Used Ks Alukap Duo K0163 for sale (2,101)

Year of construction: 2019, operating hours: 1,200 h, condition: ready for operation (used), travel distance X-axis: 3,100 mm, travel distance Y-axis: 2,150 mm, travel distance Z-axis: 100 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis MASTERWOOD Ks 21.31 wood boring machine was manufactured in 2019. It features an impressive XYZ working dimension of 3100 x 2150 x 100 mm and a tool magazine with a maximum capacity of 12 tools. The machine is equipped with an automatic loading and unloading system using suction cups and has a 360-degree rotation axis. If you are looking to get high-quality boring capabilities, consider the MASTERWOOD Ks 21.31 machine we have for sale. Contact us for further details. • Commissioned in 2020 • Condition: perfect Rcjdpfx Aey Exizefgsb • Working hours: 1200 • Drilling unit • 360° rotation axis • 4 vacuum zones Additional equipment • Automatic loading and unloading system with suction cups • Loading and unloading table

Condition: good (used), Year of construction: 1989, well-maintained multiblade saw Rcodoy Dnxispfx Afgsb Chain width: 230 mm

Condition: ready for operation (used), Year of construction: 2019, clamping force: 6,500 kN, screw diameter: 60 mm, overall weight: 6,500 kg, controller manufacturer: ENGEL, This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Oil Reservoir Capacity - Injection Unit: 500 l • Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool • Water Consumption (32°C): 4.80 m3/h Machine Benefits Qualitative Machine Benefits • The machine has electric water batteries (4 e-flomos with 8 circuits each). • The injection units are fitted with accumulators which enable a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Machine Benefits • Maximum injection capacity: 890 cm³ • Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1 • Reduced torque @ maximum screw speed: 1600 nm • Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • Ld ratio: 24. 0 • Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel • Opening force with pressure pad: 510 kn • Maximum distance between platens: 1750 mm Extra Information Dimensions & Weight • Drop Out Chute Width: 1100 mm • Weight of Clamping Unit: 20,000 kg • Maximum Mold Weight (Moving Platen): 7,330 kg • Maximum Mold Weight (Stationary Platen): 7,330 kg • Maximum Mold Weight (Total): 11,000 kgCycle Data (Euromap 6) • Stroke: 700 mm • Dry Cycle Time: 2.9 s Control System: Monocompute CC300 Main Features • 21.5” full HD touchscreen • USB interface / Ethernet connection • E-move control element • 3 keycards for user login • Graphic symbols for cycle control • Screen languages: German, English • Acoustic error signal / Signal light for error displayPrograms & Monitoring • Power Control: optimizes motor performance during dispensing Rsdpfxsy D Npcs Afgjcb • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight & viscosity • IQ Weight Control: automatic injection parameter adjustment during fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Plates • Reinforced clamping plates (FAP & BAP +50 mm each) • Reduced min./max. tool height and panel distance (–100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical calotte minimized • BAP: without ejector opening • Additional threads according to EUROMAP VOL1 • Centering grooves according to drawing • Plate ejector – Variant A (adapted to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moving platen • 2-fold on fixed platen • 2-fold on moving platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for intermediate core pull position Mold Heating & Cooling • Mold heating: 16 circuits, max. 40 kW heat output (Euromap 14) • Temperature monitoring interface (moving & fixed platen) • 4-fold hydraulic mold nozzle control • Separate cooling water connection (tool & machine) • Temperature control unit interface: Engel protocol, 20 mA current loop • 4-way flow regulator (0–10 l/min) • Hose specification: max. 90 °C / 4 bar • Hoses for mold cooling

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover Rcodpfx Aexab Dzefgjb - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: good (used), Year of construction: 2019, operating hours: 4,046 h, load capacity: 2,000 kg, lifting height: 1,580 mm, fuel type: electric, mast type: duplex, construction height: 1,280 mm, empty load weight: 1,600 kg, mileage: 4,046 km, Electric ride-on stacker Brand: Still DUO Stacker Year: 2019 Hours: 4,046 Capacity: 2,000 kg Lift height: 1,580 mm Overall height: 1,280 mm Battery: 2019 Equipped with external charger. Rcedpfx Afoy Apalegsb

