Used Knopp Duplokant S2 for sale (3,341)

Condition: excellent (used), Here we offer shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: Temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation temporally in useful chamber center ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -65°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate Hedpfji Az Egox Ap Henn heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Operating hours: 27.903 hrs. Weight: 1000 kg For you as a buyer, the following information for your safety! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: HT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone. Hnodpfxex Hglys Ap Hjn

Condition: excellent (used), Vötsch Model: VT 7012 S2 Water-cooled Hsdpfx Apox Hhfhs Hjnn Two-chamber configuration Hot chamber: Temperature range of hot chamber: +50°C to +220°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold chamber: Temperature range of cold chamber: -74.5°C to +70°C Temporal temperature deviation at the center of useful space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2115 mm, height 1970+ mm Port diameter: 67 mm Voltage: 3/N/PE AC 400V +6/-10% 50Hz Rated power: 10 kW Rated current: 25 A Refrigerants: R-452A / R-23 Weight: 1000 kg Important safety information for buyers: The following actions are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: new, Year of construction: 2025, Fully automatic paper labelling machine for applying labels on both sides (back and front). PLC controlled or touch switch knob control, photoelectric device (LEUZE sensor), variable speed motors and conveyor chain board. - Specification: label length: 10-250mm; label width: 10-150mm; bottle diameter: customized; label core diameter: 76mm. max. label roll diameter: 300 mm. Label precision: ± 1mm; max. speed of the machine in neutral: 150 cycles/minute; power: 220V/380V, 50Hz/60Hz, 750W; machine dimensions: L2400mm×W1500mm×H1400mm; weight: 400kg. Hsdpfx Aev Nk Sqop Hsnn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), machine/vehicle number: 0-200-03-8334, functionality: fully functional, workpiece height (max.): 60 mm, feed rate X-axis: 24 m/min, controller model: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Hnsdoydiymepfx Ap Hjn Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Fusing: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Electronically adjustable working height via CNC Powered, rubberized conveyor belt with increased pressure Panel support guide Lateral roller conveyor with idler rollers for panel support Sanding unit Infrared lamps for panel edge preheating Six-position coil holder magazine with automatic edge change via CNC EVA hot-melt gluing unit with premelter and glue pot Edge pressing unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with two motors and automatic tilt adjustment Overlapping cut-off / milling unit with two motors Glue / milling unit with two tiltable motors, electronically adjustable via CNC Multifunctional 4-motor corner rounding unit (smoothing + rounding) with CNC control, automatic adaptation Provision for integrating an additional working station Edge scraping unit Oscillating brush unit

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Hnodpfsx Iulwox Ap Hen

Condition: used, Year of construction: 2002, functionality: fully functional, HOMAG Optimat KL79 A20/S2 (2002) – Full Configuration The edge banding line is in satisfactory working condition, fully operational and ready for production. Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) Hnedpfjycg D Tex Ap Hon • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz • Compressed air: 8 bar

Condition: used, Kelch Shrinking Device / S2 Shrinking Unit Tool Shrinking and Cooling Device Tool Holder HSK 40 You are welcome to come for an inspection. Hnsdjxxlgqjpfx Ap Hen We are happy to organize affordable shipping for you! You will receive a proper invoice. A net invoice can also be issued for international customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: used, Power Control Pc 22 Panel height 60 mm Solid wood mm 20 Pvc / Abs mm 3 Hnjdpfegiyn Isx Ap Hen Feed speed up to mt / min 24 Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Panel support guide Side roller conveyor with idle wheels for panel support Grinding group Lamps to heat the edge of the panel 6-position reel holder magazine with automatic edge change from C.N. Gluing unit for EVA hot melt glue with pre-melter and glue pot Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. End trimming unit with 2 motors with automatic inclination adjustment Overlapping trimming unit with 2 motors Gluing unit with 2 tilting motors electronically adjustable by C.N. Multifunction 4-motor rounding unit (gleaner + rounder) with numerical control adjustment in automatic Free space for the possible insertion of another work group Edge scraper group Oscillating brush group

Condition: new, Year of construction: 2026, Bore and hinge insertion machine with magazine feeding for the automatic processing of hinges and hinge mounting plates. Robustness, durability and ease of use distinguish our automatic drilling and insertion machines. Short introduction: Hjdsdx A U Dspfx Ap Honn • Single and multi hinge boring and inserter for high capacity • Massive and robust drilling units • Inserting die made of steel for a long life time use • Solid wood drilling with standard 1,5 kW motor • Safety-control with metal-detector (option)

