Used Lami Nova P 2600 for sale (41,949)

Condition: used, axle configuration: 2 axles, first registration: 10/2015, loading space length: 630 mm, loading space width: 2,490 mm, loading space height: 1,000 mm, suspension: air, tire size: 425/65R22,5, wheelbase: 2,000 mm, Year of construction: 2015, Equipment: crane, General information Mileage: 328.349 km Drivetrain Drive: Wheel Axle configuration Tyre size: 425/65R22,5 Suspension: air suspension Rear axle 1: Steering Weights Empty weight: 11.800 kg Carrying capacity: 26.200 kg GVW: 38.000 kg Dodpjy Duf Aefx Ad Nskl Functional Mast: telescopic (4 parts) Make of bodywork: PALFINGER PK 26002- EH C Tipper: Back

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB IRB2600-12/1,85 Demo Robot 2019 Full of options +-7 hours DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Djdpfx Adjxq Ttio Nokl

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Dsdjx Rqkuspfx Ad Njkl Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: excellent (used), CATALOG NUMBER 7915 TECHNICAL DATA cutter head width: 640mm number of knives: 4 pcs max thickness of processed element: 200mm – top: anti-kickback fingers/ejectors serrated infeed roller, powered pressure unit planing cutter head pressure unit smooth outfeed roller, powered – bottom: adjustable rollers in lower table: 2 pcs motor: 7kW variable feed speed control Dimensions (LxWxH): 1800x1250x1150mm Dedpfx Adjyrrzps Nekl weight: 1250kg ADVANTAGES – Made in Bulgaria – Variable feed speed control – Used thickness planer in very good condition Net price: 9500 PLN Net price: 2260 EUR based on 4.2 EUR rate (Prices may vary with major fluctuations)

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, total height: 2,163 mm, total width: 1,945 mm, controller manufacturer: FANUC, controller model: i Series, product length (max.): 3,873 mm, number of axes: 4, This 4-axis DOOSAN Puma 2600YB II was manufactured in 2019. It features a maximum turning length of 725 mm and a swing over bed of 780 mm. The machine is equipped with a FANUC i Series controller and includes 12 turret stations for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600YB II machine we have for sale. Contact us for further details. • Working hours: 4436 h • Parts count: 305 • Swing over bed: 780 mm • Swing over carriage: 630 mm • Max turning length: 725 mm • Bar capacity: 102 mm • Spindle nose: ASA A2#11 • C-axis indexing: 0.001 degrees • Turret stations: 12 • Driven tool speed: 5,000 rpm • Rapid traverse (X/Z): 30 m/min • Tailstock taper: MT#5 Additional equipment • Chip conveyor • Tool setter • Manuals • CE Declaration Technical Specification Djdpfx Adsy A N Dqo Nokl Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2019, CNC lathe DOOSAN Puma 2600SY II with Siemens control; Thermal sensors for highest precision; Y-axis; Sub-spindle with collet chuck; Spindle bore 80 mm (main spindle); All axes are flat guideways – suitable for heavy-duty machining; Chip conveyor, tool setter, parts catcher with belt, coolant gun, extraction system; 70 bar high-pressure coolant system; Various fixed and driven tool holders. Dksdpfx Adoy Amfls Nol

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,163 mm, total length: 3,560 mm, total width: 1,945 mm, turning diameter over bed slide: 780 mm, overall weight: 6,550 kg, bar passage: 81 mm, Equipment: documentation/manual, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with a Y-axis, main spindle, and sub-spindle, ideal for complete machining operations in a single setup. The machine is fitted with a bar feeder and numerous accessories, is fully operational, and can be seen running by appointment. The lathe is in excellent operating condition, regular maintenance has been performed, and it can be demonstrated in idle mode by appointment. Included accessories: Dkedpfx Asymdt Tjd Nol . Top Automazioni bar feeder model X-Files S380SX . Chip conveyor . Tool presetting system . Bellegrandi collet chucks on main and sub-spindle . Workpiece pick-off arm with conveyor belt . Static and driven tool holders

