Used Lauber Chamber Dryer for sale (3,583)

Condition: used, Year of construction: 1994, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Psdpfxjy Tt Eae Afgspt Mühlböck QLSF External dimensions: Length: 10.3 meters Width: 4.2 meters Height: 4.15 meters Internal dimensions: Length: 10.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1994 Inlet temperature: 95 degrees Fans: 7 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: used, Year of construction: 1995, Drying chamber / Recirculating air drying chamber / Wood drying chamber / Drying system Mühlböck QLSF External dimensions: Length: 13.3 meters Width: 4.2 meters Height: 4.15 meters Internal dimensions: Length: 13.1 meters Width: 3.01 meters Height: 4.0 meters Technical data: Year of manufacture: 1995 Heating capacity: 205 kW Ppedpey Tt Axofx Afget Supply temperature: 90 degrees Water flow rate: 16 m3/h Fans: 9 x 0.75 kW Immediately available Location: Austria, near Ried im Innkreis

Condition: good (used), functionality: fully functional, filter area: 23 m², filter pressure: 10 bar, total width: 1,000 mm, total length: 4,000 mm, total height: 1,400 mm, empty load weight: 800 kg, operating temperature: 20 °C, number of chambers: 46, Functional plate and frame filter press for sale, plate size 50x50 cm, 45 plates with functional filter cloths. Pedjy S Srcopfx Afgspt The filtered medium was cold-pressed vegetable oil.

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) ON TANK Psdpfoy Twahox Afgept DOCUMENTS YES CONNECTION NEW/USED USED

Condition: used, Year of construction: 2015, Dimensions (L/W/H) ca. 4020 x 2460 x 2600 mm total power requirement 78 kW filling amount 1200 l carrying capacity max. 0,5 bath temperature 65 °C heating capacity 54 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery Ppodoy Sbmiopfx Afgot if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2018, condition: like new (used), Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Ppodpfx Afey T Ibvogst Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Ppjdeyb Rpdspfx Afgjt The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Ppsdpfoy Sl Uqsx Afgot Deviations from the technical data as well as errors in the article description are possible and subject to change.

Year of construction: 2006, condition: good (used), Airpress screw compressor with dryer Bar: 10 Tank: 200 L Pedpfx Afoi Eq D Dsgjpt Year: 2006

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 700 mm, total length: 2,600 mm, total height: 2,300 mm, We offer this used Orwak Compactor 5070 3 chamber waste packing press, year of construction 2012. Type: Compactor 5070 Product number: 4905070-00 Serial number: 108362 Manufacturing date: 2012-10 Weight: 522 kg Voltage: 230 V Frequency: 50 Hz Power: 1.1 kW Current: 10 A Temperature range (standard oil): +5 to +40 °C Temperature range (special oil): -10 to +40 °C Suitable for minimizing bulky waste: plastic, cardboard, paper. 100% functional, demonstration in operation available. Ideal machine made in Sweden for maintaining order in waste management. Podjy Sxd Eepfx Afgopt If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, Equipment: documentation/manual, Tesoma Compact-Eight-G-18-HH-SR - Conveyor Dryer (Gas Connection) Air and Exhaust Data Duct diameter: 150 mm Exhaust airflow: approx. 900 m³/h Temperature: max. 180 °C Pressure drop: max. 100 Pa Pedpfx Aey Ry U Nsfgept Fresh air supply: approx. 1,800 m³/h (total) Dimensions & Weight Dimensions (L x W x H): 10,900 x 2,840 x 1,142 mm Total weight: 4,000 kg EQUIPMENT Documentation/manual Exhaust stacks (double-walled stainless steel, approx. 7.5 m each) Ideally suited for digital print products (DTF, transfers). Price includes double-walled stainless steel exhaust stacks (approx. 7.5 m each). The machine is installed and connected. It can be inspected on site by appointment. Price is negotiable and applies only to the as-installed system. Price does not include dismantling, reassembly, or delivery costs. On request, a contact can be provided who can organize dismantling, transport, and installation if needed.

