Used Knuckle Joint / Coining Presses for sale (13,032)

Condition: used, Year of construction: 2017, +++ Attention: This item is part of an online auction! +++ Bjdpfeza Ahiox Af Hswn

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, Roll Divider and Rounding Machine Fortuna Automat A 3 H Dough dividing and rounding machine Roll press Fortuna Automat size 3 Head cleaning to the rear Bwsdpfx Aoygdcuof Hon Very robust construction With 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine We have many other roll presses in stock!

Condition: new, Year of construction: 2020, pressing force: 300 t, machine/vehicle number: DF0240 - Rev.00, pressure:300 t passage width:600 mm stroke:500 mm Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Bwsdpfxedxvfke Af Hen Return Capacity:30 t Engine Output:30 kW Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Year of construction: 2005, condition: ready for operation (used), Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible. Bodjzbb R Eopfx Af Hown

Year of construction: 1971, condition: ready for operation (used), Max. stroke: 100mm, max. press force: 50t, max. oil pressure: 300kg/cm², motor power: 5.5hp, approx. 4kW, pump: Gury 6-16. An inspection on site is possible. Bwsdpfszbb R Sex Af Hjn

Year of construction: 2011, condition: ready for operation (used), Drive: TOX power package S 04.00.300.44D, pneumatic connection: G 3/8 inch, compressed air preparation: filtered and dried compressed air, max. particle size: 40µm, control: STE 336-306-1/2, max. press force at 10bar air pressure: 40kN, air pressure: 3 to 10bar, total stroke: 300mm, force stroke: 40mm, ambient temperature: 10 to 60°C, length: 1753mm, width: 1100mm, weight of the yoke: approx. 1290kg, with documentation. The machine has been shut down for years, but is in good condition, an inspection on site is possible. Bwedpfozbb Scex Af Hsn

Condition: ready for operation (used), Year of construction: 1992, Immediately available due to business closure: CNC press brake Lotze Model 327 x 1500 kN Year of manufacture: 1992 Cybelec DNC 70 control Press force: 150 t Working length: 3500 mm Bsdpfx Afozaqc Is Hjwn CNC-controlled backgauge Throat depth: 300 mm Stroke: 300 mm Drive: 15 kW Complete set of top and bottom tools (prisms) Weight: 12 t Price: EUR 6,500 plus VAT ex location

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Bjdezap Tlepfx Af Hown Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Bedpfx Afozap Tfs Hown Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex location: Hydraulic single-column press Edelhoff Type HEP 45 Bodpfxezap S Uj Af Hjwn Year of manufacture: 1992 The machine complies with the latest UVV safety regulations Press force: 45 tons Table: 1000 x 1000 mm Stroke: 300 mm Drive: 7.5 kW Weight: 6 tons Price: EUR 3,000 plus VAT, ex location.

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: P210807601, 25 HL Central Inflating Membrane Press No. 1 “ATHENA 25” PNEUMATIC CENTRAL ELASTIC MEMBRANE PRESS • Tank capacity: 25 hl • Elastic tubular membrane made of natural rubber, suitable for food use, supported by supporting elements, 9 mm thick • Fully perforated stainless steel tank • Air compressor integrated into the press • Blower for rapid deflation of the membrane • Self-braking geared motor for tank rotation • 380 V three-phase power supply, 50 Hz; required power 4 kW • Rotation transmission achieved through a crown gear, pinion, and chain • Sliding door, pneumatically operated, for manual loading and unloading of the pomace • Axial load with stainless steel valve, diam. 150 mm, DIN connection • Fixed must collection tray with 50 mm DIN connection • Sliding central slide for draining the spent product • Two-door engine compartment cover • Internal conveyors for discharging the marc • Rear door for tank inspection and washing Bodpfszbm Rdex Af Hewn • Electrical panel with IP66 protection • Pushbutton for manual and emergency controls, equipped with a cable for movement around the press; the manual controls are electromechanical and not managed by a PLC, thus guaranteeing the ability to operate the press even in emergency situations • Automatic pressing cycles controlled by a PLC and a color touch-screen control panel. This system, easy to use and highly flexible, allows you to: o View the cycle parameters and the operating status of the press o Enter custom programs o Perform dedicated programs for apples and pomegranates o Phase jump options to accelerate the cycle or repeat pressing phases o Automatically manage the discharge of the spent product o Select the language of use from a menu • Main dimensions: length: 4 m; width: 1.65 m; height: 2.05 m; weight: 1,300 kg • Entirely constructed from high-quality AISI 304 stainless steel Pressing times: • Apples (chopped): 2 h - 4 h, depending on the required yield and the quality of the apples • Pomegranates: 1 h 30' • Fermented grapes: 50' • White grapes that are easy to process: 1 h 15' - 1 h 30' • White grapes that are difficult to process (Muscat type): 2 h - 2 h 30' * External tank washing system, with pressure nozzles * Tank level control system with float and pump control * STAINLESS STEEL AISI 304 LEG EXTENSION - 500 MM (GROUND CLEARANCE: 900 MM) PRODUCTION Load capacity Apples (chopped) 2,150 - 2,850 kg Pomegranates (peeled) 2,150 - 2,850 kg Whole grapes (door load) 1,700 – 2,100 kg Whole grapes (axial load) 2,400 – 3,000 kg Destemmed-crushed grapes 4,300 - 5,700 kg Fermented grapes (wine-making capacity) 100-125 hl

