Used Lubrication Bolt 75X145 for sale (5,004)

Condition: good (used), Technical Data for the Shelf Rack: Racking System: SSI Schäfer Type: R 3000 Technical Data on Installation: Number of rack rows: 01 pc. Rack length: 1,357 mm Number of bays per rack row: 01 pc. Scope of delivery includes: 02x Upright frames, used Material color: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bracing and base plates The uprights are pre-assembled Height: 2,278 mm Depth: 800 mm 05x Shelves, used Material color: Sendzimir galvanized Dimensions: 1,282 x 800 x 40 mm Weight | per unit: approx. 12.82 kg 01x Cross brace, used Designation: KV31313 Material color: Sendzimir galvanized Iisdpfxowvpwqe Acwsb Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is desired beyond that, additional costs will apply, which can be requested from us separately depending on the delivery location and scope of delivery.

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for the installation: Number of shelving rows: 1 unit Iedjw Hctajpfx Acwoib Shelf length: 5,335 mm Number of bays per shelving row: 4 units Number of levels: 6 units Scope of delivery includes: 05 x Upright frames, new Material finish: Sendzimir galvanized Frame profile dimensions: 31 x 60 mm Including cross straps and foot plates The uprights are pre-assembled 2,278 mm high 800 mm deep 24 x Shelf panel, used Material finish: Sendzimir galvanized Dimensions: 1,295 x 790 x 40 mm Weight per unit: approx. 12.82 kg 02 x Diagonal brace, used Designation: KV31313 Material finish: Sendzimir galvanized Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Any further transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: used, total length: 3,900 mm, total width: 1,500 mm, total height: 1,630 mm, number of shelf rows: 1, shelf length: 3,900 mm, shelf height: 240 mm, Mobile stacking rack. Rack weight 220 kg. Racks for storing heavy materials and products. Stackable and transportable by forklift, the rack is extremely versatile. It features a very sturdy construction with a shelf made of 80 mm steel profiles and sheet steel. Approximately 300 racks in varying technical conditions are available for sale. Iijdpfx Aswcdw Sjcwob The rack storage area is 5.23 m².

Condition: good (used), approx. 870 pcs. shelves SSI Schäfer R3000, shelves approx. 1,m x 0,40m - used - : Price per piece: only 8,50 € (net), packed and loaded ex site! Minimum purchase 1 pallet (approx. 180 pieces) Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: unknown dimensions: approx. 1m x 0,40cm 870 pcs. shelves Load capacity per shelf: min. 100kg Condition: good Iiodpfx Aceki T Akowob Available: immediately Location. Frankenberg / Saxony

Condition: good (used), approx. 24 pieces frame SSI Schäfer R3000, depth 30cm - used - : Price per piece: only 30.- € (net), packed and loaded ex site! Isdpeki Tz Aefx Acweib Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: unknown Frame height: approx. 2,28m Frame depth: 30cm Condition: good Available: immediately Location. Frankenberg / Saxony

Condition: good (used), Year of construction: 1999, functionality: fully functional, total length: 500 mm, total width: 1,060 mm, total height: 1,800 mm, -KOM 3166- Offered here is an SSI Schäfer boltless shelving unit in good condition. The maximum bay load is 1200 kg, and the maximum shelf load is 200 kg. Due to its low height, the rack is ideal for rooms with limited ceiling clearance. Iisdpfsxqdy Hox Acwob Available quantity: 20 units The racking system consists of: - 1x Schäfer storage bin LW 512 - 2x Schäfer storage bins LW 530 - 2x "Standard" shelves Rack dimensions: Height: approx. 1800 mm Depth: approx. 500 mm Width: approx. 1060 mm Height of storage compartments (from bottom to top): 1x lower standard shelf: approx. 250 mm high 2x Schäfer large storage bins: approx. 350 mm high 1x middle standard shelf: approx. 350 mm high 1x Schäfer small storage bin: approx. 200 mm high IMPORTANT! The height of the Schäfer storage bins can be adjusted individually using the brackets (see last photos). Additionally, an extra Schäfer storage bin of type LW 530 can be installed on the upper standard shelf with this racking system. This configuration is shown in the last listing images.