Condition: new, Year of construction: 2025, 🧰 Product Features • Manufacturer: Bauer • Model: AW-S2/200 • Condition: new • Color: galvanized Hodpfx Apjxbq Aps Honn • External dimensions: 120 x 80 x 36 cm • Collection volume: 204 l • Load capacity: 650 kg/m² • Net weight: 64 kg • Sheet steel thickness: 3 mm • Ground clearance: 10 cm • Finish: hot-dip galvanized • Design: conical • Stackable: Yes, nestable • Number of drums: max. 2 x 200 l drums • Incl. grid grating 💰 Price €290,- net plus VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: possible by appointment at any time Constant stock of over 5,000 linear meters of pallet racking from various brands (Subject to changes and errors in technical data, specifications, and prices as well as prior sale! See our terms and conditions, all prices ex-works plus VAT.)

Condition: used, Year of construction: 2004, SECOND-HAND GLUE SPREADER OSAMA MOD. S2 R 1300 - CE RULES - Working width 1300 mm - N. 2 rollers Hsdemxkxujpfx Ap Hsnn - Year 2004

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, LNS Barfeeder Hnedsw Nq Txepfx Ap Hen Model: LNS Express 332 S2

Condition: reconditioned (used), Year of construction: 1997, operating hours: 5,929 h, functionality: fully functional, center height: 100 mm, grinding length: 400 mm, center width: 400 mm, grinding wheel diameter: 350 mm, grinding wheel width: 30 mm, The machine was overhauled in 2026! TECHNICAL DETAILS Grinding length: 400 mm Center height: 100 mm Distance between centers: 400 mm Max. workpiece weight in the tailstock between centers: 20 kg Grinding wheel diameter max.: 350 mm Grinding wheel width: 30 mm Grinding wheel bore: 127 mm Working feed rate Z-axis: 100 - 3,500 mm/min Hsdpfx Apjza Ea Ie Honn Table swivel: 0 - 30° Power of grinding spindle motor: 3 kW Speed of workpiece spindle: 30 - 1,200 rpm Power of workpiece spindle: 0.5 kW Tailstock arbor: MT2 Quill stroke: 20 mm MACHINE DETAILS Dimensions & Weight Machine dimensions: 2,350 x 1,480 mm Weight: 1,600 kg

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 Hjdpfx Apoxnrtcs Honn 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: used, Year of construction: 2011, INDEX MS22-6 Mfd. 2011 IEMCA SIR Loader Knoll System Equipped as pictured Hnedpfxey Ihk Hj Ap Hen

Condition: used, Year of construction: 2017, Mfd. 2017 Configuration: 2-Synchron (Dual Counter-Spindle) Production Hours: 20,000 Overview Well-equipped and maintained INDEX Werke MS22-6 configured for high-precision production, including medical components. This machine features a robust Siemens control platform, dual counter-spindles, and extensive automation for efficient, lights-out capable operation. Control & Technology • Siemens 840D SL CNC control • Dual NCU (Numerical Control Units) • TRANSMIT / TRACYL functions • ARTIS tool monitoring system • 2 additional electronic shaft preparations Configuration & Equipment • 6 main spindles • 2 SCARA counter-spindles • 2 parts catchers with conveyor belt • Bar scrap recuperator • INDEX bar guide system • IEMCA PRA bar loader • Bar feeder interface • Fire protection system Capacity & Performance • Max. bar diameter: 22 mm • Spindle speed: 10,000 rpm • Spindle power: 8.7 / 15 kW • Torque: 10 / 18 Nm Axes & Travels • Total slides: 10 Hsdpfxsy Abc Es Ap Hjnn • Main slides travel (X/Z): 62 / 85 mm • Counter-operation slides: 2 • Counter slide travel (X): 62 mm Additional Specifications • Number of counter-spindles: 2 • Counter-spindle speed: 10,000 rpm • Machine dimensions (L x W x H): 3330 x 1830 x 2860 mm • Weight: 5,700 kg • Connected load: 75 kVA Applications • High-precision medical components • Complex turned parts requiring multi-operation efficiency • Ideal for high-volume production environments

Condition: excellent (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, bar diameter (max.): 22 mm, INDEX MS22-8 Mfd. 2019 Hnsdpjx H H Nrsfx Ap Hsn 2 NCU 2 Syncrons 2 Y-Axis Control: Siemens Solution Line Knoll System Bar Feed: IEMCA SIR rack loader (12-ft) 22,000 on-hours 10,000-15,000 Hours