Condition: new, Year of construction: 2023, High Class Shredder KS 1000/2 Technical Data: Propulsion: 2x 15kW Motors Revolutions: 16,5 RpM at 7269 NM Cutting width: 1000 mm Blade width: 19 mm Dimensions: 1700 x 2400 x 2550 mm Advantage of double motor drive: Constant torque on both shafts Areas of Application: Industrial waste: Metal Cans & Buckets, Plastics, Wood Production waste: Cartons, Paper, Rubber Electronic waste: Redpfjft U Sasx Afgecb Cable, Cable Remains, Small Electronic Devices Other waste: Food, Leftovers, Biowaste, Wood, Glas, Ceramic, Porcelain

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Redod Sblmopfx Afgocb Blade Strength: 19mm Working width: 1000mm

Condition: good (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, power: 30 kW (40.79 HP), rotor width: 1,000 mm, 2-shaft shredder KS-1000/2 Excellent condition Approx. 450 operating hours. Rotor knives are slightly rusty due to wet material, but their overall condition is still very good! Refurbished condition: Rcedpfx Aeyrfgrsfgeb – New paintwork Includes: control cabinet, frame & hopper

Condition: ready for operation (used), Year of construction: 2011, clamping force: 11,772 kN, screw diameter: 130 mm, injection weight: 6,210 g, overall weight: 70,000 kg, Hydraulic injection moulding machine manufactured in 2011. This ITALTECH KS 1200 8300 ES features a screw diameter of 130 mm and a clamping force of 11,772 kN. It has a shot volume of 8630 cm³ and a maximum injection pressure of 1460 bar. If you are looking to get high-quality injection moulding capabilities, consider the ITALTECH KS 1200 8300 ES machine we have for sale. Contact us for further details. Rsdpfsy Dua Tex Afgocb Injection Unit • Injection unit size: 8300 • L/D ratio: 20 • Shot volume (theoretical): 8,630 cm³ • Max injection pressure: 1,460 bar • Injection flow rate: 1,200 cm³/s • Screw speed: up to 110 rpm • Screw torque: 8,400 Nm • Plasticizing capacity (HDPE): 140 g/s • Heating capacity: 79 kW • Temperature control zones: 5 + 1Clamping Unit • Clamping force: 11,772 kN (~1,200 t) • Opening force: 300 kN • Opening stroke with minimum mould height: 2000 mm • Opening stroke with maximum mould height: 1400 mm • Mould height: 600–1,200 mm • Max daylight: 2,600 mmPlaten & Ejector • Platen size (W x H): 1,900 x 1,770 mm • Distance between tie bars (W x H): 1,250 x 1,120 mm • Tie bar diameter: 220 mm • Ejector force: 226 kN • Ejector stroke: 300 mmPower & Consumption • Pump motor power: 180 kW • Installed power: 265 kW • Oil tank capacity: 1,800 LPerformance • Dry cycle: 10 s