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control Podpfx Afofzq Stegept • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches Ppjdpfsflmdbsx Afgot • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. Ppedpfxsfy T Szs Afget The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. Podpfx Afefz U Hvsgept To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: good (used), KÖHLER Corrosion Test System HK-400 Ppedpfx Afsy N R Tasgjt Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)

Condition: excellent (used), Year of construction: 2011, 386 USED Koma CDS Refrigerator, Proofing, and Freezer. EXTERNAL DIMENSIONS (in cm): - height 258, - width 265, Ppodpfx Afoy Thc Tsgjt - length 420. INTERNAL DIMENSIONS (in cm): - height 200, - width 200, - length 355. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2018, 385 USED Lilnord Refrigerator-Proofer. NOTE: Unit without control panel. EXTERNAL DIMENSIONS (in cm): - H: 249, - L: 350, - W: 197. INTERNAL DIMENSIONS (in cm): Pedpfx Ajy Tg Smofgjpt - H: 198, - L: 225, - W: 160. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, comprises: 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. CEFLA TR 3000 Roller Conveyor Heating medium – electric Installed electrical power for both dryers: approx. 210 kW --- 1. CEFLA FEV E Dryer: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW The in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is equipped with a laminar hot air flow directed opposite to the panel feed direction and features adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h (heating register 90 kW) --- 2. CEFLA FEV EU Dryer: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW The in-line hot air dryer is suitable for rapid evaporative and curing processes. This dryer is equipped with a laminar hot air flow in the opposite direction to the panel feed with adjustable recirculation air. • Total length: 7,500 mm • Working width: 1,300 mm • Total width: 1,783 mm • Max. drying height: 1,780 mm (conveyor excluded) • Useful pass-through height: 80 mm • Installed electrical power: 115 kW • Solvent-laden air exhausted externally: 0–4,000 m³/h • Machine control via 5.7" LCD touch panel • VS spark-proof supply/recirculation fan: – Power: 2.2 kW – Flow rate: 40,000 m³/h – Output electrical power: 1.5 kW – Supply air into room: 0–4,000 m³/h – Installed heating capacity: 76,400 kcal/h • PR antifreeze protection system for one heating register, with probe and automatic damper control --- 3. CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Pedpfew H Aw Ssx Afgopt Drum cooling tunnel with air knives is highly efficient for achieving increased heat exchange due to high air velocity. The air handling unit consists of: - Supply and recirculation fan: 3 kW; Flow rate: 6,000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6,000 m³/h - Digital ventilation setting via touchscreen - Air knives installed across the entire tunnel width - Air knife exit speed max. 32.5 m/sec • Total length: 3,000 mm • Useful width: 1,300 mm • Total width: 1,783 mm • Pass-through useful height: 80 mm • Max. tunnel height: 1,780 mm (conveyor excluded) • Installed electrical power: 4.5 kW • Machine control via 5.7" LCD touch screen • TT 4000 bar conveyor with double chain, steel guides and chrome-plated bars --- 4. CEFLA TR 3000 Roller Conveyor • Powered rollers with PVC coating • Length: 3,000 mm • Photoelectric sensor for thin panels, thickness 4 mm (Specifications subject to change and errors excepted; prior sale reserved)