Condition: good (used), Year of construction: 1999, functionality: fully functional, total width: 1,060 mm, shelf height: 2,250 mm, support length: 500 mm, -KOM 3156- Offered here is an SSI Schäfer plug-in shelf rack in good condition. The maximum bay load is 1,200 kg, and the maximum shelf load is 200 kg. In total, we have 23 identical racks available. The rack consists of: Isdpfxjxqc Txs Acwoib - 2 x Schäfer storage bins LW 512 - 2 x Schäfer storage bins LW 530 - 3 x standard shelves Rack dimensions: Height: approx. 2,250 mm Depth: approx. 500 mm Width: approx. 1,060 mm Height of storage compartments (from bottom to top): 1 x lower standard shelf: approx. 200 mm high 2 x large Schäfer storage bins: approx. 350 mm high 1 x middle standard shelf: approx. 200 mm high 2 x small Schäfer storage bins: approx. 200 mm high 1 x upper standard shelf: approx. 300 mm high The height of the Schäfer storage bins can be individually adjusted using the mounting brackets (see last photos).

Condition: used, Year of construction: 2020, The XYZ Machine Tools XYZ CT65 LTY CNC turning centre in excellent condition with 12-station VDI 30 live tooling turret, Y-axis capability, hydraulic tailstock, chip conveyor, through-tool coolant, and automatic lubrication system. Designed for high-precision turning and mill-turn applications with bar capacity up to 65 mm. Machine Specification: ----- CONTROL Seiemns 828D with Shopmill Conversational and G-code programming capability Electronic handwheel for setup and jogging Fully interlocked safety guarding ----- CAPACITY Chuck size (main spindle): 200 mm Maximum swing: 400 mm Maximum machining diameter: 220 mm Maximum turning length: 490 mm Maximum bar capacity: 65 mm ----- TRAVEL Travel (X axis): 220 mm Travel (Y axis): ±35 mm Travel (Z axis): 500 mm Rapid traverse rate: 20 m/min Cutting feed rate: 0.01–10 m/min ----- MAIN SPINDLE Spindle nose: A2-6 Maximum spindle speed: 4,500 rpm Spindle bore: 76 mm ----- TURRET Turret type: 12-station VDI 30 power turret Number of tools: 12 Turning tool size: 20 x 20 mm Iodpfx Asy S A D Njcwoib Maximum boring bar diameter: 32 mm Live tooling maximum speed: 4,500 rpm ----- TAILSTOCK Tailstock taper: MT4 Quill diameter and travel: 60 mm x 90 mm Hydraulic tailstock Programmable hydraulic tailstock (optional) ----- COOLANT & LUBRICATION Through-tool coolant system Flood coolant system Automatic lubrication system Coolant tank capacity: 80 litres Oil skimmer (optional) Oil mist device (optional) Coolant gun (optional) ----- ACCESSORIES Chip conveyor and chip bin Parts catcher system Renishaw automatic tool setting arm Air gun Transformer Leveling bolts and blocks Tool kit ----- MACHINE SIZE Machine dimensions (L x W x H): 3240 mm x 1788 mm x 1838 mm Door opening width: 668 mm Machine weight: 4,400 kg Control: Siemens 828D Spec: Spindle bore 65 mm | Max Swing 400 mm | Travel X 220 Z 500 Y +-35 mm Accessories: Chip conveyor and chip bin, Parts catcher system, Renishaw automatic tool setting arm, Air gun