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Pressing force 300 to Stroke 500 mm Area between the columns 1250x1000 mm Installation height 1000 mm Rapid traverse 22 mm/s Working speed 2 mm/s Motor 7.5 kW Length 2000 mm Width 1500 mm Height 3300 mm 4-column guide Round ram guide Table and ram with T-slots 2-hand operation Operating instructions Siemens touchscreen control and electric control panel NEW Bsdpevgncnsfx Af Hswn , 50 programs storable, for programming of: - Upstroke and downstroke rate - Pause time in the floor - Decompression time - Setting the working pressure - Piece counter - Prestop in upward and downward movement - Setting for manual and automatic movement - Management of alarms and anomalies

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Erika Record Automat bread roll press TOP Erika Record Automat, 30-piece set Partially refurbished head New stainless steel blades With 3 forming plates Easy to clean Only available from us, DGUV V3 certified Connection: 400V, 16A-CEE plug Bjdeyurfmopfx Af Hjwn Used machine, overhauled Warranty + spare parts service Visit our wide selection!

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 345 kg, total length: 660 mm, total width: 620 mm, total height: 1,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, machine/vehicle number: 2026, Equipment: start-stop system, New New Bread Roll Press NEW NEW TOP Fully automatic dough dividing and rounding machine Daub Model: 4-30 "The Original" with 3 rounding plates Bwsdpfxou Rzvge Af Hjn Dividing range: 40 to 130 grams/piece Dividing: 30 pieces with stainless steel knife Simple operation of the 10 programs User-friendly and easy-to-clean design! Dough ring with Teflon coating and "easy click" Reinforced press head Replaceable knife head Robust technology! Machine is mobile Only available from us, DGUV V3 certified Connection: 400V, 16A-CEE plug Dimensions: 620 x 660 x 1700 mm, W x D x H New machine & SAB certified With warranty + spare parts service Option: Leasing & rental service Rounding plates Maintenance contract Service package Training & commissioning We have a large selection of bread roll presses in stock!

Condition: good (used), Year of construction: 2004, Heidelberg SM 74-10-P-H Perefcting: 5/5-10/0 Max size: 53 x 74 cm Age: 2004 Location: Europe •⁠ ⁠CP 2000 •⁠ ⁠Autoplate •⁠ ⁠CP Tronic •⁠ ⁠Alcolor Vario Bjdpfevv Nrcsx Af Hswn •⁠ ⁠Color Asisstant •⁠ ⁠Ink Temperature Control •⁠ ⁠Blanket and Impression Cylinder Wash Up Device •⁠ ⁠Water cooled •⁠ ⁠In Production

Condition: used, Year of construction: 1993, Number of drilling spindles: 8 pcs Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Drilling direction: from above, fixed Number of material clamps: 2 pcs Type of material clamping: pneumatic Design: stationary Location: Bodpfx Aoza Hlfsf Hswn

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 4025 mm -Width: 1990 mm -Piston diameter: Ø 63 mm -Stroke: 110 mm -Pressure force: 20 t Bsdpszakf Njfx Af Hswn -Overall dimensions: 1990/4025/H1920 mm -Weight: 5060 kg

Condition: good (used), functionality: fully functional, operating hours: 978 h, power: 13 kW (17.68 HP), pressing force: 165 t, table width: 3,000 mm, Complete retrofitting was carried out in 2023. Includes various tools. Bwodpfx Afezacp Hs Hsn

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) Bwjdpjwclkysfx Af Hon - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GEARLESS FLEXOGRAPHIC PRINTING PRESS F&K FLEXPRESS 16S/10 Central impression flexographic printing press Manufacturer: Marga Fischer & Krecke Model: Flexpress 16S/10 Gearless 10 colors Materials that can be printed: PE, PP, OPP, PET, PA. Mechanical speed up to 460 m/min Bedpfezafipjx Af Hswn Maximum material width: 1200 mm Maximum printing width: 1150 mm Minimum/maximum print repeat: 370/800 mm Fully automatic turret unwinder and rewinder Unwinder inner diameter: 76 and 152 mm Rewinder inner diameter: 76 mm Maximum coil diameter: 1000 mm Thermal oil drying system Corona treater: 2 units AVT 100% camera system Bloss viscometers Year: 2005

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm Bjdpfsv Az T Sjx Af Hswn ram surface 380 x 200 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3850 kg dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - new braeke plate - current press inspection

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos. Bjdpfxoymn Hws Af Hown

Condition: used, Year of construction: 2016, available from the Malta location – Weima WL 15 / 45 kW / 42 blades / screen: 12/15 mm – discharge conveyor belt WL 15 – magnetic roller at the end of the belt – briquetting press TH 1500 M / 30 kW – hammer mill WHM 600 / 350 mm / 7.5 kW Bsdpfx Aezbc Ixjf Hswn Location: Customer's premises

Condition: excellent (used), Year of construction: 2010, AMADA MODEL HFT 8025 80 tons capacity x 2500 bending length hydraulic downstroking press brake complete with CD 2000 4 AXIS colour graphic cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFT 8025 downstroke CNC Press brake Year 2010 Tonnage 100 KN Type CD 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 2500 mm Open height 470 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 6100 kg Bed Length 2500 mm Bed Width 60 mm Bwsdpfsu A Dgrsx Af Hsn Open Height 470 mm Throat Depth 420 mm CNC Control Backguage Stoke (X axis) 700 mm/s Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: used, functionality: fully functional, For sale is a MABI 8Z dished end punch which we used as a multi-hole punch. Bedpjx Dbunjfx Af Hjwn