: 255 cm