Condition: like new (used), Year of construction: 2021, operating hours: 6,133 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, total height: 1,800 mm, total length: 2,435 mm, total width: 1,875 mm, rotational speed (max.): 1 rpm, rotational speed (min.): 4,500 rpm, overall weight: 1,970 kg, table load: 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine with high precision, long service life, and maximum operator comfort. Multi-ribbed cast construction ensures full operational performance throughout the entire working area. Control System SIEMENS 840D SL Path Control Working Area X / Y / Z 620 / 350 / 400 mm Drive System 2-stage, high-torque main gearbox with automatic gear shifting Drive power 100% / 25% duty cycle: 5.5 / 7.0 kW Torque 100% / 25% duty cycle: 210 / 340 Nm Infinitely variable speed range 0 - 4500 rpm Digital Feed Infinitely adjustable feed on all axes. Feed range 0 - 2000 mm/min, infinitely variable Rapid traverse 5 m/min Handwheel resolution 2.5 mm (X / Y / Z axis) Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill incl. manual clamp, 80 mm Tool holder SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – Standard Additionally, milling head is movable along Y-axis by 150 mm. For horizontal machining, the milling head does NOT need to be removed—simply slide it into its rear rest position. Fixed Angle Table Clamping surface 820 x 420 mm T-slots: 1 / 14 H7 reference slot 5 / 14 H12, 63 mm spacing Table load capacity: 350 kg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable on all axes Main spindle motor with spindle speed brake function Oriented spindle stop; vertical and horizontal spindle for tapping cycles without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated scale rings on all axes Iisdpfx Aoy R Tctocwob Precision ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Control cabinet compactly integrated into machine Splash guard cabin with optimal, user-friendly access Safety glass window at the rear of the cabin Open at top—front and right doors, including sliding door at the front with safety interlock Interlocked when unpowered; additional service opening on left cabin side—bolted, removable Freestanding mobile coolant tank, 80 liters Dimensions (LxWxH): 1250x460x200 mm Automatic central lubrication Steel lamella cover for Z-axis guide protection Halogen machine lamp, 24V Easy-to-operate milling guard with plexiglass pane Operator's manual, spare parts list, and electrical diagram in paper form Set of machine feet Transport bar and retaining rings for 2-strand lifting tackle Color: light gray RAL 7035 and telegray RAL 7045, fine texture Space Requirement – Connection Values Machine weight approx. 1970 kg Footprint (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. fuse protection: 35 A NH Network type: TN-S Connection type: fixed connection Further information available in the PDF attachment. The machine is supplied without tools and without accessories.

Condition: used, maximum load weight: 21,130 kg, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 11/2026, total width: 2,540 mm, total height: 1,980 mm, Equipment: ABS, Kässbohrer SLL 2-Axle Lowbed Trailer with Hydraulic Steering Highlight: Optionally available for rental as a complete combination together with the truck shown in the photo. Manufacturer: Kässbohrer Type / Vehicle Code: K.SLL 2 / 2H ? 18 / 20 Vehicle Type: Lowbed Semi-Trailer Country of Registration: Germany Brand: Kässbohrer Chassis Color: RAL 3020 Traffic Red Dimensions & Weights External Length: 13,210 mm * Overall Width: 2,540 mm * Fifth Wheel Height (H5): 1,250 mm * Platform Height (unladen): 910 mm * Platform Height (laden): 300 mm * Platform Length: 6,810 mm * Extension: 5,550 mm * Gooseneck Length: 3,600 mm * Rear Swing Door: 2,100 mm * Platform Thickness: 200 mm * Wheelbase: 10,530 mm * Axle Spacing: 1,360 mm * Unladen Weight: approx. 12,873 kg (±3%) * Gross Vehicle Weight (40 / 60 / 80 km/h): 42,000 kg * Total Axle Load: 24,000 kg * Perm. King Pin Load: 18,000 kg (40 / 60 / 80 km/h) ----Chassis & Axles 2 Axles * 2 hydraulically steered axles * Axles: BPW * Suspension: Air suspension * Suspension stroke: 260 mm (190 mm / -70 mm) * Additional lifting of the driving level by 40 mm possible * Load gauge for axle load display * Semi-automatic tracking of steered axles with warning light sensor Isdpfx Asycnbaocwsib ----Brake System WABCO EBS 2S/2M * ABS (Anti-lock Braking System) * RSS (Roll Stability Support) * Brake system in accordance with UN ECE R13 ----Electrics & Lighting 24 V LED lighting system * 2 × 7-pin + 1 × 15-pin socket * LED brake lights * LED rear and fog lights * Electrical system compliant with UN ECE R48 & ADR * LED work lights at rear (2 units, automatic reverse activation) * LED beacon (1 unit) ----Tires & Rims Tire size: 245/70 R17.5 * Tires: M+S * 3PMSF (winter suitable) * Tire pressure monitoring system in accordance with R141 * Number of wheels: 9 complete wheels * Rims: Steel rims (Kässbohrer selection) * Spare wheel holder: 1 unit on gooseneck ----Steering & Operation Hydraulic steering for both axles * Control panel in the vehicle * Radio remote control for external steering * Multifunctional WABCO Smartboard * Axle load indicator * Suspension control * Tire & brake wear monitoring * Breakdown & system monitoring ----Chassis & Frame High-strength steel S700 MC (ISO 1726) * Welded bogie-bed connection * Partial metallizing (85% zinc / 15% aluminum) on outer frame & gooseneck * Adjustable and detachable gooseneck * 1 × 2 hydraulic cylinders, 220 bar operating pressure * King pin: 2 inch, bolted * King pin position: single ----Platform & Body 3 removable platforms with hardwood floor * Dimensions per platform: 100 × 1,300 × 2,115 mm * Weight per platform: 225 kg * Per platform 2 × lashing rings with 8,000 kg tensile force * Platform extension: 225 mm, galvanized * Extension clamps: 12 × 2 units, galvanized ----Load Securing Lashing rings: * 1 × 2 units 13.4 t on gooseneck * 7 × 2 units 13.4 t * 4 × 2 units 8 t in the lowbed * 2 × 2 units 13.4 t * 3 × 2 units 8 t on rear platform * Stake pockets: * 6 × 2 units in pool (50 × 100 mm) * 3 × 2 units at rear (50 × 100 mm) ----Attachments & Accessories Aluminum front panel for gooseneck: 360 × 1,550 mm * Aluminum side panels: 360 × 1,900 mm * Aluminum rear panel: 360 × 2,480 mm * Toolboxes right & left (500 × 350 × 400 mm) * Central lubrication system * Side underrun protection according to ECE R73

