Used Kampwerth Presto Horizontal Baler for sale (6,739)

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Hnedpfjwiq N Isx Ap Hjn Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: good (used), - Completely overhauled by us, ready for immediate use - Type: 100013 - Serial number: 011136 - Glass thickness 2-12 mm - Minimum glass dimensions 120 x 80 mm - Max. Washing width: 1000 mm - Dimension: L=2900mm W=1650mm H=1250mm - Roller spacing 55mm -3 pairs of brushes / 1 pair of racks - Connected loads: 380/50V, 13kW - Price on request Hnedper Nvldofx Ap Hsn

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. Hnedpfx Apozbxwis Hjn • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Fanuc Oi-MD control system, 40-position automatic tool changer, spindle mount conforming to DIN 69871-SK40, internal coolant supply, dual-pallet system, Hnsdpfozcxh Rjx Ap Hsn pallet size 500x500 mm, chip conveyor, coolant system with filtration.

Condition: used, Year of construction: 2014, functionality: fully functional, number of spindles: 1, number of slots in tool magazine: 60, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical specification: - Horizontal spindle - Spindle HSK-A63 - Spindle torque 240 Nm (to be confirmed) - 4-axis machining - ATC for 60 tools - Pallet changer (2 pallets) - Pallet size 500x500 mm Hedsyrfxhepfx Ap Henn - Coolant chiller - Coolant filtration system by Knoll - Coolant pressure 50 bar through spindle - Fanuc control system - Chip conveyor - Robot interface - Linear measuring systems (scales) - Manufactured in 2014

Condition: used, Year of construction: 2009, 1 unit horizontal bending machine KUNKEL MB10 Capacity: 10 tons, operating voltage: 400V, 1.1kW Color: as shown in the pictures, in accordance with the images and upon inspection Year of manufacture: 2009 Condition: used Hedpfxjzclukj Ap Honn Location of the goods: production hall Payment method: prepayment by bank transfer Shipping: self-collection only from the Coburg location

Condition: good (used), Year of construction: 2011, travel distance X-axis: 1,200 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,200 mm, Travel path B: 0-360° Travel path A: +45° to -90° Hodpozcn Elofx Ap Honn Spindle interface: HSK 100 Rotary spindle diameter: 200 mm Spindle speed: 15,000 rpm Chain magazine: 60 positions Pallet changer Chip conveyor High-pressure coolant through spindle Coolant filtration system

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, Tool holder: HSK 63 Turning spindle: 85 Spindle speeds: 20,000 rpm Chain magazine: 60 positions Chip conveyor Pallet changer Hnsdpfx Apozcn D Ue Hen Coolant filter unit High-pressure coolant through spindle

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 0162463201, For sale: ÜSTÜNKARLI UHYB-120 industrial horizontal band saw I am selling a robust ÜSTÜNKARLI UHYB-120 horizontal band saw designed for professional log sawing in sawmill and wood processing operations. This is a heavy-duty industrial machine with a solid steel construction, hydraulic log handling, and control from a central panel. Key specifications: Manufacturer: ÜSTÜNKARLI Model: UHYB-120 Year of manufacture: 2016 Serial number: 0162463201 Weight: approx. 9,650 kg Dimensions: 12,350 × 4,500 × 4,060 mm Power supply: 3-phase, 380–400 V / 50 Hz Total power: 59.4 kW Saw carriage speed: 0–42 m/min The saw is equipped with hydraulic log rotation, hydraulic clamping hooks, support arms, powered rollers, and a saw head carriage that moves along rails. This makes it suitable for precise and efficient processing of logs into lumber, beams, planks, boards, or pallet material. The machine is suitable for sawmills, lumber manufacturers, and companies involved in wood processing. Technical documentation / operating manual including technical data, maintenance instructions, and a list of spare parts is available. Hnjdpfey A Dymsx Ap Hsn Price negotiable. If you are seriously interested, I will provide more information, photographs, or the possibility to inspect the machine.