Condition: excellent (used), Year of construction: 2022, For sale: industrial chiller unit from the reputable manufacturer HYFRA, designed for cooling water or process fluids in industrial installations. The unit is in very good visual condition and was manufactured in 2022. It has been professionally dismantled, is complete, and ready for recommissioning after connection. Technical data (from the nameplate): • Model: SIGMA7-S-P • Cooling capacity: 6.9 kW (conditions: 32°C / 20°C) • Year of manufacture: 2022 • Refrigerant: R410A (GWP 2088) • Refrigerant quantity: 1.0 kg (CO₂ eq. 2.1 t) • Power supply: 3 / PE, 380–415 V ±10%, 50 Hz • Rated current: 8.20 A • Rated power: 4.70 kW • Max. ambient temperature: +42°C • Max. pressure (HP): 42 bar • Protection: 16 A • Weight: - dry: approx. 180 kg - filled with water: approx. 300 kg Features / equipment: • Integrated air-cooled condenser • Comprehensive safeguards (pressure, flow, temperature, antifreeze protection) • Clear error code list on housing • Robust, industrial-grade construction • Connection stubs – visible in the photos • European manufacture, CE certification Applications: • CNC machines • Injection molding machines, extruders Dkedpfx Aoyc H Irod Nel • Production lines • Process cooling • Plastics, metal, chemical industries

Condition: used, mileage: 639,800 km, power: 331 kW (450.03 HP), first registration: 07/2015, fuel type: diesel, empty load weight: 13,200 kg, maximum load weight: 12,800 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,200 mm, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, Scania G450 6X2 Tractor Unit with Crane First registration: .800 KM with documentation CR19 long-distance driver’s cab with single bed Automatic transmission Dodeyzg Nzepfx Ad Nskl Air conditioning, auxiliary heater, parking air conditioning Adaptive cruise control, lane keeping assist Air suspension on front and rear axles 3rd axle liftable Tyres: 365/55 R22.5 approx. 50% tread Tyres: 315/70 R22.5 approx. 50% tread Wheelbase: 3200 mm Unladen weight: 13,200 kg Palfinger PK 26002 Crane Year of manufacture: Operating hours: only 1,512 !!! Radio remote control Rotator 5 hydraulic extensions Max. capacity: / 7,800 kg 4.10 m: 5,200 kg 6.10 m: 3,450 kg 8.20 m: 2,500 kg 10.20 m: 1,900 kg 12.20 m: 1,540 kg 14.20 m: 1,300 kg Hook height approx. 18 metres German vehicle in well-maintained condition. TÜV valid until 09/2026 Export/net price: €65,900 All details without guarantee, errors excepted.

Condition: used, mileage: 639,800 km, power: 331 kW (450.03 HP), first registration: 07/2015, fuel type: diesel, empty load weight: 13,200 kg, maximum load weight: 12,800 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,200 mm, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, Scania G450 6X2 tractor unit with crane First registration: .800 KM with documentation CR19 long-distance cab with one bed Automatic transmission Air conditioning, auxiliary heating, stationary air conditioning Adaptive cruise control, lane departure warning system Air suspension front and rear 3rd axle liftable Tyres 365/55 R22.5, tread approx. 50% Tyres 315/70 R22.5, tread approx. 50% Wheelbase 3200mm Empty weight 13,200 kg Crane: Palfinger PK 26002 Year of manufacture: Operating hours only 1,512!!! Radio remote control Rotator 5 hydraulic extensions max: 7,800 kg Dodpfxjyzg Nus Ad Nskl 4.10 m: 5,200 kg 6.10 m: 3,450 kg 8.20 m: 2,500 kg 10.20 m: 1,900 kg 12.20 m: 1,540 kg 14.20 m: 1,300 kg Hook height approx. 18 meters German vehicle in well-maintained condition. TÜV valid until 9/2026 Export / net price: €65,900 All information provided without guarantee. Subject to errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 361 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, Equipment: UVV, lighting, sideshift, Description & Special Features: New tyres, good battery with 70% capacity, side shifter, half-cab (ideal for outdoor use), front windscreen Note: The forklift is in very good condition. Dodpfxsyzyxpe Ad Nokl The unit is currently located at our site in Bad Krozingen. Transport to your location can be arranged at an additional cost. An invoice with VAT shown separately will be sent to the buyer, and the listed prices are net. By placing a bid, the buyer accepts the terms and conditions of sale.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Dsdevrd E Ajpfx Ad Njkl Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Built-in compressor for high-pressure laminating rollers. Auto-control for miss-sheet detection and quality control. Large roll film capacity. (up to 3,000 m) In-line sheet separation. Delivery into a paper jogger 220/240 volt - 50Hz