Condition: like new (used), Year of construction: 2021, operating hours: 5,999 h, functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 2,000 mm, travel distance X-axis: 620 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, quill travel distance: 80 mm, spindle speed (max.): 4,500 rpm, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, table length: 820 mm, table width: 420 mm, rotational speed (max.): 4,500 rpm, rotational speed (min.): 1 rpm, overall weight: 1,970 kg, space requirement width: 2,435 mm, space requirement length: 1,875 mm, space requirement height: 1,800 mm, workpiece weight (max.): 350 kg, Equipment: rotational speed infinitely variable, Universal Milling and Drilling Machine High-quality, robust machine offering high precision, long service life, and maximum operating comfort. Multiple ribbed cast construction ensures full performance across the entire working area. Control System SIEMENS 840D SL path control Working Range X / Y / Z: 620 / 350 / 400 mm Drive System 2-stage main gearbox with high torque and automatic gear shifting Drive power 100% / 25% DC: 5.5 / 7.0 kW Torque 100% / 25% DC: 210 / 340 Nm Speed range: 0 - 4500 rpm, infinitely variable gearbox Digital Feed Infinitely variable feed rate on all axes Feed range: 0 - 2000 mm/min, infinitely adjustable Rapid traverse: 5 m/min Handwheel rotation: 2.5 mm per X / Y / Z axis Ijdpfx Acjy R Ebzswsib Milling Head - Vertical Vertical milling head swivels +/- 90° (180°) Extendable vertical quill with manual clamping, stroke 80 mm Tool holder: SK 40 DIN 69872 Hydromechanical clamping system DIN 69872 – standard Additionally, the milling head can be shifted 150 mm on the Y-axis. For horizontal machining, the milling head does NOT need to be removed—simply slide it back into the rear rest position. Rigid Angle Table Clamping surface: 820 x 420 mm T-slots: 1 piece/14 H7 alignment slot, 5 pieces/14 H12, spacing 63 mm Table load: 350 kg Standard Equipment Direct linear measuring systems on all axes Wear-free digital drive, infinitely variable, for all axes Main spindle motor with spindle speed braking function Oriented spindle stop, vertical & horizontal, with threading cycle without compensation chuck Swiveling milling head with extendable quill Automatic axis feed in X, Y, Z with rapid traverse Mechanical safety handwheels with graduated ring on all axes Ball screws on all axes Electronic overload protection on all axes 2-channel emergency stop system Compact electrical cabinet integrated with machine Splash guard enclosure with optimal operator access Toughened glass window on rear of enclosure Top open, front and right door plus sliding door on front, secured with interlock switch Locked when unpowered; additional maintenance opening on left side—bolted, removable Freestanding mobile coolant tank, 80 liters (dimensions: 1250x460x200 mm) Automatic central lubrication Steel telescopic cover to protect Z-axis guideways Halogen machine lamp V24 Easy-to-use milling guard with plexiglass pane Operator manual, spare parts plan, and electrical diagram in paper form Set of machine feet Transport rod and stop rings for 2-strand lifting gear Color: Light grey RAL 7035 and tele grey RAL 7045 fine texture Footprint – Electrical Specifications Machine weight approx. 1970 kg Space requirement (W x D): 2435 x 1875 mm Power supply: 3x400 V AC 50Hz Power consumption: 17 kVA Max. pre-fuse: 35 A NH Network type: TN-S Connection type: fixed connection For further information, please refer to the PDF attachment. The machine is supplied without tools or accessories.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, total height: 1,850 mm, total length: 1,960 mm, total width: 1,480 mm, feed length X-axis: 800 mm, feed length Y-axis: 415 mm, workpiece weight (max.): 500 kg, feed rate Z-axis: 360 m/min, grinding wheel diameter: 350 mm, distance table to spindle center: 520 mm, table length: 800 mm, table load: 500 kg, type of input current: three-phase, table width: 400 mm, grinding wheel width: 30 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,800 kg, grinding spindle motor power: 4 W, SURFACE GRINDER SP-4080AHR • Rapid vertical feed to the workpiece • Coolant tank with magnetic filter • Digital readouts on 2 axes • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross guides hardened and ground • Table with longitudinal flat guide and cross triangular guide • Electromagnetic chuck • Balancing arbor • Grinding wheel flange • Accessibility for operators with disabilities Iiodpfx Aey Sgdgjcweb • Grinding wheel with holder • Wheel dresser • Cooling system • Central lubrication system • Work area lighting • Set of basic adjustment tools • Table cover • Leveling bolts and washers • User manual in Polish • CE Declaration of Conformity Working table size mm 400x800 T-slots (number x width) pcs/mm 1/14 Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance from spindle axis to table mm 520 Longitudinal feed of working table mm/min 3-20 Table feed Automatic mm/min 0-8 Rapid mm/min 600 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Vertical feed of spindle head Automatic mm/min none Rapid mm/min 360 Manual / per graduation mm/graduation 0.01 Manual / per revolution mm/rev 2 Grinding wheel Rotational speed rev/min 2800 Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface finish Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. working table load kg 500 Overall dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Condition: used, mileage: 565,000 km, power: 350 kW (475.87 HP), first registration: 09/2018, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cooling unit, cruise control, parking heater, power assisted steering, soot filter, traction control, trailer coupling, D6G Automatic climate control, Q4Z saddle coupling, low-maintenance, lubricated locking mechanism, A1C front axle 7.5 t, A1Z front axle, cranked design, A2E rear axle, 440 mm crown wheel, hypoid, 13.0 t, A2X rear axle with active, regulated lubrication, B1B electronic braking system with ABS and ASR, B1D electronic air supply unit, medium capacity, B1F heater for electronic air supply unit, B2A disc brakes on front and rear axle, B3H secondary water retarder, B4A condensate monitoring for compressed air system, B4M compressed air tank, steel, B5J brake and electrical connections, low position, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C5B tread plate over frame, partial coverage, C5D step access, behind cabin, left side, C5P frame bolted, C6C steering, single-circuit, C6P power steering pump, electronically controlled, C6Q stabilizer, front axle, C7F front underrun protection (ECE), aluminum, C7T integrated rear section, C8C rear axle mudguards, 2500 mm vehicle width, C8H 3-piece mudguards with EC spray protection, C8I spray protection (EC), front, C8Y underbody paneling, aerodynamic, C8Z side paneling, aerodynamic, D0L smoker’s package, D0S compressed air connection in cab, D1C driver’s comfort suspension seat, D1N functional passenger seat, D2N seatback release, driver’s seat, D3A upper comfort bed, wide, level-adjustable, D3B lower comfort bed, D3Q velour seat cover, driver’s seat, D3T velour seat cover, passenger’s and center seat, D4T curtain, crosswise in front of bed(s), D4Y sun blind, side, driver’s side, D5Y rubber mats. Iedpfx Aceifx Nbowjib We are available by phone Monday to Friday until 8:00 pm and Saturday until 4:00 pm!! Additional information: Leasing/financing and trade-in possible!! Errors and interim sale reserved!! All information is non-binding ... more on our homepage

