Used Keyence Iv2-G500Ca Vision Sensor - Sensorkopf D for sale (49,435)

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Njdpfxoyhi Huo Ag Dsla Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Njdpswktwkjfx Ag Dola Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: ready for operation (used), With this offer, you are purchasing a used Keyence WM-3000 mobile coordinate measuring system. Item for sale: 1 x Keyence WM-3000 with the following equipment: Includes camera tripod Nlsdsxzn E Uspfx Ag Dea Includes laptop with measuring software Includes Messtatser battery Includes transport case Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. For more information, please feel free to contact us personally.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Nodpfxeyvv Tre Ag Dola Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: #4C0N000333, type of input current: AC, total width: 449 mm, total length: 557 mm, total height: 614 mm, overall weight: 35 kg, Equipment: type plate available, Item description: Keyence IM-8030T measuring system Nledpfx Asyf H S Nog Dja Including measuring head, control unit, rotation unit IM-RU1, 3-jaw chuck, 2-jaw chuck, keyboard, mouse, manual, etc. Technical specifications will follow shortly. ----- Item condition: The item is in very good condition and can be inspected at any time by appointment. Safe transport is ensured as all original packaging materials are available.

Condition: new, For sale: professional industrial pump LOWARA BG9/D. The pump is brand new, unused, and stored as warehouse stock. Sold with original packaging and manual. LOWARA (Xylem) is among the top companies in the industrial pump sector. Perfect for water installations, industry, agriculture, pressure systems, and as a water pump. Technical data: Manufacturer: LOWARA Model: BG9/D Power: 1.1 kW Output power: 0.9 kW Voltage: 3-phase 400V Frequency: 50 Hz Flow rate: 20-65 l/min Head: 28.6 - 41.1 m Max pressure: 8 bar Material: stainless steel (INOX) Connections: 1 1/4" / 1" Weight: approx. 14.7 kg Condition: Nsdpfx Agjyval Rj Dsla New – warehouse stock Possible minor storage marks on the packaging.

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. Nlodoynv E Rspfx Ag Dsa You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel Njdpfsxdu Tqox Ag Dela - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: used, functionality: fully functional, KEYENCE CORP GL-R103F-T + GL-R103F-T . Items sold in pair. Price is for pair. Model #: GL-R103F-T + GL-R103F-T More Information: Nsdpfxjyu S Sme Ag Dsla Safety Light Curtain Supply: 24VDC Detection Height: 1020mm Detection Distance: 0.2m - 10m Detection Capability: 14mm Diameter Output: PNP/NPN 500mA Connection: 12-Pin

Condition: used, functionality: fully functional, KEYENCE CORP GL-R24H-T + GL-R24H-R. Items sold in pair. Price is for pair. Nedpfjyu S Nrox Ag Dola Model #: GL-R24H-T + GL-R24H-R More Information: Safety Light Curtain Supply: 24VDC 24x Optical Axes Detection Height: 460mm Detection Distance: 0.2m - 15m Detection Capability: 25mm Diameter Output: PNP/NPN 500mA Connection: 12-Pin

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S Nsdpfjyq Ufuex Ag Dsla * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed Nedpjyq Ufzofx Ag Djla * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-compartment tail lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h Nledpfx Ajyq Ufnjg Doa * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Year of construction: 2022, condition: ready for operation (used), This KEYENCE WM 3000 was manufactured in 2022. A reliable CMM machine, it offers precise dimensional measurement and quality control. Ideal for industries requiring high accuracy in component inspection. Contact us for more information about this machine. Max. measuring length (W × D × H) 10,000 mm × 3,500 mm × 5,000 mmCertified measuring range (W × D × H) 3,000 mm × 1,500 mm × 1,500 mmMeasurement accuracy ±(28 + 5 L/1000) μm*Repeatability ±10 µmMinimum display unit Distance 0.001 mmAngle 0.001°Rotation angle of themeasuring headHorizontal ±90°Vertical ±30°External input 2 voltage-free inputsCommunicationBluetooth communication Bluetooth 5USB communication USB 3.0Infrared communication 945 nmPower supply Powered via supplied mains adapterRated values Rated voltage 24 V DCCurrent consumption 1.7 AEnvironmental conditions Operating ambient temperature +10°C to +35°COperating relative humidity 20 to 80% RH (non-condensing)External dimensions 327.7 mm × 250.9 mm × 357.3 mm Additional equipment • Measuring Head WM 3000 • USB Cable • Power Supply • Measuring Probe WMP3000 • Probe Tip Ø 5 mm • Calibration Device • Tripod • 3D-CAD Add-on Software • Transport Case • 4x Batteries for Measuring Probe Njdpex D Sdajfx Ag Dsla Machine Benefits Technical Machine Benefits • Battery charger • Dongle for measuring software Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2016, operating hours: 5,845 h, This KEYENCE Agilista-3200W was manufactured in 2016. It includes Modeling Studio software, printer setup materials, side covers, and an AC power cable. Ideal for those looking to enhance their 3D printing capabilities. Contact us for more information. Additional equipment • Modeling Studio software Nljdpfxjx Stldo Ag Dja • Printer setup materials • Printer side covers • AC power cable

Year of construction: 2023, condition: ready for operation (used), This KEYENCE IM-8020 optical measurement machine was manufactured in 2023. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-8020 optical measurement machine. Contact us for more information. Additional information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates • Software • Clamping device • Glass scale Nljdpfox D Dl Nsx Ag Dsa • Barcode scanner • Lighting • StyliOptional Accessories: • Test probe sets: 80 pcs, range 0.3–0.99 mm • Test probe sets with handles: 350 pcs, range 0.4–4 mm • Gauge sets: 800 pcs, range 4–12 mm • Limit plug gauges: 265 pcs, range 1–43 mm • Setting rings: 50 pcs, range 0.6–47 mm • Thread plug gauges: 170 pcs, range M1–M24 and various inch threads • Thread ring gauges: 265 pcs, range M1–M63 and various inch threads • Micrometers: 70 pcs, range 0–150 mm (analog and digital)Optional: Comprehensive package of measuring instruments