Condition: new, Year of construction: 2026, CNC-controlled electric motor-driven precision sheet metal folding machine / swivel bending machine Maximum bending length: 2,600 mm Maximum bending capacity with a 25 mm wide bending rail: - Steel sheet DC01-A with a tensile strength of approx. 350N/mm² or material S235JR: 3.5 mm Dkodpfsy Afurex Ad Njl - Stainless steel sheet 304L: 2.3 mm - Aluminium sheet H24 with a tensile strength of approx. 145N/mm²: 4.5 mm - Zinc sheet according to DIN EN988 with a tensile strength of approx. 190N/mm²: 2.3 mm Upper beam rail: 160° Upper beam stroke up to 240 mm Lower beam height approx. 830 mm Drive power: 9 kW Dimensions without rear gauge approx. 4.1 x 1 m x height 1.9 m Weight: 3,500 kg - Manual crowning device for the folding beam - Rear gauge with 8 folding stop fingers - Stop range 10 to 750 mm (optionally 1,000 mm or 1,500 mm), Adjustable travel speed up to 500 mm/sec.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 140 kg, LPG Systems LPG Cellu M6 Endermolab 1I or opt. 2I Beauty and Therapy Device Body and Facial Device (new) Endermo Lift (Ergo Lift) Latest world patent for facial treatments Tested by certified trainer (Beauty and Therapy) Completely refurbished and overhauled Recently serviced New hose Overhauled KM80 Roll Head from 2013 New KM70 Roll Head or Therapy Head TR50 New KM50 Roll Head New controller from previous owner Device has been recently overhauled New valves, seals, and hose New capacitors, new filters, etc. Original price: €39,980 net Suitable for Endermologie Body and Endermologie Face treatments Dkodpocgy Hdjfx Ad Nsl Optional upgrade to Ergo Lift patent 2014 for an additional €2,000 Lipo-massage and Endermolift technology performable Like new and immediately available in Germany Optional delivery and commissioning according to LPG manual specifications Optional starter package (bodywear, filters, claps, flyers) A premium device in the upper class of the Medical Beauty segment! No low-quality devices like ultrasound or radiofrequency products from China— Ergodrive, Ergo Lift included 12-month warranty from date of purchase, valid only with a 2-day training course including final exam Start your Endermologie season now! 100% natural mechanostimulation ensures a painless yet intensive treatment. A highly addictive procedure. Customers seek to strengthen and firm connective tissue, reduce cellulite, and men seek abdominal firming. My clients generally lose 2 dress sizes, and it has been scientifically proven to stimulate metabolism. Hooded eyelids and double chin can be positively affected with Endermolift. This patented procedure is as precise as a Swiss watch. For the past 18 years, I have used and traded older LPG pre-owned devices; the results of the latest generation led me to add the latest Integral and its sister model Endermolab as well as the Alliance model to my offering. We support you with application questions even after purchase. Facts about LPG 40 years of experience Worldwide market leader in the medical beauty segment European company 175 documented clinical and scientific studies 80,000 devices produced 100 countries presence 12 million treatments performed 200,000 treatments daily Leasing available through our partner bank E.g. from €399 per month Images for reference—constantly new devices available We value our customers even after the sale! Nationwide references available Doctors, therapists, beauticians, etc.