Condition: excellent (used), Year of construction: 2015, 384 USED Koma CDS Refrigerator, Proofing and Freezing Unit. TECHNICAL DATA: - Operating temperature range: -10°C to +30°C. EXTERNAL DIMENSIONS (in cm): - height 258, - width 265, - length 420. Ppodoy Tg Rvopfx Afget INTERNAL DIMENSIONS (in cm): - height 200, - width 200, - length 356. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, working width: 1,250 mm, pass-through height: 80 mm, UV System Venjakob - IST LIGNOCURE HL 140-4-N-DL Year: 1999 (1990) POLYMERIZATION SYSTEM. Consists of 2 UV dryers: Ppodpjyalc Nsfx Afgjt Dryer 1 Overall length: 2100 mm Overall width: 2339 mm Workpiece sizes: min. 250x20 mm, max. 2500x1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: each lamp 80 W/cm² Radiation length: 1400 mm Lamp power: 2 x 11.2 kW Air-cooled housing, output: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Belt conveyor Venjakob, year 1999, type Novo 40 Length: 2100 mm Working width: 1300 mm Working height: 880 - 920 mm Feed: 0.75 kW Feed speed: 4 – 20 m/min (line 2 - 4 m/min) Dryer 2 Overall length: 3340 mm Overall width: 2339 mm Workpiece sizes: min. 250x20 mm, max. 2500x1000 mm Workpiece height: max. 60 mm 1 module with 2 elliptical reflectors (2 UV lamps) Electrode spacing of IST lamps: 140 mm Rotating reflectors Lamp rating: each lamp 80 W/cm² Radiation length: 1400 mm Lamp power: 2 x 11.2 kW Air-cooled housing, output: 1600 m³/h (motor 1.2 kW) Compressed air consumption: 6 NL/h Belt conveyor Venjakob, year 1999, type Novo 40 Length: 3340 mm Working width: 1300 mm Working height: 880 - 920 mm Feed: 0.75 kW Feed speed: 4 – 20 m/min (line 2 - 4 m/min) Common control cabinet for both drying tunnels: 2000 x 1600 x 600 mm Operating voltage: 400 V, AC, 50 Hz, 3-phase Total power consumption of the complete UV system approx. 50 kW Operating side of the system: left Total weight of the complete system: approx. 2500 kg (Technical data subject to change and errors excepted. Prior sale reserved.)

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Granulate drying plant + Multi-hopper system SOMOS D200 Pjdpfx Ajy R Rumjfgjpt Year of manufacture: 2010 10x hopper Including electrical wiring diagram and operating manual

Condition: used, - Manufacturer: Venjakob - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h Podpfx Afsy Ragfegopt - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: good (used), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Psdpfx Aey N Awqefgept Model: PL-3KPH Design: Air-cooled temperature and climate test chamber For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: Air-cooled No external water connection required Refrigerant as per label: R452A – approx. 1.2 kg Features: Touchscreen control Programmable and constant operation modes Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / chamber lamp Side cable/pipe port, approx. Ø 100 mm Overheat protection Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connection Condition: Used machine with signs of age and use. Partial rust and corrosion present in the lower housing area. Interior with usage marks. See images for visual condition. Scope of Delivery: ESPEC Climate Test Chamber PL-3KPH One shelf included Delivery as shown Service: Function check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Documented test run Notes: Inspection possible by arrangement. Loading can be organized. Commercial sale – Sold as-is without warranty. Subject to change and error.

Condition: good (used), Feutron Temperature Test Chamber: -40 to +100°C Thanks to its robust construction, the Feutron TPK 3403/125 is a workhorse for standardized temperature testing. The primary areas of application for this model are: 1. Electronics and Component Testing This is the most common area of ​​application. It focuses on how components react to extreme temperatures: Functional Testing: Does the circuit board continue to operate flawlessly even at -40°C or +150°C? Burn-In Testing: Artificial aging of components through continuous operation at high temperatures to induce early-stage failures. 2. Materials Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in cold conditions? Deformation: Do composite materials warp when exposed to heat? Storage Testing: How stably do chemical substances or adhesives behave over extended periods at a constant temperature? 3. Quality Assurance (QA) Sample Testing: In-process testing conducted alongside production to ensure that manufacturing output adheres to specified temperature ranges. Standards Compliance Testing: Conducting tests in accordance with common industry standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions prior to mass production. Manufacturer: Feutron Model: TPK 3403/125 Temperature Range: -40 to +100°C Refrigeration System: Air-cooled condenser Temperature Stability: approx. ±0.1 to ±0.5 K Usable Chamber Volume: approx. 125 liters Refrigerant: R22 Operating Pressure: 23 bar Power Supply: 220/280V-3-50Hz Podpfx Aey Nynaofgspt Input Fuse Rating: 25 A Protection Class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!