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: Hjdpfow N S E Aex Ap Honn The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Edge Material Roll: 0.4 – 3mm Edge Material Strip: 0.4-3mm Feed Speed 8m/min Joint Trimming Unit 40mm Quick Change Application Unit Hnodpfszdklcjx Ap Hjn Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Pneumatic Adjustment Profile Scraping Unit Glue Joint Scraper Buffers LED Indoor Lighting EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Year of construction: 2011, condition: used, functionality: fully functional, Blackman & White Genesis 2300 Conveyor (DOM June 2011) Overall Size – 7.6m (including cradle) X 3.1m Belt size - 5m x 2m Cutting Window – 4.6m X 1.3m Max Cutting Speed – 1500mm/sec Pneumatic Oscillating Drag Knife with 1 spare tool head (Unsure on working state) Full Vacuum System (Single Zone) Leibinger JET3 Inkjet Marking System (NON WORKING) MasterCut 2100 CL Drive Software Included Hnjdpfxszdkv Is Ap Hsn Alphacam 2012 Processable Materials Composite Pre-Preg Materials (Carbon Fibre , Glass Fibre, Kevlar) Textile Fabrics Low Density Foam

Condition: used, mileage: 452,917 km, power: 265 kW (360.30 HP), first registration: 12/2011, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 5,100 mm, fuel: diesel, color: orange, gearing type: automatic, emission class: euro5, suspension: steel, loading space length: 6,530 mm, loading space width: 2,500 mm, loading space height: 400 mm, Year of construction: 2011, Equipment: air conditioning, crane, electric window regulation, trailer coupling, Technical information Hodpfjzdztkjx Ap Honn Number of cylinders: 6 Engine capacity: 11.946 cc GVW: 26.000 kg Drivetrain Drive: Wheel Make of engine: Mercedes-Benz Axle configuration Tyre size: 315/80R22.5 Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Functional Mast: telescopic (8 parts) Make of bodywork: EFFER 305/8S = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, mileage: 1,043,920 km, power: 353 kW (479.95 HP), first registration: 04/2017, fuel type: diesel, tire size: 315/60 R22.5, axle configuration: 6x2, wheelbase: 5,900 mm, fuel: diesel, brakes: engine braking, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,600 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2017, Equipment: ABS, central locking, cruise control, electric window regulation, parking heater, power mirror, second fuel tank, spoiler, trailer coupling, = Additional options and accessories = - CD player - Roof spoiler - Spare key - Speed limiter - Aluminum fuel tank - Headlights - Stability control - Standard air conditioning - Sun visor - Alternating current - Toolbox - Xenon lights = Further information = Axle configuration Tire size: 315/60 R22.5 Axle brand: Anders Brakes: Disc brakes Suspension: Air suspension Front axle: Steered; Left tire tread: 8 mm; Right tire tread: 7 mm 1st rear axle: Twin tires; Left inner tread: 6 mm; Left outer tread: 5 mm; Right inner tread: 5 mm; Right outer tread: 4 mm 2nd rear axle: Left tread: 5 mm; Right tread: 5 mm Hodpfxoynxn Io Ap Hsnn Weights Unladen weight: 11,455 kg Payload: 14,545 kg Gross vehicle weight: 26,000 kg Condition Damages: None

Condition: refurbished (used), functionality: fully functional, High-precision cylindrical grinding machine for internal and external surfaces. Studer S20 Favorit (new version with automation) Distance between centers: 400 mm - Height between centers: 100 mm Currently undergoing reconstruction! Please inquire about the current delivery time. Photo = sample photo Hnodpfezcytbox Ap Hon Accessories available upon request! Project reference: OP26-003

Condition: excellent (used), mileage: 303,932 km, power: 427 kW (580.56 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, power mirror, retarder, = Additional options and accessories = - Air suspension - Aluminum fuel tank - Enhanced engine brake - Intarder - Low noise - PTO - Refridgerator - Remote central locking - Sleeping cabin Hodpfxoymrg Is Ap Hjnn - Sun visor - Tipping hydraulics - Toolbox = Remarks = WDB96402410366545 = More information = Technical information Number of cylinders: 6 Engine capacity: 15.569 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 15.350 kg Carrying capacity: 10.650 kg GVW: 26.000 kg Functional Crane: PALFINGER Z15, year of manufacture 2022, behind the cab Make of bodywork: PALFINGER S260Z96 Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A