Condition: new, Year of construction: 2026, total length: 600 mm, total width: 600 mm, total height: 1,400 mm, warranty duration: 12 months, overall weight: 300 kg, input voltage: 400 V, power: 1.5 kW (2.04 HP), pressure: 9.8 bar, tank capacity: 50 l, HySpriz RK50U 3-in-1 Forming System for Meat Snacks, Pet Sticks & Mini Salami | Up to 1500kg/shift Made in Ukraine. 18 month full warranty. RK50U — universal casing-free forming system for meat sticks, jerky & sausage production HydroShpriz RK50U is a powerful piston-driven filling and forming machine engineered for small and mid-size manufacturers starting production of meat sticks, salami snacks, pet food, kibbeh, fruit bars, and more. Ideal for dry-cured snacks without alginate casing. Strong, compact, and easy to operate — it’s the perfect choice to start your line and grow with Trade-In options. ⸻ Technical specifications • Drive: hydraulic piston • Piston force: 94 kN • Power: 1.5 kW, 380 V, 50 Hz • External dimensions: 1050×550×950 mm • Weight: approx. 300 kg • Material: full stainless steel, food-grade • Certification: CE certified, built for continuous 8-hour production cycles ⸻ Configuration & possibilities • Gearbox-driven filler for thick and sticky emulsions down to –2 °C • Multi-nozzle head: up to 25 lanes simultaneously • Round nozzle set: 8 mm to 22 mm for meat or fish sticks • Flat nozzle set: 25 mm to 200 mm width, 3–5 mm height — ideal for jerky/strips • Sausage stuffing set: for traditional casing sausages • Overhead tray holder: for direct forming onto drying racks • Trolley integration: fits perfectly with our 30-row drying racks (60 trays) • Integrated time-based portioning unit with ±8% accuracy • 24V remote signal: compatible with automatic clippers (PolyClip, Compa, etc.) • Optional vacuum connection: for better product density and shelf-life ⸻ Production capacity • From 20 kg to 1,600 kg per 8 hours depending on product shape, tray format and nozzle type ⸻ Availability ✔️ In stock at official distributors in: • Austria Dkedpfx Adsmrpvyo Nol • Poland • United Kingdom • Lithuania • Australia • South Africa • United States Delivery worldwide. Training, test batch, and spare parts included. ⸻ Made in Ukraine. CE sertified industrial forming system • meat snack production • pet food production • jerky, salami, kebab machine • food processing equipment

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, bending force (max.): 80 t, control type: CNC control, actuation type: hydraulic, CNC hydraulic press brake ERMAK CNCHAP 2600 x 80, year of manufacture 2006, in good and immediately operational condition. This robust and reliable press brake is designed for precise bending operations on sheet metal up to approx. 6 mm across a maximum working width of 2600 mm. The machine features a pressing force of 80 tons and is equipped with CNC controls, allowing bending programs to be easily entered and repeated. The CNC-controlled backgauge (X and R axes) and synchronized hydraulic cylinders ensure high repeat accuracy and consistent bending quality. Dkodpfxsywhf Aj Ad Nsl With a stroke of approx. 180 mm, a throat depth of approx. 400 mm, and a distance between uprights of about 2050 mm, this press brake is suitable for a wide range of bending applications. The machine is powered by a robust 7.5 kW hydraulic drive and features a solid construction with a weight of approx. 5,600 kg, ensuring stability during production. Additionally, the machine is equipped with safety devices such as light curtains and a foot pedal with emergency stop. The combination of user-friendly CNC controls, solid build, and reliable performance makes this ERMAK press brake ideal for both workshops and industrial applications. Includes cart with tooling, machine installation can also be arranged.

Year of construction: 1997, condition: used, We offer this used dowel drilling machine P. BACCI, year of manufacture 1997. Model: Serial number: 2826 Dkedpfx Aeyx S Uked Nol Year of manufacture: 1997 Voltage: 380 V Frequency: 50 Hz Power: kW Weight: 370 kg If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Year of construction: 2000, condition: used, We offer this used machine P. BACCI TSG 2T, year of manufacture 2000. Model/Type: TSG 2T Serial number: 3074 Year of manufacture: 2000 Voltage: 380 V Frequency: 50 Hz Motor power: 3.75 kW Weight: 970 kg If you have any questions or require further information, please do not hesitate to send us a message or call us. Dedpfxoyx S T Te Ad Nskl