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable Iiodpfxey Hm E He Acwjb • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: Iisdpfjy Hm Etjx Acwob • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs Iiodsy Hm Eyepfx Acwsb • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: used, Year of construction: 2019, Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass. Accessories: Total enclosure, Coolant system, Equipment for robot operation with automatic loading door Iiodpfxsyvgf De Acweb ND 230 loader Measuring device for measuring saw blades Chip breaker grinding attachment Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm. Grinding speed and grinding path stepless adjustable for each machining surface on the tooth. Automatic central lubrication Software package for oscillation grinding at rake and clearance angles Automatic shut-off flap Automatic fire extinguishing system Electrostatic oil mist separator N281 Measuring tool Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180 Sawblade holder with guide bushing Ø 16 mm Saw holder >ø320 Grinding wheel mounting flange for chip breaker Centering ring for mounting bolt Ø 16 mm for saw bore Ø 32 mm Centering ring for mounting bolt Ø 16 mm for saw bore Ø 40 mm Centering bolt Ø 10 mm Machine light Sawblade blow-off pistol Data input station DES 400 3 loading trolleys with 30 mm mandrels Oil drip tray Automatic central lubrication. Saw blade diameter: 200 - 840 mm Bore diameter: from 16 mm Sheet thickness: up to 15 mm Tooth pitch: from 6 to 180 mm Cutting length: up to 25 mm Rake angle: from - 35 ° to + 20 ° Clearance angle: 0 ° - 25 ° Angled grinding on the back of the tooth: up to 45 ° Angled grinding on the tooth face: up to 30 ° Angled grinding on the negative tooth face: up to 30 ° Tooth height difference: any Grinding wheel diameter: Max. 200 x 32 mm Dimensions W x D x H: 2770 x 1900 x 2058 mm Weight: 4700 kg Connected load: 8.7 kVA (400 V / 50 Hz) colour: gray RAL 7045 / gray RAL 7047