Year of construction: 2020, condition: ready for operation (used), This KEYENCE IM-7030T optical measurement machine was manufactured in 2020. It features a digital measuring projector with a 300 x 300 mm measuring field, height probe, and photograph sensor. Accessories include a flat stylus, AC power cable, and a control unit. A mouse, keyboard, and a German user manual are also provided. Contact us for more information about this machine. • Measuring head: Digital measuring projector 300 x 300 mm measuring field Nodpfox D Imwex Ag Djla • Photograph sensor • Height probe • Digital measuring projector • Control unit • IM Accessory • Flat stylus • AC power cable • Mouse, keyboard, and user manual (German)

Year of construction: 2018, condition: ready for operation (used), This KEYENCE IM-7030T was manufactured in 2018. It features a digital measuring projector with a 300x200 mm measuring field, light probe, and height probe. Accessories include a control unit, AC power cable, mouse, keyboard, and a user manual in German. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information. Njdpfsx D Ipfox Ag Dsla • Digital measuring projector measuring head • Measuring field: 300 x 200 mm • Probes: light probe, height probe Additional equipment • Digital measuring projector control unit • AC power cable • Mouse and keyboard • User manual (German)

Year of construction: 2011, condition: ready for operation (used), This KEYENCE IM-6020 optical measurement machine was manufactured in 2011. It includes a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6020 optical measurement machine. Contact us for more information. (Two units are available) Additional Information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector Nodpoyfft Sofx Ag Dela • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) Optional Accessories: • Test probe sets (80 pcs, 0.3–0.99 mm) • Test probe sets with handles (350 pcs, 0.4–4 mm) • Gauge sets (800 pcs, 4–12 mm) • Limit plug gauges (265 pcs, 1–43 mm) • Setting rings (50 pcs, 0.6–47 mm) • Thread plug gauges (170 pcs, M1–M24 and various inch threads) • Thread ring gauges (265 pcs, M1–M63 and various inch threads) • Micrometers (70 pcs, 0–150 mm, analog and digital) Availability: • 2 units availableOptional: Comprehensive package of measuring instruments

Year of construction: 2016, condition: ready for operation (used), This KEYENCE IM-6025 optical measurement machine was manufactured in 2016. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6025 optical measurement machine. Contact us for more information about this machine. Additional information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector • Control unit • AC power cable Nlsdeyf Du Uopfx Ag Dea • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates • Clamping device • Glass scale • Barcode scanner • Lighting • StyliOptional Accessories: • Test probe sets: 80 pcs, range 0.3–0.99 mm • Test probe sets with handles: 350 pcs, range 0.4–4 mm • Gauge sets: 800 pcs, range 4–12 mm • Limit plug gauges: 265 pcs, range 1–43 mm • Setting rings: 50 pcs, range 0.6–47 mm • Thread plug gauges: 170 pcs, range M1–M24 and various inch threads • Thread ring gauges: 265 pcs, range M1–M63 and various inch threads • Micrometers: 70 pcs, range 0–150 mm (analog and digital)Availability: • 2 units availableOptional: Comprehensive package of measuring instruments

Condition: excellent (used), Protein cooker direct from Meat-free factory. 6 rack capacity. Lovely condition. Nledpst R Skmjfx Ag Doa

Condition: like new (used), Year of construction: 2019, operating hours: 24 h, functionality: fully functional, type of input current: AC, working width: 1,500 mm, total width: 1,787 mm, total height: 1,953 mm, Equipment: compressor, Optical sorter with 5 different channels, sort by colours and size, for sorting grains, coffee, seeds, rice, nuts, plastic. Hi-resolution MultiVision inspection system - targets subtlest colour variations as well as light and dark colour defects Proprietary PROsize technology - sorts products and foreign material which are the same colour as the good product using size characteristics. Nlodpewlk Ivjfx Ag Dsa Machine run time is only 24 hours, we buy the machine for a project that doesn't start, the machine is like new.

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Nledpfx Aeyrun Esg Dea Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Axle 2: left 8 mm right 8 mm Axle 3: left8 mm righ 8 mm Njdpfeym Aimox Ag Djla We have the possibility to stack trailers!

Condition: excellent (used), functionality: fully functional, mileage: 1,035,000 km, power: 426.59 kW (580.00 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, MAN TGX 18.580 D 38 Full-Air - First registration: 03/2019 - Mileage: 1,035,000 km - Retarder: Intarder - ADR AT - Stationary air conditioning - Navigation system - LED headlights - Double fuel tank - Double bunk - Tyres: 50% CUSTOMIZED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO 96 MONTHLY INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR GROUP’S OTHER LOCATIONS: DOMENICO TRUCK SRL, NAPLES LOCATION DOMENICO ESPOSITO S.P.A., EBOLI (SA) LOCATION – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 Nljdpfx Agowgy H Ro Doa OPENING HOURS: MONDAY-FRIDAY 8:30-19:00 / SATURDAY 8:30-14:00 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – DAF – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – MAN - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer – Refrigerated semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Fixed platform – Crane – Tipper – 4 axle – 4 rear axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtainsider – Box – Tail-lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines all liability for any discrepancies in technical specifications, optional equipment and features which may occasionally differ from those shown in the description. We invite you to verify the features of the specific vehicle.