Condition: used, Year of construction: 2001, power: 25 kW (33.99 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 5,000 kg, We offer this used P. BACCI DOUBLE vertical woodworking machining centre, year of manufacture 2001. Model: DOUBLE Serial number: AB001 Year of manufacture: 2001 Voltage: 380 V Frequency: 50 Hz Dkedpfx Adsyx S Svo Nsl Power: 25 kW Weight: 5000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1997, condition: used, functionality: fully functional, We are offering this used contouring machine P. BACCI FC8-2500, year of manufacture 1997. Manufacturer: P. BACCI Model/Type: FC 8-2500 Dkodpfx Aoyx S Sced Nel Serial number: 1346 Year of manufacture: 1997 Voltage: 380 V Frequency: 50 Hz Power: 30.5 kW Weight: 5100 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Dodsy D E Riepfx Ad Njkl Chuck: 12 inch Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: used, 2 Farben Offsetdruckmaschine / 2 Color Sheet-Fed Offset Press PM-QM46-2 N+P Djdpoyv A S Uefx Ad Njkl Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 6,597 h, load capacity: 5,000 kg, lifting height: 4,450 mm, free lift: 840 mm, fuel type: diesel, mast type: simplex, construction height: 3,250 mm, fork carriage width: 1,260 mm, fork length: 1,360 mm, empty load weight: 8,700 kg, total length: 4,600 mm, drive type: Diesel, construction width: 2,200 mm, Side loader Load center: 700 Fork width: 160 mm Fork thickness: 65 mm Mast type: Standard Condition: Ready for use and fully operational Technical condition: Very good Front tire type: Pneumatic Front tire size: 27x10-12 Rear tire type: Pneumatic Rear tire size: 27x10-12 Description: In addition to this Battioni Pagani model, we have approximately 200 heavy-duty forklifts, compact forklifts, forklift trucks and side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Leasing and financing on favorable terms are always possible. We are also happy to purchase your used machine directly, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly advise you in detail about this HT5KU. P.S.: Our master workshop specializes in the repair, maintenance, overhaul, and custom manufacturing of forklifts from 8 tons upwards. We can also offer your vehicle for sale with us on consignment. 1x NIVO fork; telescopic forks 1360 / 2360 mm Dsdpfx Aewttrgjd Nekl Heater, full cabin, Platform height: 820 mm

Condition: good (used), Year of construction: 2009, Ref: 11073 . 2009 AL-MEISTER PLS3310 Pluster Laminator 350mmx500mm single sided laminator for a wide variety of stock. Features: Very user friendly Dedpfxjymz N Sj Ad Nskl Cost saving, optimized efficiency Paper feeding, laminating and separating all in one go. Pluster ‘s unique feature is that the film setting information is stored for future reproduction. Fujipla's accumulated laminating technology provides excellent quality. Offset & digital printing on demand can be perfectly laminated with Fujipla's special SAP film. The most compact machine on the market with the lowest noise level. Can be used anywhere, from factories to office spaces or small areas. Specification: Processing Speed: 1.0-5.0m/min. (*1) Warm-up Time: Approx. 15-30min. (*2) Temperature Range: Ambience, 60-130°C Feeder Max. Load: 100mm Paper Thickness: 115-300g/m2 Max. Paper Size: 350mm(W) × 500mm(L) Min. Paper Size: 318mm(W) X 450mm(L) Power Consumption: 1.0kw / 6A Power Source: AC220-240V Net Weight: 151.6kg

Condition: like new (used), Year of construction: 2022, 3-Axis CNC Lathe Type: Puma GT 2600 LM Manufacturer: Doosan Year of manufacture: 2022 New Fanuc i Series Plus touch control 12-inch Samchully hydraulic chuck Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Spindle bore: 81 mm Spindle speed: 3500 rpm Turret: 12 positions BMT 55 Dkjdpfoywthvsx Ad Nel Driven tool speed: 5000 rpm X: 265 mm Z: 1100 mm C: ±360° LNS chip conveyor Tool probe MT5 tailstock Including: 4 driven tool holders 2/2 8 standard tool holders Total: 12 pcs Documentation Machine as new, only 1,800 operating hours Available for inspection in our warehouse