Condition: excellent (used), Catalogue number 7956 TECHNICAL SPECIFICATIONS - Max main blade diameter: 350 mm - Blade bore diameter: 30 mm - Max cutting height: 90 mm - Main blade adjustable up/down and at angle - Blade guard included - With side carriage - Cutting length on carriage: 1300 mm - Cutting width on guide: 1340 mm - Main motor: 4 kW - Table dimensions: 1100 x 1030 mm - Table dimensions with extension: 2100 x 1840 mm - With scoring unit - Max scoring blade diameter: 100 mm - Scoring spindle diameter: 22 mm - Scoring motor: 0.55 kW - 3 spindle speeds: 4000, 5000, 6500 rpm - Dust extraction nozzle diameter: 125 mm - Dimensions (L x W x H): 3280 x 2340 x 1450 mm - Weight: 866 kg ADVANTAGES – Made in Poland – Blade guard included – With scoring unit – DTR technical documentation – Used saw, in very good condition Rcjdjyy Rqaepfx Afgsb Net price: 11900 PLN Net price: 2840 EUR (based on rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: used, mileage: 420,000 km, power: 228 kW (309.99 HP), first registration: 05/2004, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro3, Year of construction: 2004, Equipment: ABS, crane, fog lights, power mirror, = Additional options and accessories = - Immobilizer - Lift Axle - PTO - Radio CD player - Toolbox = Remarks = Rsdsyz Awbjpfx Afgjcb Crane Number of hydraulic extensions: 4 Number of extra functions: 2 Rotator: ✓ MAN TGA 26.310, 2004, 420,000 km Euro 3, 6x2, Air conditioning, HIAB 122 E4, 4x Hydraulically extendable, 2x Extra function (rotator), Tires all around 95%, Like new! = More information = Front axle: Steering Rear axle 1: Double wheels Crane: HIAB 122 E4 Duo = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: ready for operation (used), Year of construction: 2003, clamping force: 8,000 kN, screw diameter: 90 mm, total width: 3,000 mm, total height: 2,500 mm, overall weight: 44,000 kg, product length (max.): 8,900 mm, Hydraulic injection moulding machine manufactured in 2003. This Engel DUO 5550/800 features a clamping force of approximately 800 tons and a screw diameter of about 90 mm. It has a shot volume of around 2700 cm³ and a maximum injection pressure of approximately 1900 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel DUO 5550/800 machine we have for sale. Contact us for further details. • Shot volume: ~2700 cm³ • Max. injection pressure: ~1900 bar Rodpjy Alwmsfx Afgocb • Plasticizing capacity: ~77 g/s • Clamping unit: Two-platen design (no traditional toggle), larger mold space for easier changes, even clamping force distribution • Injection unit: Hydraulic, high-performance plasticizing; suitable for thick-walled or large-volume parts • Typical applications: Automotive components (e.g., bumpers, dashboard elements), large housings and covers, industrial parts, thick-walled technical components • Advantages: High clamping force for large parts, more compact than traditional tie-bar machines, stable industrial design, easy to automate Additional equipment • Not specified/included in the provided information

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Turning diam. : 140 mm Turning length : 700 mm In General: Max. workpiece diameter:140 mm Chuck diameter:250 mm Max. turning length:700 mm Track I: Tool carrier I:Tool turret (X/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track II: Main spindle (OP10):Travelling direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:772 mm C-axis:0.01° Position sensor (W):Direct scale : Sub-spindle (OP20):Direct drive spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:2+2-jaw power chuck Clamping cylinder:Hydraulic clamping cylinder C-axis:0.01° Track III: Tool Carrier II:Tool turret (X/Y/Z) Tool drive:9,600 rpm, 44 Nm Tool holder:BMT Number of stations:11 + 1 Part gripper X-axis:310 mm Y-axis:50 mm mm) Z-axis:1,115 mm Position sensors (X/Z):Direct scales Track IV: Main spindle (OP30):Travelling motor spindle Speed:5,000 rpm Power:33.9 kW Torque:231 Nm Chuck:Collet chuck Clamping cylinder:Hydraulic clamping cylinder Support control:Pneumatic W-axis:988 mm C-axis:0.01° Position sensor (W):Direct scale : Tailstock:Fixed arrangement Quill:Hydraulic with position control Track V: Tool Carrier III:Milling/turning turret (X/Z) Tool drive:1,000 rpm, 240 Nm Tool holder:HSK-63 Number of stations:5 + 1 Part gripper X-axis:310 mm Z-axis:1,115 mm Position sensors (X/Z):Direct scales Automation: Feed conveyor:O-type, 18 base carriers Discharge conveyor:O-type, 18 base carriers Part transfer:3 grippers on tool turret Max. workpiece diameter:140 mm Max. workpiece height:630 mm Workpiece weight:max. 20 kg Equipment: Position measurement systems:Direct (glass scales) Chip removal:Chip conveyor Workpiece measurement:Renishaw OMP Coolant supply:Internal coolant with filter, 17 bar Coolant temperature control:Immersion recooler Emulsion mist separator:Mechanical Software option I:Turning/milling operation Software option II:Automatic retraction Rjdsy A U I Iopfx Afgscb Software option II:Sister tool management