Condition: new, Number of boring spindles 1 St. Boring depth max. 150 mm Motor output 1,8 kW Götzinger HR 150 - Hoffmann system ----- The machine that gives you the highest precision when drilling two levels guaranteed. Frame and slot drilling machine, enables drilling in two levels in one clamping. - Well thought-out, precise and practical stop system - particularly smooth and play-free grid positioning, Feed and transverse adjustment - Guidance systems for the highest demands - Special drill chuck - precise, quiet concentricity - for drilling levels via digital display - Two side stops offer enormous advantages, center stop on request - Continuous front stop with position markings - Drilling pattern depending on the wood profile - free choice, in a 12 mm grid Special grids also possible - integrated dust extraction - the exchangeable additional equipment (e.g. drill heads, Miter stops, parapet railing device, side and folding stops) can be easily installed without tools. and dismantle. Technical data: Drilling unit ----- Height adjustment in 2 levels via digital display Height adjustment 100 mm pneumatically Drilling stroke/depth 150 mm by hand Transverse adjustment 320 mm via grid Drilling pattern width 12 mm pitch, standard Three-phase motor 230/400 V, 50 Hz, 1,420/2,840 rpm, 1.3-1.8 KW Tool holder ----- Special drill chuck with 2 tool changing inserts 1 x M10, 1 x D 16 stop system ----- 2 side stops can be swiveled in/out 1 longitudinal stop (tube) with adjustable folding stop approx. 1500 mm Elongated hole stop left and right Workpiece clamping ----- pneumatically via foot valve Dust extraction Hedpfx Apeytx T Ij Hsnn Special accessories - see PDF attachment ----- Price of the above mentioned machine on request! ----- Recommended accessories (additional charge): Two-jaw chuck 2–20 mm, replacement part: EUR 648.00 Chassis: EUR 295.00 2 workpiece support arms (left/right), approx. 800 mm, swivelling: EUR 1,298.00 ----- (technical data according to manufacturer - no guarantee!)

Condition: good (used), Year of construction: 2014, Large waste compactor / cardboard press, Höma, – used: Price at location: only €18,950 (net) for self-dismantling! Manufacturer: Höma Type: PB4000 Year of manufacture: 2014 Machine number: 140409 Hedpfezbyf Ijx Ap Hsnn Weight: 1,200 kg Pressing force: not specified, but we estimate 40 tons. The press has a second discharge chute. Price includes a small crane with trolley. 30 kW Condition: good Available: from Q4/2026 Location: Hamburg For an additional charge, a conveyor system for empty cardboard boxes, over 100 m long, is available! Photos at the end of the advertisement!

Condition: used, Year of construction: 1999, Heller MC16 103 Serial No. 32-44069 Year of manufacture: 1999 Spindle speed: 45-16000 1/min SK40 X-axis travel: 630 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Number of tools: 80 Tool diameter: 70/150 mm (with adjacent, free tool positions) Tool length: 320 mm Hnedpsydi H Tefx Ap Hsn Number of pallets: 2 Pallet dimensions: 400x500 Maximum pallet load: 500 kg B-axis: NC Tool length measurement: Yes Control system: Sinumerik 840D Probe: Heidenhain

Condition: defective spare-parts repository (used), Year of construction: 2002, operating hours: 34,188 h, functionality: not functional, machine/vehicle number: 18455, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, nominal power (apparent): 65 kVA, torque: 200 Nm, controller manufacturer: Siemens, workpiece height (max.): 750 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 500 kg, total height: 2,700 mm, total length: 4,700 mm, total width: 3,400 mm, table width: 500 mm, table length: 400 mm, table load: 500 kg, rotational speed (max.): 25 rpm, overall weight: 12,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 2,801 h, number of spindles: 1, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, For sale is a horizontal CNC machining center, HECKERT CWK 400 D. The machine is currently not functional and is therefore explicitly offered as defective / for spare parts / for refurbishment. Manufacturer: Starrag Heckert Type: CWK 400 D Control system: Siemens Sinumerik 840D Axes: 4 axes (X/Y/Z + B-axis) Pallet changer available Spindle with only 2,801 operating hours → very good basis for repair Pallet pool with a total of 23 pallets: Hnjdozb Hfbopfx Ap Hon 15 pallets with threads 8 pallets with grooves Machine is still connected to the power supply → inspection under power is possible Coolant system / chip conveyor / typical equipment available (machine-dependent) Immediately available Buyer is expected to dismantle the machine themselves Loading can be supported upon agreement Due to the condition, the sale is made without warranty or the possibility of return. Inspection is strongly recommended.

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Hnjdew U Uh Depfx Ap Hjn Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Cutting length: 3200 mm Cutting width/Cutting depth: 3200 mm Cutting height: 130 mm Main blade unit Scoring blade unit 1 fixed front table with air cushion and guide 2 movable front tables with air cushion Pushing carriage with 11 clamps Console with integrated PC "eye-M" Software: Maestro Cut START/STOP foot pedal Approximate weight: 4150 kg. Cutting optimization software included Hnedpfszdqk Ssx Ap Hen Available: September 2026

Condition: used, Year of construction: 1987, grinding length:520 mm grinding width:160 mm workpiece height:300 mm magnetic clamping plate, electical:BxT=520X160 mm wheel diameter:230 mm Year:1987 weight of the machine ca.:1,5 t dimensions of the machine ca.:LxBxH 1,5x1,8x1,6 m Hodpfxocxxy Uo Ap Hsnn

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Spindle speed: 10,000 rpm Hsdpfezb R I Tex Ap Hsnn Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations

Condition: like new (used), Year of construction: 2017, operating hours: 10,000 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, Base Machine - SH-5000P - Demonstration Machine Like New • Basic machine, 4-axis • Control: Siemens 840D sl • Table size: 500x500mm • Max. table load: 500kg • X/Y/Z travels: 730/730/830mm • X/Y/Z rapid traverse: 60/60/60 m/min • Milling spindle: • HSK63 • 30/50kW • 18,000 rpm • Tool magazine with 40 stations • Automatic pallet changer • Automatic loading door • Hydraulic unit • Oil separator • Oil mist extraction • Air conditioning unit for electrical cabinet • External measuring systems, linear axes • Media feed under pallets • Central lubrication • Door interlock • Coolant unit • Internal cooling with 70 bar high pressure • Coolant and compressed air gun • Chip conveyor • Documentation in German, digital Hnjdpszb Igysfx Ap Hen

Condition: used, Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel distances X=2000 mm, Y=1500 mm, Z=1250 mm - Siemens 840 DsL CNC control - NC rotary table for 4-sided machining, 1250 mm x 1250 mm - Horizontal spindle HSK100 - Spindle: 2500 rpm, HSK 100, 2200 Nm spindle torque - Approx. 9,500 spindle hours - Tool changer system HSK 100 / 40 stations - Chip conveyor - Internal/external air blow-off device - Minimum quantity lubrication for dry machining of castings Hnodjzb Igtjpfx Ap Hjn - Full enclosure - Large interference circle 2300 mm - Double pallet changer - Short delivery time, subject to prior sale - Year of construction: 2010 Coolant supply available as an option - ICS 60 bar for deep hole machining

Condition: good (used), functionality: fully functional, pressing force: 160 t, stroke length: 500 mm, operating speed: 30 mm/s, reverse speed: 40 mm/s, table width: 850 mm, table height: 780 mm, throat depth: 400 mm, oil tank capacity: 210 l, total length: 3,370 mm, total width: 1,730 mm, total height: 1,480 mm, overall weight: 6,500 kg, installation height: 400 mm, pressing speed: 3 mm/s, Equipment: documentation/manual, Hydraulic horizontal box press PYXWM-160. Manufactured by WMW VEB Dessau - 1978. The machine has been overhauled. Ready to work. Max. pressing force 160 tons. Piston stroke 500 mm. Piston speed: Forward 30 mm/sec Pressing 2.5 mm/sec Backward 40 mm/sec Height from base to center of piston 260 mm. Machine frame height 780 mm. Hjdpfx Ajwndnusp Hsnn Base length from support tool 600 mm. Support tool length 520 mm. Max. clamping width 1730 mm. Working clamping width 400 mm. Support tool height 400 mm. Support tool spacing min-max 240-1100 mm. Dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width 700 mm. Engine power 11 kW. Oil tank capacity 210 liters.

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 Hsdpfxszbmzvs Ap Henn rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2023, operating hours: 2,594 h, functionality: unexamined, machine/vehicle number: 6000030, total height: 3,400 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 27,523 kg, number of spindles: 1, Equipment: chip conveyor, Installation dimensions: 8000 x 6000 x 3400 mm Weight: 27,500 kg Operating hours: 2,594 h KNOLL aerosol extraction system AerosolMaster 4000 ATS S/N 1580192 Hnsdpozbt D Dsfx Ap Hon Year of manufacture: 2022 KNOLL chip conveyor 750 K-1 S/N 1591356 Year of manufacture: 2023

Condition: used, Year of construction: 2007, total height: 2,500 mm, total length: 11,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 7.200 kg Price: On request - Machine available from: 2026-06-24 - Year: 2007 - Documentation available: Yes - └ Type Documentation: Technical data, Electrical diagrams, User manual, Assembly manual - └ Language: NL - └ Type: Hardcopy - CE marking present: Yes - CE certificate present: No - Serial number: 97649 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 1000 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 9 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 - - Main motor power [kW]: 18.5 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: No Hnjdjy Ipntspfx Ap Hsn - Tool changer positions [pcs.]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, Offcut conveyor, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 6200 - Table width [mm]: 1320 - Working range X [mm]: 6200 - Working range Y [mm]: 1535 - Z-axis working range [mm]: 275 - X-axis maximum stroke [mm]: 6820 - Y-axis maximum stroke [mm]: 1963 - Transport dimensions: 11000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new Hnjdpfsflc R Dex Ap Hon

Condition: like new (used), Year of construction: 2024, tool height: 130 mm, sheet thickness copper (max.): 20 mm, bending force (max.): 12 t, Stierli bender 120 CNC Horizontal bending machine, Siemens controller Working force 12 tons Very universal, for flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools. tool height 130 mm Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Backgauge length stop 1000/2000mm Program memory 200 programs Bending sets 20 bends Hnjdpfjflc R Usx Ap Hsn Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new