Condition: new, Year of construction: 2025, pressing force: 200 t, stroke length: 200 mm, table width: 1,000 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, Eccentric presses are mechanical press types operated by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. H-type (straight-side) eccentric presses provide high stability and process safety for large table and heavy die applications, thanks to their rigid frame construction. CRONOSSTECH CEHP 200 – H-Type Eccentric Press 200 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. Featuring a monoblock frame, 8-guided ram system, hydraulic overload safety, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 1000×2000 mm large table - Die/equipment protection with hydraulic overload safety - Controlled and user-friendly operation via PLC + touchscreen - High operator safety with light curtain protection (LEUZE) - Fast production change-over with 99 die memory settings Areas of Application - Punching/cutting/forming applications requiring a large table - Serial production with automated feeding lines - Heavy-duty dies and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch–brake • Additional bolted T-slotted plate • 8-guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse motion • Hydraulic overload safety device • Motorized ram adjustment mechanism • Light curtain protection • Enclosed oil reservoir with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety door at table front • Dies with custom specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower table usable area: 1000×2000 mm Upper table usable area: 1000×2000 mm Iijdpfx Ajx N Ruqocweb Stroke length (fixed): 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max. shut height: 600 mm Min. shut height: 480 mm Side window dimensions: 600×600 mm Adjustment (ram adjustment): 120 mm Number of connecting rods: 2 pcs Number of eccentric shafts (cranks): 2 pcs Safety device: Hydraulic Switchgear brands: Siemens – Schneider Lubrication system: Automatic Display / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 settings Mounting type: Floor standing Body type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. machine dimensions (L×W×D): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: Please let us know if you require changes to the technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: – MODEL 2024 • Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. • A detailed vehicle specification can be found in the attached documents. • Oil pump type: LEDUC • Fifth wheel with sliding mechanism and self-lubricating (type Jost JSK), mounted on the subframe • Front support cover with company logo (laser-cut/smooth steel sheet) Bodywork: Crane Exchange System: The superstructure, including the crane, can be dismounted, and a fifth wheel can be mounted on the chassis in its place. The combination of crane, superstructure, and fifth wheel is also possible. The vehicle features two fifth wheels in total, both longitudinally adjustable. • Installation/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: Front • Drop-side flatbed design as steel welded construction, removable • Length approx. 380 cm, width approx. 248 cm • Platform body painted. RAL chassis color • Removable aluminum side walls, brand Suer, height 600 mm, anodized design with steps; removable stake pockets by Kinngripp • Standard platform floor made of welded, checkered steel plate, 4 mm, painted in RAL chassis color • 6 retractable lashing rings 2,500 daN each side, mounted in a perforated strip with flexible positioning • 4 lashing brackets for chains 6,500 daN (2x at the front, 2x at the rear of the superstructure) • Robust front wall consisting of a welded frame, welded 4 mm steel plate, 5 accessory hooks; front wall height approx. 1,300 mm, steel painted, with 2 foldable lashing eyelets for tension belts, welded on • Trim panels, mudguards made of aluminum tread plate (sandblasted, powder coated, and painted) • Multifix lashing pockets: 2 rows, approx. 80 cm distance from the front wall and from the rear • Holders (for support plates, crane pads) made of galvanized steel • Additional supports installed under the chassis • Mounting of underride guard at the rear and additional supports, with installation of hydraulic and electrical connections • Duomatic and red/yellow connections, at the front for semi-trailers, and at the rear for trailers • New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed and parametrized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions • For a detailed crane specification, please refer to the attached documents • Series 5450 Iijdpoy E A Sasfx Acwob • Initial inspection and parametrization of the crane according to TÜV-UVV regulations and load charts of FASSI loader cranes Additional Equipment and Crane Accessories: • 5 crane support plates with holders, arranged as per manufacturing drawings • AWC (automatic cable length control) • Operating manual, maintenance manual, and crane inspection booklet Lighting: • 2 x LED AS integrated into the front wall • 2 x rotating beacons on the FH roof • 2 x strobe lights in the hood • 2 x LEDs under the body at the rear, left and right, arrangement as agreed • 4 x LED AS, two on each side under the body near the support legs • 4 yellow LED light strips, one on each support leg Further information available upon request.