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar Rsdpeyz Tqrsfx Afgjcb - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Condition: ready for operation (used), Year of construction: 1988, Two similar Karl Mayer warp knitting machines are available. 1) Karl Mayer KS 3, year of manufacture: 1988, working width: 130 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66H-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-VP19, speed: 1500, yarn monitoring: Laser 4080, fabric monitoring: Scanner 5090. 2) Karl Mayer KS 3, year of manufacture: 1986, working width: 84 inch, gauge: E28, yarn feed: FAG GB1-2-3, latch needles: L-28-66/3-49, guide bars: SPEC.51.50.G.104, sinker: P-28-66-V-3-19, speed: 1300, yarn monitoring: Laser 4080. An on-site inspection is possible. Rcsdpfx Aeyz An Tsfgsb

Condition: good (used), I offer here a set from Schechtl Rodpfx Aeudbzmjfgjcb Folding bench KS with foot closer and guillotine shear HT 150 Both have a capacity of 1.5mm iron - aluminum significantly more Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2018, loading space length: 13,390 mm, loading space width: 2,490 mm, loading space height: 2,590 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,910 mm, color: white, Year of construction: 2018, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: SAF Brakes: disc brakes Suspension: air suspension Rsdpfxeyyl Tce Afgjcb Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 3: Max. axle load: 9000 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Weights Empty weight: 10.040 kg Carrying capacity: 31.960 kg GVW: 42.000 kg Functional Tail lift: Dhollandia DHSMT.30, slider lift, 2500 kg Make of bodywork: VeDeCar Thermo King SLXi Spectrum Cooling engine: diesel and electric (4396 operating hours diesel; 5 electric) Wall thickness: 50 mm Maintenance, history and condition Number of owners: 3 APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 1999, Manufacturer: WEGOMA Model: KS 2400 Category: Edge sanding machine Year of manufacture: 1999 Rcsdpjyza Ahefx Afgjb Table width: 300 mm Table length: 730 mm Total units: 1 Max. sanding belt width: 150 mm Sanding belt length: 2,400 mm Main motor: 1.85 kW Sanding sleeve Round sanding support Oscillation Height adjustment: Table, manual Sanding belt tiltable: Yes Required length: 1.7 m Required width: 0.8 m Required height: 1.5 m Location: ex-stock 54634 Bitburg - immediately available - Subject to prior sale