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Ijdpevvkfdofx Acwoib

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm Iiedsy Ei R Aepfx Acweb • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Type: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel coupling with sliding mechanism and self-lubricating (Jost JSK type), mounted on support frame • Reversing camera fully installed Bodywork: • Execution of all chassis modifications required for crane installation, including removal and installation of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork modifications are carried out in strict compliance with the bodybuilder guidelines of the respective chassis manufacturer and executed in premium quality. • Complete assembly of a proprietary designed and in-house manufactured special subframe made of fine-grained steel for crane and superstructure. The fully welded and bolted subframe to the chassis frame guarantees exceptional torsional rigidity and outstanding stability for the crane vehicle. A unique feature is the subframe construction, executed to the highest quality and coated in chassis color. • Installation/bolting of the crane and main outrigger support on the subframe. Installation of all hydraulic and electrical connections. Installation position: Front • Removable drop-side platform in steel/welded construction • Length approx. 380 cm, width approx. 248 cm Iiedpfxey Ei R No Acwjb • Platform body painted in RAL (chassis colour) • Removable aluminium side boards by Suer, height 600 mm, anodised finish with step treads, removable Kinngripp stakes • Standard platform floor with welded 4 mm steel checker plate painted in RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, set in perforated rails for flexible arrangement • 4 chain lashing points 6500 daN (2 front, 2 rear on body) • Robust front wall made from welded frame, welded 4 mm sheet steel and 5 accessory hooks, wall height approx. 1300 mm, painted steel version, with 2 folding lashing eyes welded on for securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted); please specify RAL color • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted); specify RAL color; size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stake pockets, 2 rows (as agreed), approx. 80 cm from front and rear walls • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizing support mounted under chassis • Installation of underride protection at rear and additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections at front for semi-trailers and also at rear for trailers New crane, FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 beacons on the FH roof • 2 strobe lights in engine hood • 2 LED lights under bodywork at rear, left and right, position per agreement • 4 LED working lights, 2 each left and right

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: Ijdpfx Acey Ei Rvswoib • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall Isdpjydggqofx Acwjib • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 120 mm, total height: 1,820 mm, total width: 1,780 mm, total length: 1,400 mm, table width: 500 mm, table length: 900 mm, workpiece weight (max.): 190 kg, distance table to spindle center: 390 mm, Equipment: documentation/manual, Table surface (angled table): 900 x 500 mm Max. Workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Isdpfxehu Rwfo Acwsib Travel Z: 380 mm Quill travel Z1: 120 mm Speed range: 40 - 2000 rpm Gear stages: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1560 kg including extensive standard accessories, e.g: Work area cladding 3-axis digital readout CONTUR Hydraulic tool clamp for vertical spindle Tool holder SK 40, DIN 69871A, tightening bolt DIN 69872, incl. hydraulic unit Monitored spindle protection 3 conventional handwheels Complete electrical equipment for three-phase current 400 V, 50 Hz Ball screws for X, Y and Z axes Vertical milling head Fixed angle table 900 x 500 mm clamping surface Swivel device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guideways guideways Automatic central lubrication for the axis and ball screws Coolant system with pump Set (4 pcs.) of bearing elements Including tool holder package consisting of: 1 x collet chuck ER40 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)