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer. Rjdpfevqbhljx Afgscb

Condition: excellent (used), functionality: fully functional, We offer the Vortex D2 Duo – a fully automatic cook, quench & chill machine designed for the continuous and repeatable cooking, quenching, and chilling of food products. This solution features a DUO design, in which the cooking section is mounted on a separate frame from the quenching and chilling sections, ensuring a very high level of separation between high-temperature and low-temperature processes. The Vortex D2 Duo model was developed primarily for processing short and long pasta, but thanks to its versatility, it is also ideal for products such as rice, noodles, legumes, grains, vegetables, potatoes, and seafood. As a result, the machine can operate in both pasta and ready-meal production facilities, as well as in modern convenience food plants and among producers of salads and chilled components. The Vortex D2 Duo has a capacity ranging from approximately 250 kg/h to 4000 kg/h, allowing the system to handle both medium and very high production volumes. The Vortex is equipped with a programmable Vortex water flow system, which ensures uniform cooking, cooling, and chilling of each product batch. This system minimizes clumping, product damage, and yield losses, and its highly efficient cooling typically achieves a product temperature of approximately 3°C. Redsy Df Nropfx Afgjcb The Vortex D2 Duo can operate with conveyor feeding or with automatic batch loading of product into containers, which facilitates precise control of throughput and process organization. Additionally, vibrating dewatering conveyors enable operation in both batch and continuous modes, allowing the line to be easily adapted to subsequent production stages such as mixing, dosing, packaging, or final cooling. Also noteworthy are design solutions that enhance process quality and hygiene, such as hydraulic basket lifting, shell-and-tube heat exchangers, double degreasing overflows, and specially shaped water tanks. Hygienic, stainless steel construction and washdown-ready protection, which is of great importance in facilities operating under high sanitary standards. Key advantages of the Vortex D2 Duo separate frames for the cooking and cooling sections, high-quality separation of high- and low-temperature processes, ideal for short and long pasta, as well as rice, vegetables, potatoes, grains, pulses, and seafood, capacity up to 4000 kg/h depending on configuration, programmable Vortex water flow system, highly effective product cooling to approximately 3°C, capability for batch and continuous operation, hydraulic basket lifting and efficient drainage, hygienic, industrial design for continuous operation. Vortex D2 Duo is an advanced production line for manufacturers seeking consistent cooking, rapid cooling, high throughput, and excellent final product quality in a modern pasta and convenience food production process

Condition: used, overall weight: 35,000 kg, first registration: 12/2017, loading space length: 13,600 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, Equipment: ABS, Schmitz semi-trailer First registration: 12/2017 Multi Temp Double-deck Floral width: 249 cm Internal height: 270 cm Pallet box Tail lift/loading ramp Refrigeration unit: Schmitz Rodpfx Asy Acnvofgjcb Multi Temp Unit: Diesel Std 6900 Phone: We are happy to assist with your financing or leasing EU sale: net price with company documents and VAT number VAT deposit: €2,000 We speak English. We speak Serbo-Croatian. Our service for you: - Customs number plates - Export documents and EUR1 - Worldwide transport - Overnight stay options - Transfer from Munich airport or Passau train station Phone:

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 64246, overall weight: 428 kg, volume flow: 120 m³/h, operating pressure: 10 bar, usable tank capacity: 300 l, Equipment: refrigerant dryer, No minimum price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nPower: 22 kW\n\nOperating pressure: 10 bar\n\nTank capacity: 300 l\n\nEQUIPMENT\nDryer\n\nExternal reference: MGO015 Rcsdpfx Aeyznrqofgeb

Condition: good (used), Year of construction: 1996, Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: RSA, Deburring machine type Deburrer DUO Rcedpfoyw Sirjx Afgob -Drive: 2.4/3.7 kW / 1500/3000 rpm -Brush: Ø 255 mm -Brush width: -Dimensions: 440/945/H1185 mm -Weight: 277 kg

Condition: new, Year of construction: 2022, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 456516, overall weight: 255 kg, load capacity: 20 kg, arm reach: 2,010 mm, This is a new KUKA KR 20 R2010 KS-F/SEL industrial robot with a KRC5 Dualcab AC SPB controller, year of manufacture 2022. The robot includes the following options: KUKA.ActivationManagmentTool KUKA.Platform DiagnosisServiceEtherCat Redpfsw Dquasx Afgjcb ExpertTech GripperSpotTech KUKA.BoardPackage KUKA.DeviceConnector pre-installed KUKA.PROFINET MS KUKA.SoftwarePackage smartPAD-2 KUKA.UpdatePackageFirmware KUKA.UpdateService KUKA.UpdateServiceConfiguration LoadDataDetermination OrangeApps.UserLogonUSB SafeOperation UserTech

Condition: used, Rotary vane vacuum pump 2 stages Condition: Inside and outside absolutely as good as new, reconditioned and newly painted Warranty: 12 months Manufacturer: Pfeiffer Type: DUO 120 Rsdpfx Afectlpvegscb Motor: 400V DS Operating medium: mineral oil Included: Instruction manual Oil mist separator optional Delivery time: on request Photo will be posted later.